Scribd
Upload
2K views1 page

Rajendra Ferromet Pvt. LTD.: Material Test Certificate According To en 10204-3.1

Rajendra Ferromet Pvt. Ltd. issued a material test certificate for 4 flanges supplied to MSM Process Solutions Pvt Ltd. according to EN 10204-3.1 standards. The flanges made of ASME SA182 F304/304L stainless steel met all chemical composition, mechanical property, hardness, dimensional and visual inspection requirements. They were solution annealed at 1060°C and the IGC and micro tests were satisfactory according to ASTM standards. The flanges were marked with the manufacturer's logo, material, size, pressure class and lot number.

Uploaded by

quality
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Rajendra Ferromet Pvt. LTD.: Material Test Certificate According To en 10204-3.1

Rajendra Ferromet Pvt. Ltd. issued a material test certificate for 4 flanges supplied to MSM Process Solutions Pvt Ltd. according to EN 10204-3.1 standards. The flanges made of ASME SA182 F304/304L stainless steel met all chemical composition, mechanical property, hardness, dimensional and visual inspection requirements. They were solution annealed at 1060°C and the IGC and micro tests were satisfactory according to ASTM standards. The flanges were marked with the manufacturer's logo, material, size, pressure class and lot number.

Uploaded by

quality
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RAJENDRA FERROMET PVT. LTD.

Office: 67/71, Dr. M.G. Mahimtura Marg, 3rd Kumbharwada Lane, MUMBAI 400 004. Tel: 23895862 Fax: 23895863 E-mail: rajendraforge@mtnl.net.in
Factory: Plot No.73, Road No.B/2, 52 Hectar Expansion Area, New G.I.D.C. Ind. Estate, Umbergaon-396 171, Dist.:Valsad, Gujarat.
MATERIAL TEST CERTIFICATE ACCORDING TO EN 10204- 3.1
Certificate No.2320 Our Challan No.: 59 Date : 27/04/2023
Date : 27/04/2023
CLIENT: MSM PROCESS SOLUTIONS PVT LTD DESCRIPTION: ASME SA182 F 304/304L (ED 2021) QUALITY FLANGES

P.O.NO. 062/321 DATE : 27/04/2023 SPECIFICATION: DIMENSION AS PER ASME B16.5 (ED 2017)

ITEM DESCRIPTION QTY LOT NO. CHEMICAL ANALYSIS (%) PHYSICAL PROPERTIES
NOS C Mn Si S P Cr. Ni Mo N R.A.% Y.S.(0.2%) UTS Elong %
MAX. 0.030 2.00 1.00 0.030 0.045 20.00 13.00 - 0.10 Mpa Mpa GL=50MM
SA182 F304/304L FLANGES MIN. 18.00 8.00 - 50.00 170 485 30.00
WITH HUB
1 25NB X 150# SORF 4 FSS-001 0.027 1.255 0.285 0.010 0.020 18.255 8.145 - 0.022 66.43 308.1 587.1 45.20
2 80NB X 150# SORF 4 FSS-001 0.027 1.255 0.285 0.010 0.020 18.255 8.145 - 0.022 66.43 308.1 587.1 45.20

The above material was manufactured, sampled, tested & inspected in accordance with the requirement of the material specification and
has been found to meet the requirements.

HARDNESS VISUAL INSPECTION DIMENSIONAL INSPECTION SPECIAL NOTE:


BHN 150/150 O.K. SATISFACTORY MATERIALS CONFORM TO ASME SA182 F304/304L STANDARD
IGC TEST AS PER ASTM A262 PRACT."E" FOUND SATISFACTORY
MICRO TEST ASTM E-112 FOUND SATISFACTORY
SOLUTION ANNEALED AT 1060oC.& W.Q.
IDENTIFICATION: MFR'S LOGO/MOC/SIZE/CLASS/LOT NO. For RAJENDRA FERROMET PVT.LTD.

INSPECTED BY: Manager - Quality Control

You might also like