OPERATION AND PARTS MANUAL

om
t.c
en
m
ip
qu
SERIES
MODEL MRH601DS
-E

VIBRATORY ROLLER
(Kubota EA330-E3-NB3-HGMS-1 DIESEL ENGINE)
nt
ou

Revision #0 (11/07/14)

To find the latest revision of this

sc

publication, visit our website at:

www.multiquip.com
Di

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

 PROPOSITION 65 WARNING

om
t.c
en
Diesel engine exhaust and some of

m
ip
qu
-E
nt
ou
sc
Di

PAGE 2 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 NOTES

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 3
 TABLE OF CONTENTS
MRH601DS Vibratory Roller Kubota EA330-E3-NB3-HGMS-1 Engine

om
Proposition 65 Warning............................................ 2 Cylinder Head Assembly.................................... 56-57
Parts Ordering Procedures....................................... 5 Crankcase Assembly......................................... 58-59
Safety Information............................................... 6-11 Piston And Main Bearing Case Assembly.......... 60-61
Specifications.................................................... 12-13 Gear Case Assembly......................................... 62-63
Dimensions............................................................. 14 Governor Assembly. .......................................... 64-65
General Information................................................ 15

t.c
Injection Pump Assembly................................... 66-67
Components...................................................... 16-17 Nozzle Holder Assembly.................................... 68-71
Inspection.......................................................... 18-20 Fuel Tank Assembly. ......................................... 72-73
Operation........................................................... 21-23 Air Cleaner Assembly......................................... 74-75
Maintenance...................................................... 24-29 Muffler Assembly................................................ 76-77

en
Troubleshooting................................................. 30-32 Radiator And Fan Assembly. ............................. 78-79
Wiring Diagram....................................................... 33 Flywheel And Starter Assembly. ....................... 80-81
Explanation Of Code In Remarks Column............. 34 Nameplate And Decals Assembly. .................... 82-83
Suggested Spare Parts.......................................... 35

m
Component Drawings Terms And Conditions Of Sale — Parts................. 84
Nameplates And Decals.................................... 36-37
Axle And Vibrator Assembly............................... 38-41
ip NOTICE
Body Assembly.................................................. 42-45
Hydraulic System Assembly. ............................. 46-47 Specifications and part numbers are subject to change
Electric Device Assembly................................... 48-51 without notice.
qu
Deadman System Control Assembly. .............. 52-55
-E
nt
ou
sc
Di

PAGE 4 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 PARTS ORDERING PROCEDURES
scwww.multiquip.com Ordering parts has never been easier!

om
Choose from three easy options: Effective:
January 1st, 2006
Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username
Order parts on-line using Multiquip’s SmartEquip website! and Password, E-mail us at: parts@multiquip.
 View Parts Diagrams com.

t.c
 Order Parts To obtain an MQ Account, contact your
 Print Specification Information District Sales Manager for more information.

Goto www.multiquip.com and click on Use the internet and qualify for a 5% Discount
Order Parts to log in and save! on Standard orders for all orders which include

en
complete part numbers.*
Note: Discounts Are Subject To Change

Order via Fax (Dealers Only): Fax your order in and qualify for a 2% Discount
All customers are welcome to order parts via Fax. on Standard orders for all orders which include

m
Domestic (US) Customers dial: complete part numbers.*
1-800-6-PARTS-7 (800-672-7877) Note: Discounts Are Subject To Change

ip Order via Phone: Domestic (US) Dealers Call:

1-800-427-1244
qu
Non-Dealer Customers:
Contact your local Multiquip Dealer for International Customers should contact
parts or call 800-427-1244 for help in their local Multiquip Representatives for
locating a dealer near you. Parts Ordering information.
-E

When ordering parts, please supply:

 Dealer Account Number  Specify Preferred Method of Shipment:
 Dealer Name and Address   UPS/Fed Ex  DHL
 Shipping Address (if different than billing address)   Priority One  Truck 
nt

   Ground
 Return Fax Number
 Next Day
 Applicable Model Number    Second/Third Day
 Quantity, Part Number and Description of Each Part
ou

NOTICE

All orders are treated as Standard Orders and will

ship the same day if received prior to 3PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 5
 SAFETY INFORMATION
DO NOT operate or service the equipment before reading The following table shows the potential hazards associated

om
the entire manual. Safety precautions should be followed with the operation of this equipment.
at all times when operating this equipment.
Failure to read and understand the safety
Symbol Safety Hazard
messages and operating instructions could
result in injury to yourself and others.
SAFETY MESSAGES Lethal exhaust gas hazards

t.c
The four safety messages shown below will inform you
about potential hazards that could injure you or others. The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words: Explosive fuel hazards

en
DANGER, WARNING, CAUTION or NOTICE.
SAFETY SYMBOLS
DANGER Burn hazards

m
Indicates a hazardous situation which, if not avoided,
WILL result in DEATH or SERIOUS INJURY.

WARNING
ip Respiratory hazards

Indicates a hazardous situation which, if not avoided,

COULD result in DEATH or SERIOUS INJURY.
qu
CAUTION Rotating parts hazards

Indicates a hazardous situation which, if not avoided,

COULD result in MINOR or MODERATE INJURY.
-E

Pressurized fluid hazards

NOTICE
Addresses practices not related to personal injury.
nt

Electric shock hazards

ou

Runover hazards
sc
Di

PAGE 6 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 SAFETY INFORMATION
GENERAL SAFETY NOTICE

om
CAUTION „ This equipment should only be operated by trained and
qualified personnel 18 years of age and older.
„ NEVER operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection, „ Whenever necessary, replace nameplate, operation and
hearing protection, steel-toed boots and other protective safety decals when they become difficult read.
devices required by the job or city and state regulations.
„ Manufacturer does not assume responsibility for any

t.c
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
„ NEVER use accessories or attachments that are not
„ NEVER operate this equipment when not recommended by Multiquip for this equipment. Damage

en
feeling well due to fatigue, illness or when to the equipment and/or injury to user may result.
under medication.
„ ALWAYS know the location of the nearest
„ NEVER operate this equipment under the influence of fire extinguisher.
drugs or alcohol.

m
„ ALWAYS know the location of the nearest
first aid kit.
„ ALWAYS know the location of the nearest phone or keep
a phone on the job site. Also, know the phone numbers

bolts before starting.

ip
„ ALWAYS check the equipment for loosened threads or of the nearest ambulance, doctor and fire department.
This information will be invaluable in the case of an
„ DO NOT use the equipment for any purpose other than emergency.
qu
its intended purposes or applications.
„ ALWAYS clear the work area of any debris, tools, etc.
that would constitute a hazard while the equipment is
in operation.
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 7
 SAFETY INFORMATION
ROLLER SAFETY „ DO NOT use worn-out hoses or couplings. Inspect daily.

om
DANGER „ ALWAYS store equipment properly when it is not being
used. Equipment should be stored in a clean, dry location
„ NEVER operate the equipment in an explosive out of the reach of children and unauthorized personnel.
atmosphere or near combustible materials. An
explosion or fire could result causing severe ENGINE SAFETY
bodily harm or even death.

t.c
DANGER
WARNING
„ The engine fuel exhaust gases contain poisonous carbon
„ NEVER disconnect any emergency or safety devices. monoxide. This gas is colorless and odorless, and can
These devices are intended for operator safety. cause death if inhaled.
Disconnection of these devices can cause severe injury,

en
bodily harm or even death. Disconnection of any of these „ The engine of this equipment requires an adequate
devices will void all warranties. free flow of cooling air. NEVER operate this equipment
in any enclosed or narrow
CAUTION area where free flow of the
air is restricted. If the air

m
„ NEVER lubricate components or attempt service on a
running machine. flow is restricted it will cause
injury to people and property
„ Never leave the roller unattended with the engine and serious damage to the DANGEROUS

running. Turn off engine.

ip
„ Use chock blocks when parking roller on a grade.
equipment or engine.
WARNING
GAS FUMES

„ Use extreme care when operating near obstructions, on „ DO NOT place hands or fingers inside engine
qu
slippery surfaces, grades, and slide slopes. compartment when engine is running.
„ When reversing, particularly on the edges and banks „ NEVER operate the engine with heat shields or
of ditches, as well as in front of obstaces, the operator guards removed.
must stay in a standing position at a safe distance from
„ Keep fingers, hands hair and clothing away
-E

the machine.
from all moving parts to prevent injury.
„ When operating near any house/building or pipelines,
always check the effect of machine vibration. Stop work „ DO NOT remove the engine oil drain plug
if necessary. while the engine is hot. Hot oil will gush out of the oil
nt

tank and severely scald any persons in the general area

„ DO NOT operate the roller with the covers open. of the roller.
„ ALWAYS keep the machine away from other personnel CAUTION
and obstacles. Always keep immediate are free of
ou

bystanders. „ NEVER touch the hot exhaust manifold,

muffler or cylinder. Allow these parts to cool
NOTICE before servicing equipment.
„ ALWAYS keep the machine in proper running condition. „ ALWAYS turn the engine off before performing
sc

maintenance.
„ Fix damage to machine and replace any broken parts
immediately.
Di

PAGE 8 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 SAFETY INFORMATION
NOTICE „ Store fuel in appropriate containers, in well-ventilated

om
areas and away from sparks and flames.
„ NEVER run engine without an air filter or with a dirty air
filter. Severe engine damage may occur. Service air filter „ NEVER use fuel as a cleaning agent.
frequently to prevent engine malfunction. „ DO NOT smoke around or near the
„ NEVER tamper with the factory settings equipment. Fire or explosion could result
of the engine or engine governor. Damage from fuel vapors or if fuel is spilled on a

t.c
to the engine or equipment can result hot engine.
if operating in speed ranges above the BATTERY SAFETY (ELECTRIC START ONLY)
maximum allowable.
„ NEVER tip the engine to extreme angles during lifting as DANGER

en
it may cause oil to gravitate into the cylinder head, making „ DO NOT drop the battery. There is a possibility that the
the engine start difficult. battery will explode.
FUEL SAFETY „ DO NOT expose the battery to open flames,
sparks, cigarettes, etc. The battery contains
DANGER

m
combustible gases and liquids. If these
„ DO NOT add fuel to equipment if it is placed inside truck gases and liquids come into contact with a
bed with plastic liner. Possibility exists of explosion or flame or spark, an explosion could occur.
fire due to static electricity. ip WARNING
FUEL
„ ALWAYS wear safety glasses when
handling the battery to avoid eye irritation.
qu
The battery contains acids that can cause
injury to the eyes and skin.
„ Use well-insulated gloves when picking up
the battery.
-E

FUEL

„ ALWAYS keep the battery charged. If the battery is not

charged, combustible gas will build up.
„ DO NOT charge battery if frozen. Battery can explode.
When frozen, warm the battery to at least 61°F (16°C).
nt

„ DO NOT start the engine near spilled fuel or combustible „ ALWAYS recharge the battery in a well-ventilated
fluids. Diesel fuel is extremely flammable and its vapors environment to avoid the risk of a dangerous concentration
can cause an explosion if ignited. of combustible gases.
ou

„ ALWAYS refuel in a well-ventilated area, away from „ If the battery liquid (dilute sulfuric acid)
sparks and open flames. comes into contact with clothing or skin,
„ ALWAYS use extreme caution when working with rinse skin or clothing immediately with
flammable liquids. plenty of water.
sc

„ DO NOT fill the fuel tank while the engine is running „ If the battery liquid (dilute sulfuric acid) comes into
or hot. contact with eyes, rinse eyes immediately with plenty
of water and contact the nearest doctor or hospital to
„ DO NOT overfill tank, since spilled fuel could ignite if it seek medical attention.
Di

comes into contact with hot engine parts or sparks from

the ignition system.

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 9
 SAFETY INFORMATION
CAUTION ENVIRONMENTAL SAFETY/DECOMMISSIONING

om
„ ALWAYS disconnect the NEGATIVE battery terminal NOTICE
before performing service on the equipment.
Decommissioning is a controlled process used to safely
„ ALWAYS keep battery cables in good working condition. retire a piece of equipment that is no longer serviceable.
Repair or replace all worn cables. If the equipment poses an unacceptable and unrepairable
safety risk due to wear or damage or is no longer cost
TRANSPORTING SAFETY

t.c
effective to maintain (beyond life-cycle reliability) and is to
CAUTION be decommissioned (demolition and dismantlement),be
sure to follow rules below:
„ NEVER allow any person or animal to stand underneath
the equipment while lifting. DO NOT pour waste or oil directly onto the ground, down

en
a drain or into any water source.
NOTICE
Contact your country's Department of Public
„ Before lifting, make sure that the equipment parts are not Works or recycling agency in your area and
damaged and screws are not loose or missing. arrange for proper disposal of any electrical
components, waste or oil associated with this

m
„ Use lifting equipment capable of lifting the weight of
the roller. equipment.

