American Flag assembled with 1,184 Lee Spline Drive Bushings

proudly made
IN
THE USA
L E E R E L OLA
E EDPI R
NE G
C I SC
I OATA
N , I NLCO
. G 2022

www.leeprecision.com

2022_Catalog_1227_.indd 1 12/30/21 3:51 PM

 LEE LOADER

LEE LOADER LEE PRECISION, INC.

LEE LOADER SIZES

2-3
SIZING TYPE
Lee Loader | Reloading Basics
Classic Lee Loader 223 Remington 90232

4 Reloading Stand | Bench Plate More shooters have chosen the famous Lee 243 Winchester 90235
Loader for their first reloading tool than any 270 Winchester 90240
5 Modern Reloading II other. They realize it is all they need for good, 7.62x54 Russian 90243
accurate ammunition. In fact, at one time NECK SIZE 30/30 Win (30 Rem). 90244
Pistol Reloading Dies
6-7 Carbide Factory Crimp Dies
ammunition loaded with a Lee Loader held a
world record listed in the Guinness Book of
308 Winchester 90245
30/06 Springfield 90248
World Records for more than seven years.
8 Pistol Dies Size Chart
Millions upon millions of rounds have been 303 British 90247
reloaded with the famous Lee Loader. It’s the 45/70 Government 90264
Spline Drive Lock Rings
9 Shellholders perfect tool for those who wish to simply try FULL LENGTH 9mm Luger 90254
reloading, because it will pay for itself in just 38 Special 90257
10 Rifle Die Selection an hour or two. Find out for yourself how much NECK SIZE 357 Magnum 90258
The kit that started it all, fun it is to reload with the Lee Loader. Everything ‡44 Magnum 90260
11 Rifle Factory Cimp Dies The Classic Lee Loader you need to begin loading one caliber!
FULL LENGTH ‡45 ACP 90262
Rifle PaceSetter Dies ‡ Calibers requiring considerable force for sizing. LEE LOADER 45.98 NECK SIZE ‡45 Colt 90263
12-13 Rifle Collet | Ultimate Die Sets
R E L O A D I N G S E
14-15 Rifle Dies Size Chart
Reloading Press Overview
16-17 Single Stage and Progressive SIZE PRIME
Breech Lock Reloader | Breech
18 Lock Hand Press & Kit | Ram INSTALL
HANDGUN

Prime | Breech Lock Ram Prime REMOVING spent primer PRIMER

and RESIZING case can be
Breech Lock Challenger Press | accomplished by using Can be done
50th Anniversary Kit on press
19 Breech Lock Challenger Kit any reloading or by hand
Bench Prime Press Kit press
Classic Cast Press
20 50 BMG Press Kit

21 Classic Turret Press and Kit

On press:
Prime with
22 Value Turret Press and Kit Lever Prime System
pg 19

23 Progressive Press Accessories

24 Pro 1000 | Pro 4000 Breech Lock

Challenger Press
pg 19
25 Pro 4000 | Load-Master
The APP
26 Automatic Processing Press Pistol Sizing Die Hand Prime
with New
27 The APP Accesories Auto-Prime
pg 31
FULL COLLET
28 Quick Trim Dies | Case Trim Tools LENGTH or NECK TRIM
Quick Trim & Case Length
29 Gauge Charts | Bulge Buster Kit
FOR SAFETY
30 ACP Automatic Processing Press SAKE
Priming with
NOTICE CHECK CASES
Auto Bench Prime | Auto-Prime Lee Auto-Bench Prime
31 Priming Tool Kits | Shellholders
how the for proper
trim length.
pg 31
case neck
is sized Chamfer inside
Deluxe Perfect Powder Measure as case is case neck to
32 Perfect Powder Measure withdrawn allow easy bullet
Safety Scale | Powder Funnel from die installation.
Powder Measure Kit over the
Pro Auto Disk Powder Measure expander Case
33 Auto Drum Powder Measure Conditioning Kit
pgs 28– 29
RIFLE

34 Electric Melters

35 Lubrication and Sizing

Press Priming
with the
36 Rifle Bullet Molds Deluxe Lee ACP
Quick Trim, Automatic
trim and chamfer Case Primer
37 Pistol Bullet Molds Rifle Full Length Rifle Collet
simultaneously pg 30
Sizing Die Necksizing Die
LUBRICATE an No lube required. Cases pg 28-29
38 Black Powder Bullet Molds inspected, clean must be fired through
case. your gun only.
Slug Molds | Buckshot Molds |
39 Load-All II
LEE PRECISION, INC.
4275 HIGHWAY U
HARTFORD WI 53027
262 673 3075
2 www.leeprecision.com

2022_Catalog_1227_.indd 2 12/30/21 3:51 PM

ON, INC.
ReLOADING22 RELOADING BASICS

R ELOADING IS AN ENJOYABLE HOBBY, saves you

money — and no manufacturer saves you more than Lee
Precision, Inc. Our mission is simple: produce the best
American made value in reloading tools. Our great prices come
from patented, innovative designs. We are thankful to say that Lee
you how much and what type of powder to use. Dies and presses
last a lifetime, so buying what your budget allows makes the
most sense. For those with a workbench, consider our Lee Bench
Plate for the ultimate convenience in mounting your presses. If
you don’t have a workbench, consider the Lee Reloading Stand,
Precision products are cast, machined and assembled in the USA. compact and very sturdy. If you have no loading equipment and
A reloading press and a set of Lee Dies are all you need to start are just getting started, you must consider that these basic steps
reloading. Lee Dies come complete with powder dipper, shell holder need to be taken below.
and instructions, along with comprehensive load data that tells
Check out our complete line of reloading and casting equipment on our website, then visit your local merchant.
If not blessed with a local dealer, one of the many online dealers will quickly and economically fill your order.

G S E Q U E N C E

CHARGE SEAT & CRIMP

OPTIONAL
EXPAND CASE MOUTH AND
CHARGE POWDER.
Lee handgun dies are unique
in that you can charge
powder during
this operation

HANDGUN
Auto Drum Powder Bullet
Measure pg 33 Seating Die

HANDGUN
HANDGUN Carbide Factory Crimp Die
SEAT AND CRIMP Easy to adjust crimp and
Powder Through carbide ring post sizes the
Expanding Die THE BULLET
case. pg 7

CHARGE SEAT CRIMP

CHARGE POWDER
Powder Funnel and
Dippers pg 32

RIFLE
Easy Adjust
Dead Length
Bullet Seating
Die FACTORY
CRIMP DIE
In most circumstances
Deluxe Perfect Powder SEAT THE BULLET will improve velocity,
uniformity and in all
Measure pg 32 cases, factory-like
utility & dependability.
pg 11

www.leeprecision.com 3

2022_Catalog_1227_.indd 3 12/30/21 3:51 PM

 RELOADING STAND | BENCH PLATE LEE PRECISION, INC.

a c c e s s o r i e s
Lee Reloading Stand
At last, a reloading stand built just for your reloading needs. The sturdy
powder coated steel stand places your press at the perfect counter stool
or standing height. Three-leg design assures absolute stability regardless
of the floor condition. Rubber tipped legs suitable for any surface.
The thick steel top is fitted with the patented, quick
change Lee Bench Plate System with steel base block Die Rack
to fit all Lee metallic presses.
The stand also includes a sturdy steel shelf Sturdy steel rack with fasteners designed for the Lee
with two bench plate receivers that will Reloading stand. Conveniently holds your dies at the
neatly and securely store your extra ready, especially helpful when loading small batches
presses or mountable accessories. of ammo with frequent die changes. Can also be wall
Each leg has eight mounting holes or bench mounted.
that allow you to accessorize your 90680 15.00
stand with a multitude of bins,
shelves or accessory racks.
Dimensions 39” high x 26” wide x 24” deep
90688 190.00

Bin and Bracket

Sturdy steel bracket and parts bin. Includes fasteners
to allow direct mounting to the Lee Reloading stand,
or workbench. Perfect for holding bullets, cases and
loaded rounds.
90687 14.00

Concrete block not

Steel Base Block

Rigid, powder coated steel construction.
First choice for mounting all current Lee Presses.
Works with the Lee Reloading Stand and Bench Plate.
Fasteners for mounting one Lee reloading press
are included.
90267 16.00

CONCRETE BLOCK NOT INCLUDED

LEE BENCH PLATE

JUST REMOVE AND REPLACE

Includes steel base block with holes to mount

any Lee press. Powder coated, thick steel plate
mounts quickly and securely to any bench or
tabletop. Wide steel plate distributes load, adding
Patented design allows instant press change. So sturdy you can resize the monster
rigidity to the lightest bench top.
50 BMG case, then quickly switch to a smaller press for priming or other operations.
Trapezoidal base block slides into perfect register and made immoveable with the Lee Bench Plate 90251 36.00
quick tightening of four bolts.
4

2022_Catalog_1227_.indd 4 12/30/21 3:51 PM

ON, INC.
ReLOADING22 MODERN RELOADING 2 N D EDITION

2021 MODERN RELOADING

SECOND EDITION BY RICHARD LEE

LEARN TO RELOAD AMMUNITION

THAT’S MORE ACCURATE
THAN FACTORY NEW
ON YOUR FIRST TRY
The Second Edition of MODERN RELOADING is a sum-
mary of a lifetime of experience. No matter how
knowledgeable you are, you will find new and
interesting information in this book. It is a refer-
ence book you will keep forever.
OVER 38,000 LOADS covering over 170 cartridges in a
new, larger, easier to read format, with velocities for starting
loads. This is the best kind of load data — it is supplied by the
powder companies.
LOAD DATA SORTED by velocity decending order.
DIPPER, AUTO DISK DATA included for easy setup.
NEW, LARGER, EASIER TO READ FORMAT
with computer rendered and dimensioned drawings.
Cartridges tabbed for quick reference.
LATEST INFORMATION ON PRESSURE
EXCLUSIVE PRESSURE AND VELOCITY FACTORS
enable you to accurately calculate pressure and velocity for
reduced loads. An absolute necessity for cast bullet shooting.
A NEVER BEFORE PUBLISHED in depth analyses of
current load data. It gives you insight into the effects of
reducing or increasing a charge.
Modern Reloading Second Edition 90277 30.98

Contains everything about reloading,

with the world’s most comprehensive load data,
E over 38,000 loads
POWDER BURNING RATE CHART CHAP TER 10

