MAINTENANCE

SOLUTIONS
 A trusted partner in manufacturing &
maintenance.
LOCTITE adhesives and sealants are engineered to meet a broad range of applications.
With our world-class, innovative product technologies and our extensive industry experience, Henkel can
help you optimize product performance and reduce overall costs.

GLOBAL CAPABILITIES DESIGN PARTNERSHIP

Our extensive network Our experienced engineers
can support your value provide outstanding design and
stream worldwide. application support.

PROCESS
OPTIMIZATION
Henkel has
WE’RE YOUR EXCEPTIONAL
TECHNICAL

PARTNER
SUPPORT
decades of
To help you
success optimizing
improve quality
manufacturing
processes.
EVERY STEP OF and efficiency.

THE WAY.

COST SAVINGS AND INNOVATION

RELIABILITY More than 30% of our
Our solutions can improve sales come from products
productivity, durability and launched in the past
reduce overall cost. five years.

SUSTAINABLE SOLUTIONS
We help create more value
for our customers by improving
sustainability and efficiency.

2 | Maintenance Solutions
TABLE OF CONTENTS
THREADLOCKING 4
Prevent fastener loosening and seizure

THREAD SEALING 6
Prevent leaks - air, hydraulic pipe joints

GASKETING 8
Prevent flange leaks - oil, transmission, coolant

RETAINING
Prevent backlash - Keyway wallow, spun bearings, shaft 10
misalignment, wear, corrosion

INSTANT BONDING 12
Bond dissimilar parts

METAL AND CONCRETE REPAIR 14

Repair and rebuild metal and concrete surface

PROTECTIVE COATINGS AND

COMPOUNDS 16
Protection against corrosion and wear of surfaces

ANTI-SEIZE LUBRICANTS
Prevent rust, corrosion, galling or seizing on metal parts 18
in extreme environments

CLEANING 20
Clean and degrease parts and work surfaces

ADDITIONAL PRODUCTS 22
Products for other key applications

NEW PRODUCTS 24
PROTECTION THROUGHOUT YOUR FACILITY 26
SOLUTIONS TO COMMON MAINTENANCE CHALLENGES 28
PRODUCT ORDERING INFORMATION 30
PROPERTIES CHART 31
Threadlocking
Locking of threaded fasteners

Are the parts already assembled?

Helpful Hints: Yes

• Clean parts with LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser before applying the adhesive.
• If the threadlocker will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N. Wicking – Green
• If the parts were in contact with aqueous washing solutions or cutting fluids that leave a protective layer on the
surface, wash with hot water before use.

HENKEL SOLUTIONS LOCTITE® 290

Fastener Size 1/16“ to 1/2" (M2 to M12)

Strength High

Cure Time (Fixture/Full Strength)* 20 min./24 hr.

Breakaway/Prevail Torque (N.m) 10/29

Temperature Resistance for Continuous Service 150°C

50 ml bottle - 531724
Package Size & IDH
250 ml bottle - 848069

* Typical value @ 22°C

Additional Products

Breakaway/
Strength/
Name Prevail Torque Features
Color
(N.m) Recommended for locking
pre-assembled fasteners,
Removable grade, i.e. instrumentation screws,
LOCTITE® 220 wicking, for small electrical connectors, and set
Low - Blue 9/19 threads of 1/4“ (M6) screws. Also seals porosities in
or smaller
welds and metal parts.

LOCTITE® 270 Fasteners up to 3/4"

High - Red 26/36 (M20)

LOCTITE® 271 Fasteners up to 1"

High - Red 28/31 (Up to M25)

LOCTITE® 272 High - High Temp up to

22/24
Orange 11/2" (M36)

Use LOCTITE® Primer to:

LOCTITE® Primers

1. Activate inactive surfaces.

2. Speed cure times for faster
return to service.
3. Speed curing through
larger gaps and deep
threads.
4.Substantially speed cure
times on cold parts.
5. Act as a cleaning agent.

4 | Maintenance Solutions
ƒƒ Prevents loosening from shock and vibration
ƒƒ Single component – clean and easy to apply
ƒƒ Can be used on various sizes of fasteners – reduces
inventory costs
ƒƒ fills gap between threads and unitizes the assembly
ƒƒ Stops rust and corrosion

No

What strength do you require?

Low – Purple Medium - Blue High – Red Permanent - Red

Oil tolerant

LOCTITE® 222 LOCTITE® 243 LOCTITE® 263 LOCTITE® 277

Up to 1/4" (Up to M6) 1/4“ to 3/4“ (M6 to M20) Up to 1“ For large bolts > 7/8“ (>20mm)

Low Medium High Permanent

10 min./24 hr. 10 min./24 hr. 10 min./24 hr. 60 min./24 hr.

6/3 20/7 32/32 31/31

150°C 180°C 180°C 150°C

10 ml bottle - 1427418
50 ml bottle - 848063 50 ml bottle - 1367282 50 ml bottle - 1367281 50 ml bottle - 531723
250 ml bottle - 848062 250 ml bottle - 531707 250 ml bottle - 1511183 250 ml bottle - 531722
1 litre bottle - 833788

Recommended for low strength With improved oil tolerance, Engineered to cure consistently High strength adhesive for
threadlocking of adjustment LOCTITE® 243 Threadlocker is on a variety of metals, despite locking and sealing large bolts
screws, countersunk head effective on all types of metal minor surface contaminants. and studs 1“ (25 mm) or larger in
screws, and set screws; on threaded fasteners. Prevents Works on steel, stainless steel diameter. Heat may be required
collars, pulleys, tool holders, and loosening on vibrating parts and most plated fasteners. to weaken bond before parts
controllers. Also for low strength such as pump, motor mounting Tolerates thread lubrication, anti- can be disassembled.
metals such as aluminum or bolts, gear boxes, or presses. corrosion and protection fluids.
brass. Removable with hand tools. Heat required for removal.

Package Size Primer is optional with:

Name Color Viscosity Base On-Part Life Dry Time & IDH Active surfaces: Brass, copper,
bronze, iron, soft steel, nickel.
30 to 70
7649 Primer N Clear/Green 2 Acetone 30 days 100 ml - 849297
seconds Primer is required with:
Inactive surfaces: Aluminum,
stainless steel, magnesium, zinc,
black oxide, cadmium, titanium,
Acetone/ 30 to 70
7471 Primer T Amber 2 7 days 100 ml - 849296 and others.
Isopropanol seconds

5 | Maintenance Solutions
Thread SEALING
Preventing gas and liquid leaks

Are the parts metal or plastic?

Helpful Hints: Plastic and/

• If the sealant (LOCTITE® 545 Thread Sealant, LOCTITE® 565 Thread Sealant, LOCTITE® 567 Thread Sealant, or or Metal
LOCTITE® 561 Pipe Sealant) will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N.
• All parts must be clean and dry before sealing - use LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser.

