PRECISION CONTROL VALVE MANUFACTURER

Selector Valves Electric Operators

Venting Valves Pneumatic Operators
Stack Valves Special Applications

Conant Controls, Inc.

Toll Free 1-800-401-4647 or http://www.conantcontrols.com
P.O. Box 310 Phone: (781) 395-2240
427 Riverside Avenue Fax: (781) 395-7247
Medford, MA 02155 Email: Sales@conantcontrols.com
 PRECISION SELECTOR VALVES
Conant was established in The following are just some of the features that have made Conant

1856 and through the years it has Controls Valves among the most reliable in the industry:

built its reputation on manufactur-

Self Lubricating
ing and design excellence and
Not just a coating, but solid Teflon ®, used in the sleeve or rotor of the
product reliability. Conant Controls
valve has natural, self lubricating properties and a low coefficient of friction.
has designed its complete line of
Therefore, there is no need for oil or grease. Teflon ® has lower friction than any
Precision Selector Valves, Stack other solid material including graphite and molybdenum disulfide, and its
Valves, and Control Vent Valves to lubricity results in smoother movement and operation of the valve.
offer the systems’ designer a truly
dependable valve of the highest Chemical Resistance
quality which has been manufac- Valves are completely resistant to nearly all chemicals, gases, and sol-

tured to rigid specifications in order vents, such as strong caustics, sulfuric and hydrofluoric acids, aqua regia, and
solvents, such as aliphatic and aromatic hydrocarbons, alcohols, esters,
to provide long life and trouble-
ketones, and ethers up to their boiling points.
free operation. The choice of valve
materials, porting arrangements, Temperature and Pressure Ranges:
and sizes enables the selection of -60°F to +400°F
the most appropriate valve for the Teflon ® offers this wide temperature range, and with the use of Teflon ® we
most efficient system design. Each are able to produce a valve that has exceptional thermal stability while main-
valve is air-tested under water taining a low coefficient of friction. Therefore, the valve is suitable for continuous

before shipment to guarantee service at either high or low temperatures. The pressure range for maximum

product reliability. Conant Controls continuous service is from 0-1000 PSI (stainless steel).

Valves can be used in a wide

Wear Resistance
variety of applications, including
In operation, thin films of Teflon ® are transferred from the rotor to the
Instrumentation, Research and
mating surface (or vice versa) in the body of the valve until it is coated with
Development, Pilot and Process
Teflon ®. Thus, the condition becomes one of Teflon ® sliding against Teflon ®.
Sampling, Gas Chromatography, After the initial break-in period, this produces a surface with extremely low wear
Complex Fluid Transfer Circuitry, and eliminates fretting and galling.
Remote Control and Positioning,
and Switching and Transfer
Systems. Many years in the field
have proven that Conant Controls Warranty
Conant Controls, Inc. warrants its products against defects in manufacturing or design for a period of one
Precision Selector Valves have
year, from date of delivery if such products are used for the purpose for which they are manufactured and
been able to withstand demanding sold. This warranty is limited to the furnishing of replacements for defective products, and Conant Controls,
Inc. shall not be liable for any labor, consequential damages, down-time or any loss, damage or expense of
applications under a wide range
any kind arising out of defective products.
of pressure, temperature, and To the best of our knowledge the information contained herein is accurate. However, Conant Controls, Inc.
corrosive conditions. assumes no liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of the suitability of any information or material for the use contemplated, or the manner
Conant also welcomes the of use, is the sole responsibility of the user.
opportunity to work with design The foregoing warranty is exclusive and in lieu of any and all other warranties, express or implied. No
warranty of merchantability, no implied warranty of fitness for any particular purpose, and no implied
engineers in developing valves that
warranty arising by usage of trade, course of performance is given by seller or shall arise by or in
are not covered in this standard connection with this sale and/or the seller’s and/or buyer’s conduct in relation thereto or to each other, and
in no event shall seller be liable on any such warranty with respect to any product.
catalog line.
BAR STOCK BODIES
2 • 3 • 4 • 5 Way
1/ " - 1/ " - 3/ " - 1/ " I.P.S Teflon® Sleeve
8 4 8 2

6 • 7 • 8 • 9 • 10 • 11 • 12 Way and 1⁄ 16 " l.P.S. units available

Bar Stock bodies are for more severe service applications. They are also
available in the widest ranges of sizes and materials of all Conant Controls Valves.
They can also be adapted to motorized operation.