„ ALWAYS make sure crane or lifitng device has When the life cycle of this equipment is over, remove battery
ip
been properly secured to the lifting bail (hook) of the and bring to appropriate facility for lead reclamation. Use
equipment. safety precautions when handling batteries that contain
sulfuric acid.
„ ALWAYS shutdown engine before transporting.
qu
When the life cycle of this equipment is over, it is
„ NEVER lift the equipment while the engine is running. recommended that the trowel frame and all other metal
parts be sent to a recycling center.
„ Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling. Metal recycling involves the collection of metal from
discarded products and its transformation into raw materials
-E

„ Use adequate lifting cable (wire or rope) of sufficient

to use in manufacturing a new product.
strength.
Recyclers and manufacturers alike promote the process of
„ Use one point suspension hook and lift straight upwards
recycling metal. Using a metal recycling center promotes
with sufficient bearing capacity to prevent machine from
energy cost savings.
nt

tilting or slipping.
„ DO NOT lift machine to unnecessary heights.
„ ALWAYS make sure that roller is secured correctly when
ou

transporting on a trailer. Make sure all supports attaching

the roller to the trailer are tight.
sc
Di

PAGE 10 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 SAFETY INFORMATION
EMISSIONS INFORMATION

om
NOTICE
The diesel engine used in this equipment has been
designed to reduce harmful levels of carbon monoxide
(CO), hydrocarbons (HC) and nitrogen oxides (NOx)
contained in diesel exhaust emissions.

t.c
This engine has been certified to meet US EPA Evaporative
emissions requirements in the installed configuration.
Attempting to modify or make adjustments to the engine
emission system by unauthorized personnel without proper

en
training could damage the equipment or create an unsafe
condition.
Additionally, modifying the fuel system may adversely affect
evaporative emissions, resulting in fines or other penalties.

m
Emission Control Label
The emission control label is an integral part of the emission
system and is strictly controlled by regulations.
ip
The label must remain with the engine for its entire life.
If a replacement emission label is needed, please contact
qu
your authorized Kubota Engine Distributor.
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 11
 SPECIFICATIONS

om
Table 1. Specifications (Vibratory Roller)
89.14 x 47.05 x 27.24 in
Dimensions (L x H x W)
(2265 x 1195 x 692 mm)

t.c
Drum Diameter 13.98 in. (355 mm)
Drum Width 25.59 in. (650 mm)
Distance between Axes 20.47 in. (520 mm)

en
Weight 1214.75 lbs. (551 kg)
Vibration Frequency 3,300 vpm (55 Hz)
Centrifugal Force 2,428 lbf (10.8 kN)
Gradeablility 35 % (20°)

m
Working Speed 0 - 1.86 mph (0 - 3 kph)
Lubricating Oil 5.8 gallons (22 liters)
Water Tank Capacity ip 7.92 gallons (30 liters)
qu
-E
nt
ou
sc
Di

PAGE 12 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 SPECIFICATIONS

om
t.c
Table 2. Specifications (Engine)
Engine Model Kubota EA330-E3-NB3-HGMS-1
Engine Type Diesel
Maximum Output 6.2 HP (4.6 kW)

en
Fuel Tank Capacity 5.6 quarts (5.4 liters)
Starting System Electric
Max. Set Speed of Rotation 2,650

m
ip
qu
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 13
 DIMENSIONS

om
t.c
E

en
D

m
A
B
ip
F
qu
-E
nt

Figure 1. MRH601DS Dimensions

ou

Table 3. MRH601DS Dimensions

A 52.4 in. 1330 mm.
sc

B 89.2 in. 2265 mm.

C 47.0 in. 1195 mm.
D 67.1 in. 1705 mm.
E 27.2 in. 692 mm.
Di

F 25.6 in. 650 mm.

PAGE 14 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 GENERAL INFORMATION
The Mikasa Model MRH601DS is a powerful compacting

om
tool capable of applying tremendous force in consecutive
impacts to a soil surface. Its applications include soil
compacting for backfilling for gas pipelines, water pipelines
and cable installation work.
The impact force of the MRH601DS levels and uniformly
compacts voids between soil particles to increase dry

t.c
density.
Features include:
„„Hydraulic transmission to allow speed change without

en
gear shifting.
„„Deadman device which when pressed or hit will cause
the travel lever to return to neutral position bringing the
machine to a stop.

m
„„A horn to warn of machine’s approach.
„„An hourmeter/tachometer to measure runtime and rpm.
„„Non-corrosive water tank for the sprinkler system with
ip
a capacity of 7.9 gallons (30 liters).
„„Lifting hook to transport machine.
qu
„„Front bumper and working light.
„„Narrow profile with less than one inch wall clearance.
Narrower width allows access to tighter areas. No
exposed hydraulic hoses.
-E

„„Oil bath lubricated bearings and external vibration for

less servicing and more dependability.
„„Front and rear drum scrapers.
nt

„„Drum sprinkler system controls located near the operator.

„„Easy access to hydraulic components and hydraulic filter.
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 15
 COMPONENTS
5 6
1

om
4
3

t.c
11

en
10 9 8 7

m
14 15
12 13
ip 16
qu
19 17

18
-E

22 24

21 25
20 23
nt
ou

28
sc

27

29
31 30 26
Di

Figure 2. MRH601DS Components

PAGE 16 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 COMPONENTS
Figure 2 illustrates the location of the major components 15. Coolant Radiator Cap — Open to fill radiator with

om
for the MRH601DS Vibration Roller. The function of each coolant.
component is described below:
16. Breather Cap — Allow pressure to escape to the air
1. Traveling Lever — Push the lever forward, the in the form of a gas from heat.
roller will move in a forward direction, pull the lever
17. Hydraulic Oil Filler Port— Used to fill hydraulic oil
backwards, the roller will move in backwards direction.
tank.
Placing the lever in the middle (midway) will cause the

t.c
roller not to move (neutral). 18. Battery — Provides +12VDC to the electrical system.
Replace only with recommended type battery.
2. Handle Bar — When operating the roller, this handle
is to be in the downward position. When the roller is to 19. Dead-Man Device — When pressed or hit while
be stored, move the handle bar to the upright position. traveling in reverse, causes the travel lever to return

en
to neutral position to stop the machine.
3. Water Tank — Holds 7.9 gallons (30 liters) of water for
the sprinkler system. 20. Muffler — Used to reduce noise and emissions.
4. Water Tank Cap — Open to fill water tank. 21. Air Cleaner — Prevents dirt and other debris from
entering the fuel system.

m
5. Lifting Hook — Used to lift unit with crane or other
lifting device when transporting. 22. Engine Oil Filler Port — Used to fill engine oil.
6. Oil Tank — Fill with proper grade of hydraulic oil.
ip 23. Fuel Cock — Controls the flow of diesel fuel to the
engine. Must be in the ON position when starting and
7. Horn — Gives a warning sound of the machine
running the engine.
approaching, for jobsite safety.
24. Throttle Lever — Placed in operation position at start
8. Front Headlights — Activate using switch on control
qu
up.
handle. Used to illuminate ground during nighttime or
low-light operating conditions. 25. Stopper — Holds handlebar.
9. Scraper (In) — Prevents buildup of material between 26. Drain Outlet — Drains out the water from the water
the drums. tank.
-E

10. Scraper (Out) — Prevents buildup of material between 27. Headlight ON/OFF Switch — Turns the headlight on
the drum and the frame. and off.
11. Engine Starting Switch — ON position permits engine 28. Horn Button — Press this button to sound horn.
nt

starting, OFF position stops engine operation.

29. Hour/Tacho Meter — Measures the run time of the
12. Vibration ON/OFF Switch — Turns vibration on and unit. During operation it displays the rpm reading.
off.
30. Parking Brake — Makes sure machine will not
ou

13. Handlebar Stopper Pin — Locks handlebar in place. accidentally move when parked or not in use. Move
lever to the left to place parking brake in the locked
14. Fuel Tank/Cap — Fill with diesel fuel. Fuel tank holds
position.
approximately 2 gallons (7.5 liters). DO NOT top off
fuel. Wipe up any spilled fuel immediately. 31. Sprinkler Cock — Turns on the sprinklers (front and
sc

rear drums).
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 17
 INSPECTION
BEFORE STARTING ENGINE OIL CHECK

om
Before starting the roller: 1. To check the engine oil level, place the machine on
secure level ground with the engine stopped.
1. Read safety information at the beginning of manual.
2. Remove the filler dipstick from the engine oil filler hole
2. Understand the geographical features and regulations
(Figure 3) and wipe clean.
of the job site.
OIL FILLER

t.c
3. Check the items listed in Table 4:
HOLE
Table 4. Inspection Points
Item Check

en
Parking Brake Movement
Wheel Stopper Broken
Body (Frame) Cracks, Skewness
Broken, Cracks, Loose, Bolts
Lifting Hook

m
and Nuts falling off
Fuel Tank Leak, Quantity of Fuel, Dirt
Fuel System Leak
Fuel Filter Dirt
ip OIL LEVEL
MARKS
Engine Oil Leak, Quantity of Oil, Dirt
Coolant Leak, Quantity of Water Figure 3. Engine Oil Level
qu
Oil Tank Leak, Quantity of Oil, Dirt 3. Insert and then remove the dipstick again. Check that
Vibrator V-belt Cracks,Tension the oil level is between the two oil level marks on the
dipstick (Figure 3).
Engine Fan Belt Cracks, Tension
Oil Pressure Pipe-Line Leak, Looseness, Crack, 4. If the oil level is low, fill to the edge of the oil filler hole
-E

System Abrasion with the recommended oil type (Table 5). Maximum oil
capacity is 1.37 quarts (1.3 liters).
Water Pipe Line Leak, Looseness, Crack,
System Abrasion
Table 5. Oil Type
nt

Horn Operation (if working)

Season Temperature Oil Type
Headlight Operation (if working)
Summer 25°C or Higher SAE 10W-30
Broken, Cracks, Loose, Bolts
Traveling Lever Spring/Fall 25°C~10°C SAE 10W-30/20
ou

and Nuts falling off

Deadman Device Operation (if working) Winter 0°C or Lower SAE 10W-10
Scraper Curve, Damage, Adjustment
Bolt, Nuts Looseness, Falling off
sc
Di

PAGE 18 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 INSPECTION
CHECKING THE HYDRAULIC SYSTEM ELECTROMAGNETIC CLUTCH INSPECTION

om
1. Check the oil level gauge (Figure 4). Oil level should 1. The clutch friction surface gets worn out gradually over
be at the reference point or higher. Fill as required. the course of machine use, which results in increase
in the gap. When this gap exceeds more than 0.5 mm
OIL FILLER PORT OIL LEVEL GAUGE
(gap limit), the clutch operation failure occurs or the
REFERENCE POINT engagement function of the clutch fails. This indicates
(Red Round Shape)
that the electromagnetic clutch needs to be replaced.

t.c
Table 6. Electromagnetic Clutch Specifications
HYDRAULIC (For Vibration)
OIL TANK
Item Check
OIL SURFACE

en
Static friction torque 25 Nm (2.5 kg m)
Rated voltage DC12V
Figure 4. Hydraulic System Oil Level Gauge
Capacity 20W
2. Check the hydraulic pump and hydraulic motor for Coil resistance 6.6Ωf

m
damage.
Gap limit 0.5 mm
3. Check for loosening of hose and pipes, and check for
oil leaking part. ip 2. The temperature of the surface of the electromagnetic
4. Check to see if the hydraulic oil looks whitish and clutch might rise to about 194° to 212° (90° to 100°C)
cloudy. due to built-in coil. Make sure that the peripheral
temperature does not become higher than 176°F
CHECKING THE V-BELT
qu
(80°C).
DANGER
CAUTION
ALWAYS keep hands and fingers away
from pinch points. DO NOT allow anyone Before inspection of electromagnetic clutch, always
stop the engine to prevent possibility of your hand or
-E

to reach in on dangerous sections of the

machine to avoid any accidents. clothes getting caught in rotating parts. Be careful not
to burn your hand when checking the temperature.
1. Check the looseness of V-belt. When the tension is
low, the vibration become weak or V-belt tends to get FUEL CHECK
nt

damaged (Figure 5). DANGER

ELECTROMAGNETIC CLUTCH Motor fuel is highly flammable and can be

ou

dangerous if mishandled. DO NOT smoke

while refueling. DO NOT attempt to refuel
the pump if the engine is hot or running.
V-BELT
1. Remove the fuel cap located on top of the engine fuel
sc

tank.
2. Visually inspect to see if the fuel level is low. If fuel is
low, replenish with unleaded gasoline using a strainer
Figure 5. Checking V-Belt Tension for filtration. DO NOT top-off fuel. Wipe up any spilled
Di

fuel immediately!

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 19
 INSPECTION
CHECKING WATER TANK TRAVEL LEVER

om
1. Check the water tank to see if filled. Add water THROTTLE LEVER
if necessary. The water tank has a capacity of
approximately 10 gallons (40 liters). See Figure 6.
HORN BUTTON

WATER TANK CAP

t.c
LIGHT SWITCH
WATER TANK (ON-OFF)

Figure 8. Levers, Horn, and Light Check

4. With travel lever placed in reverse, push the deadman

en
device and verify that the travel lever returns to neutral
position. The travel lever stays in neutral position once
the deadman device is released (Figure 9).
Figure 6. Checking Water Tank
STOP(NEUTRAL)

m
TRAVEL
CAUTION LEVER
Be careful not to confuse the water tank with the oil tank. DEADMAN
ip DEVICE
CHECKING SPRINKLER REVERSE FORWARD

1. Move the sprinkler cocks for both the rear and front
“PRESS”
drums to the open position and confirm that the water
qu
flows normally.

SPRINKLER COCKS Figure 9. Deadman Device Check

CHECKING SCRAPERS
-E

1. Check scrapers and make sure that they are not

clogged with mud, bent or damaged (Figure 10).
OPEN OP E N
nt

CLOSE CLOSE
ou

Figure 7. Sprinkler Check

CHECKING LEVERS AND HORN SCRAPPER SCRAPPER

Figure 10. Checking Scrapers
1. Check travel and throttle levers to make sure they are
sc

functioning properly (Figure 8). 2. Adjust clearance between drums and scrapers as
necessary.
2. Turn on the light switch and confirm that the headlight
comes on (Figure 8). CHECKING BOLTS, NUTS AND SCREWS
Di

3. Press the horn and verify that it sounds normally 1. Check bolts, nuts, and screws on various parts of the
(Figure 8). machine, including the engine, for proper tightness.

PAGE 20 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 OPERATION
CAUTION 5. Open the fuel cock.

om
DO NOT attempt to operate the roller 6. Insert the key into the key switch and turn it to the
until the Safety Information, General operation position (Figure 13). The buzzer should
Information, and Inspection sections of this sound at this time.
manual have been read and thoroughly GLOW LAMP
understood.

t.c
STARTING
CAUTION
KEY SWITCH
When the engine is running, never turn the starter key

en
to the START position
STOP
(OFF) OPERATION
1. Move the throttle lever to the operation position (ON)
(Figure 11). KEY SWITCH
PREHEAT
(GL)

m
STOP START
(ST)
THROTTLE LEVER ip OPERATION
Figure 13. Starter Key (Operation Position)
qu
7. Turn the key to preheat position and wait until the glow
lamp lights (about 5 seconds). The glow lamp goes out
Figure 11. Throttle Lever (Operation Position) automatically after 5 seconds.
2. Move the travel lever to the stop (neutral) position
-E

8. After preheat is complete, turn the key to the start

(Figure 12). position. After the engine is started, take your hand
3. Move the vibration on/off switch to the off position off the key. Buzzer stops when the engine speed
(Figure 12). increases.
nt

4. Move the light switch to the off position (Figure 12). 9. Turn the starter key further to the right to the start
position (Figure 13) to start the engine. Buzzer stops
STOP(NEUTRAL) VIBRATION SWITCH sounding when the engine speed increases.
(ON-OFF)
TRAVEL
ou

LEVER NOTICE
OFF Machine will not start if the travel lever is not at the
stop position.
10. If the engine fails to start, do not continue to rotate the
sc

starter key for more than 5 seconds. Return the key

OFF
to the operation position and wait 20 to 30 seconds
before starting again.
LIGHT SWITCH
11. After starting the engine, continue to warm up the
Di

Figure 12. Travel Lever, Vibration Switch and engine for about 3 to 10 seconds especially in cold
LIght Switch weather.