7mm REmINGTON mAGNUm

N 2016
LEE PREC ISIO A NITRO100 1 HS7
VEC BA10 22 AR2208
2 VEC SP3 42
v-N310 22 VEC SP7
2 v-N105 42
WIN AA LITE 22 V-N530
2 ACCUR #9 42
TITEWAD 23 IMR4064 43
Prime e, 3 IMR 4166
Auto Bench New Auto Prim R COMPETITION 23 v-N135
adapters for the 7mm REmINGTON mAGNUm 3 ALNT 410 23 ACCUR 4064
44
n of the tray and was envision
ed · S TA R T I N G L O A D S
· wSUPER-TAR 4 HERC 2400 45
ed on the desig a product that 1 GRAIN FACTOR CLAYS
24 RELODER15 45
While we work be perfect for
ACCUR 4100
MIN
in the NEVER VELOCITY 5 25
with a small ad
START VOLUME AUTO LEE VELOCITY PRESS UNITS O A L IMR4320
e parts would VEC TU7000 45
FPS VELOCITY PRESSURE
FPS EXCEED H LIL GUN
duced the tool 5
POWDER TYPE DISK DIPPER
we realized thes
CC
rs
GRAINSS 25 H380
Prim e. We intro ess. Cust ome 115 Grain Jacketed Bullet
BULLSEYE 6 SR4759 47
Auto Bench an immediate
succ HP38
25 IMR 4007 SSC 47
years ago; the e, and it was quit e sure 64.5 3320 59500 PSI 3.200 .9870 .9641 7 R ENFORCER 25 VEC TU5000
eMan magazin I am 4.30 3157 RAM ZIP 47
ntly it works. IMR 4007 SSC 60.6 4.39 NA .9660 7 v-N110
aMerican rifl ly and convenie tless H4350 62.0 4.50 NA 4.30 3089 66.0 3281 59006 PSI 3.200 .9850 WIN 231
25 v-N140 47
how effortless tool is so effor 59123 PSI 3.200 .9863 .9756 7 ALNT 300 MP 26 RAM BIG GAME
are amazed at ing tool. The 59.0 3.90 NA 3.70 3071 63.5 3267 SOLO 1000 H110 48
t popular prim to use, even the
oldest H414 59358 PSI 3.200 .9869 .9716 8 26 ACCUR 2700
become our mos 69.7 3257 ALNT E3 WIN 296 49
will 65.0 4.71 2 SCOOPS 2.20 3060 8 26 H414
this tool s easi ly H4831
56.5 3245 49800 PSI 3.200 .9839 .9702 IMR 700X H4227 49
arthritic hand H-VARGET 53.0 3.87 NA 3.70 3068 ACCUR #2
8
IMR4227
27 v-N540 49
. While 120 Grain Jacketed Bullet
9 27 RELODER 17
operate the lever PSI 3.285 ---- ---- RED DOT 9 AR2205 27 IMR4350
50
Auto RAM MAGNUM 71.1 4.70 2 SCOOPS 2.20 3021 79.0 3357 56430 TITEGROUP ACCUR 5744 50
we call it the .9867 .9689 9 28 AR2209
3327 59600 PSI 3.230 MS200 50
Useful case capacity 5.27 cc 60.0 4.36 NA 4.30 3092 65.5 9 ACCUR 1680
mounting HYBRID100 ---- 29 v-N150
Bench Prime,
· S TA R T I N G L O A D
S ·
59900 PSI 3.260 ---- WIN AA PLUS 50
1 GRAIN FACTOR 64.2 4.80 2 SCOOPS 2.20 2926 71.3c 3325 9 LT-32 29
MIN NORMA 203B
NEVER VELOCITY UNITS
boar d ACCUR 3100 ---- ---- IMR TRAIL BOSS 50
it to ¾
START VOLUME AUTO LEE VELOCITY PRESS OAL 58290 PSI 3.200 v-N120
POWDER TYPE CC DISK DIPPER FPS EXCEED FPS VELOCITY PRESSURE
a inch R HUNTER 60.4 4.03 NA 4.00 2970 67.1 3300 10 30 NORMA 204
GRAINSS
59500 PSI 3.230 .9840 .9543 WIN SUPER HANDI 11 LT-30 50
100 Grain Jacketed Bullet portable, IMR 4007 SSC 60.0 4.35 NA 4.30 3085 63.8 3278 31 WIN 760
.9633 makes it very NA 4.00 3126 64.5 3261 59475 PSI 3.230 ---- ---- ROYAL SCOT 12 H4198 31 WIN 572
50
72.0c 3592 59400 PSI 3.150 .9842 test of H414 61.0 4.03 .9635 AMER-SELECT IMR4198 50
IMR4831 67.0 4.92 2 SCOOPS 2.20 3318 .9613 and the ligh 72.5 3261 59100 PSI 3.230 .9848 12 31 ACCUR 4350
70.5 3569 59000 PSI 3.150 .9836 IMR7828 68.0 4.93 2 SCOOPS 2.20 3044 .9635 INTERNATIONAL 12 AR2207 51
66.0 4.85 2 SCOOPS 2.20 3312 lap will 3251 59000 PSI 3.230 .9858 31 H4350
tables or your
IMR4350 58700 PSI 3.150 .9875 .9720 62.0 4.56 NA 4.30 3050 66.5 v-N320 VEC TU2000 51
68.0 3547 IMR4350 ---- 12 31
HYBRID100 62.0 4.50 NA 4.30 3290 .9561 tool, 68.5 3236 59358 PSI 3.230 ----
wSUPER-LIT NORMA URP 51
59400 PSI 3.150 .9827 is no 2.20 3095 NORMA 200
suffice. There
61.2 3538 H4831 65.0 4.71 2 SCOOPS
.9692 12 31 v-N550
57.0 4.15 NA 4.00 3288 68.2 3231 58500 PSI 3.230 .9855 GREEN DOT 52
IMR4895 58600 PSI 3.150 .9865 .9653 64.0 4.70 2 SCOOPS 2.20 3040 13 ACCUR 2200
61.5 3528 ben chIMR4831 32 HYBRID100
han d held or
57.0 4.25 NA 4.00 3318 58771 PSI 3.230 ---- ---- AS50 53
IMR4064 .9660 65.0 3226 13 RELODER 7
66.0 3499 57598 PSI 3.150 .9859 62.0 4.50 NA 4.30 3106 32 R HUNTER
60.0 3.97 NA 4.00 3216
is fasterH4350 59710 PSI 3.230 .9843 .9707 R SILHOUETTE 13 H322 53
mounted, that
H414 ---- 57.0 3218 33
2.50 3316 75.0c 3499 59006 PSI 3.150 ----
H-VARGET 53.0 3.87 NA 3.70 3021 ---- ---- IMR PB v-N160 54
71.0 5.15 2 SCOOPS 57800 PSI 3.260 14 ACCUR 2015
H4831 58185 PSI 3.150 .9885 .9748 veni entACCUR 4350 56.7 4.20 NA 4.00 2829 63.0 3215 34 ACCUR 3100
H4350 65.0 4.71 2 SCOOPS 2.20 3334 69.0 3494
.9625 or mor e con NA 4.00 3062 58.2 3212 59400 PSI 3.230 .9887 .9715 R TRUE BLUE 14 ALNT AR-COMP 34 ALNT 4000 MR
55
59.0 3487 58419 PSI 3.150 .9854 ee AutoIMR4064 54.0 4.02 WIN ACTION PI BENCHMARK 55
than the L
53.0 3.87 NA 3.70 3193 58700 PSI 3.230 .9884 .9704 14 35 RELODER19
H-VARGET ---- ---- 3.70 3049 57.9 3189 55
75.0c 3421 54100 PSI 3.150 54.0 3.93 NA ACCUR #5 15 IMR3031
IMR7828 72.0 5.22 2 SCOOPS 2.50 3267
PSI 3.280 ---- ---- # 90700 h Prim e. The toolIMR4895 Grain Jacketed Bullet v-N330 ACCUR 2230
35 H450 55
65.3 4.88 2 SCOOPS 2.20 2964 72.5c 3368 58800
Auto Bench Prime Benc 130 15 36 H4831 55
ACCUR 3100 ---- ---- e is no NA 3.285 ---- ---- UNIQUE RELODER 10
holders, so ther
3345 60300 PSI 3.280 70.0 3314 NA 17 36 IMR4831
60.3 4.46 NA 4.30 2944 67.0 61.6 4.29 NA 4.30 2956
ACCUR 4350 ing tool shell RELODER22 NA NA 3.285 ---- ---- UNIVERSAL 17 X-TERMINATOR 36
55
pensive prim 69.0 3270 AR2213
Jacketed Bullet s. 60.7 4.29 NA 4.30 2916 SR7625 55
e standard inex
110 Grain NORMA 201
reloading pres
RELODER19 NA 3.200 ---- ---- 17 36
63.5 3255 NA H-SUPRFORM
3535 NA NA 3.200 ---- ----
uses the sam ers from your a tray RELODER 17 55.9 3.89 NA 3.70 2903 VEC BA9 v-N130 56
h prime uses
68.0
swap shell hold
59.8 4.17 NA 4.00 3152 59300 PSI 3.185 .9858 .9695 17 37 v-N560
RELODER 17 3159
The Auto Benc
---- ---- 65.0 4.71 2 SCOOPS 2.20 2943 70.0 IMR 4451 56
need to endlessly
75.0 3503 NA NA 3.200 IMR7828 .9682 18 ACCUR 2460 38
66.0 4.60 2 SCOOPS 2.20 3124 how PSI 3.185 .9867 NORMA 217
Lee users know HYBRID100
RELODER22 ---- ---- NA 4.00 2931 62.5 3157 59000 POWER PISTOL VEC SP10 57
NA 3.200 57.0 4.14
to feed primers.
74.0 3489 NA ---- 18 38 SUPRM780
RELODER19 65.1 4.60 2 SCOOPS 2.20 3111 is 3155 59000 PSI 3.245 ---- CFE PISTOL BL-C(2) 57
59500 PSI 3.250 .9870 .9678 a tray ACCUR 3100 61.0 4.56 NA 4.30 2776 67.8
enient using
68.0 3465 .9691 18 39 WIN MAG RIFLE
HYBRID100 62.0 4.50 NA 4.30 3203 .9649 and conv 64.0 3131 59300 PSI 3.185 .9863 HS6 18 CFE 223 57
71.3 3456 59700 PSI 3.250 .9858 fast er tube IMR4350 60.0 4.41 NA 4.30 2964
.9732 39 RELODER22 58
IMR4831 67.0 4.92 2 SCOOPS 2.20 3249 filling a prim 66.3 3125 59800 PSI 3.185 .9884 MP200 18 H-LVR
compared to
60000 PSI 3.250 .9855 .9592 62.0 4.56 NA 4.30 2971 39 VEC TU8000
67.5 3452 IMR4831 .9697 VEC AO 59
IMR 4007 SSC 63.5 4.60 2 SCOOPS 2.20 3256 .9649 . The new tray 61.0 3122 59500 PSI 3.185 .9859 18 v-N133 39 v-N165
59000 PSI 3.250 .9854 at a time 57.3 4.15 NA 4.00 2964 59
65.0 4.78 2.20 3205 69.8 3442
one prim er IMR 4007 SSC
58400 PSI 3.245 ---- ---- v-N340 18 WIN 748
IMR4350 2 SCOOPS
---- is a 62.0 3108 39 IMR7828
our priming tools ACCUR 4350
65.5 3395 59123 PSI 3.250 ---- 55.8 4.13 NA 4.00 2735 .9666 AUTOCOMP ACCUR 2495 50
NA 4.00 3250 59592 PSI 3.185 .9879 18 40
H414 62.0 4.10
75.0c 3386 56700 PSI 3.250 ---- ---- included with ng tray 58.0 4.21 NA 4.00 2953 61.5 3082 SOLO 1500 19 ALNT VARMINT
NORMA MRP 60
licity. The foldi
72.0 5.22 2 SCOOPS 2.50 3230 H4350 57950 PSI 3.185 ---- ---- 40 ACC MAG PRO
IMR7828 .9754 61.0 3064 61
56.0 4.17 NA 4.00 3214 60.5 3369 59400 PSI 3.250 .9895 marvel of simp rate cove r
H414 59.0 3.90 NA 3.70 2985
3051 58888 PSI 3.185 ---- ----
HERCO
IMR 800X
19 RELODER12 40 IMR 7977 62
IMR4064 58302 PSI 3.250 .9908 .9759
ire a sepa 63.0 4.57 NA 4.30 2952 66.0 19 H335 40
H4831 68.0 4.93 2 SCOOPS 2.20 3213 73.0c 3367
---- ---- does not requ ce to
H4831
48.4 3.42 NA 3.40 2719 55.0 3049 NA NA 3.285 ---- ----
SR4756 IMR 8208 XBR
H1000 62
in flipping surfa RELODER15
68.5 3357 58067 PSI 3.250 .9618 19 40 RAM MAGNUM
65.0 4.71 2 SCOOPS 2.20 3233 59600 PSI 3.185 .9860 62
and has a built
H4350 .9736 55.4 3048 VEC SP8 19 AR2206
3174 58.5 3356 59006 PSI 3.250 .9878
The cove r
IMR4064 52.0 3.87 NA 3.70 2904 ---- 40 RELODER 25 63
54.0 3.95 NA 3.70 primers. 2998 57950 PSI 3.185 ---- v-3N37 19 RAM TAC
quickly right your
H-VARGET 58800 PSI 3.250 .9890 .9718 51.0 3.73 NA 3.70 2877 54.0 40 H RETUMBO
NA 4.00 3210 59.9 3350 valv e.
H-VARGET wSUPER-FLD VEC SP9 63
56.0 4.08 off ” 19 40
les as an “on/
IMR4895 ---- ---- ACCUR 8700
58.0 3256 NA NA 3.200
doub 139 Grain Jacketed Bullet ACCUR #7 NORMA 202 64
51.0 3.60 NA 3.40 2904 g primer tray latch 20 40
RELODER15 Foldin in seconds. 3100 3092 58200 PSI 3.270 ---- ----
BLUE DOT v-N170 64
begin priming 61.2 4.58 2 SCOOPS 2.20 2721 68.0 20 H4895
115 Grain Jacketed Bullet and ACCUR ---- ---- 41 H870
ers PSI 3.270 v-N350 65
st box of prim ACCUR 25204
.9692 than 61.0 3028 54900
are priced less ACCUR 4350
58500 PSI 3.200 .9870 54.9 4.06 NA 4.00 2665 20 42
from the large
4.30 3102 66.0 3354 LONGSHOT H 50 BMG
two packs. They
60.0 4.36 NA H-VARGET 66
HYBRID100
You can refill offer them in re works so well 140 Grain Jacketed Bullet ALLIANT STEEL
21
IMR4895
42 HO US869 66
trays we ff featu 3.270 ---- ---- 22 42
If you want extra
PSI
e = European The on/o 73.7 3220 60300
CAUTION with NEVER EXCEED LOADS, maintain
Minimum Overall Length or larger
your Auto-Disk Powder Measure
c = Compressed charge
char ge for a cover alone. ACC MAG PRO 66.3 4.40 NA 4.30 2952
3173 NA NA 3.280 ---- ----
DBLD = Double Disk. See instructions with to 62.9 4.45 NA 4.30 2830 71.5
what we used ses.
NA = None Available
2 SCOOPS = Use TWO dippers of powder
in each round.
all of our pres RELODER 25 NA 3.268 ---- ---- 111
folding tray on NA 4.00 2795 67.3 3169 NA
Lee Precision, Inc. Hartford WI 53027 59.3 4.09
we now use the
Copyright 08-09-2011 v-N560 60300 PSI 3.240 ---- ----
64.0 3144
R HUNTER 55.8 3.72 NA 3.70 2787 .9867 .9677
2895 63.0 3138 59800 PSI 3.250
HYBRID100 57.0 4.14 NA 4.00
58000 PSI 3.250 .9877 .9676
4.46 NA 4.30 2976 69.3 3134
SUPRM780 65.1
e = European
Minimum Overall Length or larger
CAUTION with NEVER EXCEED LOADS, maintain Measure c = Compressed charge
DBLD = Double Disk. See instructions with your Auto-Disk Powder NA = None Available
3:57 PM each round.
SCOOPS = Use TWO dippers of powder in
2 5/11/16
Copyright 08-09-2011 Lee Precision, Inc. Hartford WI 53027