MATERIALS ▼
Brass, Aluminum, and 316 Stainless
Steel. Monel ® , Inconel ® , Hastelloy ® , H

Titanium, Carpenter 20Cb, and Nickel ▼

▼
are available.
G TAP SIZE
PRESSURE RANGE
D
▼

▼
Brass, Aluminum 0-250 PSI ▼

Stainless Steel 0-1000 PSI E

▼ ▼
31⁄2" I
▼
▼

C
▼ ▼
Viton®
F O-Ring
#300 Lever Handle Seal
(Standard on 3⁄8" and 1⁄2" sizes) B
▼
21⁄4" Teflon®
▼
▼

Sleeve
▼
Stainless
#250 Lever Handle Steel Rotor
A
▼
▼

(Optional on 1⁄8" and 1⁄4" sizes)

Front View Dimensions (Inches)

Panel Mount Part No. Pipe Thread A B C D E F G H I
2 WAY DRILLINGS 1 7 3 1
CBR2TSL007 ⁄8 2 2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 3 1
CBR2TSLXXX ⁄4 2 2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
3 1 7 9 1 3 1 1
CAL2TSLXXX ⁄8 2 ⁄2 2 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
1
HANDLE TURN 90° C2316XXX ⁄2 21⁄2 27⁄8 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
3 WAY DRILLINGS CBR3TSLXXX 1
⁄8 2 2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 3 1
CAL3TSL010 ⁄4 2 2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
3 1 7 9 1 3 1 1
CAL3TSLXXX ⁄8 2 ⁄2 2 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
1
HANDLE TURN 90° C3316XXX ⁄2 21⁄2 27⁄8 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
4 WAY DRILLINGS CBR4TSLXXX 1
⁄8 2 2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 3 1
CAL4TSLXXX ⁄4 2 2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
3 1 7 9 1 3 1 1
C4316012 ⁄8 2 ⁄2 2 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
1
HANDLE TURN 90° C4316XXX ⁄2 21⁄2 27⁄8 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
5 WAY DRILLINGS CBR5TSLXXX 1
⁄8 2 21⁄2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 ⁄4 O.D. x 1⁄8
3

1
CAL5TSLXXX ⁄4 2 21⁄2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 ⁄4 O.D. x 1⁄8
3

3 1 3 9 1 3 1 1
C5316XXX ⁄8 2 ⁄2 3 ⁄4 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
1
HANDLE TURN 360° CBR5TSL015 ⁄2 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
XXX = Pipe size or 1⁄8" = 007, 1⁄4" = 010, 3⁄8" = 012 and 1⁄2" = 015.
Series CBR2TSL, CBR3TSL, CBR4TSL, CBR5TSL — Brass body, Teflon® sleeve, precision tapered S.S. rotor.
Series CAL2TSL, CAL3TSL, CAL4TSL, CAL5TSL — Aluminum body Teflon® sleeve, precision tapered S.S. rotor.
Series C2316, C3316, C4316, C5316 — Type 316 S.S. Body, Teflon® sleeve, precision tapered #316 S.S. rotor.
NOTE: 2-Way valves are normally furnished ELL-drilled; optional straight-through or slotted porting available at no extra charge when requested. Valves having 90° rotation are
equipped with mechanical stops. Detent positioning at extra cost on valves with greater than 90° rotation (i.e., 5-Way valve). Extra charge for special porting.

3
 CONTROL VENT
Series 180 and Series 360
1/ " - 3/ " - 1/ " I.P.S Teflon® Sleeve
4 8 2

The Conant Control Vent Selector Valve can accomplish in one

valve what until now could only be achieved by using a number of
selector valves. It can operate any one control valve while simultane-
ously venting to the atmosphere all the remaining valves connected to
it. There are two series of Control Vent Valves: Series 180, which offers
180° rotation for servicing up to three control valves, and Series 360,
which offers 360° rotation for servicing up to four control valves.

MATERIALS ▼
Brass, Aluminum,
316 Stainless Steel. H
PRESSURE RANGE
▼
Brass, Aluminum 0-250 PSI