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 21
 OPERATION
12. If the buzzer does not stop sounding after the engine CAUTION

om
has started, shutdown engine immediately and check
engine oil level. The buzzer also functions as engine After test travel, shut down engine and check for any
oil level warning. problems including oil leakage. If any trouble is found,
correct the problem before attempting to operate the
TRAVELING roller again.
1. Before starting to travel, make sure to release parking

t.c
brake (Figure 14). VIBRATING

PARKING BRAKE
1. Shift the vibration switch from off to on position. The
roller will start vibrating (Figure 16).

en
LOCK
ON
RELEASE

m
REAR WHEEL DRUM VIBRATION SWITCH
(ON-OFF)
Figure 14. Parking Brake ip
2. Push the travel lever forward slightly. This will cause Figure 16. Vibration Switch
the roller to travel forward at slow speed.
2. If vibration does not occur (electromagnetic clutch does
qu
STOP(NEUTRAL) not operate) while other functions are working properly,
the fuse might be blown. Check the fuse (10A) in the
TRAVEL LEVER
handle box (Figure 17) and if it is blown, replace with
a new one.
-E

REVERSE FORWARD

HANDLE BOX
nt

Figure 15. Travel Lever

3. To increase the travel speed, push the travel lever
ou

further.
Figure 17. Location of Fuse (Handle Box)
4. Push the travel lever backward to go in the reverse
direction. CAUTION
sc

CAUTION Vibration should not be used over completely

Do not reduce speed during work. When shifting travel compacted area, paved road surface, or with stationary
lever from forward to reverse, be sure to stop the lever at roller.
the neutral position first before moving the lever to the
Di

opposite direction. Do not shift the lever from forward to

reverse (or reverse to forward) in one motion.

PAGE 22 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 OPERATION
SPRINKLING STOPPING

om
3. Open the water cocks for the front and rear drums, to 1. With vibration switch in the off position, return the travel
start sprinkling. (Figure 18). lever to the stop (neutral) position. Move the throttle
lever to the stop position after making sure vibration
SPRINKLER COCK SPRINKLER COCK has stopped.
Front Drum Rear Drum
2. Return the key switch to the stop position as soon as

t.c
the engine stops.
CAUTION
OPEN OPEN
Neglecting to return the key switch to the stop position
will cause the battery to discharge.

en
CLOSE CLOSE 3. After the engine stops, close the fuel cock.

Figure 18. Water Cocks 4. Lock the parking brake (Figure 20).

m
DEADMAN DEVICE PARKING BRAKE

The deadman device prevents accidental traveling in

LOCK
reverse. It automatically returns the travel lever to the
ip RELEASE
neutral position by stopping the machine when the
deadman device is pressed forward (Figure 19).
STOP(NEUTRAL)
qu
REVERSE REAR WHEEL DRUM
DEADMAN
DEVICE Figure 20. Parking Brake (Lock)
TRAVEL
LEVER
-E

NOTICE

“PRESS” When leaving the machine, use the wheel stopper and
remove the key. Never park or stop on a slope.
nt

Figure 19. Deadman Device NOTICE

Parking brake system should always be kept clean to
ou

CAUTION avoid mud deposits.

Except for switching operation between forward,
reverse and neutral, keep your hands off the travel lever.
Deadman device might not work properly if your hand
is on the travel lever and you are caught between the
sc

machine and some other object.

Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 23
 MAINTENANCE
CAUTION NOTICE

om
Inspection and other services should always be carried These inspection intervals are for operation under
out on hard and level ground with the engine shut down. normal conditions. Adjust your inspection intervals
based on the number of hours the roller is in use, and
INSPECTION AND MAINTENANCE TABLE your particular working conditions.
To make sure your roller is always in good working

t.c
condition, perform the maintenance inspection procedures
before using.
Table 8. Inspection
ITEM CHECK FREQUENCY

en
Parking brake Movement Check Daily
Stopper With or Without Breakage Daily
Sprinkler Leaks, Looseness, Cracks, Abrasion Daily

m
Body Cracks,Skewness Daily
Fuel tank Leak, Quantity of Fuel, Dirt Daily
Hook Falling Off, Breakage,Cracks, Loose Bolts and Nuts
ip Daily
Fuel system Leak Daily
Fuel filter Dirt Daily
Engine oil Leak, Quantity of Oil, Dirt Daily
qu
Cooling water Leak, Quantity of Coolant Daily
Oil tank Leak, Quantity of Oil, Dirt Daily
V-Belt for Vibrator Cracks,Tension Daily
-E

Fan Belt (Engine) Cracks,Tension Daily

Oil Pressure Pipe Line System Leak, Looseness, Cracks, Abrasion Daily
Horn Operation Check Daily
Headlight Light Check Daily
nt

Travel Lever Falling Off, Breakage, Cracks, Loose Bolts and Nuts Daily
Deadman Device Operation Check Daily
ou

Scraper Curve, Signs of Damage, Adjust Daily

Other Bolts and Nuts Loose, Falling Off Daily
Fan Belt (Engine) Check, Adjust Every 10 hours
Engine Oil Change Oil After first 50 hours
sc

Engine Oil Filter Clean After first 50 hours

Air-Cleaner Element Clean After first 50 hours
Hydraulic Oil Filter Change After first 50 hours
Fan Belt (Engine) Change After first 50 hours
Di

Wiring Check After first 50 hours

PAGE 24 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 MAINTENANCE

Table 10. Inspection (continued)

om
ITEM CHECK FREQUENCY
Traveling Lever Corollary Part Grease Every 50 hours
Hydraulic Pump Lever Grease Every 50 hours
Deadman Device Grease Every 50 hours

t.c
Handle Stopper Grease Every 50 hours
Parking Brake Grease Every 50 hours
Engine Oil Change Every 100 hours
Battery Terminal Clean Every 100 hours

en
Air Cleaner Element Clean Every 100 hours
Fan Belt (Engine) Check Every 100 hours
Engine Oil Filter Cleaning Every 200 hours

m
Hydraulic Oil Filter Change Every 300 hours
Fuel Filter Change Every 450 hours
Fuel Tank Sediment Remove Every 450 hours
Inside of Radiator (Engine)
Fan Belt (Engine)
ip
Clean
Change
Every 450 hours
Every 500 hours
Valve Clearance (Engine) Adjust Every 800 hours
qu
Hydraulic Oil Change After 1000 hours
Injection Nozzle (Engine) Check, Clean After 1500 hours
Injection Pump (Engine) Check After 2000 hours
Air Cleaner Element Change After 1 year
-E

Fuel Return Pipe And Band Change After 2 years

Coolant Change After 2 years
Battery Change After 2 years
nt

Hydraulic Hose Change As Needed

Electromagnetic Clutch Change (Gap Limit - 0.5 mm) As Needed
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 25
 MAINTENANCE
DAILY SERVICE AIR CLEANER

om
1. Check for leakage of fuel or oil. 1. Remove air cleaner element from the air cleaner
(Figure 22).
2. Check for loose screws including tightness. See Table
7 below (tightening torque ), for retightening: AIR CLEANER
ELEMENT
Table 7. Tightening Torque (in. kg/cm) Diameter

t.c
Material 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm

4T 70 150 300 500 750 1,100 1,400 2,000

6-8T 100 250 500 800 1,300 2,000 2,700 3,800

11T 150 400 800 1,200 2,000 2,900 4,200 5,600 DUST CUP

en
300~ 650 ~
* 100
350 700 Figure 22. Engine Air Cleaner
2. If dust and dirt are on the element, blow them off by
sending compressed air from inside in vertical direction
3. Remove soil and clean the bottom of roller.

m
(Figure 23).
4. Check hydraulic pump, piping and hose for any leakage.
COMPRESSED
5. Check hydraulic hose connections with wrench applied
ip AIR
for tightness. A loosened hydraulic hose can be a cause
for leakage.
6. Check engine oil.
qu
ENGINE OIL REPLACEMENT
1. To drain engine oil, remove the oil strainer at the
bottom of the engine (Figure 21). Oil may be drained Figure 23. Cleaning Air Cleaner Element
more easily when it is warm after operation. (For more
-E

details, refer to Engine Owner's Manual). NOTICE

When cleaning the element with compressed air, the
air pressure should not exceed 0.69MPa (7.0kgf/cm2).
nt

3. If the element is dirty with carbon and oil, wash carefully

with mild detergent.
ou

FAN BELT ADJUSTMENT

1. Push the fan belt (middle of the fan drive pulley and
tension pulley) at 98N (about 10 kgf) to check the
OIL STRAINER deflection (Figure 24).
sc

Figure 21. Engine Oil Draining 2. If the level of deflection is not of the standard value,
2. Clean the strainer before putting it back. adjust it with tension bolt.

3. To replace engine oil, refer to the Inspection section. 3. Check the belt visually to see if there is any breakage,
crack or discoloration on the surface skin. If any defect
Di

is found, replace it with a new one. Also, replace if the

belt is worn and it touches the bottom of the pulley.

PAGE 26 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 MAINTENANCE
ADDING COOLANT

om
Push with a force 1. Remove the radiator cap to see if the coolant is filled
of 98N m (10kgf).
to the cap opening.
TENSION BOLT 2. If the coolant has decreased due to evaporation, add
distilled water.
3. In case of leakage, mix antifreeze liquid with the

t.c
Uneven
distilled water before adding.
FAN BELT
Wear Crack
4. If coolant needs to be replaced, place the drain cock
PULLEY
in the open position and drain the existing coolant to
a suitable container (Figure 26).

en
Normal Wear Failure

Figure 24. Fan Belt Adjustment

m
DRAIN COCK
4. T CAUTION
OPEN
CLUTCH NEVER attempt to check the fan belt
ip
with the engine running. Severe injury
PULLEY

can occur if your hand gets caught CLOSE

between the fan belt and the clutch.
qu
VIBRATOR
PULLEY
ALWAYS use safety gloves. Figure 26. Coolant Drain Cock
5. Replace with 1.27 quarts (1.2 liters) coolant.
FUEL FILTER
1. Close the fuel filter cock. NOTICE
-E

2. Remove the retainer ring above the cup to remove the For handling of antifreeze, refer to the operation manual
filter cup and the element (Figure 25). provided by the manufacturer.

ELEMENT
HYDRAULIC SYSTEM INSPECTION AND SERVICE
nt

RETAINER RING 1. Check motor and pump for any damage.

FILTER CUP
2. Check hoses and pipes for proper tightness and make
sure there are no leaks.
ou

3. Check oil tank for proper oil level. Make sure hydraulic
oil has not whitened or emulsified. Whitish color means
aeration in pump. Retighten pipe and correct level of
oil. Emulsification means water in the hydraulic oil. If
sc

Figure 25. Fuel Filter Replacement emulsification happens, replace the oil. See Inspection
section for oil replacement procedure.
3. Rinse inside the cup with light oil, and install a new
filter element.
Di

4. Tighten the retainer ring to prevent dust and dirt entry

and fuel leakage, then open the filter cock.

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 27
 MAINTENANCE
NEUTRAL POSITION ADJUSTMENT BATTERY MAINTENANCE

om
1. If neutral position for forward and reverse travel has NOTICE
been displaced, conduct the neutral adjustment.
Read and understand the battery safety information in
2. The travelling lever gets lightly locked at the neutral the front of this manual before performing maintenance
position. Adjust the turnbuckle part of the running cable on the battery.
at the hydraulic pump side to correct the position.

t.c
5. Check the battery terminals periodically to ensure that
HYDRAULIC they are in good condition.
PUMP
6. Looseness and corrosion of the terminal will lead to
contact trouble. If white powder is found on the terminal,

en
clean with lukewarm water then apply grease on it. If the
RUNNING CABLE corrosion is serious, replace the battery with a new one.

TURNBUCKLE PART
7. Check battery for cracks or any other damage. If
white pattern appears inside the battery or paste has
accumulated at the bottom, replace the battery.

m
8. If the machine will not be in operation for a long period
Figure 27. Adjustment of Neutral Position of time, charge the battery sufficiently, tighten all caps
ip correctly, store in cool dry place and check the battery
NOTICE charge level every month to maintain the performance
of the battery.
This machine has a micro-switch that allows the engine
BATTERY CABLE CONNECTION
qu
to start only at the stop (neutral) position to prevent
uncontrolled running when the engine is started.
1. When removing cable, disconnect the negative
terminal first (Figure 29) then the positive terminal.
3. Check and make sure that the roller at the end of the When connecting the battery, connect the positive
micro-switch is at the dent of the camshaft of the lever terminal first.
-E

(hydraulic pump). Adjust if necessary (Figure 28).

ROLLER
nt

HYDRAULIC
PUMP

MICRO-SWITCH
ou

BATTERY
CAMSHAFT

Figure 28. Micro-Switch Adjustment

Figure 29. Battery Connection
sc

4. After adjustment, lightly apply grease to the roller

bearing of the micro-switch.
Di

PAGE 28 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 MAINTENANCE
MACHINE MAINTENANCE LONG TERM STORAGE

om
1. At the end of each day’s operation, wash dust and 1. Conduct thorough lubrication and oil change.
dirt off the machine. Clean area around drums and
2. Disconnect battery terminals and dismount battery
scrapers making sure all mud is removed.
from machine. Store battery.
NOTICE 3. If there is a possibility that ambient temperature will
drop below freezing point, add antifreeze agent to

t.c
When using a high pressure water sprayer, be careful coolant.
not to let water enter the engine from the engine muffler
and air cleaner. 4. Cover the inlet and outlet of air cleaner and muffler
securely.
If water enters the engine cylinder, water hammer effect

en
might occur. See Water Hammer Effect Information 5. Store machine indoors. Do not leave outdoors.
section for explanation.
WATER HAMMER EFFECT INFORMATION
An air breather is equipped with the oil tank (Figure 30).
A cover is provided to prevent entry of water into the oil When water enters inside the diesel engine cylinder, and
because water cannot be compressed like air, shock and

m
tank. Be careful not to let the cover fall off when cleaning
with a high pressure water sprayer. high water pressure occur inside the cylinder. This causes
damage to the parts inside the engine. This phenomenon
ip is called water hammer effect.
AIR BREATHER
qu
OIL TANK

Figure 30. Air Breather Location

-E

2. Drain water tank completely. Wash and clean inside

the tank if it is dirty.
3. Cover the machine to prevent dust and store in a dry
nt

place away from sun exposure and high humidity.

ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 29
 TROUBLESHOOTING
Troubleshooting - Roller

om
SYMPTOM POSSIBLE PROBLEM SOLUTION
Unit does not travel. Parking brake still engaged? Release parking brake lever.
Defective centrifugal clutch? Repair or replace clutch.
Damaged rubber coupling and flange? Replace rubber coupling and flange.

t.c
Defective travel cable and link? Repair or replace travel cable and link.
Damaged scraper or too much mud in
Replace or repair scraper.
scraper?
Unit does not travel or Damaged or clogged oil filter? Replace filter.

en
travel is not smooth. Damaged or leaking hydraulic pipe? Repair or replace parts.
Low oil level or contaminated oil? Replenish or replace oil.
Damaged or leaking hydraulic pump? Repair or replace hydraulic pump.
Damaged or leaking hydraulic motor? Repair or replace hydraulic motor.

m
Damaged drum gear and bearing? Repair parts.
Bad drum rotation? Repair or replace drum.
Defective centrifugal clutch?
ip Repair or replace clutch.
Damaged or slipping V-belt? Replace V-belt or adjust tension.
Damaged vibration cable and linkage? Replace or repair vibration cable and linkage.
Unit does not vibrate
qu
or has weak vibration. Damaged vibration clutch? Adjust or replace clutch.
Defective clutch vibrator pulley V-belt? Replace V-belt.
Check and repair vibrator. Check if oil level is
Vibrator does not turn smoothly with hand?
not excessively high.
-E
nt
ou
sc
Di

PAGE 30 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 TROUBLESHOOTING
Troubleshooting (Engine)

om
Symptom Possible Problem Solution
No Fuel reaching injection pump? Add fuel. Check entire fuel system.
Defective fuel pump? Replace fuel pump.
Fuel filter clogged? Replace fuel filter and clean tank.
Faulty fuel supply line? Replace or repair fuel line.

t.c
Check piston, cylinder and valves. Adjust or
Compression too low?
repair per engine repair manual.
Engine will not start or start is delayed,
although engine can be turned over. Fuel pump not working correctly? Repair or replace fuel pump.
Oil pressure too low? Check engine oil pressure.

en
Comply with cold starting instructions and
Low starting temperature limit exceeded?
proper oil viscosity.
Defective battery? Charge or replace battery.
Check carefully for loosened fuel line
Air or water mixed in fuel system?
coupling, loose cap nut, etc.

m
Refill engine crankcase with correct type of
Engine oil too thick?
At low temperatures engine will not start. oil for winter environment.
Defective battery? Replace battery.

Engine fires but stops soon as starter is

switched off.
ip
Fuel filter blocked?
Fuel supply blocked?
Replace fuel filter.
Check the entire fuel system.
Defective fuel pump? Replace fuel pump.
qu
Fuel tank empty? Add fuel.
Fuel filter blocked? Replace fuel filter.
Engine stops by itself during normal
operation. Defective fuel pump? Replace fuel pump.
Mechanical oil pressure shutdown sensor Add oil. Replace low oil shutdown sensor if
stops the engine due to low oil? necessary.
-E

Fuel tank empty? Replace fuel filter.

Fuel filter clogged? Replace fuel filter.
Fuel tank venting is inadequate? Ensure that tank is adequately vented.
nt

Check threaded pipe unions tape and tighten

Leaks at pipe unions?
unions a required.
Low engine power, output and speed. Speed control lever does not remain in
See engine manual for corrective action.
selected position?
ou

Engine oil level too full? Correct engine oil level.

Use No. 2-D diesel fuel only. Check the fuel
Injection pump wear? injection pump element and delivery valve
assembly and replace as necessary.
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 31
 TROUBLESHOOTING
Troubleshooting (Engine) - continued

om
Symptom Possible Problem Solution
Air filter blocked? Clean or replace air filter.
Low engine power output and low speed,
Incorrect valve clearances? Adjust valves per engine specification.
black exhaust smoke.
Malfunction at injector? See engine manual.
Drain off engine oil down to uppermark on
Too much oil in engine crankcase?

t.c
dipstick.
Entire cooling air system contaminated/ Clean cooling air system and cooling fin
blocked? areas.
Fan belt broken or elongated? Change belt or adjust belt tension.
Engine overheats. Coolant insufficient? Replenish coolant.

en
Radiator net or radiator fin clogged with dust? Clean net or fin carefully.
Fan, radiator, or radiator cap defective? Replace defective part.
Thermostat defective? Check thermostat and replace if necessary.
Head gasket defective or water leakage? Replace parts.

m
ip
qu
-E
nt
ou
sc
Di

PAGE 32 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 WIRING DIAGRAM

om
Abbreviation of Colors

t.c
Black : BK Blue : B Orange : OR Yellow : Y DC12 Horn Assembly
White : W Red : R Sky Blue : SB Green : G Electromagnetic Clutch

Harness Lamp, Horn Clutch

YAZAKI(7116-2031) YAZAKI(7116-2031)
CA104

en
AVS1.25 BK
AVS1.25 R CB104 CA104
CB104
AVS2 R AVS2 G Headlight(12V-25W)

CB104 CA104 YAZAKI(7122-2128) AVS1.25 Y

AVS0.85 Y AV1.25 Y Regulator
CB104
RS2703 CW104 CA104 CA104 YE
AVS0.85 Y 5 4 3 2 1 YAZAKI(7123-2128)
CA104

m
CB104 CA104 5 4 3 2 1
CA104 ON-OFF Switch Toggle Switch
AVS1.25 BK CB104
(with Lead Wire)
AVS0.85 R AVS1.25 R/BK
NIPPON TANSHI AV1.25 Y Lead Wire IG-CW EBL, RE-5
Generator (6023-4105) Lead Wire
CB104 CA104
CA104 (Hour Meter[-] Earth)
Buzzer
EBL

SUMITOMO(6040-2111)
ip Lead Wire
(Hour Meter[+]
CW104

Sw)
AVS1.25 R
CA104

NICHIFU(TMEDN630809FA)
h
NICHIFU(TMEDN630809FA)
AVS1.25 BK

AVS1.25 OR CA104
Hour Meter senDEC 1/10
qu
CW104 AVS1.25 R
AVS1.25 SB Fuse10A
SUMITOMO AVS2 W AVS2 W
AC AC
(6030-2981) CA104 F
AVS3 BK/R AVS3 BK/R
LA04 19 19
AVS3 R AVS3 Y Starter Switch
Oil Pressure Switch 30 30
AVS2 BK/W AVS2 BK/W AVS2 BK/W
50 50
YAZAKI YAZAKI SUMITOMO Timer (Glow Lamp)
(7123-2446) (7123-2446) (6101-5041)
-E

Glow Plug SUMITOMO(6101-1041) /KUBOTA E-75

AVS1.25 R/W

Lead Wire(Micro-switch)
LA04
Glow Lamp
CA104 YAZAKI
Battery (7123-
42B19R AVS2 BK/W GN
CW104 CA104 CB104 CA104 2262)
AV-20 BK CB104 HKV0.5 G HKV0.5 Y AVS1.25 BK
TAV-20 BK
nt

CB104 AVS1.25
NC COM G
CA104 AVS1.25 R/W
Battery Cable CA104 AVS1.25 B
NO X
AVS1.25 BK
Battery Cable Starter
Micro-switch
Harness KUBOTA E/G SW Harness KUBOTA, B
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 33
 EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and QTY. Column

om
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there Numbers Used — Item quantity can be indicated by a
are any questions. number, a blank entry, or A/R.

NOTICE A/R (As Required) is generally used for hoses or other

parts that are sold in bulk and cut to length.
The contents and part numbers listed in the parts
A blank entry generally indicates that the item is not sold

t.c
section are subject to change without notice. Multiquip
does not guarantee the availability of the parts listed. separately. Other entries will be clarified in the “Remarks”
Column.
SAMPLE PARTS LIST REMARKS Column

en
NO. PART NO. PART NAME QTY. REMARKS
Some of the most common notes found in the “Remarks”
1 12345 BOLT .....................1 .....INCLUDES ITEMS W/%
2% WASHER, 1/4 IN. ..........NOT SOLD SEPARATELY Column are listed below. Other additional notes needed
2% 12347 WASHER, 3/8 IN. ..1 .....MQ-45T ONLY to describe the item can also be shown.
3 12348 HOSE ..................A/R ...MAKE LOCALLY
4 12349 BEARING ..............1 .....S/N 2345B AND ABOVE Assembly/Kit — All items on the parts list with the

m
same unique symbol will be included when this item is
NO. Column purchased.
Unique Symbols — All items with same unique symbol
ip Indicated by:
(@, #, +, %, or >) in the number column belong to the “INCLUDES ITEMS W/(unique symbol)”
same assembly or kit, which is indicated by a note in the
“Remarks” column. Serial Number Break — Used to list an effective serial
number range where a particular part is used.
qu
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same Indicated by:
general item, such as different size saw blade guards in “S/N XXXXX AND BELOW”
use or a part that has been updated on newer versions “S/N XXXX AND ABOVE”
of the same machine. “S/N XXXX TO S/N XXX”
-E

NOTICE Specific Model Number Use — Indicates that the part

is used only with the specific model number or model
When ordering a part that has more than one item number variant listed. It can also be used to show a
number listed, check the remarks column for help in part is NOT used on a specific model or model number
nt

determining the proper part to order. variant.

PART NO. Column Indicated by:
“XXXXX ONLY”
ou

Numbers Used — Part numbers can be indicated by a “NOT USED ON XXXX”

number, a blank entry, or TBD.
“Make/Obtain Locally” — Indicates that the part can
TBD (To Be Determined) is generally used to show a be purchased at any hardware shop or made out of
part that has not been assigned a formal part number available items. Examples include battery cables, shims,
sc

at the time of publication. and certain washers and nuts.

A blank entry generally indicates that the item is not sold “Not Sold Separately” — Indicates that an item cannot
separately or is not sold by Multiquip. Other entries will be purchased as a separate item and is either part of an
be clarified in the “Remarks” Column. assembly/kit that can be purchased, or is not available
Di

for sale through Multiquip.

PAGE 34 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 SUGGESTED SPARE PARTS
MIKASA MRH601DS VIBRATORY ROLLER KUBOTA EA330-E3-NB3-HGMS DIESEL ENGINE

om
1 TO 3 UNITS 1 TO 3 UNITS
Qty. P/N Description Qty. P/N Description
2............954001380.............ELEMENT, HYDRAULIC OIL 3............1497111180...........ELEMENT, AIR CLEANER
1............070100361.............V-BELT, A-36 (VIBRATOR) 3............1T02143560..........ELEMENT, FUEL FILTER
1............954408580.............STRAINER, WATER TANK 3............1491132110...........FILTER, OIL
2............518910020.............SPRINKLINGPIPE ASSY. 3............0481140140...........O-RING, OIL FILTER

t.c
1............956100034.............THROTTLE WIRE 1............1685165512...........GLOW PLUG
1............517342410.............CABLE, PUSH-PULL 1............1G82097010..........V-BELT
4............939010350.............SHOCK ABSORBER 1............1252141030...........CAP, FUEL TANK
1............1254541350...........FILTER, FUEL TANK

en
1............6C04055412..........SWITCH, STARTER
2............1524863700...........KEY, STARTER SWITCH
1............1152139013...........SWITCH, OIL

m
ip
NOTICE
qu
Part numbers on this Suggested Spare Parts list may
supersede/replace the part numbers shown in the
following parts lists.
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 35
 NAMEPLATES AND DECALS

12 16

om
104 26
25
13

8
CARSON, CALIF

t.c
99

en
46

m
13
105 9 96
12
17ip 71 97
103 72
qu

20
-E
nt

100
98
ou

92 95 94
sc

101

2 4
42
93
Di

102
51

PAGE 36 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 NAMEPLATES AND DECALS
NO. PART NO. PART NAME QTY. REMARKS

om
2 920108070 DECAL: FORWARD AND REVERSE 1
4 920217900 DECAL: GLOW LAMP 1
8 920215140 LABEL: MAIN SWITCH 1
9 920217140 DECAL: HORN (ICON) 1
12 920217130 DECAL: MIKASA MARK (W) 200L 2
13 920217110 DECAL: MIKASA MARK 35X70 2

t.c
16 920217340 DECAL: MODEL (OR) 1
17 920217860 DECAL: SPRINKLER 1
20 920217660 DECAL: CAUTION (BRAKE) 1
25 920217120 DECAL: MIKASA MARK (W) 250L 1
26 920217100 DECAL: MIKASA MARK 40X80 1

en
42 920202910 DECAL: BUZZER (HYDRAULIC) 1
46 920112570 DECAL: V-BELT, A-36 1
51 920217490 DECAL: MODEL 1
71 920206080 DECAL: E/G THROTTLE DIAL/E 1
72 920217150 DECAL: HEAD LAMP ICON 1

m
92 920202920 DECAL: CAUTION (BRAKE) 1
93 920205640 DECAL: WARNING (PARKING) 1
94 920212600 DECAL: CAUTION (VIB. ON-OFF) 1
95 920214100 DECAL: E/G FIRE WARNING 1
96
97
920200320
920104280
ip
DECAL: WATER TANK/EXP
DECAL: CAUTION/DRAINAGE
1
1
98 920203330 EAR PROTECTION LABEL 1
qu
99 920206280 DECAL: DANGER 1
100 920206290 DECAL: CAUTION (MANUAL/EXP) 1
101 920217830 DECAL: OPERATION 1
102 920217840 DECAL: WARNING (SLOPE) 1
103 920217850 DECAL: E/G SET R.P.M. 1
-E

104 920201910 DECAL: MQ MARK 110X100 1

105 920213000 DECAL, OIL TANK/EXP 1
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 37
 AXLE AND VIBRATOR ASSY.
7

om
8
6 4
9 2 112
111
1 3

t.c
C

2
116
117
2 D

en
118 6
A 7
8
9
115

m
101
12-2
109 B 12-1
110 2
11 12
ip 103
12-2
12-2 12-1 C
102 12-1 12
qu
105 12
11 39
12-2 15
107
12-1 38
4 106 37 40
12
30
-E

