GRAND RHAPSODY PIANO
USER GUIDE
CONTENTS
CHAPTER 1 INTRODUCTION ............................................................................................ 2
Acknowledgement .............................................................................................................................................. 2
1.1 Product Overview ........................................................................................................................................ 3
1.2 Concepts and Terminology ......................................................................................................................... 4
1.3 Components ................................................................................................................................................ 5
1.4 Functional Block/Flow Diagram ................................................................................................................... 5
CHAPTER 2 QUICK START GUIDE ................................................................................... 6
CHAPTER 3 INTERFACE AND CONTROLS ..................................................................... 7
3.1 Interface ...................................................................................................................................................... 7
Expanded View ...............................................................................................................................................................................7
Collapsed View ...............................................................................................................................................................................8
3.2 Controls ....................................................................................................................................................... 8
3.2.1 Keyboard Control .................................................................................................................................................. 8
Keys Section ...................................................................................................................................................................................9
Mix Section ....................................................................................................................................................................................11
EQ Section ....................................................................................................................................................................................13
Reverb Section ..............................................................................................................................................................................15
CHAPTER 4 Grand Rhapsody Piano Standalone Application .......................................... 17
Rhapsody Grand Piano / User Guide
1
CHAPTER 1 INTRODUCTION
Thank you for choosing Waves! In order to get the most out of your Waves instrument, please take some time to read
through this user guide. We also suggest that you become familiar with www.waves.com/support. There you will find an
extensive answer base, the latest tech specs, detailed installation guides, new software updates, and current information
on licensing and registration.
Sign up at the support site and you will receive personalized information about your registered products, reminders when
updates are available, and information on your authorization status.
Acknowledgement
The Grand Rhapsody Piano samples library was recorded and produced by Yoad Nevo at Metropolis Sound Studios in
London.
To contact Metropolis Studios, visit http://www.thisismetropolis.com/
To contact Yoad Nevo, visit: http://www.yoadnevo.com
Important Note
To play Grand Rhapsody, you must download at least one of these sample libraries in addition to
the plugin itself.
Rhapsody Grand Piano / User Guide
2
1.1 Product Overview
For more than three centuries, the piano has played a huge role in music. Once introduced, it quickly gained popularity
over contemporary keyboard instruments, primarily because it provided more volume and greater dynamic control. Over
time it has become a staple sound in almost all musical genres, including contemporary pop.
A piano’s sound is created when a key is pressed; this activates a hammer that strikes a string. The resulting vibration is
enhanced in tone and volume by the piano’s soundboard and acoustic enclosure. These, along with the position of the
piano’s cover and cover flap, influence how the piano vibrates, and therefore how its sound travels through a space (be it
a room, a concert hall, or a studio). The sound of a grand piano is purely mechanical and acoustic, with no artificial
reinforcement. In concert situations, microphones can be used to capture the instrument’s vibrations.
Waves Grand Rhapsody Piano is based on a library sampled from a famous Fazioli 228 grand piano in Studio A at
London’s Metropolis Studios. This library provides a full array of velocity and alternative samples for each key. Waves
also developed a method to recreate the ethereal sound produced by the sympathetic resonances introduced by idle
strings when the sustain pedal is pressed and the string dampers lift to release the string. The played strings are
accompanied by the light resonance of the undamped strings through acoustic excitation and the resonance correlated to
the sympathetic strings. This adds nuance and realism.
There are controls for velocity curve and formant. Beyond this, Waves has added studio-grade effects, including a
compressor, EQ, and a high-quality digital reverb.
Rhapsody Grand Piano / User Guide
3
1.2 Concepts and Terminology
The term “grand piano” refers to a piano whose strings are horizontal (i.e. parallel to the floor). Its essential parts
consist of:
• an action, which transfers energy from the keys to the hammers that strike the strings, and includes pedals
that dampen or sustain string vibrations
• a frame and soundboard
• a case that forms an acoustic chamber
• a bridge for the strings
• roughly 200 strings
Waves Grand Rhapsody Piano is powered by the Waves Sampler Engine (WSE), a state-of-the-art multi-sample
engine designed to deliver solid, high-quality performance.
Rhapsody Grand Piano / User Guide
4
1.3 Components
The Waves Grand Rhapsody Piano has one component: Grand Rhapsody Piano Stereo.
This is a virtual instrument plugin and will appear under the related selection menus for virtual instruments in all
supported DAW host applications.