▼
Stainless Steel 0-1000 PSI G TAP SIZE
D

▼
▼

31⁄2" E
▼

▼
▼ ▼

▼
I

▼
C
▼ ▼
#300 Lever Handle
(Standard on 3⁄8" and 1⁄2" sizes) F
B
▼
21⁄4" ▼
▼

#250 Lever Handle

(Optional on 1⁄8" and 1⁄4" sizes)
A

▼
Pipe Dimensions (Inches)
Part No. Description Thread A B C D E F G H I
1
C180B010 Brass body, Teflon® sleeve, ⁄4 2 21⁄2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
C180B012 stainless steel rotor. 3
C180B015 ⁄8 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1
⁄2 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1 1 7 3 1 3 3
C180A010 Aluminum body, Teflon sleeve,
®
⁄4 2 2 ⁄2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x 1⁄8
C180A012 stainless steel rotor. 3
C180A015 ⁄8 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1
⁄2 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1
C180S010 316 S.S. body, Teflon® sleeve, ⁄4 2 21⁄2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
C180S012 stainless steel rotor. 3 1 3 9 1 3 1 1
C180S015 ⁄8 2 ⁄2 3 ⁄4 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
1
⁄2 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1
C360B010 Brass body, Teflon® sleeve, ⁄4 2 21⁄2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
C360B012 stainless steel rotor. 3
C360B015 ⁄8 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1 1 3 9 1 3 1 1
⁄2 2 ⁄2 3 ⁄4 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
1
C360A010 Aluminum body, Teflon® sleeve, ⁄4 2 21⁄2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
C360A012 stainless steel rotor. 3
C360A015 ⁄8 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1
⁄2 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1 1 7 3 1 3 3
C360S010 316 S.S. body, Teflon sleeve,
®
⁄4 2 2 ⁄2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x 1⁄8
C360S012 stainless steel rotor. 3
C360S015 ⁄8 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1
⁄2 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4

4
 Highly Polished Surface

Viton® O-Ring Seal

Teflon® Sleeve

Vent

Stainless Steel Rotor

Bar Stock Bodies in Brass,

Aluminum, or 316 Stainless Steel

Series 180
For operating from one to three control valves. An “OFF” position can be provided by blocking one
of the ports. Mechanical stops at 0° and 180° and a mid-position detent.

Series 360
For operating from one to four control valves. 360° rotation, detent positioning every 90°. Can operate
one valve while venting other three through special ports in the body of the valve.

5
 STACK SELECTOR VALVES
2 • 3 • 4 • 5 Way
2, 3, 4, 5 Stack

Conant Stack Valves offer various

combinations of porting arrangements
to suit your requirements for more
simplified piping configurations. These
units are compact, require low torque,
and eliminate the need for gear sets and
other mechanical arrangements while
possessing the capability of handling up
to five separate switching arrangements.
MATERIALS
Brass, Aluminum, 316 Stainless Steel
PRESSURE RANGE
Brass, Aluminum and
316 Stainless Steel 0-150 PSI

31⁄2"

▼
#300 Lever Handle
(Standard on 3⁄8" and 1⁄2" sizes)

CONANT QUALITY AND RELIABILITY

Stainless Steel Stop Pin

Teflon ® has lower fric-
tion than any other solid
material and its lubricity
O-Ring Seal
results in smoother
movement and operation
of the valve. Teflon ® also
offers a wide temperature Teflon® Sleeve

range with exceptional

thermal stability. Valves are Stainless Steel Rotor
completely resistant to
nearly all chemicals, gases,
Bar Stock Body
and solvents.

O-Ring Seal

6
 G TAP SIZE

▼
▼

D ▼

▼
▼
E
▼ ▼
I

▼
▼
C
▼ ▼

F2

▼
▼
B2
J
▼

▼
5 Way • 5 Stack 2 Way • 2 Stack 4 Way • 4 Stack
1
⁄8" I.P.S. 1
⁄2" I.P.S. 1
⁄4" I.P.S.
A2

▼
▼
Front View Part No. Pipe Dimensions (Inches)
Panel Mount (2-STACKS) Thread A2* A3 A4,5 B2* B3 B4 B5 C D E F2* F3* F4,5* G H I J
1
2 WAY DRILLINGS
CBR2TSLB2007 ⁄8 2 21⁄4 21⁄2 33⁄8 37⁄8 5 57⁄8 9
⁄16 31⁄2 3
⁄4 11⁄4 11⁄2 11⁄2 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8 7
⁄8
1
CBR2TSLB2XXX ⁄4 2 21⁄4 21⁄2 33⁄8 37⁄8 5 57⁄8 9
⁄16 31⁄2 3
⁄4 11⁄4 11⁄2 11⁄2 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8 7
⁄8
3 1 3 1 9 1 3 1 1 1 1 1
CAL2TSLA2XXX ⁄8 2 2 ⁄2 N/A 3 ⁄8 5 ⁄4 N/A N/A ⁄16 3 ⁄2 ⁄4 1 ⁄4 1 ⁄2 N/A ⁄4–20TH’D 2 1 O.D. x ⁄4 1 ⁄4
1 1 3 1 9 1 3 1 1 1 1
C2316S2XXX ⁄2 2 2 ⁄2 N/A 3 ⁄8 5 ⁄4 N/A N/A ⁄16 3 ⁄2 ⁄4 1 ⁄4 1 ⁄2 N/A ⁄4–20TH’D 2 1 O.D. x ⁄4 11⁄4
HANDLE TURN 90°