41 34
106-1 114 23 34-1
17
25 34-2

D
nt

28
19 28-1
28-2
33
35
22 32
ou

24 31
A 20
21 18-2
18-1
18 27 29
sc

B
Di

14

PAGE 38 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 AXLE AND VIBRATOR ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 518120790 FRAME 1
2 001221435 BOLT 14X35 16
3 518466220 RUBBER PLATE 1
4 953408650 SEAL CAP 100X10 2
6 518466210 WIRE ROPE 2
7 012212035 BOLT 12X35 ................................................4.................REPLACES P/N 001221235
8 030212300 WASHER, LOCK M12 4

t.c
9 518466180 SPACER 13X19X40XL15 4
11 518351420 SCRAPER 4
12 0105091025 BOLT 10X25 ................................................8.................REPLACES P/N 001221025
12-1 030210250 WASHER, LOCK M10 8

en
12-2 031110160 WASHER, FLAT M10 8
14 518120730 DRUM (F) 1
15 518120740 DRUM (R) 1
17 518351430 FLANGE 2
18 012010030 BOLT 10X30................................................12................REPLACES P/N 001221030

m
18-1 030210250 WASHER, LOCK M10 12
18-2 031110160 WASHER, FLAT M10 12
19 518120620 BRACKET, REAR DRUM/R 2
20 060405010 OIL SEAL
ip 2
21 046006308 BEARING 2
22 518351190 BEARING COVER (R) 2
23 009120412 SUNK HEAD BOLT 8X25 8
24 050300950 O-RING 2
qu
25 953408640 SEAL CAP 32X7 2
27 518351440 DRUM SHAFT (L) 2
28 012010030 BOLT 10X30 ...............................................12................REPLACES P/N 001221030
28-1 030210250 WASHER, LOCK M10 12
28-2 031110160 WASHER, FLAT M10 12
-E

29 518120630 BRACKET, REAR DRUM/LF 1

30 518120640 BRACKET, REAR DRUM/LR 1
31 060405010 OIL SEAL 2
32 046006308 BEARING 2
nt

33 518351200 BEARING COVER (L) 2

34 011208025 BOLT 8X25 ..................................................8.................REPLACES P/N 001220825
34-1 030208200 WASHER, LOCK M8 8
34-2 0401450080 WASHER, FLAT M8.....................................8.................REPLACES P/N 031108160
ou

35 050300950 O-RING 2
37 518466110 LOCK PIN, BRAKE 1
38 518466160 SPRING, BRAKE 1
39 025405025 SPRING PIN 5X25 1
40 518466120 LOCK HANDLE 1
sc

41 953408890 CAP, BRAKE 1

101 518351380 ROTARY SHAFT 1
102 518465960 ECCENTRIC ROTATOR 2
103 012210035 BOLT 10X35 ................................................4.................REPLACES P/N 001221035
Di

105 518465910 PULLEY 1

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 39
 AXLE AND VIBRATOR ASSY. CONTINUED
7

om
8
6 4
9 2 112
111
1 3

t.c
C

2
116
117
2 D

en
118 6
A 7
8
9
115

m
101
12-2
109 B 12-1
110 2
11 12
ip 103
12-2
12-2 12-1 C
102 12-1 12
12
qu
105
11 39
12-2 15
107
12-1 38
4 106 37 40
12
30
-E

41 34
106-1 114 23 34-1
17
25 34-2

D
nt

28
19 28-1
28-2
33
35
22 32
ou

24 31
A 20
21 18-2
18-1
18 27 29
sc

B
Di

14

PAGE 40 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 AXLE AND VIBRATOR ASSY. CONTINUED
NO. PART NO. PART NAME QTY. REMARKS

om
106 012210035 BOLT 10X35 ................................................1.................REPLACES P/N 001221035
106-1 030210250 WASHER, LOCK M10 1
107 952402330 WASHER 1
109 046006308 BEARING 1
110 080100900 STOP RING 1
111 046006208 BEARING 1

t.c
112 080200400 STOP RING 1
114 070100361 V-BELT A-36 1
115 518351390 GUARD, V-BELT 1
116 012210020 BOLT 10X20 ................................................2.................REPLACES P/N 001221020
117 030210250 WASHER, LOCK M10 2

en
118 031110160 WASHER, FLAT M10 2

m
ip
qu
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 41
 BODY ASSY.

om
26 127
28
26-1 128 22
29 26-2 129
25 105 58
101
24 28 104
27 128 29
126

t.c
23
27 107

125 92 103
124

en
123 102
30 106
102-1
121 91 102-2
B 122 C A
41
38 35
10

m
138 137 35-1
16 35-2
34
39
136 ip 7
134 132 110 36 37
110-1 D
141 40
110-2
17 109
131 110
qu
11-2
135 110-1
11-1
11 8 110-2
See “5OE0”
B 56
No.51
9
139
-E

140
61-2
61-1
1 A
20
61
nt

20-1
20-2

19 3 51
4 13
14 52
ou

2 20
14-1 20-1 54
14-2 20-2 53
48 18 49 D
44 C
48 49-1
sc

4 3 49-2
45 49-2 2
44
45
49-1
47 47 48
46 49 5
Di

50 46 48
50

PAGE 42 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 BODY ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 518120820 BASE 1
2 939010350 SHOCK ABSORBER 4
3 020316130 NUT M16 4
4 030216400 WASHER, LOCK M16 4
5 001221625 BOLT 16X25 4
7 518218650 HOOK 1
8 001221435 BOLT 14X35 2

t.c
9 030214350 WASHER, LOCK M14 2
10 518218660 COVER, ENGINE 1
11 012210020 BOLT 10X20 ................................................4.................REPLACES P/N 001221020
11-1 030210250 WASHER, LOCK M10 4

en
11-2 031110160 WASHER, FLAT M10 4
13 518218620 PUMP BRACKET 1
14 012010030 BOLT 10X30 ................................................4.................REPLACES P/N 001221030
14-1 030210250 WASHER, LOCK M10 4
14-2 031110160 WASHER, FLAT M10 4

m
16 518920020 BONNET COVER 1
17 092004008 SCREW 4X8 7
18 518467210 STAY, COVER (R) 1
19 518467220 STAY, COVER (L)
ip 1
20 0105091025 BOLT 10X25 ................................................2.................REPLACES P/N 001221025
20-1 030210250 WASHER, LOCK M10 2
20-2 031110160 WASHER, FLAT M10 2
22 518930020 WATER TANK, ORANGE 1
qu
23 952405950 WASHER 2
24 518466050 PLATE, WATER TANK 2
25 515449870 HOLDER, STOPPER 2
26 011006010 BOLT 6X10 ..................................................4.................REPLACES P/N 001220610
26-1 030206150 WASHER, LOCK M6 4
-E

26-2 952404470 WASHER, FLAT M6.....................................4.................REPLACES P/N 031106100

27 506434690 SPACER, WATER TANK 4
28 001221253 BOLT 12X65 4
29 030212300 WASHER, LOCK M12 4
nt

30 517338540 STOPPER 2
34 518466200 SEPARATE PIPE 1
35 011206020 BOLT 6X20 ..................................................2.................REPLACES P/N 001220620
35-1 030206150 WASHER, LOCK M6 2
ou

35-2 952404470 WASHER, FLAT M6.....................................2.................REPLACES P/N 031106100

36 954406210 CONNECTOR 3/8X12 1
37 954404221 COCK PT1/4, (AL)/L 1
38 954403241 COCK PT1/4, (AL)/R 1
39 959028721 HOSE 1
sc

40 515450440 WATER HOSE (R) 1

41 518466320 WATER HOSE (R) 1
44# 518351530 SPRINKLING PIPE 2
45# 515910050 CAP ASSY, W/BOLT, WASHER....................4.................INCLUDES ITEMS W/ @
Di

46@ 011206020 BOLT 6X20 ..................................................4.................REPLACES P/N 001220620

47@ 952404470 WASHER, FLAT M6.....................................4.................REPLACES P/N 031106100
48 515449900 CLAMP 4

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 43
 BODY ASSY. CONTINUED

om
26 127
28
26-1 128 22
29 26-2 129
25 105 58
101
24 28 104
27 128 29

t.c
126 23
27 107

125 92 103
124

en
123 102
30 106
102-1
121 91 102-2
B 122 C A
41
38 35
10

m
138 137 35-1
16 35-2
34
39
136 ip 7
134 132 110 36 37
110-1 D
141 40
110-2
17 109
qu
131 110
11-2
135 110-1
11-1
11 8 110-2
See “5OE0”
B 56
No.51
9
139
-E

140
61-2
61-1
1 A
20
61
nt

20-1
20-2

19 3 51
4 13
14
ou

2 20 52
14-1 20-1 54
14-2 20-2 53
48 18 49 D
44 C
49-1
sc

48
4 3 49-2
45 49-2 2
44
45
49-1
47 47 48
46 49
Di

5 46
50 48
50

PAGE 44 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 BODY ASSY. CONTINUED
NO. PART NO. PART NAME QTY. REMARKS

om
49 001220610 BOLT 6X10 T 4
49-1 030206150 WASHER, LOCK M6 4
49-2 031106100 WASHER, FLAT M6 4
50 518910020 SPRINKLING PIPE ASSY............................2.................INCLUDES ITEMS W/ #
51 515336210 BUMPER 2
52 515449720 SPACER, BUMPER 4
53 012210040 BOLT 10X40 ................................................4.................REPLACES P/N 001221040

t.c
54 031110160 WASHER, FLAT M10 4
56 233010020 RIVET 2
58 507010110 CLAMP 1
61 014208020 BOLT 8X20...................................................2.................REPLACES P/N 001220820

en
61-1 030208200 WASHER, LOCK M8 2
61-2 0401450080 WASHER, FLAT M8.....................................2.................REPLACES P/N 031108160
91 518351500 CENTER FLEX 1
92 009110038 SOCKET HEAD BOLT 8X30 ZN 3
101 915533002 ENGINE,KUBOTA EA330-E3-NB3-HGMS 1

m
102 012210035 BOLT 10X35 ................................................4.................REPLACES P/N 001221035
102-1 030210250 WASHER, LOCK M10 4
102-2 031110160 WASHER, FLAT M10 4
103 956100034 THROTTLE WIRE
ip 1
104 58042 WASHER, FLAT M4.....................................1.................REPLACES P/N 031104080
105 402010110 COIL SPRING..............................................1.................REPLACES P/N 0830000010
106 518351240 COUPLING FLANGE 1
qu
107 009110070 SOCKET HEAD BOLT 10X25 3
109 518218680 ENGINE GUARD 1
110 012210020 BOLT 10X20 ................................................3.................REPLACES P/N 001221020
110-1 030210250 WASHER, LOCK M10 4
110-2 031110160 WASHER, FLAT M10 4
-E

121 050710120 O-RING 1

122 953408610 CAP, DRAIN 1
123 954408620 ADAPTER, HOSE NIPPLE 1
124 954408730 HOSE, NIPPLE 1
nt

125 954408580 STRAINER 1

126 022910280 NYLON NUT M10 1
127 001241030 BOLT 10X30 1
128 033910160 WASHER, FLAT M10 2
ou

129 954300342 CAP, WATER TANK 1

131 518351590 HOLDER, ROD 1
132 952408750 WASHER 7
133 033910260 WASHER, FLAT M5 2
134 033910270 WASHER, FLAT M6 1
sc

135 025911030 SNAP PIN 2

136 025911020 SNAP PIN 1
137 518010040 BLIND RIVET 7
138 518218710 RUBBER HINGE 1
Di

139 518466260 BUTTON HEAD PIN, COVER 2

140 518466290 BONNET STRAP 2
141 518466250 ROD, COVER 1
MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 45
 HYDRAULIC SYSTEM ASSY.

om
29 30

25 18 2
3
26 4 2-1
11

t.c
7
2-2
5 12
24
6

en
17 1
22 16
15
30
14

m
53

28
ip 21 10
9
20
qu
31 2
2-2
44 2-1
-E

34
39
nt

33

34 31
33
37
ou

35-2
35-1
35
43 35-2
sc

42 35-1
35

40 41 38
36
Di

36

PAGE 46 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 HYDRAULIC SYSTEM ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 518120830 OIL TANK 1
2 0105091025 BOLT 10X25 ................................................4.................REPLACES P/N 001221025
2-1 030210250 WASHER, LOCK M10 4
2-2 031110160 WASHER, FLAT M10 4
3 366460300 OIL GAUGE ASSY. 1
4 953404670 COPPER PACKING 1
5 518466240 BREATHER, OIL TANK 1

t.c
6 953402930 COPPER PACKING 1
7 458451630 BREATHER CAP 1
9 953405270 PLUG 1
10 953405260 PACKING 1

en
11 953405840 DRAIN PLUG 1
12 953402930 COPPER PACKING 1
14 954003000 NIPPLE 1
15 954003080 OIL FILTER ASSY. 1
16 954003030 MALE CONNECTOR 1

m
17 954002970 OIL HOSE 1
18 954003020 MALE CONNECTOR, O-RING 1/2 1
20 954003070 MALE CONNECTOR 1
21 954003050 OIL HOSE 3/8"
ip 1
22 954003060 MALE CONNECTOR, O-RING 3/8 1
24 518120880 VARIABLE PUMP 1
25 009110019 SOCKET HEAD BOLT 10X30 2
26 952404110 COLLAR 10.5X22X5 2
qu
28 954002960 OIL HOSE 3/8 90-1005 320L 1
29 954002950 OIL HOSE 3/8 90-1005 470L 1
30 954002990 ELBOW 90°, PF3/8" 2
31 954002980 CONNECTOR, SWIVEL PF3/8" 2
33 518351480 OIL MOTOR 2
-E

34 050710060 O-RING 2
35 012210035 BOLT 10X35 ................................................8.................REPLACES P/N 001221035
35-1 030210250 WASHER, LOCK M10 8
35-2 031110160 WASHER, FLAT M10 8
nt

36 954003040 CONNECTOR, ELBOW PF1/2" 4

37 518466330 OIL PIPE (L) 2
38 518466340 OIL PIPE (R) 2
39 518466080 HOLDER, PIPE 2
ou

40 014208020 SOCKET HEAD BOLT 8X20 .......................4.................REPLACES P/N 001520820

41 518465970 GUARD, PIPE 2
42 012210020 BOLT 10X20 ................................................2.................REPLACES P/N 001221020
43 031110160 WASHER, FLAT M10 2
44 518466360 OIL PIPE (A-B) 1
sc

53 954001380 OIL ELEMENT 1

Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 47
 ELECTRIC DEVICE ASSY.
39-1 39

om
72
72
71 41
45
64 40 46
57 19 49
58

t.c
A 51
72 47 7
6
56
55 7
20 63 6

en
34
42 83
50
5
33 71
54
C
A 72 82

m
35 48 87
36 86
87
72 84 85
33-1 ip 81
70 3
C
73 72
4
75
qu
76 3
24
72 28 B 8
25 72 2
2-1
-E

