Scribd
Upload
111 views2 pages

Solenoid Valve

This document summarizes a 2/2 way normally closed solenoid valve with a pilot control. It has a minimum operating pressure of 0.1 bar and materials designed for maximum reliability. It can be used for automation and heating applications with pipes of G 3/4 size. The valve has various coil and seal options and a maximum allowable pressure of 16 bar.

Uploaded by

Heru Purwanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views2 pages

Solenoid Valve

This document summarizes a 2/2 way normally closed solenoid valve with a pilot control. It has a minimum operating pressure of 0.1 bar and materials designed for maximum reliability. It can be used for automation and heating applications with pipes of G 3/4 size. The valve has various coil and seal options and a maximum allowable pressure of 16 bar.

Uploaded by

Heru Purwanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Solenoid valve 2/2 way N.C.

21H9KV180
With pilot control

PRESENTA
PRESENTATION:
S.V. with pilot control for interception of fluids compatible with
the construction materials.
A minimum operational pressure of 0,1 bar is required.
The materials used and the tests carried out ensure maximum
reliability and duration.
USE: Automation
Heating

PIPES: G 3/4

COILS: 8W - Ø 13
BDA -BDS - BSA 155°C (class F)
BDP 160°C (high temperature)
BDF 180°C (class H)
SDH 180°C (class H)
12W - Ø 13
UDA 155°C (class F)
14W - Ø 13
GDH 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN
MATERIAL.
Max. allowable pressure (PS) 16 bar
Environment temperature:
with class F or high temperature coils - 10°C + 60°C
with class H coil - 10°C + 80°C

Gaskets Temperature Medium


Mineral oils (2°E),gasoline
V=FKM (fluoroelastomer) - 10°C +140°C
gas oil

B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water

E=EPDM
- 10°C +140°C Water, steam
(ethylene-propylene)

For seals other than FKM replace the letter “V” with the ones
corresponding to the other seals. E.I. 21H9KB180.

Ø Pressure
Pipe Max viscosity Kv Power
Code min M.O.P.D.
ISO 228/1
cSt °E mm l/min (watt) bar AC bar DC bar
8 3
G 3/4 21H9KV180 12 ~2 18 50 12 0,1 16 10
14 16

The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.

08-04-2004 ODE 21H9KV180


MATERIALS:
MATERIALS:
Body Brass - UNI EN 12165 CW617N
Weleded armature tube Stainless steel AISI series 300+
Brass - UNI EN 12165 CW617N
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400
Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal Standard: V=FKM
On request: B=NBR E=EPDM
Orifice Brass - UNI EN 12165 CW617N
On request:
Connector Pg 9 or Pg 11
Connector conformity ISO 4400
FEATURES:
FEATURES:
Electrical conformity IEC 335
Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.

SPARE
SPARE PAR
PARTS:
TS:
1. Coil: MAINTENANCE KIT:
KIT:
See coils list
KTG0H9KV18=2+4+5
2. Complete plunger:
Code R451284/V
3. Complete cover with
armature tube without gasket:
Code R452291
4. Gasket O-Ring:
Code R990105/V
5. Complete diaphragm:
Code R451220/V
DIMENSIONS:

COIL POWER ABSORPTION DIMENSIONS


W Inrush Hold TYPE D E F
VA ~ VA ~ mm mm mm
B 30
8W 25 14,5 42 54
S 32
12 W 35 25 U 36 48 60
14 W 43 27 G 52 55 67

21H9KV180 ODE 08-04-2004

You might also like