1
3 WAY DRILLINGS CBR3TSLB2XXX ⁄8 2 21⁄4 21⁄2 33⁄8 37⁄8 5 57⁄8 9
⁄16 31⁄2 3
⁄4 11⁄4 11⁄2 11⁄2 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8 7
⁄8
1 1 1 3 7 7 9 1 3 1 1 1 1 3 3 1 7
CBR3TSLB2010 ⁄4 2 2 ⁄4 2 ⁄2 3 ⁄8 3 ⁄8 5 5 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄4 1 ⁄2 1 ⁄2 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x ⁄8 ⁄8
3 1 3 1 9 1 3 1 1 1 1 1
CAL3TSLA2XXX ⁄8 2 2 ⁄2 N/A 3 ⁄8 5 ⁄4 N/A N/A ⁄16 3 ⁄2 ⁄4 1 ⁄4 1 ⁄2 N/A ⁄4–20TH’D 2 1 O.D. x ⁄4 1 ⁄4
1 1 3 1 9 1 3 1 1 1 1
C3316S2XXX ⁄2 2 2 ⁄2 N/A 3 ⁄8 5 ⁄4 N/A N/A ⁄16 3 ⁄2 ⁄4 1 ⁄4 1 ⁄2 N/A ⁄4–20TH’D 2 1 O.D. x ⁄4 11⁄4
HANDLE TURN 90°

1
4 WAY DRILLINGS CBR4TSLB2XXX ⁄8 2 21⁄4 21⁄2 33⁄8 37⁄8 5 57⁄8 9
⁄16 31⁄2 3
⁄4 11⁄4 11⁄2 11⁄2 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8 7
⁄8
1 1 1 3 7 7 9 1 3 1 1 1 1 3 3 1 7
CBR4TSLB2XXX ⁄4 2 2 ⁄4 2 ⁄2 3 ⁄8 3 ⁄8 5 5 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄4 1 ⁄2 1 ⁄2 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x ⁄8 ⁄8
3 1 3 1 9 1 3 1 1 1 1 1
CAL4TSLA2012 ⁄8 2 2 ⁄2 N/A 3 ⁄8 5 ⁄4 N/A N/A ⁄16 3 ⁄2 ⁄4 1 ⁄4 1 ⁄2 N/A ⁄4–20TH’D 2 1 O.D. x ⁄4 1 ⁄4
1
C4316S2XXX ⁄2 2 21⁄2 N/A 33⁄8 51⁄4 N/A N/A 9
⁄16 31⁄2 3
⁄4 11⁄4 11⁄2 N/A 1
⁄4–20TH’D 2 1 O.D. x 1⁄4 11⁄4
HANDLE TURN 90°

1
5 WAY DRILLINGS CBR5TSLB2XXX ⁄8 2 21⁄4 21⁄2 33⁄8 37⁄8 5 57⁄8 9
⁄16 31⁄2 3
⁄4 11⁄4 11⁄2 11⁄2 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8 7
⁄8
1 1 1 3 7 7 9 1 3 1 1 1 1 3 3 1 7
CBR5TSLB2XXX ⁄4 2 2 ⁄4 2 ⁄2 3 ⁄8 3 ⁄8 5 5 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄4 1 ⁄2 1 ⁄2 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x ⁄8 ⁄8
3
CAL5TSLA2XXX ⁄8 2 21⁄2 N/A 33⁄8 51⁄4 N/A N/A 9
⁄16 31⁄2 3
⁄4 11⁄4 11⁄2 N/A 1
⁄4–20TH’D 2 1 O.D. x 1⁄4 11⁄4
1
C5316S2015 ⁄2 2 21⁄2 N/A 33⁄8 51⁄4 N/A N/A 9
⁄16 31⁄2 3
⁄4 11⁄4 11⁄2 N/A 1
⁄4–20TH’D 2 1 O.D. x 1⁄4 11⁄4
HANDLE TURN 360°

XXX = Pipe size or 1⁄8" = 007, 1⁄4" = 010, 3⁄8" = 012 and 1⁄2" = 015.
* A2, A3, B2, etc. indicates dimensions for 2-stack, 3-stack, etc.
Series CBR2TSL, CBR3TSL, CBR4TSL, CBR5TSL — Brass body, Teflon® sleeve, stainless steel rotor.
Series CAL2TSL, CAL3TSL, CAL4TSL, CAL5TSL — Aluminum body, Teflon® sleeve, stainless steel rotor.
Series C2316, C3316, C4316, C5316 — Type 316 stainless steel body, Teflon® sleeve, stainless steel rotor.
NOTE: 2-way valves are normally furnished ELL-drilled; optional straight-through or slotted porting available at no extra charge when requested. Valves having 90° rotation are equipped
with mechanical stops. Detent positioning at extra cost on valves with greater than 90° rotation (i.e., 5-Way Valve). Extra charge for special porting.
* Part numbers are for uniform portings at all levels. Special porting combinations for different levels available at extra charge when specified clearly by level. 7
 BAR STOCK BODIES
With Teflon® Rotor