Cord

HENKEL SOLUTIONS LOCTITE® 55

Description Cord

Maximum Thread Size 4" (10.16 cm)

Temperature Resistance 150°C

Maximum Pressure Resistance (N/mm2)/Cure Time 10,000 psi (68.9)/instant

Substrate to be Sealed Metal, Plastic or Both

Instant Low Pressure Seal Yes

Package Size & IDH 150 metres - 1752446

Additional Products

Name Features

LOCTITE® 572 Easy application by hand. Slow curing. For use on construction pipe sealing.

LOCTITE® 545 Low strength, fast curing for hydraulic / Pneumatic fittings. Can be safely applied on metal
and plastic threaded fittings.
Potable water: NSF/ANSI 61 UL
Listed and Ceritified to CSA
International. **

6 | Maintenance Solutions
ƒƒ Liquids ensure complete contact between threads for a
100% seal
ƒƒ Liquids will not creep, shrink, shred or block systems
(including filters)
ƒƒ Disassembly can be achieved easily with basic hand tools
ƒƒ Replaces tapes and pastes

Metal parts

Are the threads fine or coarse?

Fine Coarse

LOCTITE® 542
LOCTITE® 565 LOCTITE® 567 LOCTITE® 577
(Hydraulic & Pneumatic)

Brown Liquid White to off White Paste White Paste Yellow Paste

Up to 3/4" (1.90 cm) Up to 2" (5.08 cm) 3“ (7.62 cm) Up to 3“ (7.62 cm)

150°C 150°C 250°C 180°C

10,000 psi (68.9)/24 hrs. 10,000 psi (68.9)/72 hrs. 10,000 psi (68.9)/72 hrs. 10,000 psi (68.9)/72 hrs.

Metal Metal Stainless Steel, Aluminum Metal

No Yes Yes No

50 ml bottle - 848735 50 ml bottle - 1751917 50 ml bottle - 2146962 50 ml tottle tube - 2121780

250 ml bottle - 848736 250 ml bottle - 1752552 250 ml bottle - 2146695 250 ml tottle tube - 2121367

Recommended for fine threaded A general-purpose instant Withstands temperatures to Medium strength, general
fittings as used in hydraulic and sealant for tapered and straight/ 204°C with excellent solvent purpose sealant for use on
pneumatic installations and tapered fittings. resistance. Locks and seals coarse, threaded components.
small fittings in general. Carries tapered pipe threads and
German DVGW approval fittings, including high pressure
(NG-5146 AR 0855) Meets BS applications. Disassembles with
6956 type A for sealing gas hand tools.
fittings. **

** All approvals are region specific. Please contact your Henkel Sales Representative for further information.

7 | Maintenance Solutions
gasketing
Sealing the flanges

Does the existing gasket need to be used as a shim?

Helpful Hints:
• If there are traces of old gasket left on the parts to be sealed, clean with
LOCTITE® SF 790 Chisel Gasket Remover.
• All parts must be clean and dry before sealing – use LOCTITE® SF 7070 ODC-
Free Cleaner and Degreaser.
• Anaerobic products cure between metal surfaces with the absence of air.

Rigid

HENKEL SOLUTIONS LOCTITE® 510 LOCTITE® 518

Color Pink Red

Gasket Type Formed-in-place Formed-in-place

Gap Fill 0.010" (0.25 mm) 0.010" (0.25 mm)

Cure Method Anaerobic Anaerobic

Fixture/Cure Time N.A./24 hrs. N.A./24 hrs.

Temperature Resistance
204°C/N.A. 150°C/N.A.
(Continuous/Intermittent)

Instant Seal Excellent Excellent

Water/Glycol Resistance Excellent Excellent

50 ml tottle tube - 848390 50 ml tottle tube - 2118119

Package Size & IDH 250 ml tottle tube - 848731 250 ml tottle tube - 2118117
300 ml cartridge - 910888 250 ml cartridge - 2136699

Additional Products

Name Features

LOCTITE® 515 Gasket For flexible applications.

Cure speed: Unprimed - 1 to 12 hours.
Eliminator Flange Sealant Primed - 15 minutes to 2 hours.

LOCTITE® 790 Chisel Solvent. Dry time: Leave on surface for 5 to

Gasket Remover 10 minutes. Wipe/scrape clean.
High temperature. Product has Recommended for use on rigid
Designed for high temperature resistance a temperature range to 204°C iron, steel and aluminum flanges.
LOCTITE® SI 5920 and electrical insulating applications. with excellent solvent Spray LOCTITE® SF 7649 Primer N
Temperature resistance upto 360°C. and chemical resistance. Makes on only one surface.
or dresses gaskets in rigid
assemblies. Eliminates gasket
compression set.

8 | Maintenance Solutions
ƒƒ No shimming effect – controlled tolerances, no need
for re-torquing
ƒƒ Fill all voids – reduce the need for a fine surface finish
of flanges
ƒƒ Parts can be disassembled easily even after extended
service
ƒƒ Resists high pressure when fully cured

No

Are you sealing a rigid or a stamped flange?

Stamped

LOCTITE® 574 LOCTITE® SI 587 LOCTITE® SI 596 LOCTITE® SI 5900

Red Blue Red Black

Formed-in-place Formed-in-place Formed-in-place Formed-in-place

0.010“ (0.25 mm) 0.250" (6.35 mm) 0.250" (6.35 mm) 0.240" (6 mm)

Anaerobic Moisture (RTV) Moisture (RTV) Moisture (RTV)

N.A./24 hrs. 50 min. (Skin formation) 50 min. (Skin formation) 20 min. (Skin formation)

150°C/N.A. 204°C/250°C 316°C 204°C/N.A.

Excellent Excellent Excellent Excellent

Excellent Excellent Excellent Excellent

50 ml tottle tube - 848739 95 g tube - 1266356

300 ml cartridge - 317667 300 ml cartridge - 1257126
250 ml tottle tube - 848734 300 ml cartridge - 1246389

Recommended for sealing rigid All types of flanges including High temperature silicone Superior flexibility, withstand
& semi-rigid metal flanges. Fast stamped sheet metal. Designed sealant makes the repair of high relative joint movement.
curing. Gives instant sealing. for superior bonding properties industrial furnaces, ovens, High adhesion, gives instant seal.
to oil contaminated metals. boilers, exhaust stacks, high Low odor, Low volaticity, Non-
temperature stacks, ducting corrosive.
and heating elements.

9 | Maintenance Solutions
RETAINING
Securing cylindrical assemblies

Is the assembly badly worn?

Yes - Gaps up to
Helpful Hints:
• If the retaining compound will be applied below 5°C, pre-treat with LOCTITE® 7649 Primer N. 0.020" (0.5 mm)
• All parts must be clean and dry before sealing – use LOCTITE® SF 7070 ODC-Free Cleaner and Degreaser.
• If the parts have been in contact with washing or cutting fluids containing nitrates, wash with hot water.

HENKEL SOLUTIONS LOCTITE® 660

Strength Required High

Shear Strength (N/mm2) 3,335 psi (23)

Diametrical Clearance Up to 0.020" (0.5 mm)

Temperature Resistance 150°C

Cure Time (Setup/Full Strength) 20 min./24 hr.