67
4 2-2
23
1
27
26 72
29
nt

30
30-1 13
30-2

17
ou

17-1
72 104 B

101
sc

62
102 61
103 105-2 62-2
18-2 62-1
Di

105-1 18-1
105 18

PAGE 48 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 ELECTRIC DEVICE ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 518218670 BASE, BATTERY 1
2 014208020 BOLT 8X20 ..................................................4.................REPLACES P/N 001220820
2-1 030208200 WASHER, LOCK 4
2-2 0401450080 WASHER, FLAT...........................................4.................REPLACES P/N 031108160
3 515448210 ROD, BATTERY 2
4 025910060 SNAP PIN 2

t.c
5 518465980 BATTERY HOLDER 1
6 952404470 WASHER, FLAT M6.....................................2.................REPLACES P/N 031106100
7 022710607 NYLON NUT M6 2
8 601303150 RUBBER PLATE 1
13 954406400 CLAMP 1

en
17 955200030 HEAD LAMP ASSY 12V-25W......................1.................INCLUDES ITEMS W/@
17-1@ 955200060 PILOT LAMP, 12V 1
18 011206020 BOLT 6X20 ..................................................2.................REPLACES P/N 001220620
18-1 030206150 WASHER, LOCK M6 2
18-2 952404470 WASHER, FLAT M6.....................................2.................REPLACES P/N 031106100

m
19 304402600 CAP 1
20 515449910 SWITCH, W/CORD 1
23 955405910 MICRO-SWITCH
ip 1
24 515453230 READ CORD, MICRO-SWITCH 1
25 955405450 COVER, MICRO-SWITCH 1
26 001200430 BOLT 4X30 2
27 58042 WASHER, FLAT M4.....................................2.................REPLACES P/N 031104080
qu
28 022710405 NYLON NUT M4 2
29 518466060 STAY, SWITCH 1
30 014208020 BOLT 8X20 ..................................................2.................REPLACES P/N 001220820
30-1 030208200 WASHER, LOCK M8 2
30-2 0401450080 WASHER, FLAT M8.....................................2.................REPLACES P/N 031108160
-E

33 1G34763590 STARTER SWITCH ASSY............................1.................INCLUDES ITEMS W/ $

33-1$ 1524863700 KEY, IGNITION SWITCH 1
34 518351570 WIRE HARNESS ASSY. 1
35 518466070 BRACKET, KEY SWITCH 1
nt

36 091005012 SCREW 5X12 4

39 516217920 SEESAW SWITCH/MAG, CLUTCH.............1.................INCLUDES ITEMS W/ %
39-1% 516010140 SWITCH COVER 1
40 516458960 SWITCH PLATE 1
ou

41 091505015 SCREW 5X15 SW 4

42 020305040 NUT M5 1
45 955010312 HOUR METER/SENDEC 1
46 518466490 LEAD CORD, H-METER (+) SW 1
sc

47 518466500 LEAD CORD, H-METER (-) GROUND 1

48 515450380 WIRE HARNESS 1
49 091003015 SCREW 3X15 2
50 020303020 NUT M3 2
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 49
 ELECTRIC DEVICE ASSY. CONTINUED
39-1 39

om
72
72
71 41
45
64 40 46
57 19 49

t.c
58
A 51
72 47 7
6
56
55 7
20 63 6

en
34
42 83
50
5
33 71
54
C
A 72 82

m
35 48 87
36 86
87
72 84 85
33-1 ip 81
70 3
C
73 72
4
75
qu
76 3
24
72 28 B 8
25 72 2
2-1
-E

67
4 2-2
23
1
27
26 72
29
nt

30
30-1 13
30-2

17
ou

17-1
72 104 B

101
sc

62
102 61
103 105-2 62-2
18-2 62-1
Di

105-1 18-1
105 18

PAGE 50 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 ELECTRIC DEVICE ASSY. CONTINUED
NO. PART NO. PART NAME QTY. REMARKS

om
51 031103050 WASHER, FLAT M3 2
54 955408260 GLOW LAMP 1
55 1569465990 LAMP TIMER 1
56 516349450 WIRE HARNESS 1
57 0105050616 BOLT 6X15 ..................................................1.................REPLACES P/N 001220615
58 952404470 WASHER, FLAT M6.....................................1.................REPLACES P/N 031106100

t.c
61 955300420 HORN ASSY., DC12V 1
62 011006010 BOLT 6X10 ..................................................1.................REPLACES P/N 001220610
62-1 030206150 WASHER, LOCK M6 1
62-2 952404470 WASHER, FLAT M6.....................................1.................REPLACES P/N 031106100
63 955400800 HORN BUTTON ASSY. 1

en
64 955405980 COVER, HORN BUTTON 1
67 955300400 BUZZER 1
70 518351580 WIRE HARNESS ASSY (L-H-C) 1
71 959021826 SPIRAL TUBE 2
72 507010110 CLAMP 12

m
73 511010040 CLAMP 1
75 959021911 TUBE 1
76 507010110 CLAMP 7
81 515448530 BATTERY CORD (+) 1
82
83
955300480
955300460
ip
BATTERY TERMINAL (+) 1
TERMINAL COVER (+)................................1.................REPLACES P/N 955300500
84 515447360 BATTERY CORD (-) 1
qu
85 955300490 BATTERY TERMINAL (-) 1
86 955300470 TERMINAL COVER (-).................................1.................REPLACES P/N 955300510
87 506010070 CLAMP 2
101 518351510 MAGNETIC CLUTCH 1
102 518466170 WASHER, STEPPED 1
-E

103 009110080 SOCKET HEAD BOLT 6X30 ZN 1

104 011206020 BOLT 6X20 ..................................................1.................REPLACES P/N 001220620
105 011006010 BOLT 6X10 ..................................................1.................REPLACES P/N 001220610
105-1 030206150 WASHER, LOCK M6 1
nt

105-2 952404470 WASHER, FLAT M6.....................................1.................REPLACES P/N 031106100

ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 51
 DEADMAN SYSTEM CONTROL ASSY.

om
42
62
48 41
53 83
52 51 49 43
44
46 45
54 47

t.c
47 84
55 46
57
56 71 39
58 83

21 73

en
66

72 23
27 24 58
27 67
23 68 59
69 1
19 28 32 10

m
60 6
28 33 59
34
7
30
22 ip
84
20 83 31 A 9
39
8
qu
37
2
83 15 4 3
93 3 4
110 82 2
37 109 104 81
-E

105 B
83 106 16 5
110
93 105
37
108
83
91 107 13
nt

93
103 30 12 14
102
34
A
ou

34
30 49
34

B
sc

38

36 14 11
101
13
35
Di

37

PAGE 52 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 DEADMAN SYSTEM CONTROL ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 518120800 HANDLE 1
2 012210035 BOLT 10X35.................................................2.................REPLACES P/N 001221035
3 030210250 WASHER, LOCK M10 2
4 952408680 WASHER 2
5 518466130 SHAFT, HANDLE 1
6# 959007140 T-KNOB, M12 1

t.c
7# 0039312000 NUT M12......................................................1.................REPLACES P/N 020312100
8# 517459710 STOPPER, HANDLE 1
9# 517459700 SPRING, HANDLE 1
10 515910090 HANDLE/STOPPER ASSY..........................1.................INCLUDES ITEMS W/ #
11 518466090 STOPPER, HANDLE/IN-OP 1

en
12 518466100 STOPPER, HANDLE/IN-HO 1
13 012210035 BOLT 10X35.................................................4.................REPLACES P/N 001221035
14 030210250 WASHER, LOCK M10 4
15 518351400 HANDLE COVER 1
16 011206020 BOLT 6X20...................................................4.................REPLACES P/N 001220620

m
19 518352810 TRAVELLING, LEVER 1
20 518467530 LEVER COVER 1
21 959300870 KNOB 1
22
23
24
464010010
458450660
952408970
WASHER
COLLAR
ip
DRY BUSHING 1
2
1
27 011208025 BOLT 8X25...................................................2.................REPLACES P/N 001220825
qu
28 020108060 NUT M8........................................................2.................REPLACES P/N 020308060
30 501011162 ROD END 3
31 517342410 PUSH-PULL CABLE 1
32 011606025 BOLT 6X25...................................................1.................REPLACES P/N 001220625
33 030206150 WASHER, LOCK M6 1
-E

34 952404470 WASHER 4
35 518351470 PV LEVER 1
36 025405032 SPRING PIN 5X32 1
37 014208020 BOLT 8X20...................................................4.................REPLACES P/N 001220820
nt

38 952408770 COLLAR 1
39 014208020 BOLT 8X20...................................................8.................REPLACES P/N 001220820
41 518466140 THROTTLE LEVER 1
42 959403840 BAR GRIP 1
ou

43 952408560 WASHER, BRASS 1

44 464010010 DRY BUSHING 1
45 011208025 BOLT 8X25...................................................1.................REPLACES P/N 001220825
46 458450660 WASHER 2
47 033910080 CONICAL WASHER, LOCK 2
sc

48 0105050616 BOLT 6X15...................................................1.................REPLACES P/N 001220615

49 020106050 NUT M6........................................................2.................REPLACES P/N 020306050
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 53
 DEADMAN SYSTEM CONTROL ASSY. CONTINUED

om
42
62
48 41
53 83
52 51 49 43
44
46 45
54 47

t.c
47 84
55 46
57
56 71 39
58 83

73

en
21
66

72 23
27 24 58
27 67
23 68 59
69 1
19 28 10

m
32 60 6
28 33 59
34
7
30
22 ip
84
20 83 31 A 9
39
8
qu
37
2
83 15 4 3
93 3 4
110 82 2
37 104
-E

109 81
105 B
83 106 16 5
110
93 105
37
108
83
91 107 13
nt

93
103 30 12 14
102
34
A
ou

34
30 49
34

B
sc

38

36 14 11
101
13
35
Di

37

PAGE 54 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 DEADMAN SYSTEM CONTROL ASSY. CONTINUED
NO. PART NO. PART NAME QTY. REMARKS

om
51 515447720 DISC PLATE, DEADMAN 1
52 030212300 WASHER, LOCK M12 1
53 0039312000 NUT M12......................................................1.................REPLACES P/N 020312100
54 518351460 ROD, DEADMAN 1
55 509436980 SPRING, DEADMAN 1
56 509436990 PROTECTOR, DEADMAN 1

t.c
57 507010110 CLAMP 1
58 464010010 DRY BUSHING 2
59 01420601 SOCKET HEAD SCREW 6X6......................2.................REPLACES P/N 099206006
60 509436960 ROD STOPPER, DEADMAN 1
62 515010080 DECAL, WINDOW SHADE RIVET 2

en
66 518352800 LEVER, JOINT, TRAVELLING 1
67 020310080 NUT M10 1
68 030210250 WASHER, LOCK M10 1
69 031110160 WASHER, FLAT M10 1
71 518351450 SHAFT, THROTTLE 1

m
72 518120680 TRAVELLING LEVER BRACKET 1
73 518120690 THROTTLE LEVER BRACKET 1
81 030206150 WASHER, LOCK M6 4
82 952404470 WASHER, FLAT M6.....................................4.................REPLACES P/N 031106100
83
84
030208200
0401450080
ip
WASHER, LOCK M8 12
WASHER, FLAT M8.....................................8.................REPLACES P/N 031108160
91 518352580 CYLINDER, STAY 1
qu
93 952401560 WASHER 3
101 001820650 BOLT 6X50 1
102 022710607 NYLON NUT M6 1
103 515461610 OUTER SHAFT 1
104 515461600 INNER SHAFT 1
-E

105 518467400 CYLINDER, PISTON 2

106 518467390 SPRING, CYLINDER 1
107 506442930 CAP 1
108 515461590 CYLINDER 1
nt

109 515461580 LINK CAP 1

110 506442940 COLLAR 2
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 55
 KUBOTA EA330 — CYLINDER HEAD ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 56 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — CYLINDER HEAD ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1619403042 COMP., CYLINDER HEAD...........................1.................INCLUDES ITEMS W/ @
2@ 0631175022 PLUG, EXPANSION 1
3@ 1526196010 PLUG 1
4@ 0541100612 SPRING PIN 1
5@ 1626113540 GUIDE, INLET VALVE 1
6@ 1626113560 EXHAUST VALVE GUIDE 1

t.c
7 1497103412 STUD, CYLINDER HEAD 6
8 1921503512 HEAD NUT 6
9 1459503310 GASKET, CYL. HEAD 1
10 1T25173110 DRAIN COCK 1
22 1497114512 HEAD COVER 1

en
24 1497114520 PACKING, HEAD COVER 1
25 1526114620 NUT, HEAD COVER 1
26 1526114640 WASHER, HEAD COVER 1
27 1526114630 PACKING, HEAD COVER NUT 1
28 1526166630 COVER, DECOMP HOLE 1

m
29 1526366640 PACKING 1
30 0102350614 BOLT 2
41 1497213110 VALVE, INLET 1
42 1497213120 VALVE, EXHAUST 1
43
44
1526113240
162613330
ip
SPRING, VALVE
RETAINER, SPRING
2
2
45 1526113980 COLLET, VALVE SPRING 2
qu
46 1624113280 CAP, VALVE 2
47 1497114050 BRACKET CP, ROCKER ARM.....................1.................INCLUDES ITEMS W/ #
49# 0341050606 SCREW 1
50 1526114410 STUD 1
51 1526192010 NUT 1
-E

52 1526194010 WASHER, FLAT 1

53 1527114030 ROCKER ARM ASSY...................................2.................INCLUDES ITEMS W/ $
54$ 1526114232 SCREW, ADJUSTING 2
55$ 1526114240 NUT 2
nt

260 1497166322 SHAFT, DECOMPRESS 1

270 1526166350 BOLT, DECOMPRESS 1
280 0205650050 NUT 1
290 1497166552 STOPPER, DECOMPRESS 1
ou

301 0102350612 BOLT 1

310 1430166310 LEVER CP, DECOMPRESS 1
320 1970196850 O-RING 1
330 1497166210 SPRING, DECOMPRESS 1
340 0201450060 NUT 1
sc

