Scribd
Upload
7K views1 page

Hand Tool Inspection Checklist

The document provides a checklist for inspecting common hand tools used in a workplace. It lists tools like chisels, files, hammers, screwdrivers, pliers, and scrapers. For each tool, it identifies key items to check such as heads being square, handles being intact, teeth or points being sharp, and jaws not being bent. Any deviations found during inspection are to be recorded in a deviation control log, with the corrective action and close-out date also noted to ensure issues are resolved.

Uploaded by

syed hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7K views1 page

Hand Tool Inspection Checklist

The document provides a checklist for inspecting common hand tools used in a workplace. It lists tools like chisels, files, hammers, screwdrivers, pliers, and scrapers. For each tool, it identifies key items to check such as heads being square, handles being intact, teeth or points being sharp, and jaws not being bent. Any deviations found during inspection are to be recorded in a deviation control log, with the corrective action and close-out date also noted to ensure issues are resolved.

Uploaded by

syed hassan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HAND TOOLS INSPECTION

Workplace: Work Area:


Name of Assessor: Asset No.

When performing the check write G for Good or D for Deviation in the appropriate space
If any deviation is detected, enter the information in the list at the bottom and notify the correct person to take corrective
action.

Check Item to check WEEK/MONTH

01 CHISES
Heads square and not mushroomed
Points sharp and square
02 FILES
Handles fitted
Teeth sharp and clean
HAMMERS
Handle clean and free of cracks
Head square and no mushroom
03 SCREW DRIVERS
Handles smooth finish
No cracks and clean
Points square, sharp and not chisel shaped
04 PLIERS
Teeth not worn and jaws not bent
Correct type for the job
Insulated not damaged
05 SCRAPERS
Handles free of hooks or nuts

Date of check
Assessor Name

Assessor signature

DEVIATION CONTROL

Date Reported Description of Deviation Corrective Action Close-out date Close-out Sign

1|Page

You might also like