5
25
NewCh apter2016.indd

www.leeprecision.com

2022_Catalog_1227_.indd 5 12/30/21 3:51 PM

 PISTOL RELOADING DIES

PISTOL RELOADING DIES LEE PRECISION, INC.

SELECTING THE BEST HANDGUN DIE SET

Lee handgun dies feature a carbide sizing die —
simply the best way to resize straight walled handgun cartridges.
Select the Deluxe Pistol 4-die set when using mixed range brass. The Deluxe Set includes the Carbide
Factory crimp die. This die allows you to separate bullet seating from the crimping operation. It makes setup much
easier and the die has the added feature of a carbide resizer that does a finishing sizing pass on the completed round.
This final sizing guarantees that any case that passes through the die will freely and reliably chamber in any gun.
The carbide & steEl three die sets work fine when using a quality controlled source of brass, like cases
fired only in your gun. More care is required when adjusting the bullet seat and crimp die, as seating and crimping
occur simultaneously. Bullet diameter control is important when not using the factory crimp.

Lee Dies reload cartridges better, easier, more accurately and with fewer problems! Pre-adjust and color code
your dies with
spline drive bushings
CARBIDE FACTORY CRIMP
DIE carbide
factory
crimp die
Carbide ring in base resizes any
portion of case that exceeds fac-
tory new dimensions. Floating
crimp ring is finger adjustable
to provide the perfect crimp.

HARDENED
STEEL
SHELLHOLDER
Others charge $15.00 for this item!

Exclusive feature to Lee

POWDER MEASURE
& CHARGE TABLE

Exclusive feature to Lee

POWDER
THROUGH
EXPANDING DIE
Only Lee Dies permit
charging the case while fitt
expanding the case mouth. to
Every Lee Pistol Die Set includes
this Powder Through
Expanding Die at no extra
cost. The powder funnel adapter RELOADING DIES shown with
CONTOUR GROUND BULLET SEAT
can be replaced with a Lee case COLOR CODED SPLINE DRIVE BUSHINGS installed. CARBIDE SIZING DIE & FEED DIE
actuated Powder Measure See page 8
(pg. 33) for fully automatic Carbide Sizer
powder charging while the case
All Lee straight walled pistol dies have tungsten
Bullet Seat
mouth is being expanded.
carbide sizer rings. Carbide is so hard that it can
and Feed Die
Universal free floating
only be ground and polished with diamond wheels.
seating plug works with
This hard diamond polished surface eliminates
nearly any point style bullet.
the need for case lubrication—they will never
No need to change seater
wear out. Exclusive contour grind sizes closer to
plugs for different nose
the rim than any other brand.
types. Finger adjustable
The collet held decapper is nearly unbreakable
LEE even if you misadjust it or deprime crimped
seating depth eliminates
exclusive military cases.
fumbling with pliers, lock
feature The decapper clamp collet accurately centers
nuts and screwdrivers to
make simple seating depth
the decapper in the die. Should you over stress
adjustment. Die is tapered on
it for any reason, it harmlessly slides up without
end for use with automatic
breaking. Easily reset with no limit to the amount
bullet feeders.
of times it can be reset.

ONLY LEE DIES COME COMPLETE WITH POWDER MEASURE and CHARGE TABLE

2022_Catalog_1227_.indd 6
PISTOL R
12/30/21 3:51 PM
ON, INC.
ReLOADING22 PISTOL RELOADING DIES

P I STO L D I E S E TS
Lee Deluxe Pistol 4-Die Set
INCLUDES CARBIDE FULL LENGTH SIZING DIE, POWDER THROUGH
77.00
CARBIDE
EXPANDING DIE, BULLET SEAT AND FEED DIE AND CARBIDE
FACTORY CRIMP DIE.
Combines the world’s most popular carbide three-die set with
FACTORY CRIMP DIE
the Lee Carbide Factory Crimp Die at a great price. No other
Lee Carbide Factory Crimp Die
die set at any price produces more reliable or accurate ammo.
By separating the seating and crimping operation, you will A CARBIDE SIZER SIZES THE cartridge
benefit by greatly simplified adjustment. More importantly, the while being crimped, so every round will
positively chamber freely with factory like
Carbide Factory Crimp Die post sizes your case, assuring that
dependability. The adjusting screw quickly
any round that passes through the die will chamber properly in
and easily sets the desired amount of crimp. It
your gun. This, plus all the other exclusive features — make this is impossible to buckle the case as
the best die set money can buy! with a conventional bullet seating
die. Trim length is not critical so
Lee Carbide Pistol 3-Die Set 55.98 this extra operation takes less
INCLUDES CARBIDE FULL LENGTH SIZING DIE, POWDER THROUGH time than it would if cases were
EXPANDING DIE AND BULLET SEAT AND FEED DIE.
trimmed and chamfered.
We use a solid carbide insert, ground to a special contour that does Revolver dies roll crimp with no limit as
not leave the objectional belt mark on the case, common to ordinary to the amount. A perfect taper crimp
carbide dies. With a carbide sizer, no case lube is needed, and you is applied to auto-loader rounds. The
don’t even have to clean your cases. crimper cannot be misadjusted to make
NO NEED FOR A TAPER CRIMP DIE; a case mouth too small to properly
BETTER ACCURACY WITH LEE DIES. head-space. A firm crimp is essential for
dependable and accurate ammunition—it eliminates INCLUDED +with+
DELUXE
Taper crimp dies are used to correct the problems caused by the
improper expanding plug design or adjustment. They distort the the problems of poor ignition of slow burning magnum

4-DIE SETS
powders.
bullet shank and reduce accuracy. Because the Lee Expander flares
the minimum amount, consistent with easy bullet insertion, all of CARBIDE FACTORY CRIMP DIE
the flare is removed with the bullet seating die, thus eliminating 28.98
the need for a taper crimp die.