Package Size & IDH 50 ml bottle - 1752417

Additional Products

Name Features

Gives best resistance to dynamic, axial and radial loads. Recommended for
LOCTITE® 680
retaining shafts, gears, pulleys, and similar cylindrical parts.

LOCTITE® 620 Particularly suitable for applications where temperature resistance up to 200°C
is required. Requires heat cure to achieve temperature resistance. Used for repairing worn coaxial
parts without remachining;
For close-fitting parts (gap up to 0.1 mm) with light contamination. Typical enables reuse of worn bearing
LOCTITE® 603 applications include retaining roller bearings or oil impregnated bushings into seats, keys, splines, tapers, or for
housings. retaining shims.

10 | Maintenance Solutions
ƒƒ Bond non-threaded cylindrical metal assemblies
ƒƒ High and moderate strength products – can carry high
loads and eliminate fretting
ƒƒ Fill all voids – prevent corrosion
ƒƒ Reduce the need for close tolerances
ƒƒ 100% contact – load and stress are distributed evenly
over the joint

No - Gaps to 0.015" (0.25 mm)

Do you require low, medium or high strength?

Low Strength Medium Strength High Strength

High Viscosity Low Viscosity

LOCTITE® 641 LOCTITE® 609 LOCTITE® 638 LOCTITE® 648

Low Medium High High

1,700 psi (11.7) 2,300 psi (15.8) 4,200 psi (29) 4,480 psi (31)

Up to 0.006'' (0.15 mm) Up to 0.005" (0.1 mm) Up to 0.01" (0.25 mm) Up to 0.006" (0.15 mm)

150°C 150°C 180°C 180°C

20 min./24 hr. 10 min./24 hr. 15 min./24 hr. 10 min./24 hr.

50 ml bottle - 848752 50 ml bottle - 848744 50 ml bottle - 1865160 50 ml bottle - 1865163

250 ml bottle - 848750 250 ml bottle - 848745 250 ml bottle - 1865048 250 ml bottle - 1865164

A controlled strength retaining Recommended for parts Maximum strength. For use Press Fit/High Strength/Rapid
compound that is ideal for that will need subsequent where high dynamic force or Cure. Offers high temperature
cylindrical parts that require dismantling, i.e. retention of cyclic loading is expected. Offers performance and oil tolerance.
disassembly. bearings onto shafts and into high temperature performance
housings. and oil tolerance.

11 | Maintenance Solutions
INSTANT BONDING
Fast and reliable bonding

What is the bonding application requirement?

Porous / absorbent material

HENKEL SOLUTIONS LOCTITE® 401

Fixture Time 15 sec.

Gap Fill (mm) 0.12

Temperature Resistance 120°C

2
Shear Strength, psi (N/mm ) 3200 (22)

Viscosity (cP) 110

20 g bottle - 1669715
Package Size & IDH
1 litre bottle - 833784

Additional Products

Name Features Gap Fill (mm)

LOCTITE® 480 Suitable for close-fitting parts 0.15

LOCTITE® 430 Metal bonder for close fitting parts 0.12

LOCTITE® 420 Wicking type plastic bonder 0.05

Surface insensitive instant

adhesive for difficult-to-bond,
porous surfaces such as wood,
paper, leather or fabric.

12 | Maintenance Solutions
ƒƒ assemble parts quickly and easily
ƒƒ pepair broken parts
ƒƒ bond dissimilar parts

Bonding rubber, plastic, metal - instant bonding

Plastics / Rubber (EPDM) Metal parts General Purpose

LOCTITE® 454 LOCTITE® 406 LOCTITE® 415 LOCTITE® 495

15 sec. 15 sec. 30 sec. 20 sec.

0.25 0.10 0.20 0.10

120°C 120°C 80°C 120°C

3200 (22) 3200 (22) 3600 (25) 2750 (19)

Gel 20 1500 45

20 g bottle - 1752383 20 g bottle - 848003

20 g bottle - 1669713 20 g bottle - 1669711
300 g cartridge - 88525 500 gm bottle - 849230

Surface insensitive gel. Bonds Particularly suited for bonding High viscocity adhesive A general purpose adhesive
porous & absorbent surfaces. rubbers & plastics. A must offering maximum adhesion designed to bond rubber,
Non-dripping, particularly for every tool box for general to metals. Ideal for bonding metal & plastic parts.
suited for overhead maintenance & repair. Makes small metal parts for general
applications. O-rings instantly. Wicking maintenance.
viscosity for tight bond lines.

13 | Maintenance Solutions
METAL AND CONCRETE
REPAIR
Repairing, filling and rebuilding all metal and concrete surfaces
what material are you repairing or rebuilding?

Steel

High compressive
Kneadable Putty
strength

LOCTITE® EA 3463 LOCTITE® EA 3478 LOCTITE® EA 3471

HENKEL SOLUTIONS Metal Magic SteelTM Stick Superior Metal Steel Putty

Description 2K-Epoxy 2K-Epoxy 2K-Epoxy

Mix ratio by volume/weight N/A 4:1 / 7.25:1 2.5:1 / 6.25:1

Working life 2.5 - 5 min. 20 min. 30 min.

Fixture time / Cure time 10 min. 6h 6h

Shear strength (GBMS) ≥ 3.45 N/mm² 17 N/mm2 9.6 N/mm2

Compressive strength 83 N/mm2 125 N/mm2 61.7 N/mm2

Service temperature range (Dry) -30ºC to +120ºC -29ºC to +120ºC -30ºC to +105ºC

Coverage @ 6mm thickness* 45cm2 232cm2 278cm2

1 lb - 1752406
Package Size & IDH 4 oz - 1752399 1kg - 680035
1 lb - 1752434

*As mentioned in product technical data sheet

• Emergency sealing of • Rebuilding keyways • Seal cracks in tanks,

leaks in pipes and tanks and spline assemblies castings, vessels and
• Smoothes welds • Rebuilding of bearings, valves
• Repairs small cracks in clamp connections, • Patch non-structural
castings tensioning elements, defects in steel casings
gear wheels or bearing • Resurface worn air
Sets in 10 minutes.
seats seals
Steel filled kneadable
• Repair pitting caused
stick. Adheres to damp Ferro-silicon filled
by cavitation and/or
surfaces and cures with outstanding
corrosion
under water. Chemical compression strength.
and corrosion resistant. Ideal for renewing General-purpose
Can be drilled, filed and surfaces subjected to steelfilled, non-sagging
painted. compression, thrust, 2KEpoxy. Used to rebuild
ANSI/NSF Standard impact and harsh worn metal parts.
61** environments.

