Scribd
Upload
141 views1 page

2-2. Mechanic's Tools

This document lists tools that are required to perform overhaul procedures on engines. It includes various wrenches, sockets, screwdrivers, pliers, hammers, pullers, calipers, gauges, clamps, brushes, lights, wheels, squares, magnifiers, knives, crimp tools, ties, expanders, vises, drifts, magnets, extractors, spatulas, sprayers and wrenches. The tools are organized into categories of open-end wrenches, socket wrenches, ratchets, torque wrenches, micrometers, allen wrenches, screwdrivers, pliers, hammers, pullers, cal

Uploaded by

Charles Pereira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
141 views1 page

2-2. Mechanic's Tools

This document lists tools that are required to perform overhaul procedures on engines. It includes various wrenches, sockets, screwdrivers, pliers, hammers, pullers, calipers, gauges, clamps, brushes, lights, wheels, squares, magnifiers, knives, crimp tools, ties, expanders, vises, drifts, magnets, extractors, spatulas, sprayers and wrenches. The tools are organized into categories of open-end wrenches, socket wrenches, ratchets, torque wrenches, micrometers, allen wrenches, screwdrivers, pliers, hammers, pullers, cal

Uploaded by

Charles Pereira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Tools

2-2. Mechanic’s Tools


The tools listed below are required to perform overhaul procedures on the engines.
Table 2-3. Common Tools
Open-End Wrenches – 1/4-inch through 1-Inch 1/4-inch Slide hammer
Socket Wrenches:
Ratchets:
1/4-inch drive
• 1/4-inch drive
Socket Sizes: 5/32-inch through 1/2-inch
• 3/8-inch drive
3/8-inch or 1/2-inch drive
• 1/2-inch drive
Socket Sizes: 7/16-inch through 1-1/2-inch
Deep Well Sockets:
Heat Gun
1/2-inch drive
(variable intensity/ equipped with a small tip)
Socket Sizes: 7/16-inch drive through 1-inch
Calibrated Torque Wrenches: • Drill, 0.266 (H) Pneumatic drill
• 0 to 1000 in-lbs • 00.339 Drill High speed borer
• 0 to 500 in-lbs • Drill Index
• 0 to 100 ft-lbs
Micrometers Ball Peen Hammer
Allen Wrenches - assortment Pullers
Slotted Screwdrivers – assortment Blind Bearing Remover
Phillips Screwdrivers – Nos. 1 and 2 Vernier Calipers
Safety Wire Pliers Leather or soft plastic Mallet
Common Pliers Small hole gauges, thickness gauges
Diagonal Cutter Pliers Feeler Gauges (leaf-type)
Needle-Nose Pliers C-Clamps
Duck Bill Pliers Brass Wire Brush
Snap Ring Pliers (with 90-degree bend) Stiff-bristled, Non-wire Scrub Brush
Inspection light/flashlight Dry Blaster Cleaning Tool
Two-inch (2”) Merrit Wheel (flap wheel) Air Impact Tool
T-handle Drive Toolmaker’s Square
Magnifying Glass (10X power) Profilometer
Mirror Chamfer Tool
Utility Knife Morse Adapter
Scissors Heavy Duty Drill Press
Crimp Tool Arbor Press (and 8-inch arbors)
Wire Ties Vertical Mill
Ring Expander Engine Hoist
Bench Vise with Shielded Jaws Engine Stand
Fiber Drift, Brass Drift, Pin or Punch Transport dolly
Magnet Aircraft Tie-downs and Stop-blocks
Stud Extractor Tool V-blocks
Ezy Out Catch Basins (Fuel and Oil)
Wood or Plastic Spatula Permanent Marker
Tank Sprayer Strap Wrench

2-24 Standard Practice Maintenance Manual


15 Sep 2019

You might also like