SHORT BOTTLE NECK

FACTORY CRIMP DIE

FACTORY CRIMP DIE

FOR HANDGUN

CRIMP STYLE

CARBIDE FACTORY
Lee Steel Pistol 3-Die Set

TAPER CRIMP DIE

55.98
AMMUNITION

COLLET STYLE

COLLET STYLE
INCLUDES STEEL FULL LENGTH SIZING DIE, POWDER THROUGH

CRIMP DIE
THAT MUST WORK
EXPANDING DIE, BULLET SEAT AND FEED DIE, AND
RESIZING LUBRICANT PACKET
Same features as our premium carbide sets, except the case
must be lubricated. 5.7x28 FN N/A 90725 N/A N/A
22 TCM N/A 90087 N/A N/A

STORAGE IS EASY 30 M1 Carbine · 32/20 N/A N/A 90421 N/A

Lee Dies are packed in a 30 Luger N/A 90175 N/A N/A

fitted box that allows dies to be returned 30 Tokarev & 30 Mauser N/A 90086 N/A N/A
to the box adjusted with or without the
Lee Breech Lock bushing 32 ACP · 32 S&W Long
OR SPLINE DRIVE bushing INSTALLED 32 H&R Mag · 327 Federal
ROLL 90067 N/A N/A N/A

9mm Makarov TAPER 90807 N/A N/A N/A

9mm Luger TAPER 90860 N/A N/A 90780
Taper Crimp Die 357 Sig N/A 90076 N/A N/A
The Lee Taper Crimp
Die is hardened steel, 38 Super & 38 ACP TAPER 90866 N/A N/A 90780
designed to overcome 380 Auto TAPER 90867 N/A N/A 90780
crimp problems caused
by poor die design. These 38 Special ROLL 90861 N/A N/A 90781
dies offer little or no advantage when used 357 Magnum ROLL 90861 N/A 90813 90781
with 1986 or newer Lee Dies. Jacketed
bullets must have a crimp groove. 40 S&W & 10mm Auto TAPER 90862 N/A N/A 90782

TAPER CRIMP DIE 13.98 41 Magnum ROLL 90416 N/A N/A N/A
Short Bottle Neck 44 Special ROLL 90863 N/A N/A 90784
Collet Style Collet Style 44 Magnum ROLL 90863 N/A 90930 90784
Factory Crimp Die Factory Crimp Die
Incorporates a collet to apply Popular with cast bullet 44 Russian ROLL 90863 N/A N/A N/A
a rifle type crimp to the case. shooters that wish to use 45 Colt ROLL 90865 N/A 90302 90786
Makes these very difficult to oversize bullets; also very
crimp cartridges a delight to popular when reloading 45 ACP · 45 Auto Rim · 45 GAP · 45 Win Mag TAPER 90864 N/A N/A 90785
reload. Bullets do not need a heavy recoiling revolvers. 400 CorBon N/A 90173 N/A N/A
crimp groove, as the collet is so No other crimping system can apply as secure
powerful it will form one. a crimp at the Lee Collet style Factory Crimp 455 Web Mark II N/A N/A N/A 90785
BOTTLE NECK PISTOL Die. No crimping groove required in jacketed 454 Casull ROLL 90865 N/A N/A 90786
FACTORY CRIMP DIE or cast bullets, this die is so powerful it forms
a crimp groove if one is not present. 460 S&W N/A N/A 90926 N/A
25.00
COLLET STYLE CRIMP DIE 15.98 500 S&W N/A N/A 90931 N/A

www.leeprecision.com 7

PISTOL RELOAING
2022_Catalog_1227_.indd 7 12/30/21 3:51 PM
 DIES

LEE PISTOL DIES LEE PRECISION, INC.

| P 31
POWDER THROUGH EXPANDING DIE

| P9
FREE

| P7

| P7

PRIMING TOOL SHELLHOLDER

| P 28
SHELLHOLDER

| P 29

UNIVERSAL SHELLHOLDER
| P7
DELUXE PISTOL 4-DIE SET

COLLET STYLE CRIMP DIE

| P7
included where shown

| P7
| P7

QUICK TRIM DIE BODY

The price of Lee Dies include a FREE

CASE LENGTH GAUGE

FACTORY CRIMP DIE
CARBIDE 3-DIE SET
SHELL HOLDER of the proper size.

TAPER CRIMP DIE

SIZING DIE ONLY
STEEL 3-DIE SET
Some manufacturers charge $15.00
extra for this necessary part.

77.00 55.98 55.98 29.98 14.98 13.98 20.00

– 8.00– 16.00–
28.98 15.98 13.00 5 .98 3.98 20.00
22 TCM [ 2-Die Set ] 90803 91032 N/A 90087 90521 90204 91373
5.7 x 28 [ 2-Die Set ] 90603 91129 N/A 90725 90219 90002 90017 91363
25 ACP 90568 91204 91141 90002 90017
30 M1 Carbine 90626◊ 90617◊ 90494 90421 90135 90524 90207 90365
HAVE A
BREECH LOCK
30 Luger 90754 91212 91142 90175 90004 90023
PRESS?
30 Mauser 90755 91213 91142 90086 90004 90023 Breech lock bushings
7.62 Tokarev 90769 91214 91142 90086 91336 90004 90023 fit all Lee Breech
Lock presses. Allows
32 ACP 90622 90621 91144 90067 91338 90524 90207
instant, accurate die
32 S & W 90696 90621 91144 91311 90521 90204 changes.
32 S & W Long � 90624 90621 90490 90067 90169 90521 90204 Breech Lock
90809 90621 90490 90067 91310 90521 90204 Bushings
32 H & R Mag /327 Federal 91303
32/20 90751 91221 91145 90421 90146 90523 90206 WORKS O
90600 2-Pk 12.98
38/40 90761 91215 91146 90852 90001 90272 TIGHT
Perfect with TOOLHEA
9mm Makarov 90176 91206 91147 90807 90684 90004 90023 90181 Lee Lock Rings

9mm Luger 90963 90509 90548 90580 90780 90860 90153 90004 90023 90032
357 Sig 90270 91216 91148 90076 91317 90004 90023
38 Short / Long Colt 90276 91207 91149 91321 90518 90201
38 Super / 38 ACP 90623 90619 91168 90780 90866 90217 90004 90023
380 Auto 90447 90625 90618 90492 90780 90867 90155 90521 90204 90025 Spline Drive
38 S & W 90569 90619 91149 90156 90518 90201 Bushings
90157 90085 Breech lock quick change
38 Special /357 Magnum � 90964▼ 90510 90530 90581 90781 90861 90158 90518 90201 90088 bushing with integral
lock collar provides
40 S & W / 10mm Auto 90965▼ 90799 91208 90620 90782 90862 90154 90004 90023 90033 unmatched precision
90127 90193
and convenience when
41 Mag 90628 91220 91169 90416 90159 90526 90209 90226 adjusting dies. Split
429 Desert Eagle 90796 91504 91171 90528 90211 clamp positively locks die
into position.
44 Special / 44 Magnum 90966▼ 90516 90531 90583 90784 90863 90160 90528 90211 90107 90063 2-Pk
90161 90125
16.00
44 Russian 90293 90531 91152 90863 90528 90211
Buy more
44/40 90564 91217 91153 90854 90168 90001 90272 for greater savings
45 Colt 90967# 90514# 90533 90586 90786 90865 90302 90163 90528 90211 90145
45 ACP 90968 90513 90532 90585 90785 90864 90162 90519 90202 90073
45 Auto Rim 90808 90532 90585 90785 90864 90199 90213 90042 3-Pk
45 Schofield 90323 90533 91154 90785 90001 90272 21.00
400 Cor Bon 90430* 91218 91155 90173 90519 90202
455 Web Mark II 90764 90533 91156 90785 90522 90205
45 Win Mag 90810 90532 90585 90785 90864 90520 90203 90095 4-Pk
26.00
454 Casull 90795 90533 90586 90786 90865 90992 90528 90211 90174
45 Gap 90498 90532 91156 90864 91473 90519 90202
COLOR CODED
FOR QUICK,
460 S & W 90344 91209 91157 90926 90220 90001 90272 POSITIVE DIE
SELECTION
480 Ruger ‡ 90499 91210 91158 91242 90018 90522 90205
50 Action Express 90329 91219 91159 91327 90528 90211
500 S&W Mag 90288 91211 91159 90931 90019 90003 90200 90178

� Can be used to load magnum cases � Can be used to load maximum cases ▼Includes load data for magnum cases ‡ can be used to load the 475 Linebaugh #can be used to load the 454 Casull
*These dies do not include load data ◊ 30 M-1 Carbine $14.00 extra
S/O Special Order Factory Direct
8

2022_Catalog_1227_.indd 8 12/30/21 3:51 PM

 DIES

ON, INC.
ReLOADING22 SPLINE DRIVE BUSHINGS | LOCK RINGS

LEE ULTIMATE SPLINE DRIVE BIG GUN INSPIRED

LOCK RINGS BREECH LOCK QUICK CHANGE
are the perfect choice when using older style presses STANDARD ON ALL
that require screwing your dies in and out for every LEE SINGLE STATION PRESSES
Switch dies with a ⅙ of a turn rather than fourteen or more turns.
operation. The new split clamp spline drive makes all Loading with a breech lock equipped press is as convenient as
other lock rings obsolete and clumsy to use. a Turret Press when loading small quantities of ammunition.
Interrupted three-start thread assures dies will return and lock
The socket head cross bolt, even when lightly tightened, into the exact same position. If cost is more important than
applies a vise-like grip on your dies. No tiny set screws that convenience, you can leave the Breech Lock bushing locked in
easily strip or damage your die threads. the press and screw dies in and out like a conventional press.