14 | Maintenance Solutions
ƒƒ high compressive strength
ƒƒ metals can be machined, drilled or tapped after cure
ƒƒ excellent resistance to aggressive chemicals

Aluminium Concrete Metal

High temperature
Fast cure putty Reliable and long lasting concrete repairs Wear resistance
resistance

LOCTITE® PC 3473 LOCTITE® EA 3479 LOCTITE® PC 9410 LOCTITE® PC 9416 LOCTITE® PC 7222
Fast Steel Putty Metal Set HTA Magna Crete Floor Fill Wear Resistant Putty

2K Magnesium Phosphate
2K-Epoxy 2K-Epoxy 3K-Epoxy 2K-Epoxy
System

1:1 / 100:56.5 1:1 / 1:1 Refer to TDS 4.6:1:9.8 / 16:3.2:80.8 2:1 / 2:1

3 min. 40 min. 5 to 20 min. 40 to 60 min. 30 min.

10 min. 12 h 1-2 h 24 h 6h

15 N/mm2 20 N/mm2 - - 16.8 N/mm2

51 N/mm2 90 N/mm2 90 N/mm² 90 N/mm² 72 N/mm2

-30ºC to +95ºC -20ºC to +190ºC -50ºC to +1,100ºC -30ºC to +110ºC -30ºC to +105ºC

370cm2 - 52m2 532in3 342cm2

5kg - 680838
500g can - 680036 500g - 1752395 5 gal - 235573 500g - 679971
20kg - 1400736

• Repair holes in tanks, • Rebuilding and • Repair / rebuild of • Three component • Ideal for filling pits and
leaks in pipes and repairing worn ramps and loading chemically resistant other irregularities in
elbows metal parts in high areas, support beam product metal surfaces
• Renew stripped threads operating temperature and footer repairs, • Bonds to almost any • Used in pipes, pumps
• Rebuild worn steel applications bridge decking and clean substrate elbows, transitions,
parts supports, concrete • Self-leveling butterfly valves,
A non-sagging, heavily
bunds and walls etc. • Very high compressive deflection plates,
Fast curing, steel filled, reinforced, aluminium
strength turbine blades and
non-sagging. Ideal powder filled 2K-Epoxy. Two-component, rapid
• Can withstand impact tanks
for emergency repair Easily mixed and setting concrete repair
load
and repairing worn moulded to form odd and grouting system
Contains ceramic fibers,
metal parts to prevent shapes if required. designed for making A non-shrinking 100%
giving this trowelable
downtime. Cures to a nonrusting, reliable, long lasting solids epoxy based
putty excellent wear
aluminium-like finish. repairs. Bonds to system for repairing
and abrasion resistance
concrete, wood, glass, holes in floors, spalled
with a smooth, low
steel and construction areas, ramps, stairs,
friction finish. Used in
materials. Can be mixed cracks in floors and
applications with an
and applied from -25°C for use in grouting
operating range of -30°C
to 45°C. applications.
to 105°C.

** All approvals are region specific. Please contact your Henkel Sales Representative for further information.

15 | Maintenance Solutions
PROTECTIVE COATINGS
AND COMPOUNDS
For superior protection from environmental impact
What type of coating do you require?

Wear Resistant

Impact Resistance Shallow Wear

LOCTITE® MR Flex 80™ Putty LOCTITE® PC 7333

HENKEL SOLUTIONS Pourable Repair Compound Brushable Ceramic

Colour Black Dark grey

Service temperature range (dry) -29ºC to +82ºC -29ºC to +120ºC

Mix ratio by volume (A:B) 2.5:1 2.75:1

Mix ratio by weight (A:B) 2.6:1 4.8:1

Working time 10 min. 30 min.

Cure time 8h 6h

Recommended total layer thickness NA min. 0.5 mm

Package Size & IDH 1lb - 1752404 1kg - 680038

Additional Products

Name Features

LOCTITE® PC 7339 Recommended for any application

Ultra High that requires protection from fine
Temperature particle abrasion under dry service
Pneu Wear temperatures of upto 288°C.

A ceramic reinforced epoxy that

It is ideal for repairing metal, Brushable ceramic filled two-part
LOCTITE® PC 7234 provides high gloss, low friction
rubber, and urethane surfaces epoxy for
High Temperature coating designed to protect against
that are subject to wear and • Impellers, butterfly valves
Brushable Ceramic turbulence and abrasion under dry
impact. Typical applications • Pump housings
service temperatures of up to 288°C.
include pump liners, pulleys, • Cyclones
conveyor belts, rubber and • Lining tanks
LOCTITE® PC 9340 To protect equipment against urethane parts or sheeting, and
High Temperature extreme corrosion caused by couplings.
Chemical Resistant chemical exposure under dry service
Coating temperatures of upto 210°C.

16 | Maintenance Solutions
ƒƒ Eliminates and breaks corrosion / erosion cycle
ƒƒ High compressive strength
ƒƒ Broad range tailored to specific applications

corrosion resistant

Deep Wear

LOCTITE® PC 7218 LOCTITE® PC 7226 LOCTITE® PC 7320 LOCTITE® PC 7319

Wearing Compound Pneu Wear Flexible Structural Coating Chemical Resistant Coating

Grey Grey Grey, Blue, Green Grey, Blue, Green

-30ºC to +120ºC -30ºC to +120ºC + 5ºC to +90ºC -30ºC to +120ºC

2:1 4:1 1:1 2.3:1

2:1 4:1 1:1 3.4:1

30 min. 30 min. 50 min. 30 min.

7h 6h 4h 16 h

min. 6 mm min. 6 mm min. 0.5 mm min. 0.5 mm

5kg - 885175
2kg - 680839 2kg - 1751940 Grey 20kg - 1073830
20kg - 2084171
10kg - 1402022 10kg - 1751941 Green 20kg - 1678823
Blue 20kg - 1678824

Two-part ceramic filled epoxy Ceramic filled two-part epoxy Solvent free flexible epoxy Forms glossy, low friction
for for coating for surface that protects
• Cyclone and separator • Dredge pump liners • Pipes equipment against extreme
bodies • Flumes and troughs • Trenches corrosion caused by chemical
• Dust collectors and • Pump impellers • Tanks exposure.
exhausters • Vibrating feeders • Concrete structure
• Pump liners and impellers • Chutes/hoppers • Metal structure
• Fan blades and housings • Equipment foundation
• Chutes and hoppers
• Elbows and transition points

17 | Maintenance Solutions
ANTI-SEIZE LUBRICANTS
For protection against rust, corrosion, seizing and galling

What type of Anti-Seize do you require?