350 0451260060 WASHER, LOCK 1

Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 57
 KUBOTA EA330 — CRANKCASE ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 58 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — CRANKCASE ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1441801010 CRANKCASE, CP........................................1.................INCLUDES ITEMS W/ #
2# 1497126710 PLUG, SEAL 2
3# 1430133630 PLUG, PIN 2
4# 0501200612 PIN, STRAIGHT 1
5# 0541100412 SPRING PIN 1
6# 1491194930 PIPE PIN 1

t.c
7# 1430133950 PIPE PIN 1
8# 0481600080 O-RING 2
9 1428602310 CYLINDER LINER 1
10 1497102350 O-RING 2
11 1497104710 COVER, CRANKCASE 1

en
12 1G10304720 GASKET, CASE COVER 1
13 0102350635 BOLT 2
14 0102350625 BOLT 5
15 0175450625 FLANGE BOLT 1
16 1442864602 REGULATOR ASSY. 1

m
17 1142064610 STAY, REGULATOR 1
18 0175450620 FLANGE BOLT 2
19 1441665050 HARNESS WIRE
ip 1
20 1524167580 CORD CLAMP 1
21 3435029380 CORD BAND 1
22 1527267570 CLAMP, CORD 1
31 1152139013 OIL SWITCH 1
qu
32 1497136112 HOLDER, OIL SIGNAL 1
33 0472400100 PACKING 1
34 1441665060 HARNESS WIRE 1
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 59
 KUBOTA EA330 — PISTON AND MAIN BEARING CASE ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 60 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — PISTON AND MAIN BEARING CASE ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1498104042 CASE COMP., MAIN BEARING...................1.................INCLUDES ITEMS W/ #
2# 1454196850 PLUG 1
3 1491135450 O-RING 1
4 0481111050 O-RING 1
5 0175450620 FLANGE BOLT 7
6 0151850620 STUD 2

t.c
7 0205650060 NUT 2
8 0451260060 WASHER, LOCK 2
9 1487123550 OIL SEAL 1
10 0461100500 CIR-CLIP, INTERNAL 1
11 1497135750 RING, OIL FILLER 1

en
12 1497135770 O-RING 2
21 1428621112 PISTON 1
22 1428621050 PISTON RING ASSY. 1
23 1526121310 PISTON PIN 1
24 1526121330 CIR-CLIP, INTERNAL 2

m
25 1569422010 CONNECTING ROD ASSY..........................1.................INCLUDES ITEMS W/ @
26@ 1526121980 BUSH, PISTON PIN 03 1
27@ 1538122140 BOLT, CONNECTING ROD 2
28@ 1569422310 METAL, CRANK PIN, STD/SET 1
28
28
1569422970
1569422980
ip
METAL, CRANK PIN 0.2
METAL, CRANK PIN 0.4
1
1
29 1498123014 COMP. CRANK SHAFT................................1.................INCLUDES ITEMS W/ %
qu
30% 1494123240 PLUG 1
31% 1498191430 BOLT, COUNTER WEIGHT 4
32 1497123450 BEARING, MAIN 1 1
33 1498123460 BEARING, MAIN 2 1
34 1497123590 STOPPER, BEARING 1
-E

35 0105350512 BOLT 2
36 1497124110 GEAR, CRANKSHAFT 1
37 0571200515 FEATHER KEY 1
38 1497126810 RETAINER, BEARING 1
nt

39 0175450614 FLANGE BOLT 1

41 1498123905 CRANKSHAFT ASSY. 1
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 61
 KUBOTA EA330 — GEAR CASE ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 62 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — GEAR CASE ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1610204020 COMP. CASE GEAR....................................1.................INCLUDES ITEMS W/ @
2@ 1430133630 PLUG, PIN 2
3@ 3673024630 PLUG 1
4@ 1497166290 PIN 1
5@ 1G10105550 JOINT, BREATHER 1
6 1459504130 PACKING GEAR CASE 1

t.c
7 0102350635 BOLT 2
8 0102350665 BOLT 9
9 0102350680 BOLT 1
10 1142005012 BREATHER ASSY........................................1.................INCLUDES ITEMS W/ $
11$ 1497105210 VALVE, BREATHER 1

en
12$ 0302450408 SCREW, W/WASHER 2
13$ 0205450040 NUT 2
14 0302450510 SCREW, W/WASHER 2
15 1459505430 PACKING, BREATHER 1
16 1497105470 INNER PLATE, BREATHER 1

m
17 1497105370 OIL GUARD, BREATHER 1
18 0102350612 BOLT 2
19 0966450300 TUBE, FUEL 1
20 0931888085 BAND, HOSE 1
21
22
1497105380
1527267570
ip
OIL GUARD, BREATHER 2
CLAMP, CORD
1
2
23 1527267570 CLAMP, CORD 1
qu
31 1491132110 OIL FILTER 1
32 0481140140 O-RING 1
33 E915133140 PLUG, OIL FILLER 1
34 0481750300 O-RING 1
35 0771501607 BALL 1
-E

36 1491136950 SPRING 1
37 1142036910 PLUG 1
38 0472400160 PACKING 1
41 1497136410 GAUGE, OIL 1
nt

51 1491135400 ROTOR ASSY., OIL PUMP 1

52 1142035432 COVER, OIL PUMP 1
53 1491135450 O-RING 1
54 0175450612 BOLT, FLANGE 3
ou

61 1G39404800 COMP., APRON SIDE..................................1.................INCLUDES ITEMS W/ #

62# 1G39488550 COVER, COMP. 1
63 0175450612 BOLT, FLANGE 2
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 63
 KUBOTA EA330 — GOVERNOR ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 64 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — GOVERNOR ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1G67315550 TAPPET 2
2 1497115110 ROD, PUSH 2
3 1497116010 CAMSHAFT ASSY. ......................................1.................INCLUDES ITEMS W/ @
4@ 1497116150 CAMSHAFT 1
5@ 1497116510 GEAR, CAMSHAFT 1
6@ 1527116240 KEY, FEATHER 1
7 1497116270 STOPPER, CAMSHAFT 1

t.c
8 0102350616 BOLT 2
9 1497124010 GEAR CP, IDLE ...........................................1.................INCLUDES ITEMS W/ #
10# 1526124980 BUSH, IDLE GEAR 2
11 1526124360 COLLAR, IDLE GEAR 1 1

en
12 1526124370 COLLAR, IDLE GEAR 2 1
13 1526124320 CIR-CLIP, IDLE GEAR 1
14 1497124250 SHAFT, IDLE GEAR 1
15 0102350616 BOLT 3
21 1G19654020 APPARATUS, FUEL LIMIT 1

m
23 1526154220 CAP NUT 1
24 1533196650 PACKING .....................................................2.................REPLACES P/N 1510933660
26 1465856543 SPRING 1
27 1199257040 LEVER ASSY, SPEED CONTROL ..............1.................INCLUDES ITEMS W/ $
ip
28$ 0122250608 BOLT 1
29 1497157230 SHAFT CP, SPEED CONTROL 1
30 1526195010 KEY, FEATHER 1
31 0481600070 O-RING 1
qu
32 1526357380 FRICTION PLATE 1
33 0201260060 NUT 1
34 0205650060 NUT 1
35 0401360060 WASHER, FLAT 1
36 0401250080 WASHER, FLAT 1
-E

41 1497155052 GOVERNOR WEIGHT ASSY.......................1.................INCLUDES ITEMS W/ %

42% 1491155280 PIN, GOVERNOR WEIGHT 2
43% 0401250060 WASHER, FLAT 2
44% 1909015390 SPLIT COTTER PIN 2
nt

45 0102350614 BOLT 2
46 1491155310 SHAFT, GOVERNOR 1
47 1497156040 LEVER CP, GOVERNOR.............................1.................INCLUDES ITEMS W/ &
48& 0771500201 BALL 1
ou

49 1497156040 SHAFT, GOVERNOR LEVER 1

50 0302450514 SCREW, W/WASHER 1
51 0633135010 PLUG 1
52 0472400100 PACKING 1
53 1498156410 SPRING, GOVERNOR 1
sc

54 1491156480 SPRING, IDLING 1

55 0771503205 BALL 1
61 1115157890 NUT, LOCK 1
62 1622154420 CAP 1
63 0102350618 BOLT 1
Di

64 0105550630 BOLT 1

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 65
 KUBOTA EA330 — INJECTION PUMP ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 66 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — INJECTION PUMP ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1497142922 HOLDER, JET START 1
2 0102350616 BOLT 2
3 1G11152110 SHIM, 0.10MM 2
3 1497152110 SHIM, 0.15MM, PUMP ADJUSTING 4
4 1G19452110 SHIM, 0.225MM 1
4 1497152120 SHIM, 0.50MM, PUMP ADJUSTING 1

t.c
5 1G11151012 ASSY. PUMP, INJECTION............................1.................INCLUDES ITEMS W/ @
6 0102350622 BOLT 3
7 1G10153710 PIPE, INJECTION 1
8 1497153852 PIPE CLAMP 1
9 0175450614 FLANGE BOLT 1

en
10@ 1491151320 SCREW 1
11@ 1410751340 PACKING 2
21 1G10153900 KIT HOLDER, NOZZLE................................1.................INCLUDES ITEMS W/ #
22# 1584153622 GASKET 1
23# 1907753650 SEAL, HEAT 1

m
24 1J13095680 JOINT, NOZZLE HOLDER 1
25 1685165512 GLOW PLUG 1
26 0276150040 FLANGE NUT 1
27 0401360040 WASHER, FLAT 1
ip
qu
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 67
 KUBOTA EA330 — NOZZLE HOLDER ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 68 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — NOZZLE HOLDER ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1610153900 KIT HOLDER, NOZZLE................................1.................INCLUDES ITEMS W/ #
2# 1584192030 NUT 1
3# 1584153230 WASHER, ADJUSTING, 0.900MM 1
4# 1584153170 SPRING, NOZZLE 1
5# 1584153350 PIECE, DISTANCE 1
6# 1584153160 ROD, BUSH 1

t.c
7# 1647553280 NUT, NOZZLE 1
8# 1584194040 WASHER 1
9# 1610153610 PIECE, NOZZLE 1
10 1584198100 WASHER ASSY., ADJUSTING....................1.................INCLUDES ITEMS W/ $
11#$ 1584153230 WASHER, ADJUSTING, 0.900MM 1

en
11$ 1584198510 WASHER, ADJUSTING, 0.925MM 1
11$ 1584198520 WASHER, ADJUSTING, 0.950MM 1
11$ 1584198530 WASHER, ADJUSTING, 0.975MM 1
11$ 1584198540 WASHER, ADJUSTING, 1.000MM 1
11$ 1584198550 WASHER, ADJUSTING, 1.025MM 1

m
11$ 1584198560 WASHER, ADJUSTING, 1.050MM 1
11$ 1584198570 WASHER, ADJUSTING, 1.075MM 1
11$ 1584198580 WASHER, ADJUSTING, 1.100MM 1
11$ 1584198590 WASHER, ADJUSTlNG, 1.125MM 1
11$
11$
1584198600
1584198610
ip
WASHER, ADJUSTING, 1.150MM
WASHER, ADJUSTING, 1.175MM
1
1
11$ 1584198620 WASHER, ADJUSTING, 1.200MM 1
qu
11$ 1584198630 WASHER, ADJUSTING, 1.225MM 1
11$ 1584198640 WASHER, ADJUSTING, 1.250MM 1
11$ 1684198650 WASHER, ADJUSTING, 1.275MM 1
11$ 1584198660 WASHER, ADJUSTING, 1.300MM 1
11$ 1584198670 WASHER, ADJUSTING, 1.325MM 1
-E

11$ 1584198680 WASHER, ADJUSTING, 1.350MM 1

11$ 1584198690 WASHER, ADJUSTING, 1.375MM 1
11$ 1584198700 WASHER, ADJUSTING, 1.400MM 1
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 69
 KUBOTA EA330 — NOZZLE HOLDER ASSY.(CONTINUED)

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 70 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — NOZZLE HOLDER ASSY.(CONTINUED)
NO. PART NO. PART NAME QTY. REMARKS

om
11$ 1584198710 WASHER, ADJUSTING, 1.425MM 1
11$ 1584198720 WASHER, ADJUSTING, 1.450MM 1
11$ 1584198730 WASHER, ADJUSTING, 1.475MM 1
11$ 1584198740 WASHER, ADJUSTING, 1.500MM 1
11$ 1584198750 WASHER, ADJUSTING, 1.525MM 1
11$ 1584198760 WASHER, ADJUSTING, 1.550MM 1

t.c
11$ 1584198770 WASHER, ADJUSTING, 1.575MM 1
11$ 1584198780 WASHER, ADJUSTING, 1.600MM 1
11$ 1584198790 WASHER, ADJUSTING, 1.625MM 1
11$ 1584198800 WASHER, ADJUSTING, 1.650MM 1
11$ 1584198810 WASHER, ADJUSTING, 1.675MM 1

en
11$ 1584198820 WASHER, ADJUSTING, 1.700MM 1
11$ 1584198830 WASHER, ADJUSTING, 1.725MM 1
11$ 1584198840 WASHER, ADJUSTING, 1.750MM 1
11$ 1584198850 WASHER, ADJUSTING, 1.775MM 1
11$ 1584198860 WASHER, ADJUSTING, 1.800MM 1

m
11$ 1584198870 WASHER, ADJUSTING, 1.825MM 1
11$ 1584198880 WASHER, ADJUSTING, 1.850MM 1
11$ 1584198890 WASHER, ADJUSTING, 1.875MM 1
11$ 1584198900 WASHER, ADJUSTING, 1.900MM 1
11$
11$
1584198910
1584198920
ip
WASHER, ADJUSTING, 1.925MM
WASHER, ADJUSTING, 1.950MM
1
1
22# 1584153622 GASKET 1
qu
23# 1907753650 SEAL, HEAT 1
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 71
 KUBOTA EA330 — FUEL TANK ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 72 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — FUEL TANK ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1G19641020 ASSY TANK, FUEL SUB .............................1.................INCLUDES ITEMS W/ @
2 1252141030 CAP ASSY, FUEL TANK ..............................1.................INCLUDES ITEMS W/ #
3# 1252141340 PACKING, TANK CAP 1
4@ 1387141710 GAUGE, FUEL 1
5@ 1387141770 CLIP 2
6@ 1254541350 FILTER (FUEL TANK) 1

t.c
7 0175450820 FLANGE BOLT 2
8 1428941370 WASHER (FUEL TANK) 2
9 0175450855 FLANGE BOLT 1
10 1428941130 SUPPORT, FUEL TANK 1
11 0175450630 FLANGE BOLT 2

en
12 1G12201750 HOOK, ENGINE 1
13 0175450830 FLANGE BOLT 1
14 1115177380 WASHER, FLAT 2
15 6819193722 COLLAR 2
21 1427942010 PIPE ASSY, FUEL 1 ....................................1.................INCLUDES ITEM W/ &

m
22& 1491142750 PIPE CLIP 2
23 1497142020 PIPE ASSY, FUEL 2 ....................................1.................INCLUDES ITEM W/ +
24+ 1491142750 PIPE CLIP 2
25 1411142410 JOINT EYE 1
26
27*
1427942200
1024442320
ip
PIPE ASSY, AIR VENT 2 2 INCLUDES ITEM W/ *
PIPE CLIP ...................................................4.................REPLACES P/N 1497142750
28 1427942500 PIPE ASSY, OVER FLOW ...........................1.................INCLUDES ITEM W/ ^
qu
29^ 1024442320 PIPE CLIP ...................................................2.................REPLACES P/N 1497142750
30 1497143010 FUEL FILTER ASSY ....................................1.................INCLUDES ITEMS W/ $
31$ 1T02143820 SPRING, VALVE 1
32$ 0481606100 O-RING 1
33 1T02143830 SCREW, LEVER 1
-E