Waves Grand Rhapsody Piano also has a standalone application. It uses ASIO (Windows) or Core Audio (Mac) drivers
to enable play through any audio device of choice. Grand Rhapsody Piano receives MIDI data to trigger notes and to
control changes.
1.4 Functional Block/Flow Diagram
Mic 1 Samples Delay 1
Formant
Mic 2 Samples Delay 2
Vel Curve
Sustain
Compressor Equalizer Reverb Volume Limiter
Resonance
Mic 3 Samples Delay 3
Key Up Samples
Pedal Noise
Samples
Rhapsody Grand Piano / User Guide
5
CHAPTER 2 QUICK START GUIDE
Insert the Grand Rhapsody Piano plugin on an instrument track in your DAW, or launch the standalone
application. The plugin will load its default set of microphones and will be ready to use. Experiment with
mics, reverb, EQ, and delay and you’ll soon understand how to use the controls to get the sound you want.
Navigating the Presets
Grand Rhapsody Piano presets are managed with the WaveSystem Toolbar at the top of the window.
Use the Next/Previous preset arrows on the Toolbar to scroll through presets. Click the Load button to see all presets.
Refer to the WaveSystem Toolbar User Guide for more information at http://www.waves.com/downloads/manuals.
Selecting the Samples Folder
When you first launch the standalone application or instantiate the plugin, you will likely see a prompt, “Please locate
your Waves Instrument’s Samples Library folder.” Navigate to the folder that holds your sample library and click OK. This
path will be saved with the plugin preferences.
Information about the samples folder is shown in the WaveSystem toolbar.
To select a different sample folder, click on the Samples Library bar and navigate to the desired folder. The folder must
contain valid Waves sampled instrument files with the wsf resource, otherwise the OK button will be grayed out. This
selection replaces the existing folder location preference.
Rhapsody Grand Piano / User Guide
6
CHAPTER 3 INTERFACE AND CONTROLS
3.1 Interface
The Grand Rhapsody Piano features expanded and collapsed views. Use the Collapse/Expand button in the top left
corner of the plugin to change between views.
Expanded View
The expanded view reveals the Grand Rhapsody’s complete interface, showing the microphones as well as the virtual
keyboard and pedals. These controls enable auditioning directly from the interface if you don’t have a MIDI controller.
Rhapsody Grand Piano / User Guide
7
Collapsed View
The collapsed view displays all of the Grand Rhapsody controls, but hides the top part that contains the piano, mics, and
pedals. This view provides complete control of the instrument. The Collapsed view uses much less screen space than
the Expanded view.
3.2 Controls
3.2.1 Keyboard Control
A virtual keyboard enables you to preview the sound of a note when a keyboard controller is not available. Use a mouse
or similar input device to play a note. This control cannot be automated, although it will follow any MIDI input device.
Rhapsody Grand Piano / User Guide
8
Keys Section
Vel Curve
This control changes the curve of the velocity response from logarithmic to exponential.
When the control is in 0 it is linear.
Range: -50 to +50
Initial Value: 0
Reset Value: 0
Continuous control
Formant
The formant control changes the sound character but not the pitch. Each step is equal to a half tone. This means that when
set to -12, the piano sound character will be lower by one octave, but the pitch will not change.
Range: -12 to +12
Initial Value: 0
Reset Value: 0
Discrete control, 25 steps
Rhapsody Grand Piano / User Guide
9
Pedals
Grand Rhapsody supports the two most common piano pedals.
Sustain Pedal
This is the essential sustain, “damper,” pedal, connected to controller 64, which is the standard. When pressed, the Sustain
resonance LED will light, indicating that sustain resonance is active. The sustain pedal is momentary—when using the pedal
and when clicking on the interface. However, using MIDI-learn will provide a “latched” behavior, where first the press sets
sustain on and it stays on until the next press.
Soft pedal
The soft pedal simulates offsetting the hammers so that they strike fewer strings. This results in a softer sound. Soft pedal is
connected to controller 67, which is standard. The soft pedal is momentary when using its original assignment of controller
67. However, clicking from the interface or changing MIDI assignment using MIDI learn results in a “latched” behavior, where
the first press sets soft pedal on, and it stays on until the next press.
The pedal icons can be used on the interface when you do not have a dedicated hardware sustain or soft pedal. The sustain
pedal Is momentary. The soft pedal is a toggle and will stay pressed until it’s clicked again.