Up to 871°C

LOCTITE® LB 8150
HENKEL SOLUTIONS Silver Grade Anti-Seize

Color Silver

Solid Lubricating Agent Graphite/Aluminum

Torque Coefficient* 0.18

Temperature Range -30°C to +900°C

Metal-Free No

Package Size & IDH 500 g jar - 833783

* K value on steel nuts and bolts

Additional Products

Name Max Temp Features

LOCTITE® LB 8700 Extreme Pressure

399˚C MOS2 based thread lubricant
Resistant Lubricant

Recommended for maximum lubricity at low speeds, high loads,

LOCTITE® LB 8012 Low Friction Lubricant 399˚C
Metal free formulation
Heavy duty, temperature
resistant, petroleum
based lubricant
compound fortified with
graphite and metallic
flake. Inert and will not
evaporate or harden in
extreme cold or heat.
For use in assemblies up
to 871°C. ABS Approved.
Tested to Mil-PRF-907E.
CFIA Approved. **

18 | Maintenance Solutions
 ƒƒ Provide lubrication in extreme environments

metal-free Incidental Water

General Purpose
Application Food Contact Resistant

Up to 982°C Up to 1315°C

No No No
l l l
Meta Meta Meta
LOCTITE LB 8008
®
LOCTITE® LB 8023
LOCTITE® LB 771 LOCTITE® LB 8009 LOCTITE® LB 8014
C5-A Marine Grade
Nickel Anti-Seize Heavy Duty Anti-Seize Food Grade Anti-Seize
Copper Anti-Seize Anti-Seize

Copper Silver Black White Black

Graphite/Calcium
Copper/Graphite Nickel/Graphite White Lubricating Solids Calcium Sulfonate
Fluoride

0.16 0.13 0.16 0.13 0.18

-29°C to +982°C -29°C to +1,315°C -29°C to +1,315°C -29°C to +399°C -29°C to +1,315°C

No No Yes Yes Yes

1 lb - 1751851 8 oz - 299175
1 lb - 1751842 1 lb - 1751839 2 lb - 1751942
2 lb - 1751889 16 oz - 1752448

Exclusive formula Copper-free. Metal free. Prevents seizure, galling, Formulated to protect
suspends copper and Recommended for Excellent lubricity. and friction in stainless assemblies exposed
graphite in a high quality stainless steel and Provides outstanding steel and other metal directly or indirectly to
grease. Protects metal other metal fittings. For lubrication to all metal parts up to 399°C. NSF fresh and salt water,
parts from rust, preventing corrosion, including stainless steel, H1 rated for incidental this anti-seize works
corrosion, galling, and seizing, and galling aluminum and soft food contact. ** especially well in high
seizing at temperatures in harsh, chemical metals up to 1315°C. humidity conditions. It has
to 982°C. Tested to environments, and excellent lubricity, superior
Mil-PRF-907E. CFIA temperatures to 1315°C. water washout spray
Approved. ** ABS Approved. ** resistance, and prevents
galvanic corrosion. ABS
Approved.**

** All approvals are region specific. Please contact your Henkel Sales Representative for further information.

19 | Maintenance Solutions
CLEANING
Clean and degrease work surfaces, parts and hands

what type of cleaner do you require?

general
purpose

HENKEL SOLUTIONS LOCTITE® SF 7061

KB Values N.A.

Package Size & IDH 100 ml can - 849292

Solvent based (acetone)

general parts cleaner,
evaporates very fast,
removing dirt, resins, lacquer,
oils and greases from metals.
Recommended for pre
assembly cleaning.

20 | Maintenance Solutions
Gasket Removing BIODEGRADABLE degreaser

LOCTITE® SF 7840 LOCTITE® SF 7070

LOCTITE® SF 790 LOCTITE® SF 7611
Natural Blue Biodegradable ODC-Free Cleaner &
Chisel Gasket Remover Pro Strength Parts Cleaner
Cleaner & Degreaser Degreaser

Greater than 200 N.A. 34 132

510 g aerosol can - 1751840 5 litre bottle - 789065 150 g bottle - 1423361
19 oz aerosol can - 1752427
510 g bottle - 1409698 20 litre bucket - 789705 425 g bottle - 1423327

Removes gaskets from any type Biodegradable, all-purpose, A non-aqueous, hydrocarbon- Aggressively penetrates,
of assembly in 10 to 15 minutes. industrial strength, based solvent designed for dissolves, and removes oil and
Prepares metal parts for new concentrated cleaner and cleaning and degreasing grease from parts. Dries quickly
gaskets, eliminating scraping degreaser. Can be economically surfaces to be bonded with with no residue. Contains no
and sanding. Works on wood; diluted with water. Formulated adhesives, as well as for general ODCs.
non-corrosive on aluminum. Not for wipe down, pressure purpose industrial cleaning.
for use with plastics, Linoleum, spraying, ad immersion cleaing Safe on aluminum, rubber, and
or synthetic fibers. processes at room temperature most plastics, and will not cause
or heated. Non-flammable and flash rusting on water-sensitive
non-toxic. Contains no ODCs. parts. Dries residue-free.
Contains no ozone-depleting
compounds (ODCs).

21 | Maintenance Solutions
ADDITIONAL PRODUCTS

BELT & RUBBER REPAIR

LOCTITE® PC 7393 LOCTITE® MR Flex 80 Loctite® MR Flex 80

Rapid Rubber Repair Kit Pourable Repair Compound Putty

Color - Black Black Black

2 2
Tensile strength - 9 N/mm 12.5 N/mm 10 N/mm2

Working time - 1 min. 20 min. 10 mins.

Functional cure - 2 hrs. 8 hrs. 8 hrs.

GROUTING & CHOCKING

LOCTITE® PC 9435 LOCTITE® PC 9626 Loctite® PC 9458

Marine Chocking Deep Pour Grout Fast Set Grout

Maximum temperature - 120°C 105°C 93°C

2 2
Compressive strength - 150 N/mm 100 N/mm 100 N/mm2

Working time - 10 mins. 30 mins. 10 min.

Full cure - 24 hrs. 24 hrs. 12 hrs.

PROTECTIVE COATINGS

LOCTITE® PC 9660 LOCTITE® SF F720RD LOCTITE® SF 7693

Maxicoat Color Guard Cold Galvanizing Compound

Description - Waxy Film Rubber Coating Zinc Spray

Color - Brown Red Grey

Temperature range - Up to 93°C Up to 93°C Up to 204°C

Cure/Dry time - N.A. 4 hrs. 15 mins.

22 | Maintenance Solutions
ƒƒ belt & rubber repair
ƒƒ grouting & chocking
ƒƒ rust treatment
ƒƒ specialty lubricants
ƒƒ emergency repair
ƒƒ protective coatings

RUSTED / SEIZED FASTENER LOOSENING

LOCTITE® LB 100 LOCTITE® LB 8711 LOCTITE® LB 8040

Maintain Penetrating Oil Freeze and Release

Description - Temporary rust loosener Petroleum based lubricant Mineral oil lubricant

Color - Clear liquid Pale Yellow Amber

Temperature range - NA 38°C -20°C to +45°C

EMERGENCY REPAIR

LOCTITE® 5070 LOCTITE® LOCTITE®

Pipe Repair Kit Transformer Repair Kit O-Ring Kit

Description - Epoxy Epoxy, silicone, cleaner Cyanoacrylate

Components - Yellow impregnated tape LOCTITE® EA 3473, LOCTITE® EA 3463, Buna N cord and
and LOCTITE® EA 3463 LOCTITE® 587 Blue Maxx LOCTITE® 406

Repair time - 30 mins. NA 15 sec.