Locknut Panel Mount Standard Mount

D

▼
D

▼
▼ ▼

E E
▼ ▼
▼ ▼
I

▼
▼
G C

▼
C

▼
G

▼
▼
▼ ▼ ▼
▼ ▼
▼ H H

▼
I F F
▼ ▼
B ▼
B ▼

▼
▼
A

▼
A

▼
▼

21⁄4"

▼
▼
#250 Lever Handle
(Optional on 1⁄8"
Conant Controls’ Precision Selector Valves are primarily designed for standard and 1⁄4" sizes)
duty. The Teflon ® rotor eliminates the need for lubrication and contributes to long
valve life. These valves are particularly well-suited for instrument air and other simi- MATERIALS Brass & Aluminum

lar applications. PRESSURE RANGE 0-250 PSI

Front View Pipe Dimensions (Inches)

Panel Mount Part No. Description Thread A B C D E F G H I
1
CBR2T007 Brass Bar Stock Std. ⁄8 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
2 WAY DRILLINGS 1
CBR2T010 Brass Bar Stock Std. ⁄4 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 7 7 9 7 9
CBR2LT007 Bar Stock Brass Locknut ⁄8 1 ⁄8 1 ⁄8 ⁄16 3 ⁄16 1 ⁄8 O.D. ⁄16 1 HEX x 3⁄16
1
CBR2LT010 Bar Stock Brass Locknut ⁄4 17⁄8 17⁄8 7
⁄16 3 9
⁄16 1 7
⁄8 O.D. 9
⁄16 1 HEX x 3⁄16
1
HANDLE TURN 90° CAL2T007 Bar Stock Aluminum ⁄8 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1
CAL2T010 Bar Stock Aluminum ⁄4 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 7 7 3 1 3 3
CBR3T007 Brass Bar Stock Std. ⁄8 1 ⁄8 1 ⁄8 ⁄16 3 ⁄4 1 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x 1⁄8
3 WAY DRILLINGS 1
CBR3T010 Brass Bar Stock Std. ⁄4 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1
CBR3LT007 Bar Stock Brass Locknut ⁄8 17⁄8 17⁄8 7
⁄16 3 9
⁄16 1 7
⁄8 O.D. 9
⁄16 1 HEX x 3⁄16
1
CBR3LT010 Bar Stock Brass Locknut ⁄4 17⁄8 17⁄8 7
⁄16 3 9
⁄16 1 7
⁄8 O.D. 9
⁄16 1 HEX x 3⁄16
1 7 7 7 3 1 3 3
HANDLE TURN 90° CAL3T007 Bar Stock Aluminum ⁄8 1 ⁄8 1 ⁄8 ⁄16 3 ⁄4 1 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x 1⁄8
1
CAL3T010 Bar Stock Aluminum ⁄4 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1
CBR4T007 Brass Bar Stock Std. ⁄8 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
4 WAY DRILLINGS 1
CBR4T010 Brass Bar Stock Std. ⁄4 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 7 7 9 7 9
CBR4LT007 Bar Stock Brass Locknut ⁄8 1 ⁄8 1 ⁄8 ⁄16 3 ⁄16 1 ⁄8 O.D. ⁄16 1 HEX x 3⁄16
1
CBR4LT010 Bar Stock Brass Locknut ⁄4 17⁄8 17⁄8 7
⁄16 3 9
⁄16 1 7
⁄8 O.D. 9
⁄16 1 HEX x 3⁄16
1
HANDLE TURN 90° CAL4T007 Bar Stock Aluminum ⁄8 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1
CAL4T010 Bar Stock Aluminum ⁄4 17⁄8 17⁄8 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 7 7 3 1 3 3
CBR5T007 Brass Bar Stock Std. ⁄8 1 ⁄8 2 ⁄16 ⁄16 3 ⁄4 1 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x 1⁄8
5 WAY DRILLINGS 1
CBR5T010 Brass Bar Stock Std. ⁄4 17⁄8 27⁄16 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1
CBR5LT007 Bar Stock Brass Locknut ⁄8 17⁄8 27⁄16 7
⁄16 3 9
⁄16 1 7
⁄8 O.D. 9
⁄16 1 HEX x 3⁄16
1
CBR5LT010 Bar Stock Brass Locknut ⁄4 17⁄8 27⁄16 7
⁄16 3 9
⁄16 1 7
⁄8 O.D. 9
⁄16 1 HEX x 3⁄16
1 7 7 7 3 1 3 3
HANDLE TURN 360° CAL5T007 Bar Stock Aluminum ⁄8 1 ⁄8 2 ⁄16 ⁄16 3 ⁄4 1 ⁄4–20TH’D 1 ⁄8 ⁄4 O.D. x 1⁄8
1
CAL5T010 Bar Stock Aluminum ⁄4 17⁄8 27⁄16 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
Series CAL2T, CBR2T, CAL3T, CBR3T – Bar Stock aluminum and brass bodies, Teflon rotor, precision fit.
®

