Basic Standards
2.1 The Logo 2.2 Logo Versions 2.3 Adding Color 2.4 Reverse 2.5 Unacceptable Logo Versions 2.6 University Seal 2.7 University Typography 2.8 Brand Consistency
UNIVERSITY, STANDARD
The Logo
The elements of the Embry-Riddle logo have been carefully positioned and proportioned so that the university identity remains consistent. The following pages show the different ways in which these elements may be used correctly for virtually every need and situation. To avoid confusion, the university logotype and the university seal are also included. It is important that these identifying marks of the university are used in the manner specified in this manual. The eagle graphic located to the left of the logotype in the logo is referred to in this manual as the university symbol. The symbol cannot replace the logotype as an identifying mark of the university.
Embry-Riddle Aeronautical University Logo (consisting of the university logotype and the symbol)
Embry-Riddle Aeronautical University Logotype
Embry-Riddle Aeronautical University Seal
2.1
UNIVERSITY, STANDARD
Logo Versions
It is acceptable to use the logotype (Embry-Riddle Aeronautical University) either with the university symbol or by itself in either of the ways shown below. Position the university logo at least 1/8" away from other text, so that the text is not interpreted as part of the logo.
Embry-Riddle Aeronautical University Logotype
Embry-Riddle Aeronautical University Logo
2.2
UNIVERSITY, STANDARD
Adding Color
The same guidelines apply to color logos that apply to the black-and-white versions with regard to usage and choices. When using the university logo in color, the logotype should always appear in PMS 287 blue. The options available for the use of the university symbol are illustrated below. NOTE: PMS 287 translates to the following in four process color reproduction: C:100; M: 69; Y:0; K:11.
Embry-Riddle Aeronautical University Logo (with PMS 287 Blue Symbol)
Embry-Riddle Aeronautical University Logotype
Embry-Riddle Aeronautical University Logo (with PMS 871 Gold Symbol)
2.3
UNIVERSITY, STANDARD
Reverse
You may reverse any of the approved versions of the university logo shown in section 2.2 as long as you follow the same guidelines and note the following: 1) Reverse the logo out of a solid black or dark background. 2) Allow at least 1/4" of background to extend from the top, bottom, left, and right of the logo.
1/4"
1/4" Embry-Riddle Aeronautical University Logo
2.4
UNIVERSITY, STANDARD
Unacceptable Logo Versions
For the purpose of presenting a consistent identity to the public, it is necessary to avoid the following misuses of the logo:
When the symbol is used with the log, do not change the proportions between logotype and symbol
Do not use the official university seal on brochures or other promotional materials
Do not use elongated or condensed logotype or symbol treatment
2.5
UNIVERSITY, STANDARD
Unacceptable Logo Versions
For the purpose of presenting a consistent identity to the public, it is necessary to avoid the following misuses of the logo:
Do not alter the spacing of any element of the symbol and logotype
Do not use a drop shadow with the logo
Avoid poor reproduction of the logo
Do not use logo at an angle
Do not use logo with a dark or obscuring background
2.5
UNIVERSITY, STANDARD
University Seal
The university seal (shown below) should not be used in any publications or materials. This seal is designed for official use only on university contracts, transcripts, and diplomas.
The Official Seal of Embry-Riddle Aeronautical University
2.6
UNIVERSITY, STANDARD
University Typography
For the sake of legibility, do not use type styles that are decorative, fancy, or hard to read. A type style should draw attention to the message it carries, not to itself. Suggestions for good type styles include the following: Sans serif fonts: Universe, Helvetica, Avant Garde, Arial, Gill Sans, News Gothic. Serif fonts: New Baskerville, Garamond, Times, Palatino, Centaur, Georgia. Samples of some of the acceptable, commonly available type styles are shown below:
Universe
ABCDEFGHIJKLMNOP QRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890!@#$%^&*();:
News Gothic
ABCDFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890!@#$%^&*();:
Garamond
ABCDEFGHIJKLMNOP QRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 1234567890!@#$%^&*();:
2.7
UNIVERSITY, STANDARD
Brand Consistency
Although the standards in this manual are meant to provide flexibility in the many different materials we produce, the standards themselves should never be compromised or altered. Please remember the following:
Never change the proportions of the symbol and the logotype. Never use colors on the logo other than the colors specified in section 2.3 of this manual. Never nullify the effectiveness of the logo by placing competing elements directly on or near it. Never rotate the symbol or the logotype (with the exception of binder spine applications). Never add a drop shadow or introduce other graphic elements that interfere with the logo. Never use the university seal as a logo. Never use a background color that interferes with or reduces the impact of the logo. Never elongate or condense the logotype or symbol. Never use a logo with poor reproduction. Never alter the spacing between any elements of the logo.
X X
X X
2.8