RUST TREATMENT

LOCTITE® SF 7625 LOCTITE® SF 7600

Rust Treatment Rust Converter

Description - Rust Converter Rust Converter

Color - Matte Black Grey

Temperature range - Up to 121°C NA

Cure/Dry time - 30 mins. NA

23 | Maintenance Solutions
LOCTITE® Composite Repair System

ADD ANOTHER 20 YEARS

LOCTITE® Composite Repair System is a fast and economical alternative to pipe replacement.
The innovative repair system reinforces and seals pipes designed for high pressure, temperature and chemical resistance.
It is fully certified by DNV GL according to ISO/TS 24817.

APPLICATION AREAS BENEFITS

¡ Repair system for steel pipes, pipelines and tanks ¡ Fast and economical repair solution
¡ For inside and outside corrosion ¡ Increase pipe lifetime by up to 20 years
¡ Equipment subject to chemical attack or mechanical wear ¡ No need to replace pipes
¡ Complex geometries: bends, tees, reducers and flanges ¡ In situ repair without interruption of operations
¡ Oil & Gas industry, refineries and petrochemical plants, power plants, ¡ Tailor-made repair solutions including specific calculations of
water utilities etc. repair designs
¡ Certified applicator and installer training program

The all-in-one solution with materials for surface

preparation, reinforcement and topcoat consists of :
LOCTITE® Composite Repair System
¡ Loctite® PC 7255 Sprayable Ceramic
¡ Loctite® EA 3478 Superior Metal
¡ Loctite® PC 7210 Hand Lay-Up Resin
¡ Loctite® PC 5085 Glass-Carbon Fiber Tape
¡ Loctite® SF 7515 Corrosion Inhibitor

24 | Maintenance Solutions
Loctite® PC 7000
High Temperature Abrasion Resistant Coating

UPTO 2X PROTECTION
Loctite® PC 7000 High Temperature Abrasion Resistant Coating is a unique three component, rapid setting silica based
composite coating system which offers protection from abrasion up to 11000C. This is a water based environmentally friendly
system. It bonds well to porous substrates like concrete, refractory bricks etc. (Metal surfaces need to be reinforced with
metallic mesh before coating application.)

APPLICATION AREAS BENEFITS

¡ Coal burner nozzles ¡ Upto 2 X protection from high temperature abrasion
¡ Baffle plates of coal tip burners ¡ Cost effective: Better life, more efficiency
¡ Refractory brick structure of chimneys ¡ Laminar flow of coal - air mixture for optimum efficiency

APPLICATION PROCEDURE
¡ Prepare the application surface by proper surface preparation-(Grid blasting/Grinding). After surface preparation ensure the surface is clean
and free from dust, etc.
¡ Spot weld S.S diamond pattern wire mesh over the work piece as per the application requirement.
¡ Add part a and b to the container. Mix till uniform consistency and milky white color.
¡ Add ceramic fillers incrementally to liquid resin while mixing vigorously with air mixer for 2-3 mins until fillers are dispersed evenly. Use the
entire qty of part a:part b:filler mix it well to prepare the homogenous mixture. No part mixing is allowed.
¡ Apply fully mixed material to prepared surface within 30 mins of mixing. Ensure 100% filling in mesh as per the required application thickness.
¡ Allow coating to cure at room temperature for 24 hrs. After room temperature cure, heat cure @ 3500C for 10 mins.

Burner tip: after wear Burner tip coated with Burner Tip Wear
Loctite® PC 7000 HTARC: after wear after 1 Year of PC 7000 Application

25 | Maintenance Solutions
protection throughout
your facility

26 | Maintenance Solutions
ƒƒ For every industry, loctite solutions will help repair, rebuild
and protect your valuables assets.

27 | Maintenance Solutions
SOLUTIONS TO COMMON
MAINTENANCE CHALLENGES
THREADLOCKING

Traditional Method Problem LOCTITE® Solution

LOCKNUTS • Double cost. • Locks single nut.

• Requires extra space. • Uses standard parts.
• Corrodes in place. • Seals against corrosion.
• Time consuming to assemble. • Fast assembly.

SPRING WASHERS • Not an effective locking system. • Completely vibration proof.

• Can damage contact faces. • No damage, No corrosion.
• Large inventory. • One bottle size for all size threads.

NYLON INSERTS • On-torque needed. • Low on-torque.

• Ineffective under severe vibration. • Effective on adverse conditions.
• Requires good access. • Easy to apply.
• Should not be re-used. • Allows parts to be re-used.
TAB WASHERS / SPLIT • Difficult production use. • Apply manually or automatically.
PINS • Expensive. • Uses standard parts.
• Special design required.

THREAD SEALING

Traditional Method Problem LOCTITE® Solution

TAPES • Shredding clogs pipes. • Unused sealant flushed away.

• Manual application only. • Automation possible.
• Elbow alignment. • Seals/locks in any position.
• Overtightening causes damage. • Vibration proof.
• Poor vibration resistance.
PASTES • Creeping/shrinkage. • Sealed for life.
• Poor chemical resistance. • Resists most solvents.
• Poor vibration resistance. • Vibration proof.

'O' RINGS • Large inventory needed. • Universal products.

• Easily damaged. • No parts to handle.
• Special joint design. • Uses standard parts.

CONE FITTINGS • Costly machining. • Use standard parts.

• Easily damaged. • Use with damaged cone fitting to ensure
complete seal.

28 | Maintenance Solutions
ƒƒ LOCTITE® engineering adhesives and sealants are designed
to offer you more reliability and cost-savings over
conventional MAINTENANCE methods

GASKETING

Traditional Method Problem LOCTITE® Solution

PRE-FORMED MATERIALS • Relaxation. • Constant seal / no re-torquing.

• Re-torquing. • Total seal.
• Corrosion/fretting. • Automation possible.
• Manual application.
• Large inventory.
'O' RINGS • Manual application. • Automation possible.
• Extra machining operation. • Standard parts used.
• Large inventory. • No parts to handle.
• Low inventory
SEALING COMPOUNDS • Often solvent based. • Solvent-free.
• Can cause clogging. • Unused adhesive flushed away.
• Re-torquing. • No relaxation.
• Messy. • Accurate application.
CUTTING PAPER GASKETS • Time consuming. • Little preparation.
• Operator skill. • Easy to apply.
• Inconsistent performance. • Constant performance.

RETAINING

Traditional Method Problem LOCTITE® Solution

PRESS FIT • High stress. • Load spread over joint.

• Fretting possible. • Can use lighter parts.
• Assembly equipment required. • Hand assembly possible.
• Relaxed tolerances.
GRUB SCREWS • Poor metal to metal contact. • 100% contact.
• Low torque transmission. • Total surface contact creates high torque
• Extra machining. capability.
• Basic machining.
KEYS • Prone to backlash and chattering. • No movement/fretting eliminated.
• Costly to produce. • One adhesive suits many applications.
• Accurate machining. • Allows relaxed tolerances.

SPLINES • Costly machining. • Basic machining

• Special design • Normal parts.
• Prone to wear. • No movement / fretting.

PINS • High stress concentration. • Distributed stress.

• Prone to backlash. • No movement / fretting.
• Costly machining. • No extra work.

