S-423T Super Terminator

End Fittings
Wire Rope
• The 423T wedge socket terminations have a minimum efficiency rating on
most high performance, high strength, compacted strand, rotation resistant
wire ropes of 80% based on the catalog breaking strength of the various
ropes.**
• Design eliminates the difficulty of properly seating the wedge with high
performance wire rope into a wedge socket termination.
• Proper application of the Super TERMINATOR eliminates the “first load”
requirement of conventional wedge socket terminations.
• S-423TW Wedge Kit can be retrofitted onto existing Crosby S-421
TERMINATOR wedge sockets.
• Wedge and accessories provided with a zinc finish
• Meets the performance requirements of EN13411-6.
• Meets or exceeds all requirements of ASME B30.26 including identification,
ductility, design factor, proof load and temperature requirements.
Importantly, these sockets meet other critical performance requirements
including fatigue life, impact properties and material traceability, not
addressed by ASME B30.26. K
• US Patent 6,898,827.
S-423T • Basket is cast steel and individually magnetic particle inspected.
Wedge sockets meet the performance • Pin diameter and jaw opening allows wedge and socket to be used in
requirements of Federal Specificatio conjunction with closed swage and spelter sockets.
RR-S-550F, Type C, except those
provisions required of the contractor. • Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates
For additional information, see page loss or “punch out” of the wedge.
452 of General Catalog. • Eliminates the need for an extra piece of rope, and is easily installed.
• The TERMINATOR® wedge eliminates the potential breaking off of the tail
due to fatigue.
• The tail, which is secured by the base of the clip and the tension device, is
left undeformed.
• Available with Bolt, Nut, and Cotter Pin.
• Available with API-2C certification upon request.

**Due to the unique construction of various ropes, Crosby cannot make

a broad general statement that all current and future design of ropes, SEE APPLICATION AND
when properly assembled with the Super TERMINATOR, will achieve a
minimum 80% termination efficienc . Contact wire rope manufacturer or
WARNING INFORMATION
Scan this QR code Page 59
with your smart device Crosby engineering (918-834-4611) to determine efficiency rating for a Para Español: www.thecrosbygroup.com

to view our Super specific rope

Terminator video.

S-423T WEDGE SOCKETS Assembly includes Socket, Wedge, Pin, Wire Rope Clip, Tensioner, Bolts and Secondary Retention Wire.
S-423T S-423TB
Wire Rope Assembly with Round Pin Assembly with Bolt, Nut S-423TW**
Dia. and Cotter Pin and Cotter Pin Wedge Kit
S-423T S-423TB S423TW
S-423T Weight Each S-423TB Weight Each S-423TW Weight Each
(in) (mm) Stock No. (lb) (kg) Stock No. (lb) (kg) Stock No. (lb) (kg)
5/8 14- 16 1035123 12.7 5.8 1035218 13.1 5.9 1034018 5.2 2.4
3/4 18-19 1035132 19.4 8.8 1035227 19.1 8.7 1034027 7.2 3.3
7/8 20-22 1035141 28.8 13.1 1035236 27.8 12.6 1034036 10.3 4.7
1 24-26 1035150 39.2 17.8 1035245 37.3 16.9 1034045 11.9 5.4
1-1/8 28 1035169 57.1 25.9 1035254 57.9 25.9 1034054 19.9 9.0
1-1/4 30-32 1035178 88.6 40.2 1035272 88.1 39.9 1034063 33.8 15.3
**Kit contains Wedge, Wire Rope Clip and Bolts, Tensioner Bolt and Secondary Retention Wire.

Wire Rope S-423T Dimensions

Dia. Stock (in)
(in) (mm) No. A B C D E F G H J* K L P R S T U V
5/8 14-16 1035123 8.25 4.50 1.25 1.19 3.00 4.06 2.13 4.61 12.31 1.09 1.22 2.25 .56 3.25 .75 6.88 2.60
3/4 18-19 1035132 9.88 5.20 1.50 1.38 3.25 4.81 2.44 5.37 14.69 1.50 1.40 2.62 .66 3.63 .88 7.65 3.02
7/8 20-22 1035141 11.25 5.88 1.75 1.63 3.81 5.73 2.69 6.16 16.98 1.59 1.67 3.13 .75 4.31 1.00 9.47 3.47
1 24-26 1035150 12.81 6.56 2.00 2.00 3.81 5.73 2.94 7.05 18.54 1.44 2.01 3.75 .88 4.70 1.13 10.41 3.82
1-1/8 28 1035169 14.38 6.94 2.25 2.25 4.00 6.85 3.38 7.81 21.23 1.12 2.26 4.25 1.00 5.44 1.25 11.83 4.22
1-1/4 30-32 1035178 16.34 8.63 2.62 2.50 4.50 7.76 3.57 9.38 24.10 1.50 2.34 4.50 1.06 6.62 1.38 13.87 5.82
* Nominal NOTE: For intermediate wire rope sizes, use next larger size socket. The S-423T Super TERMINATOR wedge is designed to be assembled only into the Crosby S-421T TERMINATOR
socket body. IMPORTANT: The S-423TW for sizes 5/8" through 1-1/8" will fit respective size standard Crosby S-421 basket. The 1-1/4" S-423TW will only fit the Crosby S-421 1-1/4" basket marked
with TERMINATOR.

Copyright © 2019 The Crosby Group LLC All Rights Reserved 39

02_Wire_Rope_End_Fittings.indd 39 8/16/19 9:37 AM