Bosch Rexroth AG

Spare parts list Service Hydraulics

Glockeraustrasse 4

Material number: R902204711 89275 Elchingen

Germany
Drawing: R902205107
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
A4VG045DA1DP001/40MRNC2S71UB2S4AE00-Y

Status of version: 09/2023 Date: 18.09.2023

Page: 1

Pos. Material number Designation Quantity

1 R902188082 ROTARY GROUP 1 UNIT L

2 R902121315 CONTROL 1 UNIT L
3 R902205110 PUMP HOUSING 1 UNIT L
4 R902205166 BELL HOUSING 1 UNIT L
5 R902156752 CONTROL MODULE 1 UNIT L
6 R902108669 BEARING FLANGE 1 UNIT L
7 R902041508 CONTROL CARTRIDGE 1 UNIT L
98 R902095811 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902204711 89275 Elchingen

Germany
Drawing: R902205107
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
A4VG045DA1DP001/40MRNC2S71UB2S4AE00-Y

Status of version: 09/2023 Date: 18.09.2023

Page: 2

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188082 89275 Elchingen

Germany
Drawing: R902124903
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 09/2023 Date: 18.09.2023

Page: 3

Pos. Material number Designation Quantity

1 R902136900 DRIVE SHAFT 1 UNIT L

2 R902124729 CRADLE 1 UNIT L
3 R902105614 ROTARY GROUP 1 UNIT L
4 R902121432 SEAL KIT 1 UNIT
5 R902188024 CONTROL PLATE, RIGHT-HAND ROTATION 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902188082 89275 Elchingen

Germany
Drawing: R902124903
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 09/2023 Date: 18.09.2023

Page: 4

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902136900 89275 Elchingen

Germany
Drawing: R902121435
+49 (0)7308/82-2126
Designation: DRIVE SHAFT

Status of version: 09/2023 Date: 18.09.2023

Page: 5

Pos. Material number Designation Quantity

1 R902118899 DRIVE SHAFT 1 UNIT

10 R902603905 CYL. ROLLER BEARING 1 UNIT
11 R909083360 RETAINING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902136900 89275 Elchingen

Germany
Drawing: R902121435
+49 (0)7308/82-2126
Designation: DRIVE SHAFT

Status of version: 09/2023 Date: 18.09.2023

Page: 6

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902124729 89275 Elchingen

Germany
Drawing: R902124727
+49 (0)7308/82-2126
Designation: CRADLE

Status of version: 09/2023 Date: 18.09.2023

Page: 7

Pos. Material number Designation Quantity

1 R902291281 CRADLE 1 UNIT

2 R902121036 SLIDER 1 UNIT
3 R902279770 BEARING SHELL PAIR 1 UNIT
4 R902603573 CAGE PAIR 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902124729 89275 Elchingen

Germany
Drawing: R902124727
+49 (0)7308/82-2126
Designation: CRADLE

Status of version: 09/2023 Date: 18.09.2023

Page: 8

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902124729 89275 Elchingen

Germany
Drawing: R902124727
+49 (0)7308/82-2126
Designation: CRADLE

Status of version: 09/2023 Date: 18.09.2023

Page: 9

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902105614 89275 Elchingen

Germany
Drawing: R902105615
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 09/2023 Date: 18.09.2023

Page: 10

Pos. Material number Designation Quantity

1 R902105598 CYLINDER 1 UNIT

2 R902118908 PISTON PAD 9 UNIT
11 R902127868 CUP-SPRING STACK 1 UNIT
20 R902094206 SHIM RING 1 UNIT
20 R902094207 SHIM RING 1 UNIT
20 R902094208 SHIM RING 1 UNIT
20 R902094209 SHIM RING 1 UNIT
24 R902205416 RETAINING PLATE 1 UNIT
25 R902252492 RETAINING BALL 1 UNIT
27 R902118731 WASHER 2 UNIT
29 R902118732 COMPRESSION SPRING 1 UNIT
41 R909083400 RETAINING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902105614 89275 Elchingen

Germany
Drawing: R902105615
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 09/2023 Date: 18.09.2023

Page: 11

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902121315 89275 Elchingen

Germany
Drawing: R902132702
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 09/2023 Date: 18.09.2023

Page: 12

Pos. Material number Designation Quantity

1 R902118744 POSITIONING PISTON 1 UNIT L

2 R902121077 COVER 1 UNIT L
3 R902121075 COVER 1 UNIT L
6 R909156199 HEXAGON NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902121315 89275 Elchingen

Germany
Drawing: R902132702
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 09/2023 Date: 18.09.2023