We added the famous Lee “O” ring because, no matter how securely you Spline Drive Bushings
Change dies Breech lock quick change bushing with integral
have the lock ring clamped to the die, it will loosen in the press frame during instantly
lock collar provides unmatched precision and
with a twist
operation without the friction of the “O” ring. The “O” ring allows you to finger of the wrist convenience when adjusting dies. Split clamp
positively locks die into position.
tighten into your press and will
90063 2-Pk
never loosen during operation. 16.00
Kit includes a wrench for easy
die removal. Buy more
for greater savings
Ultimate Lock Rings
90566 3 pack with wrench 12.98 90042
91640 4 pack color coded. Lock ring wrench sold separately 16.98 3-Pk
Breech Lock Bushings 21.00
Lock Ring Wrench Breech lock bushings fit all Lee Breech
Lock presses. Allows instant, accurate
90093 3.98 die changes. 90095
4-Pk
A handy, compact wrench makes the new lock rings a delight 90600 26.00
to use. Spline drive lock rings are now standard equipment 2-Pk. 12.98
Color coded for quick,
on all Lee dies. Update older Lee Dies or competitor’s dies. positive die selection
Decapping Die
SPLINE DRIVE Lock RingS (3-Pack) An absolute must for those who clean cases before reloading.
90534 Lock ring wrench sold separately 5.98 No cleaning or lubing needed when using this die. Tough, almost
unbreak­able decapper easily removes crimped in primers. Fits cases
NOW STANDARD ON ALL LEE DIES. These lock rings are up to .560” in diameter; up to 3.125” long.
WORKS ON perfect for presses equipped with Quick change die bushings 90292 15.98
TIGHT or removeable die heads found on most progressive and REPLACEMENT DECAPPER
TOOLHEADS UNGUIDED 90783 2.50
our turret presses. Smallest GUIDED 4.00
outside diameter lock rings available. Captive For smooth operation and less decapper bending or breaking,
order caliber specific guided decapper.
friction “O” ring provides immovable die 91574 17 CAL-204 RUGER 91580 30 CAL
position with just finger tightening. Handy, no 91576 22 CAL 91581 34–35 CAL
91577 6mm–25 CAL 91583 40 CAL
tool required die adjustment. 91578 27 CAL -7mm 91584 45 CAL

Universal Case Expanding Die

for HOLDER PISTOL
SHELL Gently flares the case mouth to accept cast bullets without shaving. Works great to prevent
HOLDER PRESSES 15 5.7 x 28 damaging the moly and low friction coatings found on today’s high performance jacketed bullets.
5.98 1 22 Rem. Jet Includes neck plugs for .22 cal through .45 cal. Works on everything from the 22 Hornet to the
15 25 ACP largest Ultra Mag. Costs so little and works so well you can’t afford to be without one.
#1 90518 1 256 Win. Magnum
90798 18.00
#2 90519 19 30 Luger
19 30 Mauser Utilize all
#3 90520 4 32 Short Colt your brass Lee Bulge Buster Kit
4 32 Long Colt by
#4 90521 removing Assure your mixed brass is bulge free with the Bulge Buster Kit
4 32 S & W and appro­priate Lee Carbide Factory Crimp Die. This push Cstch
#5 90522 4 32 S & W Long BULGE BUSTER KIT shown annoying
bulge rings Container
7 32 ACP
mounted to Breech Lock
through die adapter will quickly remove the annoying
#6 90523 Reloader Press ( 90045 ).
Sold separately, pg. 18 bulge rings that shell holder constrained dies simply
4 32 Colt N.P.
#7 90524 4 380 Auto can’t reach. The Bulge Buster Kit includes extension
#8 90525 19 9mm LUGER sleeve, push through punch, catch container and
1 38 S & W complete instructions. And it’s fast — you can
#9 90526 1 38 Colt N.P. reprocess your cases as quickly as you can handle
#10 90527 19 38 Super Auto
19 38 ACP
them. CARBIDE FACTORY CRIMP DIES, SEE PAGE 7
#11 90528 1 38 Short Colt Bulge Buster Kit 90487 19.98
#12 90529 1 38 Long Colt
WITH THE LEE FACTORY CRIMP DIE, THE BULGE BUSTER WILL REPAIR
1 38 Special · 357 Mag ALL THESE RIMLESS CASES
#13 90199 19 357 Sig 90867 380 ACP 90864 45 ACP Push Extension
#14 90001 2 357 Auto Magnum 90862 10 mm 90864 45 GAP through Sleeve
19 40 S&W · 10mm Auto Punch
90862 40 S&W 90864 45 Win Mag
#15 90002 1 41 Long Colt 90416 41 AE
#16 19 41 Action Express
90003
9 41 Magnum
#17 91497 11 44 S&W Spl · 44 Mag NOT PURCHASING LEE DIES?
#18 91498 11 44 S & W Russian YOU'LL STILL NEED A SHELL HOLDER
2 44 Auto Mag.
#19 ONLY LEE OFFERS A FREE SHELL HOLDER
90004 2 45 Auto WITH EVERY PISTOL DIE SET PURCHASE
#20 11& 14 45 Colt
91499 11 454 Casull #1·2·3·4·5·7·8 [ OTHERS CHARGE $14.50 FOR THIS NECESSARY PART! ]

#21 90599 14 460 S&W

9 · 10 · 11 · 19
Lee Die Boxes
5 455 Webley Set of Shellholders
#22 91500 Eleven of the most popular sizes fit Perfect storage for dies. Made from tough, durable plastic.
13 45 Auto Rim
#23 91501 over 115 different cartridges. The SINGLE DIE BOX 90616 2.98
3 45 Win. Magnum
chart ( left ) is included with each ROUND DIE BOX 90535 7.50
5 & 16 480 Ruger
#24 91502 5 475 Linebaugh shell holder set. FLAT 3-DIE BOX 90791 4.98
#25 91503 UNIVERSAL SHELL HOLDER SET FLAT 4-DIE BOX 90422 5.98
16 500 S&W
Holds dies with Breech Lock Quick Change insert installed.
90197 47.00
Additional cartridges listed on www.leeprecision.com WORKS WITH ALL BRANDS OF PRESSES Round Die Box lets you store dies installed in 3-hole turret.

www.leeprecision.com 9

2022_Catalog_1227_.indd 9 12/30/21 3:51 PM

 SELECTING THE BEST RIFLE DIE SET LEE PRECISION, INC.

LEE OFFERS THE MOST

COMPLETE DIE SETS NO TOOL
Free shell holder REQUIRED
FINGER
SOME CHARGE OVER $15.00 FOR THIS NECESSARY PART ADJUSTABLE

Free comprehensive load data

BULLET SEATING

PRICELESS ON SOME CARTRIDGES

Free powder dipper

Easiest to adjust dies
WITH FINGER TIGHTEN LOCK RINGS

Built-in stuck case remover

case sizing lubricant
INCLUDED WITH PACESETTER & ULTIMATE DIE SETS

Tightest tolerance IN THE INDUSTRY

Exclusive feature BUILT-IN
PACESETTER AND ULTIMATE DIE SETS STUCK CASE REMOVER
INCLUDE FACTORY CRIMP DIE; EXCLUSIVE
THIS DIE FIRMLY CRIMPS BULLET IN PLACE FACTORY
AND APPLIES A FACTORY-STYLE CRIMP CASE SIZING LUBRICANT CRIMP DIE

Lee Pacesetter &

RGB Series Dies
FOR PRODUCING
FACTORY-DIMENSIONED
AMMO THAT RELIABLY
FITS AND FEEDS
IN ANY GUN
First choice for semi-auto actions.
Full-length sizing is a must if you are
RGB DIES reloading for more than one firearm or
see page 12
reloading cases that were fired in other
firearms. Pacesetter 3-die sets include PACESETTER DIES page 12
the LEE FACTORY CRIMP DIE.

If you intend to reload cases fired in other guns

or you are reloading for more than one gun,
s e l e c t t h e

Lee Ultimate Rifle Die Set

The Ultimate Set includes a full length resizing die that allows
you to restore any case to factory original dimensions so that
you can fire form in your gun and then reload using the superior
Collet neck sizing die. Ultimate Rifle Die Sets include the LEE
FACTORY CRIMP DIE.

COLLET
NECKSIZING
DIES
see page 13

Lee Collet Necksizing Dies

For best accuracy, longest case life and no resizing
lubricant required. Only the neck of the case is
resized. The body is untouched—retains perfect
fit to your gun’s chamber. Cases should have been
fired in your firearm only. Benchrest shooters’ first
choice; there is no other die that can produce a ULTIMATE RIFLE DIE SET see page 13
more accurate cartridge.

10

2022_Catalog_1227_.indd 10 12/30/21 3:51 PM

ON, INC.
ReLOADING22 RIFLE FACTORY CRIMP DIES

FACTORY CRIMP DIE

The Lee Factory Crimp Die is the only effective way to crimp
bottleneck rifle cartridges. Our Factory Crimp Die should be used on all
loads used for hunting. Applying a factory crimp will always improve the
utility of the cart­ridge, and in most cases, will also improve the accuracy.
The Lee Factory Crimp die crimps the bullet in place
more firmly than any other tool. It is impossible to buckle
the case as with regular roll crimp dies. Trim length is
not critical. Tests demonstrate that even bullets which
have no cannelure will shoot more accurately if crimped
VE
in place with the Lee Factory Crimp Die.
E
Factory ammunition is often more accurate and better
able to withstand rough handling because the bullet is
firmly crimped in place. A firm crimp improves accu­racy
because pressure must build to a higher level before
the bullet begins to move. This higher start pressure
insures a more uniform pressure curve and less velocity
variation. Even powder selection is less critical. Until
now, handloaders seated the bullet to touch the rifling
to achieve similar results. This is not always possible nor
desirable. The Lee Factory Crimp Die is included at no NO CRIMP GROOVE
REQUIRED —EVEN
extra charge with Lee PaceSetter 3-Die Sets and Ultimate Rifle Die Sets. WITH JACKETED
BULLETS
It’s just another added value that only Lee Dies offer.
LEE FACTORY CRIMP DIE 15.98

NOT PURCHASING LEE DIES? YOU'LL STILL NEED A SHELL HOLDER

M0ST LEE RIFLE DIE SETS INCLUDE A FREE SHELL HOLDER. Others charge $15.00 for this necessary part!