Series CBR2LT, CBR3LT, CBR4LT, CBR5LT – Bar Stock brass body (locknut), Teflon® rotor, precision fit.
NOTE: 2-way valves are normally furnished ELL-drilled; optional straight-through or slotted porting available at no extra charge when requested.

8
NAME PLATES

2 Position 3 Position
90° Turn 180° Turn

4 Position
360° Turn

The standard aluminum name plates —3" dia.— are available in the titles listed below. They are black with reverse printing,
and are pre-drilled for mounting on 1⁄ 8" or 1⁄ 4" valves with a 1 3⁄ 8"
bolt circle. Order by title. Special titles available.
STANDARD TITLES
2-Position 90° 3-Position 180° 4-Position
ON-OFF OFF-AUTOMATIC-MANUAL PLAIN PLATES—1, 2, 3, 4
AUTOMATIC-MANUAL LOAD-OFF-LIFT 90° APART
LOAD-UNLOAD LIFT-OFF-LOAD
LOAD-LIFT UP-STOP-DOWN
LOAD-OFF
OPEN-CLOSED Note: Prices for special plates supplied upon request.
UP-DOWN

STANDARD & OPTIONAL HANDLES

31⁄2"
▼

11⁄2" 21⁄4"
▼

▼
#150 Standard Handle #300 Lever Handle #250 Lever Handle
Standard on 1⁄ 8" and 1⁄ 4" sizes. Standard on 3⁄ 8" and 1⁄ 2" sizes and Optional on 1⁄ 8" and 1⁄ 4" sizes.
all Stack Valves.

IDENTIFICATION TAGS LOCKING BRACKET

Stainless steel
identification tags
are provided at your
request at additional
cost. These tags are
helpful in identifying
specific chemicals,
gases, solvents, etc.
for which the valve
is being used.

Locking Bracket for use Locking Bracket for use

with #300 Lever Handle with #250 Lever Handle

9
 PNEUMATIC OPERATORS

Single Acting Model SA-50

A spring return fail-safe valve operator. The design incor-
porates a spring which provides virtually linear torque charac-
teristics throughout its travel. Unit is available in 90° rotation.
Provision for manual override is standard on all units. The
double piston, double rack and pinion design operates on 80 to
120 PSI.*
Dimensions: 3 3⁄ 8" X 5 7⁄ 8" X 3 3⁄ 8"
Connections: 1⁄ 4" N.P.T.

Double Acting Model DA-75

A compact air-to-air valve actuator made of corrosion
resistant materials. The double piston, double rack and pinion
design proves to be durable and consistent in its range of
torque output. This model operates on 60-120 PSI air supply. *
Dimensions: 3 3⁄ 8" X 5 7⁄ 8" X 3 3⁄ 8"
Connections: 1⁄ 4" N.P.T.

*Supply Pressure Torque Spring Return

(PSI) (Inch-pounds) Torque
Air-To-Spring Start End Start End
(Model SA) 80 99 55 144 90
120 208 165 144 90
Air-To-Air 60 147
(Model DA) 80 199
120 309

MODEL SA/DA FEATURES

• Double piston, double rack and

pinion design.
• Double O-rings seal actuator shaft
at top and bottom of actuator.
Specifications
- Constant torque output.
- Compact actuators.
• Concentric spring sets on the
spring return unit, single acting
•
•
Body Material: Glass-filled polyester
Shaft: 303 SS w/double O-ring seal
- Glass-filled polyester body and or failsafe. • Temp. Range: -25° F to 195° F
• O-rings: BUNA-N
end caps.
•- Extended shaft on actuator top.
• Output Torques: 90-309 in-lbs.
• Pistons, cylinder guides and racks
of one-piece molded Polyamide
Position indication.
- Manual override feasibility.
•
•
Supply Air: 60 PSI min, 120 PSI max*
Air Connections: 1⁄ 4" NPT
(Nylon 66) resin.
- Corrosion resistant.
• Recessed square female drive and
square (ISO) bolt circle on bottom
• Mounting Dimensions:
ISO and NAMUR
• Actuator shaft of cast stainless of actuator.
steel (Series 303).
- Corrosion resistant inside and outside.
• Top shaft, solenoid block and
accessory bolt circle conform to
- Massive teeth engagement between NAMUR standard.
racks and pinion. - Allows easy mounting of accessories.
- Minimal backlash and no play in parts.