Both show up and can be recorded via MIDI or via automation, but not at the same time.
Both pedals will trigger pedal noise samples. The level of this sound is controlled in the mix section by a single Pedal
volume control (see below).
Rhapsody Grand Piano / User Guide
10
Mix Section
Mic1 Select, Mic2 Select, Mic3 Select
The Microphone Select control allows you to choose a mic from a set of eight microphone pairs. A microphone can be
selected only once, so a microphone selected as Mic1 will not appear (or appear grayed out) in the Mic Select menus of Mic
2 and Mic 3.
The selection consists of the following mics:
Cond451 Player
Cond87 Close
Dyn57 Close
Cond4007 Close
Cond17 Medium
Ribb121 Medium
Ribb4038 Room
Cond84 Room
None: No microphone selected for this slot
Mic1 Default: Cond87_Close; Mic2 Default: None; Mic3 Default: None
Mic1 Level, Mic2 Level, Mic3 Level
The Mic Level controls set the level of the sampled sound of the piano, without pedal noise and release keys sounds. It
controls the level of the stereo samples in the overall mix, as recorded through the selected mic.
Range: 0–100%
Initial Value: Mic 1: 90%; Mic 2: 50%; Mic 3: 50%.
Reset Value: Mic 1: 100%, Mic 2: 75%, Mic 3: 75%
Continuous control
Rhapsody Grand Piano / User Guide
11
Mic1 Delay, Mic2 Delay, Mic3 Delay
The Mic Delay controls set the delay of the sampled sound of the piano. It enables controlling the phase between the
selected microphones, and it can be used can add a sense of depth and dimension.
Range: 0–100ms
Initial Value: Mic 1: 0 ms; Mic 2: 0 ms; Mic 3: 0 ms
Reset Value: 0
Continuous control
Mic1 Solo|Mute|Invert, Mic2 Solo|Mute|Invert, Mic3 Solo|Mute|Invert
Below each microphone mix fader there are three switches:
Solo places the microphone mix in solo mode. This is an exclusive button: Only one microphone mix can solo at a time.
The Mute button mutes the microphone’s mix.
Invert flips the phase of the microphone, along with its delay. This can be used to create “out of phase” effects and influence
tone colors.
Key Up
Key Up is the sound of the keys while releasing. It controls the Key Up samples level in the overall mix.
Range: 0–100%
Initial Value: 35.5%
Reset Value: 0
Continuous control
Pedal
Pedal is the sampled sound of the Grand Piano’s pedal. It controls the Pedal samples level in the overall mix.
Range: 0–100%
Initial Value: 24%
Reset Value: 0
Continuous control
Comp
The Comp knob mixes between the dry and the compressed signals.
Range: 0–100%
Initial Value: 6%
Reset Value: 0
Continuous control
Rhapsody Grand Piano / User Guide
12
Sustain Resonance Mix
Sustain Resonance controls the amount of sympathetic strings resonance. It is influenced by the sustain pedal.
Range: 0–100%
Initial Value: 26.7%
Reset Value: 0
Continuous control
EQ Section
Low Gain
The Low Gain control is a low-shelf filter. It can be decreased or increased +/-15dB.
Range: -15 to +15
Initial Value: 0
Reset Value: 0
Continuous control
Low Freq
The Low Freq control sets the frequency for the low frequency band. Frequencies below the selected value are boosted or
cut using the Bass Gain control.
Toggle switch, four values: 30, 60, 110, and 220
Default: -110
Reset Value: -35
Units: Hz
Discrete control
Mid Gain
The Mid control is a bell filter, which can be decreased or increased +/-15dB.
Range: -15 to +15
Initial Value: 0
Reset Value: 0
Continuous control
Rhapsody Grand Piano / User Guide
13
Mid Freq
The Mid Freq sets the frequency of the maximum peak or cut in the midrange. The surrounding bells behave accordingly.
Toggle switch, seven values: 0.36, 0.7, 1.6, 3.2, 4.8, 7.2 and 10
Discrete control: Default: 1.6
Reset: 110
Units: kHz
Hi Gain
The Treble control is a high shelf filter at 12KHz, and can be decreased or increased +/-15dB.
Range: -15 to +15
Initial Value: 0
Reset Value: 0
Continuous control
Volume
Controls the output gain level after plugin processing.