Set of Shellholders Eleven of the most popular sizes fit over

for 115 different cartridges. Chart below included with each shell holder set. UNIVERSAL SHELL HOLDER SET
SHELL
HOLDER
PRESSES Additional cartridge listings on our website. 90197 47.00
5.98 Works with all brands of presses
# 1 · 2 · 3 · 4 · 5 · 7 · 8 · 9 · 10 · 11 · 19
#1 90518 HOLDER
HOLDER RIFLERIFLE HOLDERRIFLE
HOLDER RIFLE HOLDER
HOLDERRIFLERIFLE HOLDER
HOLDER RIFLERIFLE HOLDER
HOLDER pistol RIFLE
#2 90519 20 17 Hornet 2 250 Savage 12 7.62mm x 39 2 35 Remington 7 32 ACP
#3 3 25/35 16 7.62x54 Russian 5 35 Winchester
90520 4 17 Remington 4 32 Colt N.P.
4 204 Ruger 4 25/45 Sharps 3 30 Herrett 2 35 Whelen 4 380 Auto
#4 90521 4 22 TCM 2 257 Roberts 3 30/30 Win. (30 WCF) 5 350 Rem. Mag. 19 9mm LUGER
#5 90522 20 22 Hornet 5 257 Weatherby 2 300 Savage 3 356 Winchester
1 38 S & W
20 22 K Hornet 2 6mm Creedmoor 16 30/378 2 358 Winchester
#6 90523 3 22 Savage 2 6.5mm Creedmoor 21 30 Remington 5 358 Norma Magnum 1 38 Colt N.P.
2 6.5mm 06 2 308 Win. (7.62 NATO) 3 375 Winchester 19 38 Super Auto
#7 90524 2 22 BR
6 218 Bee 2 6.5mm x 57 4 300 AAC Blackout 5 375 H & H 19 38 ACP
#8 90525 12 22 PPC 3 6.5 x 55 Mauser 5 30/40 Krag (30 U.S.) 5 375 Weatherby 1 38 Short Colt
#9 90526 3 219 Zipper 10 6.5 Jap 2 30/06 Springfield 5 375 Ultra Magnum 1 38 Long Colt
10 220 Swift 5 6.5 Rem. Magnum 5 300 H & H 5 375 Ruger 1 38 Special · 357 Mag
#10 90527 4 221 Fireball 2 6.5 Carcano 5 300 Weatherby 14 38/40 Win. 19 357 Sig
#11 90528 4 222 Remington 12 6.5 Grendel 5 300 Win Magnum 3 38/55 Winchester
2 357 Auto Magnum
4 222 Rem. Magnum 5 264 Win. Magnum 5 300 Ultra Magnum 8 40/82 Winchester
#12 90529 4 223 (5.56mm) 5 26 Nosler 5 300 Win S Magnum 5 416 Remington 19 40 S&W · 10mm Auto
1 41 Long Colt
#13 90199 5 223 WSSM 21 6.8 SPC 5 308 Norma Magnum 25 416 Rigby
2 224 Clark (22/257) 2 270 Winchester 5 303 British 18 43 Mauser 19 41 Action Express
#14 90001 21 224 Valkyrie 5 270 Weatherby 2 7.7 Japanese 17 43 Spanish 9 41 Magnum
#15 90002 10 225 Winchester 5 270 Win S Mag 3 32 Win. Spc’l 14 44/40 11 44 S&W Spl · 44 Mag
2 22/250 2 280 Remington 3 32 Win. S.L. 11 444 Marlin 11 44 S & W Russian
#16 90003 2 240 Weatherby 2 7mm/08 6 32/20 (32 W.C.F.) 8 45/70 Gov’t 2 44 Auto Mag.
#17 91497 2 243 Win. 2 7mm BR 3 32/40 Winchester 2 450 Bushmaster
2 45 Auto
5 243 WSSM 4 7mm TCU 2 8 x 57 Mauser 5 458 Win. Magnum
#18 91498 2 6mm Remington 3 7 x 30 Waters 2 8mm 06 HOLDER PISTOL
11& 14 45 Colt
#19 90004 2 244 Remington 2 & 10 7 x 57mm Mauser 2 8mm Man. Schoe. 15 5.7 x 28 14 45 Schofield
2 6mm Int’l 5 7 x 61 Sharpe & Hart 5 8mm Rem. Magnum 1 22 Rem. Jet 11 454 Casull
#20 91499 5 7mm Rem. Magnum 17 8mm Lebel 15 25 ACP 14 460 S&W
2 6mm/284
#21 90599 2 6mm/06 5 7mm Win S Mag 16 8x56R Hungarian 1 256 Win. Magnum 5 455 Webley
12 6 PPC 5 7mm Weatherby 8 33 Winchester 19 30 Luger
#22 91500 5 7mm Ultra Mag 25 338 Lapua 19 30 Mauser
13 45 Auto Rim
4 6 x 47 (6mm/222M) 3 45 Win. Magnum
#23 91501 2 25/284 2 284 Winchester 5 338 Win. Magnum 4 32 Short Colt
5 & 16 480 Ruger
5 25/303 3 7.5mm Schmidt-Rubin 5 338 Ultra Magnum 4 32 Long Colt
#24 91502 7 30 M 1 Carbine 5 340 Weatherby 4 32 S & W 5 475 Linebaugh
2 25/06
#25 91503 6 25/20 Winchester 3 7.65x53 Arg. Mauser 8 348 Win. 4 32 S & W Long 16 500 S&W

www.leeprecision.com 11

2022_Catalog_1227_.indd 11 12/30/21 3:51 PM

 PACESETTER RIFLE DIES
LEE PACESETTER RIFLE DIES

best
LEE PRECISION, INC.

internal finish
in the industry
ALL LEE DIES ARE
MACHINE HONED TO THE
SMOOTHEST POSSIBLE FINISH
Don’t confuse this with the surface polish that’s
used by most manu­fac­turers. A polish simply
makes a shiny surface. It’s like trying to sand
wood without backing under the sandpaper. The
surface in Lee dies is pro­gres­sively honed to a
fine finish with no waves or ripples.
I N C L U D E S
FULL LENGTH SIZING DIE

BUILT IN STUCK CASE REMOVER

RESIZING LUBRICANT PACKET

EASY X EXPANDER

EASY ADJUST DEAD LENGTH

BULLET SEATING DIE
FACTORY CRIMP DIE includes the exclusive Lee Factory Crimp Die

SHELL HOLDER Lee PaceSetter™ 3-Die Set

POWDER DIPPER These are the most copied dies in the world.
THESE DIES ARE YOUR BEST BUY! Each and every die comes with a written lifetime
LOAD DATA & INSTRUCTIONS
Lee PaceSetter 3-Die sets include the exclusive warranty, 2-year guarantee and guarantee of
COLLET TYPE DECAPPER CLAMP. HOLDS EASY X Lee Factory Crimp™ Die to produce factory-like accuracy or your money back!
EXPANDER PERFECTLY CENTERED IN THE DIE. ALLOWS
ammunition with improved utility and accuracy.
DECAPPER TO SLIDE HARMLESSLY UP PREVENTING
DECAPPER BREAKAGE IF AN The die set also includes an easy adjust dead
LEE PACESETTER 3-DIE SET 45.98
OBSTRUCTION
IS ENCOUNTERED length bullet seater, shell holder, powder dipper, LEE PACESETTER 2-DIE SET 45.98
load data—and all are packed in the nicest The same features as our PaceSetter 3-die
storage box ever designed. The extras represent set, just in very limited production. Does not
a $32.00 value. Most are unavailable at any include Factory crimp die; rather, a bullet seat
STURDY SHANK SO STRONG
price from other suppliers. and crimp die.
YOU CAN DRIVE OUT
A STUCK CASE
WITHOUT DAMAGE
Lee Resizing Lubricant

LEE RIFLE DIES LONG GUIDED NECK

EXPANSION AREA
ANOTHER FIRST BY LEE. We purchased the finest
automotive deep draw lubricant and had it custom pack-
F E AT U R E LOCATED TO
BEGIN EXPANDING
aged exclusively for us. Lee lube is pleasant to handle
THE LEE AS SOON AS THE

EasyX
EXPANDER
NECK LEAVES
THE DIE NEAR
THE PRESSES’
MAXIMUM
and you can thin with water. Non-sticky, non-allergenic.
Very little is needed; it goes a long way. Eliminates stuck
and dented cases, and makes sizing less work.
Spline Drive
MECHANICAL
ADVANTAGE
2 OZ. TUBE 90006 5.98
Bushings
Breech lock quick change bushing with
REALLY
TAPERED AREA
EXPANDS SUB CALIBERS
WHEN CASE FORMING.
integral lock collar provides unmatched
QUICKLY AND
EFFORTLESSLY GREAT precision and convenience when adjust-
ing dies. Split clamp positively locks die
REFORMS DENTED OR
SQUASHED NECKS BUY! into position.
90063 2-Pk 16.00
SUPER STRONG

Buy more
INTEGRAL DECAPPER IS
IS ALMOST UNBREAKABLE
for greater savings
RGB Dies Compare to other brands costing twice
as much and you’ll recognize what a fantastic bargain they
are. We offer these only to show that when you buy Lee
Dies —without all of the extras Lee customers have come
90042 3-Pk 21.00
to expect —the price is significantly lower, yet the quality
is the best. Our tolerance is 50% less than the advertised
amount of a popular and expensive brand. We guarantee
these dies to be better than any other brand. If for any reason you’re not 100% satisfied—just return them
to the factory with your sales slip and pay the difference of what you paid and the manufacturer’s catalog list
price of the dies you want. We will ship them to you with our thanks for trying ours. 90095 4-Pk 26.00
These dies are a Really Great Buy. They cost less, because like other die makers, we left out $32.00
COLOR CODED
worth of extras which are included in our PaceSetter™ dies. Do yourself a favor and check our PaceSetter dies. FOR QUICK,
RGB Series Dies only 29.98 POSITIVE DIE SELECTION

12

2022_Catalog_1227_.indd 12 12/30/21 3:51 PM

ON, INC.
ReLOADING22 COLLET DIES | ULTIMATE COLLET DIE SET

GUARANTEED TO LOAD
THE MOST ACCURATE
AMMUNITION
+or+YOUR MONEY BACK
NO LUBRICATION REQUIRED
GUARANTEED ACCURACY
EXTENDS CASE LIFE 10X
FASTEST TO USE
NO CLEANING OR LUBING REQUIRED

Lee Collet Dies

There is no loading system that will load more accurate last ten times longer, so the savings reloading system ever made. These dies size only
ammunition than Lee Collet Dies. We guarantee it in on only 35 cases will pay for the dies. the neck to preserve the perfect fit of fire forming.
writing with every set. No one but Lee has ever dared Maximum accuracy is usually achieved by seating the Only reload cases that have been fired in your gun.
make a guarantee like this — Smallest group size or bullet out far enough to touch or almost touch the Not recommended for autoloaders, slide or lever action
your money back. A collet squeezes the case neck rifling. This provides the shot start pressure normally guns. See list of sizes on pages 14-15.
against a precision mandrel for a perfect bullet fit supplied by the crimp. That’s why a dead length bullet Lee Collet Die for neck sizing 48.98
with minimum run-out. No case lube is needed. Cases seater is included to complete the most accurate
DIE SETS INCLUDE: COLLET NECK SIZING DIE, DEAD LENGTH BULLET SEATING DIE, SHELL HOLDER, POWDER DIPPER, CHARGE TABLE AND STORAGE BOX.
MOST CALIBERS NOT LISTED CAN BE CUSTOM MADE. SEE WEB FOR DETAILS: leeprecision.com/custom-collet-necksizing-die-set.html

Lee Ultimate Rifle Die Set

Choose this die set for maximum versatility. The set features a
full length-resizing die to return brass to factory new dimensions,
perfect for reloading brass fired in other guns. The Collet Necksizing
die is used on your fire formed brass giving you best possible
accuracy. No case lube required and cases last almost forever. The
Easy Adjust Dead Length Bullet seating die foolproofs the bullet
seating adjustment, and assures perfect seating depth every time.
The Factory Crimp Die provides a secure crimp on bullets with
or without a crimp groove. In most cases, it helps accuracy by
providing a uniform higher start pressure and gives the finished
cartridge factory-like accuracy and dependability.
The set is complete with shell holder, powder measure and
famous Lee load data featuring all common brands of powder
organized in an easy to read logical format.
In addition to best accuracy, you get these benefits
NO CASE LUBRICATION REQUIRED WITH COLLET DIE
REDUCED OR ELIMINATES CASE TRIMMING
TEN TIMES INCREASED CASE LIFE
UNMATCHED SPEED AND CONVENIENCE
MINIMUM BULLET RUNOUT
MOST UNIFORM NECK TENSION

LEE ULTIMATE RIFLE DIE SET 73.00

INCLUDES COMPLETE COLLET DIE SET PLUS
FACTORY CRIMP DIE, FULL LENGTH RESIZING DIE
& RESIZING LUBRICANT SAMPLE.