*Consult Sales Office for recommended

air supply input pressure.

10
ELECTRIC OPERATORS

Lightweight and compact, these operators are specifically

designed for automating and remote control operation of
Conant 2 • 3 • 4 • 5 Way Precision Selector Valves — 1⁄ 8" through
1
⁄ 2" I.P.S. Conant Operators are fast acting — cycles through 90°
in 2 seconds depending on torque load. They are normally
furnished reversible for valves having a 90° rotation. They may
be ordered unidirectional — 360° cycles in 90° steps. Weather-
proof or explosion-proof as required.

All operators sold in combination with Conant Precision Selector Valves.

Assembled and tested as a unit.

Specifications
Operator Torque Output Cycle Time/90˚ Weight
Model No. (in/lb) (seconds) (lbs)

RF80 80 2.0 2.8

WP: Weatherproof construction available

EP: Explosion-proof construction available

Wiring Diagram

AC Reversible 300/600 Inch Lb.

11
 CORROSION-RESISTANT VALVES

CHEMSELECT ® PVC (Polyvinyl Chloride)

PVC is often specified for its versatile characteristics. It has been used for over
Chemselect ® Thermoplastic Valves
30 years in chemical processing, plating, chilled water distribution, deionized water,
are engineered to Conant Controls’
chemical drainage and many other applications. It has properties that lends itself to
exacting standards providing trouble
resisting chemical attack by acids, alkalies, salt solutions and a host of other chemi-
free service in demanding applications.
cals. It is attacked by certain solvents, most chlorinated hydrocarbons and aromatics.
The Chemselect ® valve can be
Maximum temperature is 140°F. 125 PSI rated at 75°F water non-shock.
ordered in various thermoplastics, with
a choice of Port configurations and sizes.
CVPC (Chlorinated Polyvinyl Chloride)
A Teflon ® rotor is standard on all
CVPC has similar chemical resistance properties to that of PVC. It has a maxi-
Chemselect ® valves giving the valve
mum temperature of 180°F. 125 PSI rated at 75°F water non-shock.
self-lubricating properties eliminating
the need for oils or grease!
PP (Polypropylene)
The Conant Chemselect ® can be
PP is a member of the Polyolefin family. PP is not physically as strong as PVC or
ordered in the following materials:
CVPC, however, it is chemically resistant to organic solvents as well as alkalies and
acids. It does not hold up against strong oxidizing acids, chlorinated hydrocarbons, and
aromatics. Ultraviolet radiation will degrade polyolefins over time. Maximum temperature
is 180°F. 125 PSI rated at 75°F water non-shock.

12
CHEMSELECT ®

PVDF (Polyvinylidene Fluoride) D

▼
▼
PVDF is tough, durable plastic with many unique properties. It has
a very good resistance to most acids, bases, and organic solvents. E

Ultraviolet radiation does not significantly degrade material, however,

▼
▼

▼
I

▼
the fluid in the system can be affect by U.V. Maximum temperature is
C
240°F. 125 PSI rated at 75°F water non-shock. ▼ ▼

Teflon®
F
Teflon ® has superior resistance to most chemicals and solvents. It
has self lubricating properties and is a great choice in many applications. B
▼
Maximum temperature is 400°F. 125 PSI rated at 75°F water non-shock.

▼
▼

▼
A

▼
▼

G TAP SIZE

Front View Part No. Pipe Dimensions (Inches)

Panel Mount (Ref PVC) Thread A B C D E F G H I
2 WAY DRILLINGS 1 7 3 1
CPVC2T007 ⁄8 2 2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 3 1
CPVC2T010 ⁄4 2 2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
3
CPVC2T012 ⁄8 21⁄2 27⁄8 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1 1 7 9 1 3 1 1
HANDLE TURN 90° CPVC2T015 ⁄2 2 ⁄2 2 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
3 WAY DRILLINGS CPVC3T007 1
⁄8 2 2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 3 1
CPVC3T010 ⁄4 2 2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
3
CPVC3T012 ⁄8 21⁄2 27⁄8 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1 1 7 9 1 3 1 1
HANDLE TURN 90° CPVC3T015 ⁄2 2 ⁄2 2 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
4 WAY DRILLINGS CPVC4T007 1
⁄8 2 2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1 7 3 1
CPVC4T010 ⁄4 2 2 ⁄16 3 ⁄4 1 ⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
3
CPVC4T012 ⁄8 21⁄2 27⁄8 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1 1 7 9 1 3 1 1
HANDLE TURN 90° CPVC4T015 ⁄2 2 ⁄2 2 ⁄8 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4
5 WAY DRILLINGS CPVC5T007 1
⁄8 2 21⁄2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
1
CPVC5T010 ⁄4 2 21⁄2 7
⁄16 3 3
⁄4 1 1
⁄4–20TH’D 13⁄8 3
⁄4 O.D. x 1⁄8
3
CPVC5T012 ⁄8 21⁄2 33⁄4 9
⁄16 31⁄2 3
⁄4 11⁄2 1
⁄4–20TH’D 2 1 O.D. x 1⁄4
1 1 3 9 1 3 1 1
HANDLE TURN 360° CPVC5T015 ⁄2 2 ⁄2 3 ⁄4 ⁄16 3 ⁄2 ⁄4 1 ⁄2 ⁄4–20TH’D 2 1 O.D. x 1⁄4