Page: 13

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902118744 89275 Elchingen

Germany
Drawing: R902118745
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 09/2023 Date: 18.09.2023

Page: 14

Pos. Material number Designation Quantity

1 R902252417 POSITIONING PISTON 1 UNIT

2 R902108662 ROD 1 UNIT
5 R902103203 RING 2 UNIT
5 R902103205 RING 2 UNIT
5 R902103204 RING 2 UNIT
5 R902103202 RING 2 UNIT
5 R902103201 RING 2 UNIT
5 R902103200 RING 2 UNIT
5 R902103199 RING 2 UNIT
5 R902103198 RING 2 UNIT
5 R902103197 RING 2 UNIT
6 R902603205 LOCATING RING 2 UNIT
7 R902121233 SPRING DISK 4 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902118744 89275 Elchingen

Germany
Drawing: R902118745
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 09/2023 Date: 18.09.2023

Page: 15

Pos. Material number Designation Quantity

8 R902130176 SPACER BUSHING 2 UNIT

8 R902130177 SPACER BUSHING 2 UNIT
8 R902114172 SPACER BUSHING 2 UNIT
8 R902114173 SPACER BUSHING 2 UNIT
8 R902114174 SPACER BUSHING 2 UNIT
8 R902114175 SPACER BUSHING 2 UNIT
8 R902114176 SPACER BUSHING 2 UNIT
8 R902130174 SPACER BUSHING 2 UNIT
8 R902130175 SPACER BUSHING 2 UNIT
9 R902108721 COMPRESSION SPRING 2 UNIT
10 R902124884 COMPRESSION SPRING 2 UNIT
15 R902280439 RETAINING RING 2 UNIT
19 R909086332 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902118744 89275 Elchingen

Germany
Drawing: R902118745
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 09/2023 Date: 18.09.2023

Page: 16

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902121077 89275 Elchingen

Germany
Drawing: R902130192
+49 (0)7308/82-2126
Designation: COVER

Status of version: 09/2023 Date: 18.09.2023

Page: 17

Pos. Material number Designation Quantity

1 R902121013 COVER 1 UNIT

5 R909157744 SOCKET HEAD CAP SCREW 3 UNIT
6 R909083785 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902121077 89275 Elchingen

Germany
Drawing: R902130192
+49 (0)7308/82-2126
Designation: COVER

Status of version: 09/2023 Date: 18.09.2023

Page: 18

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902121075 89275 Elchingen

Germany
Drawing: R902130192
+49 (0)7308/82-2126
Designation: COVER

Status of version: 09/2023 Date: 18.09.2023

Page: 19

Pos. Material number Designation Quantity

1 R902121012 COVER 1 UNIT

5 R909157744 SOCKET HEAD CAP SCREW 3 UNIT
6 R909083785 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902205110 89275 Elchingen

Germany
Drawing: R902130492
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 09/2023 Date: 18.09.2023

Page: 20

Pos. Material number Designation Quantity

1 R902205108 PUMP HOUSING 1 UNIT L

2 R902272723 PRESSURE RELIEF VALVE 1 UNIT L
3 R902272723 PRESSURE RELIEF VALVE 1 UNIT L
4 R902106688 PRESSURE RELIEF VALVE 1 UNIT L
5 R902096368 PRESSURE CUT-OFF VALVE 1 UNIT L
6 R902115312 SHUTTLE VALVE 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902205110 89275 Elchingen

Germany
Drawing: R902130492
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 09/2023 Date: 18.09.2023

Page: 21

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902205108 89275 Elchingen

Germany
Drawing: RA89294230
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 09/2023 Date: 18.09.2023

Page: 22

Pos. Material number Designation Quantity

1 R902222527 PUMP HOUSING 1 UNIT

10 R902603585 ROD SEAL 2 UNIT D
11 R902603501 ROD GUIDANCE RING 2 UNIT
12 R902603130 SCREW PLUG 1 UNIT
13 R902603130 SCREW PLUG 1 UNIT
14 R902603130 SCREW PLUG 1 UNIT
15 R902603130 SCREW PLUG 1 UNIT
16 R902603130 SCREW PLUG 1 UNIT
17 R902603130 SCREW PLUG 1 UNIT
18 R902603130 SCREW PLUG 1 UNIT
21 R902602698 SCREW PLUG 1 UNIT
22 R902603131 SCREW PLUG 1 UNIT
23 R902602698 SCREW PLUG 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902205108 89275 Elchingen

Germany
Drawing: RA89294230
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 09/2023 Date: 18.09.2023

