THE BLUE LINE SERIES - OIL MIST SEPARATORS WITH HIGH PURIFICATION, LOW MAINTENANCE
AND OUTSTANDING OPERATION ECONOMY
ADVANTAGES
THE TECHNOLOGY OPERATING PRINCIPLE
Liquid to gas separation technology was invented
over 100 years ago. Based on that technology, 99.95% particle free air
3nine has been developing oil mist eliminators 2
Life Cycle Cost - Low
since 2001. Since then, 3nine has been awarded
with a large share of the global patents within
centrifugal separation technologies.
99.95% Particle free Air!
3nine offers the only technology that separates RECYCLE, REUSE &
mist particles from processed air and returns them 3 REDUCE Minimal Maintenance
for reuse as a liquid without using a filter. Our The air coming from a BLUE LINE
oil mist eliminator is 99.95%
unique centrifugal separation technology purifies
the air by separating the oil mist particles down to
particle-free and can be recycled Minimal Filter Change
directly back into the workshop.
1µm with a 99.9% efficiency. The separation technology also
Suitable for applications
abscheidung durch
Tellerseparation allows for reuse of oils and
The BLUE LINE units are our classic series of oil coolants. “With 3nine’s oil mist separators
mist eliminators with thousands in use around the we’re sure to minimize our with high degree of solid
By separating instead of collecting
world. They produce
aufgefangen
HEPA-Filter
im 500-2500m3/h and can oil and cutting fluid in a filter, you maintenance costs.” particles
handle machine tool cabins up to 20m3 with 1 unit. 1 will be able to reduce your
2 company’s CO₂ footprint. Åke Falk, Production Manager,
1 Sandvik Coromant AB, Sweden Minimal Duct Work
0.1 1 10 100
SEPARATION EFFICIENCY
Percent (%)
Recycling of cutting
The BLUE LINE series of units separate 99.9%
Inlet for
polluted air SECURE WORKING
fluids
1µm = 99.9%
of all fluid particles down to 1µm, 91% down to ENVIRONMENT
0.9µm and 82% down to 0.75µm. In order to
Separated oil/cutting fluid is
capture the finer particles that are <1µm, 3nine
0.9µm = 91%
uses a HEPA filter (H13) to ultimately clean the air
fed back out to the machine
tool for reuse.
Oil mist exposure can cause severe health No Oily Surfaces in the
issues for the operator. If not handled
Workshop
0.75µm = 82%
to 99.95%. With most of the particles separated properly, the oil mist will coat the surfaces in
in the disc stack, only 1% of the particles are the shop, causing risk of injuries by slippery
collected in the HEPA filter. 1 DISC STACK SEPARATION CLEAN IN PLACE (CIP) surfaces, an increased need of cleaning and Compact and Direct
Fluid particles will enter the disc stack to be separated “YOUR MAINTENANCE PARTNER” damages on electrical devices. With an oil
to 99,9% down to 1µm. On the discs, the small particles mist separator from 3nine, this will Installation
With our CIP (Clean in Place) parti- not be a problem. The air coming
coalesce and form larger particles. The bigger the particle,
0.1 1 10 Particle size
100 cle buildup on the rotor is avoid- out of a BLUE LINE oil mist
the faster they move towards the edge of the spinning disc
(µm)
to be thrown off and onto the inner wall of the rotor
ed. The CIP system uses clean eliminator is so clean that it Low energy use
The diagram shows the performance as a function of the particle cutting fluid from the machine
diameter. chamber to be returned to the machine tool for reuse. can be recycled right back
tool to automatically and con- into the workshop and
2 FINAL STAGE HEPA FILTER H13 tinuously clean the rotors. guarantees an optimal
3NINE’S LEADING COST SAVING working environment for the
The particles smaller than 1µm, will be collected by the operator.
TECHNOLOGY PROVIDES A final stage HEPA filter. With most of the particles sepa-
HEALTHIER AND SAFER WORKING rated in the rotor, the HEPA filter has a life expectancy of
ENVIRONMENT, ALLOWING YOU TO 12-18 months*. We use a high quality HEPA filter at grade
FOCUS ON YOUR PRODUCTION. H13 from Freudenberg, a filter with outstanding filtration
* 12-18 months filter life is based on 1 shift per day, 5
performance that ensures a 99.95% particle free air - a days a week and normal operating conditions.
performance equal to what is prescribed in hospitals.
LINA™ 500 3nine AB SWEDEN
SPECIFICATIONS
Suitable for cabin size <5m3
Air flow 500m3/h
P.O. Box 1163
Operating conditions <50°C
SE-131 27 Nacka Strand
Power supply 16 A, 230/460 V/3/50 Hz Visiting address:
Motor rating 0.55 kW Cylindervägen 12
Rated current 1.35 A Office: +46 (0)8 601 35 40
Weight 54 kg Fax: +46 (0)8 601 35 41
Height 840 mm info@3nine.com
www.3nine.se
BLUE LINE
Diameter Ø 480 mm
Inlet pipe Ø 125.5 mm
OIL MIST SEPARATORS
Sound level < 65 db (A)
3nine GmbH GERMANY
Geheimrat-Hummel-Platz 4
DE-65239 Hochheim/Main
Office: +49 6146-83 77 99-0
CLARA™ 1000
Fax: +49 6146-83 99-39
Suitable for cabin size <10m3
info@3nine.de
Air flow 1 000m3/h
Operating conditions <50°C
www.3nine.de
Power supply 16 A/400 V/3/50 Hz
Motor rating 1.5 kW 3nine FRANCE
Rated current 3.2
Jérôme Ludwikowski, Sales Manager
Weight 89 kg
Phone: +33 6 74 64 82 95
Height 1 145 mm
Diameter Ø 640 mm
info@3nine.fr
Inlet pipe Ø 161 mm
www.3nine.fr
Sound level <65 db (A)
3nine USA Inc.
P.O. Box 1046
EMMA™ 2500 4768 Hwy 123, South
Suitable for cabin size <20m3 San Marcos, TX 78666
Air flow 2 500m3/h Office: +1 512 667 6146
Operating conditions <50°C Fax: +1 512 355 4150
Power supply 16 A/400 V/3/50 Hz salesNA@3nine.com
Motor rating 5.5 kW www.3nine.com
Rated current 11.3 A
Weight 131 kg
Height 1 145 mm
Diameter Ø 670 mm
Inlet pipe Ø 316 mm
Sound level <70 db (A)
PETRA™ 1000
Suitable for cabin size <10m3
Air flow 1 000m3/h
Operating conditions <50°C
Power supply 16 A/400 V/3/50 Hz
Motor rating 1.5 kW
Rated current 3.2 A
Weight 96 kg
3nine is a Swedish company that develops solutions for the
Height 1 145 mm
purification of processed air for the Metal Working Industry.
Width Ø 500 mm Our revolutionary technology is based on centrifugal separation,
Inlet pipe Ø 160 mm using a disc stack which produces an extremely high degree of
Sound level <70 db (A) purification in a very compact format and requires a minimum of
maintenance.