Series CPVC2T, CPVC3T, CPVC4T, CPVC5T — PVC body, precision tapered Teflon® rotor, Viton® O-ring seal.
Series CCVPC2T, CCVPC3T, CCVPC4T, CCVPC5T — CVPC body, precision tapered Teflon® rotor, Viton® O-ring seal.
Series CPP2T, CPP3T, CPP4T, CPP5T — Polypro body, precision tapered Teflon® rotor, Viton® O-ring seal.
Series CPVDF2T, CPVDF3T, CPVDF4T, CPVDF5T — PVDF body, precision tapered Teflon® rotor, Viton® O-ring seal.
Series CTEF2, CTEF3, CTEF4, CTEF5 — Teflon® body, precision tapered Teflon® rotor, Viton® O-ring seal.
NOTE: 2-Way valves are normally furnished ELL-drilled; optional straight-through or slotted porting available at no extra charge when requested. Valves having 90° rotation are
equipped with mechanical stops. Extra charge for special porting.
13
 CUSTOM PRODUCTS & APPLICATIONS

Selector Valves for Eliminating Dead Volume

For applications requiring no dead volume anywhere within the valve, which is
commonly the case in instrument sampling, Conant provides two specially designed
models of selector valves in sizes 1⁄8", 1⁄4", 3⁄8" and 1⁄2" and stack valves in sizes 1⁄8" and 1⁄4".
One model has welded-in tube stubs, which protrude from the body of the
valve, so that compression fittings may be connected easily to the stubs. The other
model has tube fittings welded into the body of the valve to simplify connecting metal
or plastic tubing.
Both models eliminate the dead volume space between the valve rotor and
the fitting.

Tube Fittings Model

Tube Stubs Model

CALL CONANT FOR YOUR CUSTOM APPLICATION NEEDS

14
Hastelloy® Selector Valves for
Corrosive Service
All Conant selector valves in 1⁄ 16", 1⁄ 8", 1⁄ 4", 3⁄ 8", and 1⁄ 2" NPTF sizes and stack valves
in 1⁄ 8" and 1⁄ 4" sizes can be fabricated in either Hastelloy ® C-276 or Hastelloy ® B-2.
Hastelloy ® C-276 resists a broad range of corrosive chemicals. It is particularly
well-suited for handling strong oxidizers, such as ferric and cupric chlorides, hot
contaminated mineral acids, formic and acetic acids, acetic anhydride, sea water and
brine solutions. Hastelloy ® C-276 is one of the few materials that can withstand the
corrosive effects of wet chlorine gas, sodium hypochlorite, and chlorine dioxide solutions.
Hastelloy ® B-2 is recommended for applications involving all concentrations of
hydrochloric acid at temperatures through their boiling points. This alloy also resists
a variety of other corrosive chemicals, like hydrogen chloride gas and sulfuric, acetic,
and phosphoric acids.

Selector Valves for

Sour Environments
Conant has developed a line of
valves for control panel and instrument
sampling applications which are certi- Extended
fied to meet the standards put forth by Shaft Options
the National Association of Corrosion
Engineers (NACE) for equipment used
in sour environments. The NACE
Standard, MR-01-75 (Revised), covers
metallic material requirements for
resistance to “sulfide stress cracking
for petroleum production, drilling,
gathering and flowline equipment, and
field processing facilities to be used in
H2S bearing hydrocarbon service.” The
bodies and rotors of all these special
selector valves, stack valves, and control
vent valves are constructed of metals
which resist sulfide stress cracking.
Rotor sleeves on all valves are made of
self-lubricating Teflon ®.
Conant valves for use in sour
Custom Port
environments are permanently marked
Configurations
to indicate their compliance with the
NACE Standard.

15