BILL 2A

Item Description Quantity Unit Rate Amount

SECTION B - SITE WORK

THE CONTRACTOR IS TO PRICE THE FOLLOWING

SECTION IN STRICT ACCORDANCE WITH THE
ARCHITECT'S AND ENGINEER'S DRAWINGS AND
SPECIFICATIONS

Demolition and Alterations

Cutting openings in existing structure including making good all

work damaged; all in accordance with drawings and
specifications

A to walls; access between bowling to terrace 3 m2 0.00

Retain and make good of existing doors; all in accordance with

drawings and specifications

B single leaf doors 3 no. 0.00

Relocate existing door including making good all work

damaged; all in accordance with drawings and specifications

C single leaf doors 1 no 0.00

Demolition of existing handrails including making good all work

damaged; all in accordance with drawings and specifications

D to stairs 10 m 0.00

Remove existing finishes including screed and making good all

work damaged; all in accordance with drawings and
specifications

E to floors at ground floor level 48 m2 0.00

F to stair steps 29 m2 0.00

G to ceiling 51 m2 0.00

H to walls 87 m2 0.00

To Collection 0.00

BILL 2A BILL 2A/ -Page: 1

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION B - SITE WORK (CONT'D)

Additional Items

The tenderer is to include for any additional items with

quantities and rates not previously included to complete build
up of the lump sum price for this section of the Works. Should
the tenderer fail to insert any items here, it will be deemed that
his lump sum price for the tender includes all items and no
subsequent claim for any additional item will be entertained
[Contractor shall provide details like drawings, measurements,
and other documents to support these additional items.]

To Collection 0.00

BILL 2A BILL 2A/ -Page: 2

BILL 2A

Item Description Quantity Unit Rate Amount

COLLECTION

Total Brought Forward from Page No.

BILL 2A/ -Page: 1 0.00

BILL 2A/ -Page: 2 0.00

Carried To Bill Summary Page 0.00

BILL 2A BILL 2A/ -Collection

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION C - CONCRETE WORK

THE CONTRACTOR IS TO PRICE THE FOLLOWING

SECTION IN STRICT ACCORDANCE WITH THE
ARCHITECT'S AND ENGINEER'S DRAWINGS AND
SPECIFICATIONS

Poured Concrete

Cement and sand leveling screeds; in power-float finish;

including reinforcement as required, preparation of in-situ
substrate, and/or movement joints as required and all
necessary fixings and accessories; all in accordance with
drawing no. L(0)08 and specifications

A Less than 100mm thick; to receive floor tiles, carpet and paint 809 m2 0.00

B More than 100mm thick; to receive floor tiles 1 m2 0.00

Cement and sand leveling plaster; including preparation of in-

situ substrate and/or movement joints as required, and all
necessary fixings and accessories; all in accordance with
drawings and specifications

C to walls 240 m2 0.00

Void former; including all necessary fixings and accessories; all

in accordance with drawing L(0)08 and specifications

D to raised floor; 310mm thick 116 m2 0.00

To Collection 0.00

BILL 2A BILL 2A/C -Page: 1

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION C - CONCRETE WORK (CONT'D)

Additional Items

The tenderer is to include for any additional items with

quantities and rates not previously included to complete build
up of the lump sum price for this section of the Works. Should
the tenderer fail to insert any items here, it will be deemed that
his lump sum price for the tender includes all items and no
subsequent claim for any additional item will be entertained
[Contractor shall provide details like drawings, measurements,
and other documents to support these additional items.]

To Collection 0.00

BILL 2A BILL 2A/C -Page: 2

BILL 2A

Item Description Quantity Unit Rate Amount

COLLECTION

Total Brought Forward from Page No.

BILL 2A/C -Page: 1 0.00

BILL 2A/C -Page: 2 0.00

Carried To Bill Summary Page 0.00

BILL 2A BILL 2A/C -Collection

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION E - METALWORKS

THE CONTRACTOR IS TO PRICE THE FOLLOWING

SECTION IN STRICT ACCORDANCE WITH THE
ARCHITECT'S AND ENGINEER'S DRAWINGS AND
SPECIFICATIONS

Structural Metalworks

Support frames to LED screens; 30x30x3mm thick SHS;

including all necessary fixings and accessories; all accordance
with drawing no. SD-B-L(4)02-03A and specifications

A to 3500 x 2000mm high LED screen 3 no 0.00

Support frames to LCD screens; 50x50x3mm thick SHS;

including 14mm dia threaded rod and all necessary fixings and
accessories; all accordance with drawing no. SD-B-L(4)02-03B
and specifications