Page: 23

Pos. Material number Designation Quantity

28 R902603224 SCREW PLUG 1 UNIT

29 R909831318 DOUBLE BREAK-OFF PLUG 3 UNIT
30 R909831319 DOUBLE BREAK-OFF PLUG 4 UNIT
34 R902192668 BUSHING 1 UNIT
35 R902114397 BUSHING 1 UNIT
38 R902603777 FILTER 1 UNIT
39 R902603777 FILTER 1 UNIT
40 R902603777 FILTER 1 UNIT
41 R909435871 NOZZLE 1 UNIT
42 R902603226 SCREW PLUG 1 UNIT
45 R902602699 SCREW PLUG 1 UNIT
46 R902124758 ECCENTRIC SCREW 1 UNIT
47 R909152975 SEALING NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902205108 89275 Elchingen

Germany
Drawing: RA89294230
+49 (0)7308/82-2126
Designation: PUMP HOUSING

Status of version: 09/2023 Date: 18.09.2023

Page: 24

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902272723 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 25

Pos. Material number Designation Quantity

1 R902281150 PRESSURE RELIEF VALVE 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281150 89275 Elchingen

Germany
Drawing: RA85900406
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 26

Pos. Material number Designation Quantity

1 R902133643 SCREW PLUG 1 UNIT

2 R902281089 VALVE PLATE 1 UNIT
3 R902272870 VALVE STEM 1 UNIT
4 R902133819 EXPANSION PIECE 1 UNIT
5 R902139014 COMPRESSION SPRING 1 UNIT
6 R902115321 COMPRESSION SPRING 1 UNIT
7 R902133946 SETSCREW 1 UNIT
9 R909830867 O-RING 1 UNIT D
10 R909084939 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281150 89275 Elchingen

Germany
Drawing: RA85900406
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 27

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902106688 89275 Elchingen

Germany
Drawing: RA90626364
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 28

Pos. Material number Designation Quantity

1 R902281286 PRESSURE RELIEF VALVE 1 UNIT L

6 R909150369 SHIM RING 1 UNIT
6 R909150370 SHIM RING 1 UNIT
6 R909153402 SHIM RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902106688 89275 Elchingen

Germany
Drawing: RA90626364
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 29

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281286 89275 Elchingen

Germany
Drawing: RA90569256
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 30

Pos. Material number Designation Quantity

1 R902105492 SCREW PLUG 1 UNIT

2 R909435899 VALVE SPOOL 1 UNIT
3 R902010336 SPRING DISK 1 UNIT
4 R909440765 COMPRESSION SPRING 1 UNIT
5 R909830867 O-RING 1 UNIT D
7 R902601678 STEEL SEALING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281286 89275 Elchingen

Germany
Drawing: RA90569256
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 31

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902096368 89275 Elchingen

Germany
Drawing: R902094189
+49 (0)7308/82-2126
Designation: PRESSURE CUT-OFF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 32

Pos. Material number Designation Quantity

1 R902106756 SCREW PLUG 1 UNIT

2 R902090832 SLEEVE 1 UNIT
3 R902133932 CONTROL PISTON 1 UNIT
4 R902106757 SPRING DISK 2 UNIT
5 R902254609 COMPRESSION SPRING 1 UNIT
6 R909432167 ADJUSTING SCREW 1 UNIT
10 R909830863 O-RING 1 UNIT
11 R909152707 SEALING NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902096368 89275 Elchingen

Germany
Drawing: R902094189
+49 (0)7308/82-2126
Designation: PRESSURE CUT-OFF VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 33

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902115312 89275 Elchingen

Germany
Drawing: R902115311
+49 (0)7308/82-2126
Designation: SHUTTLE VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 34

Pos. Material number Designation Quantity

1 R902133862 SHUTTLE VALVE 1 UNIT L

2 R902228516 STOP 1 UNIT
3 R910294829 SOCKET HEAD CAP SCREW 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902115312 89275 Elchingen

Germany
Drawing: R902115311
+49 (0)7308/82-2126
Designation: SHUTTLE VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 35

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902133862 89275 Elchingen

Germany
Drawing: R902133863
+49 (0)7308/82-2126
Designation: SHUTTLE VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 36

Pos. Material number Designation Quantity

1 R902239025 SCREW PLUG 1 UNIT

2 R902105118 PISTON 1 UNIT
3 R902120762 SLEEVE 1 UNIT
4 R909083734 O-RING 1 UNIT
5 R909083749 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902133862 89275 Elchingen