While competing in a regularly sanctioned 1000 Yard Match on July 25th, 1993,
Lee Collet Die Robert Frey established a new 1000 yard World Record. We’re honored he used the
accuracy LEE COLLET DIE to load his record setting ammunition.
    World record breaker Robert Frey commented: “The Lee Collet Neck Sizing Die
contributes enables me to get top accuracy from my rifles (match and hunting). The design principle
of sizing the case neck to a mandrel is unmatched for accuracy potential by any other dies.
to world record It is one of the best ways to make all of my rifles shoot their tightest groups.”

www.leeprecision.com 13

2022_Catalog_1227_.indd 13 12/30/21 3:51 PM

 LEE RIFLE DIES LEE PRECISION, INC.

.002 UNDERSIZE COLLET MANDREL

UNIVERSAL SHELLHOLDER | P 11

PRIMING TOOL SHELLHOLDER | P31

FREE SHELLHOLDER

COLLET NECK SIZING DIE | P 13

ULTIMATE RIFLE DIE SET | P 13
PACESETTER 3-DIE SET | P 12

PACESETTER 2-DIE SET | P 12

FACTORY CRIMP DIE | P 9, 11

INCLUDED

QUICK TRIM DIE BODY | P 28

PACESETTER VERY LTD. | P 12

CASE LENGTH GAUGE | P 29

WHERE SHOWN

COLLET DIE SET | P 13

The price of Lee Dies include
a FREE shell holder of the proper

RGB DIES | P 12
size. Some manufacturers S

PRODUCTION
charge $15.00 extra for WH
this necessary part.

15.98 — 8.00 — 16.00 —

29.98 45.98 45.98 50.98 48.98 73.00 28.98 5.00 20.00 13 .00 5.98 3.98 20.00
17 Hornet 90096 90605 N/A 91499 90020 90611 300 AA
17 Remington 90770 90804 91000 91571 N/A 90521 90204 90435 300 Ha
204 Ruger 90417 90734 91001 90567 N/A 90521 90204 90439 30/40
22 Hornet 90500 90705 91002 90829 90111 91499 90020 90354 30/30
218 Bee 90753 90830 90225 90523 90206 91350 30/30
221 Fireball 90549 90829 90112 90521 90204 91364 303 Sa
222 Remington 90870 90501 90706 91003 90816 90113 90521 90204 90340 308 Wi
223 Remington 90871 90502 90707 90694 90954 90602 90817 90114 90521 90204 90179 300 Wi
223 Ack. Imp. 90981~ 90707 90954 90602 90817 90114 90521 90204 90179 300 Sa
25-45 Sharps 90475*~ 91107 90521 90204 30/06
22/250 90872 90503 90708 90739 90955 90602 90818 90116 90519 90202 90284 338/06
22/250 Ack. Imp. 90980~ 90708 90955 90602 90818 90116 90519 90202 90284 300 Wi
220 Swift 90542 90702 91004 90831 90118 90527 90210 91370 300 H &
223 WSSM 90446 90673 90522 90205 91358 6.5–30
243 Winchester 90873 90504 90709 90556 90956 90007 90819 90119 90519 90202 90320 300 We
6mm Creedmoor 90482 90759 91005 90007 91488 91340 90519 90202 90658 300 Ult
6mm Rem /244 Rem 90540 90710 91006 90007 90832 90120 90519 90202 90434 7.65 Ar
243 WSSM 90990 90187 90389 90522 90205 91341 7.7 Jap
25/20 WCF 90750 90833 90121 90523 90206 91385 25-303
25/35 90778 91235 91306 90520 90203 303 Bri
250 Savage/250-3000 90550 90834 90122 90519 90202 91374 32-40
257 Roberts 90551 90703 91007 90835 90123 90519 90202 91357 32 Win
257 Ack. Imp. 90988~ 90703 91007 90835 90123 90519 90202 91357 325 WS
260 Remington 90298 90974 91008 90069 90977 90993 90519 90202 90399 8x56 R
25/06 Rem 90536 90711 90957 90836 90124 90519 90202 90334 8x57 M
25 WSSM 90413 90221 90522 90205 8mm Le
264 Win Mag 90774 91247 91308 90522 90205 41 Swis
26 Nosler 90081 91163 91307 90522 90205 90637 338 Wi
6.5 Carcano 90749 91229 90043 90519 90202 91353 338 Ult
6.5 Japanese 90730 91331 90527 90210 348 Wi
6.5 x 55 Swedish Mauser 90874 90627 90712 91009 90069 90837 90126 90520 90203 90337 350 Re
 new 6.5 Creedmoor 91556 91821 90939 91012 90069 90704 90814 90519 90202 90812 358 Wi
6.5 PRC 90662 91492 91533 90522 90205 91348 35 Rem
6.5/300 Win Short Mag 90985 90522 90205 35 Whe
6mm ARC 91562*~ 91563* 91664 90529 90212 91665 9.3 x 62
6.5 Grendel 90557 91606 90596 91278 90529 90212 90763 375 Ru
 new 6.8 Western 91750 91830 90522 90205 91761 300 PR
 new 6.5 Weatherby RPM 91768 91822 90519 90202 91771 375 H &
270 Win Short Mag 90572 90962 90117 90522 90205 90393 416 Re
270 Winchester 90875 90505 90713 90593 90958 90496 90820 90128 90519 90202 90229 43 Mau
224 Valkyrie 90066 91487 91339 90599 90031 90868 43 Spa
6.8 Rem SPC 90427 90735 90189 90599 90031 90397 32-20
7/30 Waters 90748 90838 91335 90520 90203 38-40
7 x 57 Mauser 90541 90714 91010 90631 90839 90130 90519 90202 90489 38-55
7 x 64 Brenneke 90771 90821 90236 90527 90210 91386 375 Wi
7mm/08 90537 90723 91011 90631 90840 90167 90519 90202 90343 44/40
7mm Express/280 Rem 90552 90724 91013 90631 90841 90166 90519 90202 90412 444 Ma
280 Ack. Imp. 90989~ 90724 91013 90131 90841 90166 90519 90202 91375 45/70
7mm Win Short Mag 90573 91271 90314 90522 90205 450 Bu
7mm Rem Mag 90876 90538 90720 90679 91014 90631 90821 90131 90522 90205 90297 50 Beo
7mm STW 90678 90869 91332 90522 90205 350 Leg
7mm Ultra Mag 90979 90869 91333 90522 90205 458 So
284 Winchester 90777 91249 90129 90519 90202 91362 458 Wi
7.35 Carcano 90766 91269 91293 90519 90202
338 Lap
7.5 x 55 Swiss 90767 90186 91015 90480 90184 90132 90520 90203 90419
416 Ba
7.5x54 French MAS 90246 90842 90051 90520 90203 91359
577/45
7.62 x 39 Russian 90877 90565 90701 91016 90827 90133 90529 90212 90345
577 Sn
7.62 x 54 Russian 90731 91607 90842 90147 90003 90200 90342
50 BMG
* THESE DIES DO NOT INCLUDE LOAD DATA ~ 3 DIE SET WITH FACTORY CRIMP DIE
14