29 | Maintenance Solutions
PRODUCT ORDERING
INFORMATION
Product Name IDH No. Pkg. Size Page Product Name IDH No. Pkg. Size Page
LOCTITE 222 THREADLOCKER 848062 250 ml bottle 5 LOCTITE PC 9410 MAGNA CRETE 235573 5 gal 15

LOCTITE 222 THREADLOCKER 848063 50 ml bottle 5 LOCTITE PC 9416 FLOOR FILL 680838 5 kg 15

LOCTITE 243 THREADLOCKER 531707 250 ml bottle 5 LOCTITE PC 9416 FLOOR FILL 1400736 20 kg 15

LOCTITE 243 THREADLOCKER 1367282 50 ml bottle 5 LOCTITE PC 7222 WEAR RESISTANT PUTTY 679971 500 g 15

LOCTITE 243 THREADLOCKER 1427418 10 ml bottle 5 LOCTITE MR FLEX 80 PUTTY 1752404 1 lb 16

LOCTITE 243 THREADLOCKER 833788 1 litre bottle 5 LOCTITE PC 7333 BRUSHABLE CERAMIC 680038 1 kg 16

LOCTITE 263 THREADLOCKER 1511183 250 ml bottle 5 LOCTITE PC 7218 WEARING COMPOUND 680839 2 kg 17

LOCTITE 263 THREADLOCKER 1367281 50 ml bottle 5 LOCTITE PC 7218 WEARING COMPOUND 1402022 10 kg 17

LOCTITE 277 THREADLOCKER 531722 250 ml bottle 5 LOCTITE PC 7226 PNEU WEAR 1751940 2 kg 17

LOCTITE 277 THREADLOCKER 531723 50 ml bottle 5 LOCTITE PC 7226 PNEU WEAR 1751941 10 kg 17

LOCTITE 290 THREADLOCKER 848069 250 ml bottle 4 LOCTITE PC 7320 FLEXIBLE STRUCTURAL COATING 2084171 20 kg 17

LOCTITE 290 THREADLOCKER 531724 50 ml bottle 4 LOCTITE PC 7319 CHEMICAL RESISTANT COATING 1678824 20 kg 17

LOCTITE 401 INSTANT ADHESIVE 1669715 20g bottle 12 LOCTITE LB 771 NICKEL ANTI-SEIZE 1751839 1 lb 19

LOCTITE 401 INSTANT ADHESIVE 833784 1litre bottle 12 LOCTITE LB 8008 C5-A COPPER ANTI-SEIZE 1751842 1 lb 19

LOCTITE 406 INSTANT ADHESIVE 1669713 20g bottle 13 LOCTITE LB 8009 HEAVY DUTY ANTI-SEIZE 1751851 1 lb 19

LOCTITE 415 INSTANT ADHESIVE 848003 20g bottle 13 LOCTITE LB 8009 HEAVY DUTY ANTI-SEIZE 1751889 2 lb 19

LOCTITE 415 INSTANT ADHESIVE 849230 500gm bottle 13 LOCTITE LB 8014 FOODGRADE ANTI-SEIZE 1751942 2 lb 19

LOCTITE 454 INSTANT ADHESIVE 1752383 20g bottle 13 LOCTITE LB 8023 MARINE GRADE ANTI-SEIZE 1752448 16 oz 19

LOCTITE 454 INSTANT ADHESIVE 88525 300g cartridge 13 LOCTITE LB 8150 SILVER ANTI-SEIZE 833783 500g jar 18

LOCTITE 495 INSTANT ADHESIVE 1669711 20g bottle 13 LOCTITE SF 7061 SURFACE CLEANER 849292 100ml aerosol can 20

LOCTITE 510 FLANGE SEALANT 910888 300ml cartridge 8 LOCTITE SF 7070 ODC-FREE CLEANER AND DEGREASER 1423361 150g bottle 21

LOCTITE 510 FLANGE SEALANT 848731 250ml tottle tube 8 LOCTITE SF 7070 ODC-FREE CLEANER AND DEGREASER 1423327 425g bottle 21

LOCTITE 510 FLANGE SEALANT 848390 50ml tottle tube 8 LOCTITE SF 7611 PRO STRENGTH PARTS CLEANER 1752427 19 oz aerosol can 21

LOCTITE 518 FLANGE SEALANT 2118117 250ml tottle tube 8 LOCTITE SF 7840 NATURAL BLUE 789705 20litre bucket 21

LOCTITE 518 FLANGE SEALANT 2118119 50ml tottle tube 8 LOCTITE SF 7840 NATURAL BLUE 789065 5litre bottle 21

LOCTITE 542 THREAD SEALANT 848736 250 ml bottle 7 LOCTITE SF 790 CHISEL GASKET REMOVER 1751840 510g aerosol can 21

LOCTITE 542 THREAD SEALANT 848735 50 ml bottle 7 LOCTITE SF 790 CHISEL GASKET REMOVER 1409698 510g bottle 21

LOCTITE 55 PIPE SEALING CORD 1752446 150 metres 6 LOCTITE SI 587 BLUE 1266356 95g tube 9

LOCTITE 565 THREAD SEALANT 1752552 250 ml bottle 7 LOCTITE SI 587 1246389 300ml cartridge 9

LOCTITE 565 THREAD SEALANT 1751917 50 ml bottle 7 LOCTITE SI 5900 1257126 300ml cartridge 9

LOCTITE 567 THREAD SEALANT 1752545 250 ml bottle 7 LOCTITE SI 596 HIGH TEMP RED SILICONE 317667 300ml cartridge 9

LOCTITE 567 THREAD SEALANT 1752537 50 ml bottle 7 LOCTITE PC 7393 RAPID RUBBER 1752457 400ml 22

LOCTITE 574 FLANGE SEALANT 848734 250ml tottle tube 9 LOCTITE MR 5000 RAPID RUBBER REPAIR KIT 1752458 400ml 22

LOCTITE 574 FLANGE SEALANT 848739 50ml tottle tube 9 LOCTITE MR FLEX 80 PUTTY 1752404 1 lb 22

LOCTITE 577 THREAD SEALANT 2121367 250 ml tottle tube 7 LOCTITE PC 9435 MARINE CHOCKING 1422843 3.4kg 22

LOCTITE 577 THREAD SEALANT 2121780 50 ml tottle tube 7 LOCTITE PC 9626 DEEP POUR GROUT 1752439 50 lb 22

LOCTITE 609 RETAINER 848745 250ml bottle 11 LOCTITE PC 9458 FAST SET GROUT 1751943 2 gal 22

LOCTITE 609 RETAINER 848744 50ml bottle 11 LOCTITE SF 7625 RUST TREATMENT 1751843 1 gal 22

LOCTITE 638 RETAINER 1865048 250ml bottle 11 LOCTITE LB 100 MAINTAIN 627004 312g aerosol can 22

LOCTITE 638 RETAINER 1865160 50ml bottle 11 LOCTITE SF 7600 RUST CONVERTER 1649154 1 litre 22

LOCTITE 641 RETAINER 848750 250ml bottle 11 LOCTITE SF 7600 RUST CONVERTER 1649155 4 litre 22

LOCTITE 641 RETAINER 848752 50ml bottle 11 LOCTITE LB 8711 PENETRATING OIL 1751845 16 oz aerosol can 23

LOCTITE 648 RETAINER 1865164 250ml bottle 11 LOCTITE LB 8017 MOLY DRY FILM 1751859 12 oz 23

LOCTITE 648 RETAINER 1865163 50ml bottle 11 LOCTITE LB 8040 FREEZE AND RELEASE 1752559 310ml 23

LOCTITE 660 RETAINER 1752417 50ml bottle 10 LOCTITE 5070 PIPE REPAIR KIT 1752402 2x6 23

LOCTITE EA 3463 METAL MAGIC STEEL STICK 1752399 4 oz 14 LOCTITE TRANSFORMER REPAIR KIT 1035886 NA 23

LOCTITE EA 3478 SUPERIOR METAL 680035 1 kg 14 LOCTITE O-RING KIT 1754762 mm size 23

LOCTITE EA 3471 STEEL PUTTY 1752406 1 lb 14 LOCTITE O-RING KIT 1754763 inch size 23

LOCTITE EA 3471 STEEL PUTTY 1752434 1 lb 14 LOCTITE PC 9660 MAXICOAT 1751848 1 gal 23

LOCTITE PC 3473 FAST STEEL PUTTY 680036 500 g can 15 LOCTITE SF F720RD COLOR GUARD 1751913 1 gal 23

LOCTITE EA 3479 METAL SET HTA 1752395 500 g 15 LOCTITE SF 7693 COLD GALVANIZING COMPOUND 1751854 15 oz aerosol can 23

30 | Maintenance Solutions
Properties chart
Dry Service Compressive Shear Strength Tensile Working
Page Product Size Coverage @ Colour Temperature Hardness Cure Time Mix Ratio Mix Ratio
6mm thickness Strength Elongation % N/mm2, 0.1mm gap Strength Shore D Time Hours @ 25°C by volume (R:H) by weight (R:H)
Range N/mm2 and etch aluminium N/mm2 Minutes @ 25°C

Dark
14 LOCTITE® EA 3478 Superior Metal 1 kg kit 232cm2 -30ºC to +120ºC 125 N/mm2 - 17 N/mm2 38 N/mm2 90 20 6 4:1 7.25:1
Grey

14 LOCTITE® EA 3471 Steel Putty 1 lb kit 278cm2 Grey -30ºC to +105ºC 61.7 N/mm2 - 9.6 N/mm2 27.8 N/mm2 82 30 6 2.5:1 6.25:1

15 LOCTITE® PC 3473 Fast Steel Putty 500 g kit 370cm2 Grey -30ºC to +95ºC 51 N/mm2 - 15 N/mm2 27 N/mm2 80 3 10 min 1:1 100:56.5

15 LOCTITE® PC 7222 Wear Resistant Putty 500 g kit 380cm2 Grey -30ºC to +105ºC 72 N/mm2 - 16.8 N/mm2 21 N/mm2 85 30 6 2:1 2:1

400 ml
22 LOCTITE® PC 7393 Rapid Rubber Repair dual - Black -29ºC to +82.2ºC - - 3.7 N/mm2 - **86 1 2 1:1 -
cartridge

22 LOCTITE® MR Flex 80 Putty 1 lb kit 604cm2 Black -29ºC to +82.2ºC - 350 3.3 N/mm2 - **88 10 8 2.5:1 2.6:1

22 LOCTITE® MR Flex 80 Pourable Repair Compound 1 lb kit 442cm2 Black -30ºC to +80ºC - 237 3.6 N/mm2 7.5 N/mm2 **87 20 8 100:13.3 77:23

14 LOCTITE® EA 3463 Metal Magic SteelTM Stick 113 g stick 45cm2 Grey -30ºC to +120ºC 83 N/mm2 - ≥ 3.45 N/mm² 17.2 N/mm2 >70 2.5-5 10 min - -

15 LOCTITE® PC 9410 Magna Crete 5 gal kit 52m2 Grey -50ºC to +1,100ºC 90 N/mm² - - - - 5-20 1-2 Refer to TDS Refer to TDS

15 LOCTITE® PC 9416 Floor Fill 20 kg kit - Grey -30ºC to +110ºC 90 N/mm² - - - - 40 24 16:3.2:80.8 4.6:1:9.8

17 LOCTITE® PC 7218 Wearing Compound 2 kg kit 1480cm2 Grey -30ºC to +120ºC 110.3 N/mm² - - - 90 30 7 2:1 2:1

16 LOCTITE® PC 7339 Ultra High Temperature Pneu Wear 25 lb kit 0.8m2 Red -29ºC to +288ºC - - 34.5 N/mm2 - 90 30 2 hrs @ 145ºC 2:1 2.27:1

Dark
16 LOCTITE® PC 7333 Brushable Ceramic 1 kg kit *1.1m2 -29ºC to +120ºC 70 N/mm2 - 21 N/mm2 30 N/mm2 85 30 6 2.75:1 4.8:1
Grey

8 hrs
16 LOCTITE® PC 7234 High Temperature Brushable Ceramic 2 lb kit *1.1m2 Red -29ºC to +288ºC 102 N/mm2 - 16.7 N/mm2 37 N/mm2 88 120 2.6:1 4.25:1
+3 hrs @ 150ºC

17 LOCTITE® PC 7319 Chemical Resistant Coating 20 kg kit *6.8m2 Grey -30ºC to +120ºC 68 N/mm2 - 18.2 N/mm2 33 N/mm2 85 30 16 2.3:1 3.4:1

*0.5mm thick layer

**Shore A
Henkel Adhesives Technologies India Private Limited

Mumbai
Corporate Office Chennai
L & T Seawoods, Grand Central, Arunodayam, No. 14 & 16,
401, B Wing, 4th Floor, Tower 1, Raman Street, North Boag Road,
Seawoods, Navi Mumbai - 400 706, T. Nagar, Chennai - 600 017,
Maharashtra, India. Tamil Nadu, India.
Phone : +91 22 7130 1300 Phone : +91 44 7199 7000

Pune Delhi
Survey No. 234, 235 and 245, 74, Industrial Corporation,
India Land Global Industrial Park, Mehrauli Gurgaon road,
Phase 1, Hinjewadi, Pune - 411 057, Gurgaon - 122 001,
Maharashtra, India. Haryana, India.
Phone : +91 20 7199 7000 Phone : +91 0124 509 7000

Factory
D3/D4, MIDC Industrial Estate,
Jejuri, Purandhar, Pune - 412 303,
Maharashtra, India.
Phone : +91 2115 718 000

www.henkel.in
www.henkel-adhesives.com/in
www.linkedin.com/company/henkel-adhesives

® All trademarks, except where otherwise noted, are the properties of or used under licence by Henkel.
© Copyright 2019. Henkel. All rights reserved. IN-0768-ACM/Maintenance Solutions/1121