Germany
Drawing: R902133863
+49 (0)7308/82-2126
Designation: SHUTTLE VALVE

Status of version: 09/2023 Date: 18.09.2023

Page: 37

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902205166 89275 Elchingen

Germany
Drawing: RA72863751
+49 (0)7308/82-2126
Designation: BELL HOUSING

Status of version: 09/2023 Date: 18.09.2023

Page: 38

Pos. Material number Designation Quantity

2 R902280406 THROUGH DRIVE COUPLING 1 UNIT

3 R902213115 FLANGE 1 UNIT
4 R909083057 SOCKET HEAD CAP SCREW 4 UNIT
6 R342508007 STRAIGHT PIN 2 UNIT
8 R909085947 O-RING 1 UNIT
9 R902601474 SNAP RING 1 UNIT
13 R913032365 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902205166 89275 Elchingen

Germany
Drawing: RA72863751
+49 (0)7308/82-2126
Designation: BELL HOUSING

Status of version: 09/2023 Date: 18.09.2023

Page: 39

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902156752 89275 Elchingen

Germany
Drawing: R902156755
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 09/2023 Date: 18.09.2023

Page: 40

Pos. Material number Designation Quantity

1 R902120609 BASIC UNIT 1 UNIT L

2 R902602690 SWITCHING SOLENOID 2 UNIT
3 R902603656 NOZZLE 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902156752 89275 Elchingen

Germany
Drawing: R902156755
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 09/2023 Date: 18.09.2023

Page: 41

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902120609 89275 Elchingen

Germany
Drawing: R902120610
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 09/2023 Date: 18.09.2023

Page: 42

Pos. Material number Designation Quantity

1 R902228714 HOUSING 1 UNIT

2 R902215721 CONTROL PISTON 1 UNIT
3 R902236432 SPRING DISK 2 UNIT
4 R909071362 COMPRESSION SPRING 2 UNIT
8 R902603686 SEALING PLUG 6 UNIT
11 R902603825 SEAL 1 UNIT D
43 R909083028 SOCKET HEAD CAP SCREW 4 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902120609 89275 Elchingen

Germany
Drawing: R902120610
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 09/2023 Date: 18.09.2023

Page: 43

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108669 89275 Elchingen

Germany
Drawing: R902121041
+49 (0)7308/82-2126
Designation: BEARING FLANGE

Status of version: 09/2023 Date: 18.09.2023

Page: 44

Pos. Material number Designation Quantity

1 R902124811 BEARING FLANGE 1 UNIT

10 R913058598 O-RING 1 UNIT D
11 R909086769 SOCKET HEAD CAP SCREW 8 UNIT
12 R913009678 STRAIGHT PIN 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108669 89275 Elchingen

Germany
Drawing: R902121041
+49 (0)7308/82-2126
Designation: BEARING FLANGE

Status of version: 09/2023 Date: 18.09.2023

Page: 45

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902041508 89275 Elchingen

Germany
Drawing: R902182501
+49 (0)7308/82-2126
Designation: CONTROL CARTRIDGE

Status of version: 09/2023 Date: 18.09.2023

Page: 46

Pos. Material number Designation Quantity

1 R902000535 CONTROL CARTRIDGE 1 UNIT L

5 R909408028 ORIFICE 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902041508 89275 Elchingen

Germany
Drawing: R902182501
+49 (0)7308/82-2126
Designation: CONTROL CARTRIDGE

Status of version: 09/2023 Date: 18.09.2023

Page: 47

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902000535 89275 Elchingen

Germany
Drawing: R902115325
+49 (0)7308/82-2126
Designation: CONTROL CARTRIDGE

Status of version: 09/2023 Date: 18.09.2023

Page: 48

Pos. Material number Designation Quantity

1 R909414721 CONTROL SCREW 1 UNIT

2 R902037075 DIFFERENTIAL PISTON 1 UNIT
3 R909922152 CONTROLLER PIPE 1 UNIT
8 R909421327 WASHER 1 UNIT
10 R909414047 SPRING DISK 2 UNIT
12 R902228522 COMPRESSION SPRING 1 UNIT
14 R902037910 SETSCREW 1 UNIT
16 R909650154 RING 1 UNIT
26 R909156476 SNAP RING 1 UNIT
27 R909086731 O-RING 1 UNIT D
28 R909152707 SEALING NUT 1 UNIT D
33 R909156498 RETAINING RING 1 UNIT
34 R909153847 RETAINING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902000535 89275 Elchingen

Germany
Drawing: R902115325
+49 (0)7308/82-2126
Designation: CONTROL CARTRIDGE

Status of version: 09/2023 Date: 18.09.2023

Page: 49

Pos. Material number Designation Quantity

41 R909157287 HEXAGON NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902000535 89275 Elchingen

Germany
Drawing: R902115325
+49 (0)7308/82-2126
Designation: CONTROL CARTRIDGE

Status of version: 09/2023 Date: 18.09.2023

Page: 50

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner