DGS
ENGINEERING
SOLUTIONS
INDUSTRIAL FILTERS
Cartridge Filter Housing
Technical Specifica ons
N3
Sizes (Cartridge filter housings suitable for)
• 1 No. To 500 Nos. Of Cartridges in Single Housing
• 2”, 2.5”, 4”, 6” & 8” Diameter of Cartridge
N1 • 10”, 20”, 30” & 40” Length of cartridge
Flow Rate
• Capacity: Up to 2000 m3/hr & more
Material of Construc on
• SS 316L • SS 316 • SS 304 • MILD STEEL •
• POLYPROPYLENE on any metal
N5
N2
• RUBBER LINING on any metal
• TEFLON LINING on any metal
N4
• TEFLON coa ng on any metal
N3
Type Of Fi ngs (Cartridge) Gasket / O Ring Material
• Double Open End (DOE) Type • Neoprene
• Code 7 (226 O Ring) Design • Nitrile
• Code 3 (222 O Ring) Design • Silicone
• NPT Threaded Connec on Type • Viton
• EPDM
End connec ons • PTFE
• NPT / BSP Threaded • Spiral wound
• Flanged Table E / Table F
• ANSI B 16.5 Flanged
• DIN Standard
N2
N4
N1
• Tri Clover Adaptors
Bag Filter Housing
Technical Specifica ons
Sizes Bag filter system suitable for End connec ons available
Diameter Length No. of Bags • NPT / BSP Threaded
in Inch. in Inch. Per Housing. • Flanged Table E / Table F
N3
Ø 4" Dia. 10" Long 1 No. • ANSI B 16.5 Flanged
Ø 4" Dia. 20" Long 1 No. • DIN Standard
Ø 7" Dia. 16" Long 1 No. • Tri Clover Adaptors
Ø 7" Dia. 32" Long 1 No.
Ø 7" Dia. 32" Long 2 No. Type of fi ngs (Bag)
N1 Ø 7" Dia. 32" Long 3 No. • PP Collar Bag
Ø 7" Dia. 32" Long 4 No. • Snap Band Bag
Ø 7" Dia. 32" Long 5 No. • SS Ring Bag
Ø 7" Dia. 32" Long 6 No. • Flange Collar Bag
Ø 7" Dia. 32" Long 7 No.
Ø 7" Dia. 32" Long 9 No.
Flow Rate
• Capacity: Up to 2000 m 3/hr & more
Material of Construc on
• SS 316L • SS 316 • SS 304
N2 • MS
• Polypropylene
• RUBBER LINING on any metal
N4
Gasket / O Ring Material
• Neoprene • Nitrile • Viton
• EPDM • PTFE • Silicone
Basket Filter & Strainers
Technical Specifica ons
Sizes
• 1” Line Size To 24” Line Size & More
Material of Construc on
• SS 316L • SS 316 • SS 304
• MILD STEEL
• POLYPROPYLENE
• RUBBER LINING on any metal
Flow Rate
• Capacity: Up to 2000 m3 /hr & more
Basket element design available
• Single Cylinder Design
• Mul Cylinder Design
• Pleated Element Design
• Mul Cylinder Design
Basket Filter End Connec ons Available
• NPT / BSP Threaded
Tee-Type Strainer • Flanged Table E / Table F
• ANSI B 16.5 Flanged
• DIN Standard
• Tri Clover Adaptors
Duplex Filter Housing
Technical Specifica ons
Sizes
• 1/4” Line Size To 24” Line Size & More
Material of Construc on
• SS 316L • SS 316 • SS 304
• MILD STEEL
• POLYPROPYLENE
• RUBBER LINING on any metal
Flow Rate
• Capacity: Up to 2000 m3/hr & more
End Connec ons Available
• NPT / BSP Threaded
• Flanged Table E / Table F
• ANSI B 16.5 Flanged
• Tri Clover Adaptors
Type of valve available
• 3 - Way Ball Valve
• Bu erfly Valve with Tee
Design
• Customized
Cartridge Filters
PP Spun Bonded Filter Cartridge PP Wound Filter Cartridge Glass Fiber Wound Filter Cartridge
Diameter : 2.5", 4" & 4.5" Diameter : 2.5", 4" & 4.5" Diameter : 2.5", 4" & 4.5"
Internal Diameter : 28 mm Internal Diameter : 28 mm Internal Diameter : 28 mm
Length : 10", 20", 30", 40" Length : 10", 20", 30", 40" Length : 10", 20", 30", 40"
Material of Construc on : 100% Polypropylene Core : PP, Stainless steel, Core : Stainless steel
Micron Ra ng : 1, 5, 10, 25, 50, 75, 100 Material of Construc on : 100% Polypropylene & Co on Material of Construc on : Glass Fiber
Configura on : DOE, SOE Micron Ra ng : 1, 5, 10, 25, 50, 75, 100 Micron Ra ng : 1, 5, 10, 25, 50, 75, 100
Configura on : DOE, SOE Configura on : DOE, SOE
Cartridge Filters
PP Pleated Filter Cartridge Resin Bonded Filter Cartridge Paper Pleated Filter Cartridge
Diameter : 68 mm Diameter : 64 mm Diameter : 2.5", 4", 4.5" & Customized
Internal Diameter : 28 mm Internal Diameter : 28 mm ID : 28 mm & Customized
Length : 10", 20", 30" & 40" Length : 10", 20", 30", 40" Length : 10", 20", 30", 40" & Customized
Material Of Construc on : Polypropylene & PTFE MOC : Phenolic & Cellulose Resin Bonded MOC : SS/GI/PP/PU/Plas c
Micron Ra ng : 0.2, 0.45, 1, 2, 5 & 10 Micron Ra ng : 1, 5, 10 & 20 MOC Of Media : Paper, PP, Polyester, HDPE, Nylon
Configura on : DOE, SOE & Code 7 Contruc on : Grooved & Ungrooved Filter Design : Cylinder & Pleated
Configura on : DOE Micron Ra ng : 1, 2, 3, 5, 10, 25, 50, 75, 100, 300, 500
Construc on : Adhesive Joint
Configura on : DOE, SOE & Customized
Cartridge Filters
Stainless Steel Filter Cartridge SS Sintered Powder Filter Cartridge Dust Collec on Filter Cartridge
Diameter : 2.5", 4", 4.5" & Customized Diameter : 2", 2.5" & 3" Diameter : 2.5", 4", 4.5" & Customized
Internal Diameter : 28 mm & Customized Internal Diameter : 28 mm, 40 mm, & 50 mm Internal Diameter : 28 mm & Customized
Length : 10", 20", 30", 40" & Customized Length : 10", 20", 30", 40" & Customized Length : 10", 20", 30", 40" & Customized
Material Of Construc on : SS 304, SS 316 & SS 316L Material Of Construc on : SS 316 & SS 316L MOC Of Caps : SS/GI/PP/PU/Rubber
MOC Of Media : SS 304/316/L Woven Mesh Type Of Filter Design : Cylinder MOC Of Media : Cellulose Paper, PP,
316L Non-Woven Fiber Felt Micron Ra ng : 0.2, 1, 2, 3, 5, 10, 50, 75, 100 Spun Bonded Polyester, HDPE, Nylon
Type Of Filter Design : Cylinder & Pleated Construc on : 100% Welded Micron Ra ng : 1, 5, 10, 25, 50
Micron Ra ng : 0.2, 1, 2, 3, 5, 10, 25, 50, 100 Configura on : DOE, SOE, Code 7, NPT & BSP Coa ng : PTFE, An sta c (Aluminum coa ng),
Construc on : 100% Welded & Adhesive Oil & Water Repellant
Configura on : DOE, SOE, Code 7, NPT & BSP Configura on : Lugs type, Collar Type,
Flange type & Tie-Rod Type Fi ng
Filter Bags
Liquid Filter Bags
Standard Sizes(Customized sizes are available) Fitment Configra on
• Ø 4” x 10” Long • PP Collar Bag
• Ø 4” x 17” Long • Steel Ring Bag
• Ø 4” x 20” Long • Snap Bond Fit Bag
• Ø 7” x 17” Long
• Ø 7” x 32” Long Filter Media
• Polypropylene
Filtra on ra ng • Polyester
• 1, 5, 10, 20, 50, 100, 200 Micron • Nylon
• HDPE
Configura on
• Fused (welded)
• S tched Types
Dust Collec on Filter Bags
Sizes Micron Ra ng
• Customized sizes are available • 1, 5, 10, 25, 50, 100, 250, 500
Filter media Available coa ng & treatment
• Woven Media • An sta c treatment with copper wire
• Non-Woven Media • An sta c treatment with stainless steel fiber
• Glass Fiber • Water & oil repellent
• PTFE coa ng & laminated
Configura ons
• Snap band type
• Flange collar type
• Customized
Panel Filter
Technical Specifica ons
Sizes
• Standard & Customized
MOC of Frame
• SS 316L • SS 316 • SS 304
• Aluminum
• GI
Micron Ra ng
• 0.2, 0.45, 1, 2, 5, 10, 25, 50, 100 & More
MOC of Media
• PP, Polyester, Synthe c Non-woven
• HDPE Mesh
• SS Mesh
• Nylon Mesh
Type of Filter
• Hepa Filter
• Pre Filter
• V Cell Filter
• Pocket Filter
Filter Media
Coolent Filter Paper Roll
Sizes(Customized sizes are available) Filter Media
• 400 mm to 3000 mm width • Polypropylene
• Customized sizes are available • Polyester
• Viscose
Filtra on ra ng • Needle Punch
• 1, 5, 10, 20, 50, 100 Micron
Configura on
• 30 GSM to 200 GSM
Filter Media
Sizes Micron Ra ng
• Customized sizes are available • 1, 5, 10, 25, 50, 100
Filter media
• Woven Media
• Non-Woven Media
• Glass Fiber
• Co on
• Polypropylene
• Polyester
• Nylon
• HDPE
+91 99744 05037
sales@dgsengisol.com I info@dgsengisol.com
325. Block-D, Sumel-8, Old Bharat Bobin Mill, Nr. Ajit Mill Char Rasta, Rakhiyal, Ahmedabad-23. (Guj.)