34$ 1T02143560 ELEMENT ASSY/FO 1

35$ 0481600100 O-RING FILTER 1
36$ 1T25143100 CUP ASSY, FILTER .....................................1.................INCLUDES ITEMS W/ %
37$% 1T02143580 FILTER CUP 1
nt

38$% 1A00188430 LABEL, FUEL 1

39$ 1T02143590 RING RETANING 1
40$ 0481600390 O-RING, FILTER CUP 1
41 0112350845 BOLT 1
ou

42 1527267570 CLAMP, CORD 1

sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 73
 KUBOTA EA330 — AIR CLEANER ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 74 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — AIR CLEANER ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1497111012 CLEANER ASSY., AIR ................................1.................INCLUDES ITEMS W/ @
2@ 1497111180 ELEMENT, AIR CLEANER 1
3@ 1497111050 BODY CP 1
4@ 1497111520 O-RING 1
5@ 1491111460 BOLT, SETTING 1
6@ 1497111170 GASKET 1

t.c
7@ 1497111100 CASE CP 1
8@ 1491111920 GROMMET 1
9@ 1491111530 WING NUT 1
10 1497188450 LABEL 1
11 1497111614 FLANGE, AIR CLEANER 1

en
12 1497111650 PACKING, FLANGE 1
13 0102350622 BOLT 1
14 0102350632 BOLT 2
15 1G10105560 JOINT, BREATHER 1

m
ip
qu
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 75
 KUBOTA EA330 — MUFFLER ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 76 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — MUFFLER ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
21 1497112112 MUFFLER 1
22 1459512230 GASKET, MUFFLER 1
23 0151350816 STUD BOLT 3
24 0211450080 NUT 3
25 1491112412 PIPE, MUFFLER 1
26 1443112430 BAND, PIPE 1

t.c
27 1192412470 COVER, MUFFLER PIPE 1
28 0105350608 BOLT 2
29 0451260060 WASHER, LOCK 2
30 1497112720 COVER MUFFLER FLANGE 1 1
31 0105350608 BOLT 2

en
32 0451260060 WASHER, LOCK 2

m
ip
qu
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 77
 KUBOTA EA330 — RADIATOR AND FAN ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 78 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — RADIATOR AND FAN ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1497172062 RADIATOR ASSY ........................................1.................INCLUDES ITEMS W/ @
2@ 1113172030 CAP, RADIATOR ..........................................1.................INCLUDES ITEMS W/ $
3@$ 1113187240 LABEL, CAUTION 1
4 1497172120 PACKING, RADIATOR 1
5 0151850616 STUD BOLT 2
6 1522188210 STUD 2
7 0201450060 NUT 4

t.c
8 0451260060 WASHER, LOCK 4
9 1497172140 BASE, RADIATOR 1
10 1459572450 GASKET 1
11 0175450618 FLANGE BOLT 9
13 1497172250 NET, RADIATOR 1

en
14 0182050635 BOLT, KNOB 2
15 1441672210 RADIATOR COVER 1
16 0102350616 BOLT 1
21 1G19674010 ASSY FAN, COOLING ................................1.................INCLUDES ITEMS W/ %
22% 1G19674100 COMP. BRACKET, FAN 1

m
23% 1G19674110 FAN 1
24% 1497274140 SHAFT, FAN 1
25% 1497274170 WASHER, FAN 1
ip 1
26% 1498274250 PULLEY, FAN 1
27% 1497274240 WASHER, FAN 2 2
28% 1497274250 PULLEY, FAN 1
29 0211250120 NUT 1
qu
30 0451260120 WASHER, LOCK 1
31 0102350616 BOLT 2
32 0102350620 BOLT 2
33 1497174120 COVER, FAN 1
34 0102350660 BOLT 2
-E

41 1497174280 PULLEY, FAN DRIVE 1

42 0105350614 BOLT 3
43 0451260060 WASHER, LOCK 3
44 1G82097010 V-BELT 1
nt

45 1497174302 ASSY PULLEY TENSION 1

46 1454174322 PULLEY, TENSION 1
47 1497174410 SUPPORT, TENSION PULLEY 1
48 1491174770 CAP 1
ou

49 0205250080 NUT 1
50 0451250080 WASHER, LOCK .........................................1.................REPLACES P/N 0451260080
51 1497191310 BOLT, REAMER 1
52 1497174362 ARM, TENSION PULLEY 1
53 0512250816 JOINT PIN 1
sc

54 0401250080 WASHER, FLAT 1

55 0551150215 SPLIT COTTER PIN 1
56 1970174940 TENSION BOLT 1
57 0201450060 NUT 1
58 1497174952 GUIDE, TENSION BOLT 1
Di

59 0102350612 BOLT 2

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 79
 KUBOTA EA330 — FLYWHEEL AND STARTER ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 80 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — FLYWHEEL AND STARTER ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
1 1173725010 FLYWHEEL COMP. .....................................1.................INCLUDES ITEMS W/ @
2@ 1948463820 RING GEAR 1
3 1498195010 KEY, FEATHER 1
4 1454123350 NUT, FLYWHEEL 1
5 1428923370 WASHER FLYWHEEL 1
6 1173725330 COVER, FLYWHEEL 1
7 0102350614 BOLT 4

t.c
11 1428963010 STARTING MOTOR ASSY. 1
12 1428963890 SUPPORT, STARTER 1
13 0177451030 FLANGE BOLT 2
14 0102350620 BOLT 1
15 0102350622 BOLT 2

en
16 0501200614 PIN, STRAIGHT 2
17 0401250080 WASHER, FLAT 1
18 0211450080 NUT 1
19 0451250080 WASHER, LOCK .........................................1.................REPLACES P/N 0451260080
21 1428963010 STARTING MOTOR ASSY. ..........................1.................INCLUDES ITEMS W/ %

m
22% 1119763080 YOKE ASSY 1
23% 1119763070 ARMATURE ASSY. ......................................1.................INCLUDES ITEMS W/#
24%# 1146063500 BEARINGip 1
25%# 1146063530 BEARING 1
26% 1623563040 STARTER KIT 1
27% 1428963030 HOUSING ASSY. 1
28% 1428963020 SWITCH ASSY, MAGNETIC 1
qu
29% 1666163200 FRAME (END) 1
30% 1738163380 HOLDER ASSY, BRUSH .............................1.................INCLUDES ITEMS W/ $
31%$ 1540163390 BRUSH SPRING 4
32% 1146063270 GEAR (2) 1
33% 1146063110 RETAINER 1
-E

34% 1921263100 ROLLER 5

35% 1921297130 BALL 1
36% 1146063120 SPRING 1
37% 1146093310 BOLT 2
nt

38% 1551196660 O-RING 2

39% 1551163760 BOLT ASSY. 2
40% 1628563570 PIPE, DRAIN 1
41% 1396392010 NUT 1
ou

42% 1119763320 BOLT 2

43% 1117363130 COVER, TERMINAL 1
44% 1628592010 NUT 1
51 1G34763590 SWITCH ASSY., STARTER W/KEYS...........1.................INCLUDES ITEMS W/ @
52@ 3272155400 SWITCH ASSY., STARTER..........................1.................INCLUDES ITEMS W/ +
sc

53@+ 6C04055412 SWITCH, STARTER 1

54@+ 3272155430 COVER, STARTER SWITCH 1
55@ 1524863700 KEY, STARTER SWITCH 1
56 5461141120 CAP, STARTER SWITCH 1
57 1142087520 LABEL, STARTER SWITCH 1
Di

61 1569465990 LAMP TIMER 1

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 81
 KUBOTA EA330 — NAMEPLATE AND DECALS ASSY.

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

PAGE 82 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 KUBOTA EA330 — NAMEPLATE AND DECALS ASSY.
NO. PART NO. PART NAME QTY. REMARKS

om
21 1G19489153 OPERATOR'S MANUAL/EXP 1
22 1G19488110 LABEL: EMBLEM-E3 1
23 1G19488210 LABEL: ENGINE, CAUTION 1
25 1479988220 LABEL: CAUTION 1
26 1G19488410 LABEL: CAUTION, FUEL 1
27 1918788360 LABEL: ENGINE HOOK 1

t.c
en
m
ip
qu
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 83
 TERMS AND CONDITIONS OF SALE — PARTS
PAYMENT TERMS 5. Parts must be in new and resalable Multiquip reserves the right to quote and
condition, in the original Multiquip sell direct to Government agencies, and to

om
Terms of payment for parts are net 30 days.
package (if any), and with Multiquip part Original Equipment Manufacturer accounts
FREIGHT POLICY numbers clearly marked. who use our products as integral parts of their
6. The following items are not returnable: own products.
All parts orders will be shipped collect or
prepaid with the charges added to the invoice. a. Obsolete parts. (If an item is in the SPECIAL EXPEDITING SERVICE
All shipments are F.O.B. point of origin. price book and shows as being
Multiquip’s responsibility ceases when a A $35.00 surcharge will be added to the
replaced by another item, it is
invoice for special handling including bus

t.c
signed manifest has been obtained from the obsolete.)
carrier, and any claim for shortage or damage shipments, insured parcel post or in cases
b. Any parts with a limited shelf life where Multiquip must personally deliver the
must be settled between the consignee and
(such as gaskets, seals, “O” rings, parts to the carrier.
the carrier.
and other rubber parts) that were
MINIMUM ORDER purchased more than six months LIMITATIONS OF SELLER’S LIABILITY

en
prior to the return date. Multiquip shall not be liable hereunder for
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for c. Any line item with an extended damages in excess of the purchase price of
instructions regarding handling of orders not dealer net price of less than the item with respect to which damages are
meeting this requirement. $5.00. claimed, and in no event shall Multiquip be
d. Special order items. liable for loss of profit or good will or for any
RETURNED GOODS POLICY other special, consequential or incidental

m
e. Electrical components. damages.
Return shipments will be accepted and
credit will be allowed, subject to the following f. Paint, chemicals, and lubricants.
LIMITATION OF WARRANTIES
provisions: g. Decals and paper products.
ip No warranties, express or implied, are
1. A Returned Material Authorization h. Items purchased in kits. made in connection with the sale of parts or
must be approved by Multiquip prior to 7. The sender will be notified of any material trade accessories nor as to any engine not
shipment. received that is not acceptable. manufactured by Multiquip. Such warranties
8. Such material will be held for five made in connection with the sale of new,
qu
2. To obtain a Return Material Authorization,
a list must be provided to Multiquip working days from notification, pending complete units are made exclusively by a
Parts Sales that defines item numbers, instructions. If a reply is not received statement of warranty packaged with such
quantities, and descriptions of the items within five days, the material will be units, and Multiquip neither assumes nor
to be returned. returned to the sender at his expense. authorizes any person to assume for it
any other obligation or liability whatever in
a. The parts numbers and descriptions 9. Credit on returned parts will be issued
-E

connection with the sale of its products. Apart

must match the current parts price at dealer net price at time of the original
from such written statement of warranty,
list. purchase, less a 15% restocking
there are no warranties, express, implied or
b. The list must be typed or computer charge.
statutory, which extend beyond the description
generated. 10. In cases where an item is accepted, for of the products on the face hereof.
which the original purchase document
nt

c. The list must state the reason(s)

for the return. can not be determined, the price will be
based on the list price that was effective Effective: February 22, 2006
d. The list must reference the sales twelve months prior to the RMA date.
order(s) or invoice (s) under
11. Credit issued will be applied to future
ou

which the items were originally

purchased. purchases only.
e. The list must include the name PRICING AND REBATES
and phone number of the person Prices are subject to change without prior
requesting the RMA. notice. Price changes are effective on a
specific date and all orders received on or
sc

3. A copy of the Return Material Authorization

must accompany the return shipment. after that date will be billed at the revised price.
Rebates for price declines and added charges
4. Freight is at the sender’s expense. All for price increases will not be made for stock
parts must be returned freight prepaid to on hand at the time of any price change.
Multiquip’s designated receiving point.
Di

PAGE 84 — MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14)
 NOTES

om
t.c
en
m
ip
qu
-E
nt
ou
sc
Di

MRH601DS VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #0 (11/07/14) — PAGE 85
 OPERATION AND PARTS MANUAL

om
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING

t.c
United StateS
Multiquip Corporate Office MQ Parts Department
18910 Wilmington Ave. Tel. (800) 421-1244 800-427-1244 Fax: 800-672-7877

en
Carson, CA 90746 Fax (310) 537-3927 310-537-3700 Fax: 310-637-3284
Contact: mq@multiquip.com
Service Department Warranty Department
800-421-1244 Fax: 310-537-4259 800-421-1244 Fax: 310-943-2249
310-537-3700 310-537-3700

m
Technical Assistance
800-478-1244 Fax: 310-943-2238
Canada ip United Kingdom
Multiquip Multiquip (UK) Limited Head Office
4110 Industriel Boul. Tel: (450) 625-2244 Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Laval, Quebec, Canada H7L 6V3 Tel: (877) 963-4411 Globe Lane, Fax: 0161 339 3226
qu
Contact: jmartin@multiquip.com Fax: (450) 625-8664 Dukinfield, Cheshire SK16 4UJ
Contact: sales@multiquip.co.uk
-E
nt

© COPYRIGHT 2014, MULTIQUIP INC.

Multiquip Inc, the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.
ou

This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.

The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.

Your Local Dealer is:

sc
Di