0% found this document useful (0 votes)
39 views1 page

K4 Electromechanical Pressure Switch

The document summarizes the technical specifications of the K4 electromechanical pressure switch. It can measure pressure ranges from -0.8 to 600 bar with an accuracy of ±5% and switching life of 106 cycles. It has adjustable switching pressure, IP54 protection rating, and electric contacts rated for 0.5A at 250V AC or 0.15A at 110V DC. The switch is available in multiple configurations with different material options, hydraulic connections, seal types, and electric contact variations.

Uploaded by

Filipe Quadros
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
39 views1 page

K4 Electromechanical Pressure Switch

The document summarizes the technical specifications of the K4 electromechanical pressure switch. It can measure pressure ranges from -0.8 to 600 bar with an accuracy of ±5% and switching life of 106 cycles. It has adjustable switching pressure, IP54 protection rating, and electric contacts rated for 0.5A at 250V AC or 0.15A at 110V DC. The switch is available in multiple configurations with different material options, hydraulic connections, seal types, and electric contact variations.

Uploaded by

Filipe Quadros
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

K4 Electromechanical pressure switch

HEX24

K4 P1

Technical features Regulation allen screw 2mm


Switching pressure range: From -0.8 Bar to 400 Bar
Maximum pressure: From 25 Bar to 600 Bar
Working temperature: -25°C ÷ +85°C
Hydraulic connection: Different threads (STD: ¼” BSP-M)
Zinc plated steel with key 24mm
Body material:
(AISI 316L or different BRASS on request)
Weight: 0,06 Kg
- Membrane execution ~ 10% of end of scale at 20°C
Fixed hysteresis value: - Piston execution ~ 20% of end of scale at 20°C
- Y Piston execution ~ 25% of end of scale at 20°C
Switching accuracy: ± 5% of end of scale at 20°C
Mechanical life: 106 cycles at 70 bar (1000 PSI) at 20°C
Tightening torque max: 50 Nm

Electric features
Maximum load: 0.5 A at 250 Volt AC, 0.15 A at 110 Volt DC
Type of electric contact: NO or NC
Electric protection acc. to EN 60529: P1 – IP54
Adjustment instructions
Other
- Special value of hysteresis
- CU-TR for Russian market
Also available: - UL-CSA for electric part only
- Separator (<10 bar) for corrosive and/or high
percentage of solid particles
Warranty: see dedicated page

F4. . . . . . . . . P1
Type of Type of
Switching P Hydraulic Body Type of Electric Setting Protection
Execution Electric Electric Condition
Pressure range Max Connection Material Seal contacts pressure Cap
Contact Connection
Bar Bar
R 0,2>2,5 Membrane 25

S 1>10 Membrane 25
0 X D
V
SM 1>10 Membrane 150 ⅛” BSP-M AISI316L Means
VITON
falling
1
SP 2>10 Piston 300 L pressure
¼” BSP-M T Indicate
BRASS setting, also
PTFE G the value Accessory
T 5>50 Piston 300 2 please
A Gold plated setting on request,
⅛”BSPT-M B indicate the
NO E contacts pressure, essential to
TM 5>50 Membrane 150 F NICKEL value
3 EPDM (if omitted also protect the
Fast-on PLATED
M10x1-M means indicate instrument
V 10>100 Piston 350 6.3x0.8 BRASS U
C 4
H standard the
Means
from dirty
VM 10>100 Membrane 150 NC HNBR contacts) condition and
⅛” NPT-M if rising
“D” or humidity
omitted pressure
Z 30>300 Piston 400 5 If “U”
means setting, also
¼” NPT-M omitted
zinc please
Y 50>400 Piston 600 means
6 plated indicate the
NBR
¼” BSPT-M steel value
ADJUSTABLE VACUUM SWITCH

WF4 -0,8>-0,15 Membrane 25

FOX s.r.l. Via Romagna,6 - 20090 OPERA (MI) Italy Tel. +39.02.57600033 e-mail: fox@fox.it
1 www.fox.it
Pressure Switch

You might also like