Range: 0–10
Initial Value: 8
Reset Value: 7.5
Continuous control
Limit
Limits the instrument’s output with respect to full scale full. When Limit is active, the clip LED pulses to reflect limiter gain
adjustment activity. The limiter is especially useful when using the standalone application.
Range: On: Off
Initial Value: Off
Reset Value: Off
Discrete On/Off control
Rhapsody Grand Piano / User Guide
14
Reverb Section
The Grand Rhapsody Reverb section uses the best Waves reverb algorithms. There are several reverb types to choose
from. These provide anything from simple reverbs to complex multi-effects.
Reverb On/Off
If you are using an external reverb, you may choose to turn off the Grand Rhapsody reverb. This will reduce CPU load
substantially.
Reverb Type
Grand Rhapsody Reverb section offers a selection of ten reverb types: Medium Stage, Empty Hall, Echo Reverb BPM, Multi
Effect BPM,
Recording Studio, Cathedral, Flange Reverb, Diffused Chorus, Concert Hall and Reverse Reverb.
Default: Medium Stage.
Reverb Mix
Controls the balance between the dry and wet signal. It also controls the amount of added reverb.
Range: 0% (dry) to 100% (wet)
Default: 30%
Reset Value: 0 (dry)
Continuous control
Reverb Predelay
Controls the amount of the delay between the dry and wet signals.
Range: 0ms–500 ms
Initial Value: 48 ms
Reset Value: 0 ms
Continuous control
Rhapsody Grand Piano / User Guide
15
Hi-Shelf Gain
Controls the reverb high shelf.
Range: +12 to -80
Default: 0
Reset Value: 0
Continuous control
ER/Tail Balance
Controls the balance between Early Reflections (that provide the room and distance sensation) and the Reverb Tail.
Range: 0–100
Default: 31.5
Reset Value: 50
Continuous control
Reverb Damp
Increases or decreases the duration of high frequencies during the decay.
Range: 0.1-2
Default: 0.68
Reset Value: 1
Continuous control
Reverb Time
Controls the reverb time.
Range: 0.12 sec–6 sec
Default: 2 sec
Reset Value: 5 sec
Continuous control
Rhapsody Grand Piano / User Guide
16
Meters
Meter Scale
Peak meter: -48 dB to 0 dB, shown as -30 - +18dB.
VU meter scale calibrated for 18 dB of headroom (0 dBVU = -18 dBFS).
Split Meters
Separate left and right meter indicators.
Black: Left
Green: Right
CHAPTER 4 Grand Rhapsody Piano Standalone Application
The Grand Rhapsody Piano application can be used as a standalone instrument. It requires ASIO drivers for Windows or
Core Audio for Mac OS X. Grand Rhapsody Piano .exe (Win) or Electric Grand 80 .app (MAC) loads the Grand
Rhapsody Piano instrument and configuration preferences dialogs.
The standalone application’s menu file contains three items:
• All Notes Off Sends an All-Notes-Off MIDI command to the Grand Rhapsody Piano synthesizer. Useful in
cases of “stuck” sustaining notes.
• Preferences Displays the preferences dialog for Audio, MIDI, and User Choices configurations.
• Exit Quits the application.
Rhapsody Grand Piano / User Guide
17
THE PREFERENCES DIALOG
The preferences dialog allows configuration of Audio, MIDI, and Tempo.
Audio provides control over the following parameters:
• Device displays the audio devices available on the system.
• Output Channels allows selection of audio outputs from the selected device.
• Sample Rate displays and sets the sample rate.*
• Buffer Size displays and sets the buffer size, which influences latency.*
*In Windows, sample rate and buffer size cannot be changed from this panel. To
modify these settings: close the application, adjust sample rate and buffer size with
your driver's control panel, and relaunch.
MIDI provides control over the following parameters:
• MIDI Input device displays a list of available MIDI input devices on the current
system.Select the MIDI device for receiving MIDI data.
• Input Channel: The Grand Rhapsody standalone is ready to receive MIDI in OMNI
modefrom all channels. The MIDI channel control allows the selected MIDI device to
receive MIDIinput only from certain channels, as selected in the check boxes.
Output Device: Not used
Tempo: Sets the tempo for all relevant plugins. By default, tempo-based Waves plugins are in a “tempo listen” state.
Their tempo rates will fix to this value.
Rhapsody Grand Piano / User Guide
18
