ASI4518R54v06

D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3 Integrated RCUs
- 2.0m

Antenna Specifications

Electrical Properties
2 x (690 - 894) (Lr1/Rr2)
Frequency range (MHz)
690 - 824 824 - 894
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
Gain (dBi) 15.0 15.7
Vertical side lobe suppression
> 16 > 16
above main beam (dB)
Horizontal 3dB beam width (°) 68 ±6 67 ±7
Vertical 3dB beam width (°) 10.5 ±0.7 9.5 ±0.8
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 25
Cross polar ratio (dB) 0° > 16
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

General Electrical Properties

Frequency range (MHz) 2300 - 2690 (y1)
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12, continuously adjustable
Electrical downtilt tolerance (°) ±1
General
Max. effective power per port (W) 40 (at 50℃ ambient temperature)*
parameters
Impedance (Ω) 50
Grounding DC Ground
Coupling factor between calibration port
-26 ±2
and each antenna port (dB)
Max. amplitude tolerance from calibration
0.7
port to input ports (dB)
Max. phase tolerance from calibration port to
Calibration 5
input ports (°)
and
electrical Ports VSWR 1.5
parameters Co-polarization isolation between ports (dB) ≥ 20 @ 2°- 6°Electrical downtilt ; ≥ 25 @ 7°- 12°Electrical downtilt
Cross-polarization isolation between ports (dB) ≥ 23 @ 2°- 6°Electrical downtilt ; ≥ 25 @ 7°- 12°Electrical downtilt

* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)

1
ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3 Integrated RCUs
- 2.0m

TDD LTE Electrical Properties

2300 - 2690 (y1)
Frequency range (MHz)
2300 - 2400 2496 - 2690
Gain (dBi) 15.5 16.0
Horizontal 3dB beam width (°) 85 70
Front to back ratio (dB) ≥ 25 ≥ 25
Single
column beam Cross polar ratio (0°) (dB) ≥ 26 ≥ 20
Vertical 3dB beam width (0°) 6.0 5.5
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
Gain (dBi) 17.3 17.6
Horizontal 3dB beam width (0°) 60 59

Radiation 65° Front to back ratio (dB) ≥ 28 ≥ 30

parameters Broadcast Cross polar ratio (0°) (dB) ≥ 16 ≥ 21
beam
Vertical 3dB beam width (0°) 6.0 5.5
Side lobe suppression for first side lobe above
≥ 15 ≥ 15
main beam (dB)
0°direct beam gain (dBi) 20.8 21
0°direction beam horizontal 3dB beam width (0°) 26 25
Service beam
0°direction beam front to back ratio (dB) ≥ 30 ≥ 30
0°direction beam cross polar ratio (0°) (dB) ≥ 20 ≥ 20
Gain (dBi) 20.3 19.9
Soft split Horizontal 3dB beam width (°) 29 28
multi-beam Front to back ratio (dB) ≥ 28 ≥ 28
Cross polar ratio at boresight (dB) ≥ 18 ≥ 18

Notes：
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

2
 ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3 Integrated RCUs
- 2.0m

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 499 x 206 68
Packing dimensions (H x W x D) (mm) 2360 x 550 x 245
Antenna weight (kg) 37.0

(530)
Clamps weight (kg) 6.3 (2 units)
Antenna packing weight (kg) 52 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65

2009
1420
Frontal: 730 (at 150 km/h)
Wind load (N) Lateral: 380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 13 x 4.3-10 Female

59
Connector position Bottom

Accessories
Unit: mm
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 12 ° 3.1 kg 1 (Separate packing)

RET S/N:
HWMxxx……Lr1
HWMxxx…….y1
HWMxxx…...Rr2
RAE S/N:
HWXxxx……y1

r - Red y - Yellow
L - Left array R - Right array

3
 ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3 Integrated RCUs
- 2.0m

Pattern sample for reference

690 - 894 MHz TDD Single column TDD 65° Broadcast TDD Service 0°

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
Power consumption (W) < 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
2 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
2.5 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna

4 Issue: 2021-01-22