Scribd
Upload
68 views2 pages

TS 33DTDS

TS-33D is a 2-part, 1:1 mix composite material that is black in color, has a viscosity of 400,000 cps and specific gravity of 1.5. It is a thixotropic paste that cures in 15 minutes at 150°C and has a durometer of 33 Shore D, tensile strength of 1000 PSI and 250% elongation. It is durable, abrasion resistant and machines like metal but molds like plastic and flexes like rubber, withstands high pressures and is invisible to radio waves, making it suitable for military antenna applications.

Uploaded by

Adiel Kazadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views2 pages

TS 33DTDS

TS-33D is a 2-part, 1:1 mix composite material that is black in color, has a viscosity of 400,000 cps and specific gravity of 1.5. It is a thixotropic paste that cures in 15 minutes at 150°C and has a durometer of 33 Shore D, tensile strength of 1000 PSI and 250% elongation. It is durable, abrasion resistant and machines like metal but molds like plastic and flexes like rubber, withstands high pressures and is invisible to radio waves, making it suitable for military antenna applications.

Uploaded by

Adiel Kazadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Versine 2-Part

Composite

Typical Properties

Color Black
TS-33D Viscosity, cps
Specific Gravity
400,000
1.50
Consistency Thixotropic paste
Work Time @ RT >7 Days
Product Description Cured @ 150°C 15 Minutes
Durometer 33 Shore D
Tensile Strength 1000 PSI
TS-33D is a revolutionary new engineering
Elongation 250%
composite material. It’s a 2-part, 1:1 mix,
rubber-like product that is unique as it machines
like a metal, molds like a thermoset plastics and
flexes like a rubber. TS-33D withstands 22,000 Handling Precautions
PSI compression and bounces back. It’s tough,
abrasion resistant, and has low surface This is a platinum cure system product. The
coefficient of friction. Developed for military catalyst can be deactivated by exposure to sulfur
walkie-talkies antenna shielding, as in addition containing compounds like thiols, sulfides,
to being durable, it is invisible to radio waves. sulfates, organic rubber contaning sulfur,
nitrogen containing compounds like amines,
amides, imides, azides, tin metals or compounds,
Product Features or tin cured RTV’s.

• Fast heat cure


• Durable rubber-like product Solids
• No odor, non-corrosive addition cure
• No by-products, no shrinkage 99% solids

Typical Applications Limitations

• Military antennae Do not use product in fuel or solvent immersion


• Seals applications. Allow to fully cure before putting
• Gaskets assembly into service.

Chemical Cure System

Platinum catalyzed, addition cure


Handling and Safety

For maximum shelf life, keep containers sealed


when not in use. Keep out of the reach of
children. Uncured sealant irritates eyes and
skin. Refer to the SDS.

Shelf Life

Sealed containers are guaranteed for 12 months


from the ship date when stored in a cool dry area
below 70°F.

Limited Warranty

All recommendations, statements and technical


data herein are based on tests we believe to be
reliable and correct, but accuracy and
completeness of said tests are not guaranteed
and are not to be construed as warranty, either
expressed or applied. User shall rely on his/her
own information and tests to determine
suitability of the product for the intended use,
and the user assumes all risk and liability
resulting from the use of this product.
Manufacturer’s sole responsibility shall be to
replace that portion of product that the
manufacturer proves to be defective.
Manufacturer shall not be liable to the buyer or
any third party for injury, loss or damage
directly or indrectly resulting from the use of, or
inability to use, the product. Recommendations
or statements other than those contained in a
written agreement signed by an officer of the
manufacturer shall not be binding by the
manufacturer.

This product has not been tested for, and is


therefore not recommended for, uses for which
prolonged contact with mucous membranes,
abraded skin, or blood is intended; or for uses
which implantation within the human body is
intended.

*****Customized versions available upon


request*****

You might also like