B to LCD screen 6 no 0.00

Secondary steel support; including all necessary fixings and

accessories; all in accordance with drawings and specifications

C to receive suspended curtain wall 38 m2 0.00

D to receive suspended masking wall 38 m2 0.00

To Collection 0.00

BILL 2A BILL 2A/E -Page: 1

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION E - METALWORKS (CONT'D)

Additional Items

The tenderer is to include for any additional items with

quantities and rates not previously included to complete build
up of the lump sum price for this section of the Works. Should
the tenderer fail to insert any items here, it will be deemed that
his lump sum price for the tender includes all items and no
subsequent claim for any additional item will be entertained
[Contractor shall provide details like drawings, measurements,
and other documents to support these additional items.]

To Collection 0.00

BILL 2A BILL 2A/E -Page: 2

BILL 2A

Item Description Quantity Unit Rate Amount

COLLECTION

Total Brought Forward from Page No.

BILL 2A/E -Page: 1 0.00

BILL 2A/E -Page: 2 0.00

Carried To Bill Summary Page 0.00

BILL 2A BILL 2A/E -Collection

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION F - WOODWORKS

THE CONTRACTOR IS TO PRICE THE FOLLOWING

SECTION IN STRICT ACCORDANCE WITH THE
ARCHITECT'S AND ENGINEER'S DRAWINGS AND
SPECIFICATIONS

Composite Items

Pattresses plywood; built into adjoining structures (measured

separately); including all necessary fixings and accessories; all
in accordance with drawings and specifications

To receive overhead LCD panels and screen

A overall size 1680 x 965mm high 3 no 0.00

To Collection 0.00

BILL 2A BILL 2A/F -Page: 1

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION F - WOODWORKS (CONT'D)

Additional Items

The tenderer is to include for any additional items with

quantities and rates not previously included to complete build
up of the lump sum price for this section of the Works. Should
the tenderer fail to insert any items here, it will be deemed that
his lump sum price for the tender includes all items and no
subsequent claim for any additional item will be entertained
[Contractor shall provide details like drawings, measurements,
and other documents to support these additional items.]

To Collection 0.00

BILL 2A BILL 2A/F -Page: 2

BILL 2A

Item Description Quantity Unit Rate Amount

COLLECTION

Total Brought Forward from Page No.

BILL 2A/F -Page: 1 0.00

BILL 2A/F -Page: 2 0.00

Carried To Bill Summary Page 0.00

BILL 2A BILL 2A/F -Collection

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION G - THERMAL & MOISTURE PROTECTION

THE CONTRACTOR IS TO PRICE THE FOLLOWING

SECTION IN STRICT ACCORDANCE WITH THE
ARCHITECT'S AND ENGINEER'S DRAWINGS AND
SPECIFICATIONS

Waterproofing

Waterproofing; to include preparation of in-situ substrate;

including laps to walls and treatment around chases, angles,
upstands, kerbs, movement joints, penetrations, outlets, and all
necessary fixings and accessories; all in accordance with
drawing L(0)08 and specifications

A horizontally 43 m2 0.00

B turning ups; 150mm high 39 m 0.00

To Collection 0.00

BILL 2A BILL 2A/G -Page: 1

BILL 2A

Item Description Quantity Unit Rate Amount

SECTION G - THERMAL & MOISTURE PROTECTION

(CONT'D)

THE CONTRACTOR IS TO PRICE THE FOLLOWING

SECTION IN STRICT ACCORDANCE WITH THE
ARCHITECT'S AND ENGINEER'S DRAWINGS AND
SPECIFICATIONS

Insulation

Acoustic insulation; kinetic pads; including all necessary fixings

and accessories; all in accordance with drawings and
specifications

A generally 76 m2 0.00

To Collection 0.00
BILL 2A BILL 2A/G -Page: 2
BILL 2A

Item Description Quantity Unit Rate Amount

SECTION G - THERMAL & MOISTURE PROTECTION

(CONT'D)

Additional Items

The tenderer is to include for any additional items with

quantities and rates not previously included to complete build
up of the lump sum price for this section of the Works. Should
the tenderer fail to insert any items here, it will be deemed that
his lump sum price for the tender includes all items and no
subsequent claim for any additional item will be entertained
[Contractor shall provide details like drawings, measurements,
and other documents to support these additional items.]

To Collection 0.00