2022_Catalog_1227_.indd 14 12/30/21 3:51 PM

ON, INC.
ReLOADING22 LEE RIFLE DIES

1¼ —12 THREAD SERIES | P 20

FACTORY CRIMP DIES | P 20
.002 UNDERSIZE COLLET MANDREL

UNIVERSAL SHELLHOLDER | P 11

PRIMING TOOL SHELLHOLDER | P 31

COLLET NECK SIZING DIE | P 13
ULTIMATE RIFLE DIE SET | P 13
PACESETTER 3-DIE SET | P 12

PACESETTER 2-DIE SET | P 12

FACTORY CRIMP DIE | P 9, 11

QUICK TRIM DIE BODY | P 28

PACESETTER VERY LTD. | P 12

CASE LENGTH GAUGE | P 29

1¼ —12 THREAD SERIES

1¼ —12 THREAD SERIES

COLLET DIES | P 20
COLLET DIE SET | P 13
FREE

RGB DIES | P 12
SHELLHOLDER
INCLUDED

PRODUCTION
WHERE SHOWN

15.98 — 8.00 — 16.00 —

29.98 45.98 45.98 50.98 48.98 73.00 28.98 5.00 20.00 13.00 5.98 3.98 20.00 50.00 130.00 130.00
300 AAC Blackout 90575 90772 91017 90590 90443 90521 90204 90689
300 Ham’R 91564~ 91608 91636 91276 90521 90204 91609
30/40 Krag 90555 90843 90137 90522 90205 91354
30/30 Win 90878 90506 90716 90693 91018 90480 90822 90136 90520 90203 90249
30/30 Ack. Imp. 90982~ 90716 91018 90822 90136 90520 90203 90249
303 Savage 90756 90823 90528 90211 91383
308 Winchester 90879 90507 90718 90695 90959 90480 90823 90139 90519 90202 90231
300 Win Short Mag 90942 90185 91019 90480 90331 90034 90522 90205 90484
300 Savage 90545 90844 90138 90519 90202 91356
30/06 90880 90508 90715 90736 90960 90480 90824 90140 90519 90202 90291
338/06 90987 90849 90519 90202
300 Win Mag 90881 90539 90722 90738 90961 90480 90825 90142 90522 90205 90441
300 H & H 90560 90726 91020 90970 90141 90522 90205 90407
6.5–300 Weatherby Mag 90983 91493 90522 90205
300 Weatherby Mag 90558 90727 91020 90845 90143 90522 90205 90408
300 Ultra Mag 90698 90970 90141 90522 90205 91366
7.65 Arg Mauser 90732 90846 90134 90520 90203 91382
7.7 Jap 90733 90847 90115 90519 90202 91368
25-303 90793 91491 90522 90205
303 British 90882 90547 90717 91021 90826 90144 90522 90205 90325
32-40 90758 91239 90520 90203 91376
32 Winchester Special 90757 91227 90491 90520 90203
325 WSM 90923 91255 90222 90522 90205 91344
8x56 R Hungarian 90925 91273 90589 90003 90200
8x57 Mauser 90883 90544 90719 91022 90848 90148 90519 90202 90347
8mm Lebel 90768 91272 91497 N/A
41 Swiss 90411* 90525 90208
338 Winchester 90546 90721 91023 90849 90149 90522 90205 90391
338 Ultra Mag 90927 91257 91314 90522 90205
348 Winchester 90760 90857 91304 90525 90208 91360
350 Rem Mag 90776 91233 91315 90522 90205 91377
358 Winchester 90797 90904 91318 90519 90202
35 Remington 90543 90728 91024 90828 90150 90519 90202 90403
35 Whelen 90752 91241 90972 90519 90202 91355
9.3 x 62 Mauser 90654 90610 91299 90519 90202 90614
375 Ruger 90090 90609 91285 90522 90205 90613
300 PRC 90224 91494 90522 90205
375 H & H 90559 90729 91025 90850 90164 90522 90205 90395
416 Remington 90805 90906 90522 90205
43 Mauser 90806 91498 N/A
43 Spanish 90765 91497 N/A 91367
32-20 90751‡ ‡ THESE DIES DO NOT INCLUDE FACTORY CRIMP DIE 90421 90146 90523 90206 91365
38-40 90761‡ 90852 91322 90001 90272 91351
38-55 DIE 90762‡ 90853 90994 90520 90203 91379
375 Winchester SETS 90563‡ 90905 90165 90520 90203 91371
WITH
44/40 POWDER 90564‡ 90854 90168 90001 90272 91369
444 Marlin THROUGH 90562‡ 90855 90151 90528 90211 91372
EXPANDING
45/70 Government DIE 90561‡ 45/70 DIES DO NOT WORK ON HORNADY LEVEREVOLUTION CASES 90856 90152 90525 90208 90458

] 60.98
450 Bushmaster 90182 91167 91325 90519 90202 N/A
50 Beowulf 90296* 91738 91292 90529 90212
350 Legend 90078 90445 91567 90521 90204 91561
458 Socom 90409 90815 91290 90519 90202 N/A
458 Win Mag 90800‡ 90969 90971 90522 90205 91345
LARGE SERIES THREADED DIES | Use with Classic Cast Press p. 20

338 Lapua 90353 90462 91503 91496 90745 90635

416 Barrett* SHELLHOLDER NOT INCLUDED 1½–12 to 1¼–12 90903▴ 90252
577/450 Martini-Henry* DIE ADAPTER BUSHING 91500 90902
Use these dies in competitor's press
577 Snider* 91697 12.00 91500 90929
50 BMG SHELLHOLDER NOT INCLUDED 90903▴ 90953 90747 90515
* THESE DIES DO NOT INCLUDE LOAD DATA ▴20.00
www.leeprecision.com 15

2022_Catalog_1227_.indd 15 12/30/21 3:51 PM

 RELOADING PRESS O V E R V I E W LEE PRECISION, INC.

RELOADING PRESSES LAST A LIFETIME, All Lee Presses feature compound toggle linkages. This permits full
so buying on what your budget allows makes the most length sizing the largest magnum cases with ease. Many feature
built-in spent primer catchers, tough powder paint coating and
sense. You’ll never regret buying a value priced press —
detailed instructions. Under normal use, all our presses will last a
you’ll always have a need for a simple press
lifetime. For those that simply want the best, you can’t beat the
for miscellaneous jobs. “Classic Cast.”
THEY ARE THE BEST MONEY CAN BUY!
SINGLE STATION
PRESS
single stage press kit options
if you are just getting started,
you can save even more money by purchasing a kit

OPTIONS
Recommended for new reloaders
or those who prefer to batch load

Breech Lock Hand Press Kit # 90180 page 18 MSRP $94.00

Breech Lock Challenger Kit # 90030 page 19 MSRP $259.00

TUR
Single Station Presses will load nearly any cartridge.
Cartridges are loaded in a batch process—for example,
20 cases are de-primed and sized, charged, then bullets
seated. This die changing process is sped up by the Lee
Breech Lock Quick-Change System. Rifle case reloading
is best accomplished on a single station press. For a
beginner, a single station press in a kit is the best value.
50th Anniversary Kit # 90050 page 19 MSRP $229.00
Compatible cartridges Rounds per hour
All cartridges up to 460 Weatherby Mag 50
Breech Lock Challenger Press # 90588 page 19
MSRP $ 116.00

Breech Lock Reloader Press # 90045 page 18

MSRP $63.98

Compatible cartridges Rounds per hour

All cartridges up to 50 BMG 50
Accepts both 7/8 – 14 Threaded Dies and
Large Series Threaded Dies 11/4 -12
Classic Cast Press # 90998
MSRP $ 240.00
190.00 see more information on page 20 Bench Prime Press Kit # 91628 page 19 MSRP $268.00

16

2022_Catalog_1227_.indd 16 12/30/21 3:51 PM

ON, INC.
ReLOADING22 PRESS SELCTION OV E R V I E W

RECOMMENDED
FOR ADVANCED
HIGH VOLUME
PROGRESSIVE USERS

PRESS
OPTIONS

TURRET PRESS PRO 4000 PRO 1000 LOAD-MASTER

TURRET PRESSES offer single station PRO 4000 Designed with the perfect balance DESIGNED FOR VERY HIGH PRODUCTION of handgun
simplicity with near progressive of speed and simplicity. This press is so easy
cartridges. Add a bullet and pull the lever; other operations are
speed. No need to unscrew dies; the to set up and operate: if you have reloaded
turret advances to the next station before, you likely won’t even need to look at automatic. Select these presses only if you are shooting more than
automatically. Four pulls of the lever the instructions. Cartridge changeover can 500 rounds per week.
and you have a completed round. be completed in seconds. Breech Lock quick
If loading limited quantities of many different cartridges, a Turret
Perfect for moderate production of change feature in all four positions.
handgun ammunition. Deactivate the You’re also going to enjoy using this press Press or Pro 4000 is your best choice. Changeover from cartridge to
Auto-Index feature and you can batch for simple case processing like depriming and cartridge can become involved on the progressive presses.
reload the longest rifle cartridges. sizing a batch of cases for tumble cleaning
Twist and exchange the turret, snap in or case trimming. With the auto index
a new shell holder, and you’re ready to deactivated, you can use it as the handiest Compatible cartridges Rounds per hour
load your next cartridge. single station press ever made.

Rounds Rounds
32 S&W LONG to 223 Remington 500 +
Compatible cartridges Compatible cartridges
per hour per hour
Pro 1000 FULL DESCRIPTION PAGE 24
All cartridges up to MSRP $ 340.00
460 Weatherby 250
32 S&W Long to 30/06 500+
Mag
Pro 4000 Kit Compatible cartridges Rounds per hour
Classic Turret Press Full description pg 25
# 90064 pg 21 MSRP $ 345.00 32 S&W LONG to 30/06 500 +
MSRP $ 210.00
Auto Breech Lock Pro Load-Master FULL DESCRIPTION PAGE 25
Value Turret Press Press only # 90900 pg 25 MSRP $ 480.00
# 90932 pg. 22 MSRP $ 200.00
MSRP $ 150.00

www.leeprecision.com 17

2022_Catalog_1227_.indd 17 12/30/21 3:51 PM

 RELOADING PRESS O V E R V I E W LEE PRECISION, INC.

COMPACT Lee Breech Lock Hand Press

B
PRESSES
Features the Lee Breech Lock System. A full size hand held reloading
press, yet the tool weighs only 1¾ pounds and costs so little you
will want more than one. No matter how much equipment you
have, it’s great to have a portable hand press. No time is wasted
mounting a tool to a work bench.
When you’re finished—just pack
it away.
90685 70.00

“O”
MOS
STY
   
BREECH LOCK RAM PRIME

Breech Lock Hand Press Kit

Shown on optional Bench Plate. THE PERFECT PORTABLE RELOADING PRESS KIT
Order #90251
Begin reloading at once. No wasted time mounting to a work bench. Pack
it all in the box when finished. Great for apartment dwellers or loading at
Lee Breech Lock the range. Dies sold separately.
Reloader Press
KIT INCLUDES
INCLUDES THE BREECH LOCK SYSTEM
BREECH LOCK HAND PRESS
An outstanding value. Exclusive balanced lever that can’t drop down RAM PRIME
to pinch your fingers. Unlimited hand clearance that only a ‘‘C’’ frame POWDER FUNNEL
can offer. Works equally well with the right or left hand. Even if you CASE SIZING LUBE
already own a press, an extra press is always useful for decapping,
90180 94.00
bullet seating or bullet sizing.
90045 63.98

BIG GUN INSPIRED

BREECH LOCK QUICK CHANGE
STANDARD ON ALL
LEE SINGLE STATION PRESSES
Switch dies with a ⅙ of a turn rather than fourteen or more turns.
Loading with a breech lock equipped press is as convenient as New, improved
a Turret Press when loading small quantities of ammunition.
Interrupted three-start thread assures dies will return and lock
Breech Lock Ram Prime
into the exact same position. If cost is more important than Start priming in seconds, nothing to adjust.
convenience, you can leave the Breech Lock bushing locked in
the press and screw dies in and out like a conventional press. Includes small and large priming assemblies,
no tiny parts to fumble with or lose.
Change dies Spline Drive Bushings
instantly Breech lock quick change bushing with integral Effortless priming in the
with a twist lock collar provides unmatched precision and
of the wrist tightest pockets.
convenience when adjusting dies. Split clamp
positively locks die into position. Uses any brand press shell holder.
90063 2-Pk Safe with all brands of primers.
16.00
Works in any Lee Breech Lock press or adapter.
Buy more 91612 19.98
for greater savings

90042 Lee Ram Prime

3-Pk Primes on the press up-stroke for a more sensitive
Breech Lock Bushings 21.00 feel. Includes small and large priming assemblies;
Breech lock bushings fit all Lee Breech
Lock presses. Allows instant, accurate no tiny parts to fumble or lose. Fits all brands of
die changes. 90095 presses. Use on old school presses, where you
4-Pk
90600 need to thread in dies.
2-Pk. 12.98
26.00
90106 19.98
Color coded for quick,
positive die selection
18

2022_Catalog_1227_.indd 18 12/30/21 3:51 PM

ON, INC.
ReLOADING22 CHALLENGER PRESS | PRESS KITS

BREECH LOCK CHALLENGER

“O” FRAME . . .
MOST POPULAR
STYLE PRESS Shown on
   BY FAR optional Bench Plate.
Order #90251

50t h A N N I V E R S A R Y K I T
Breech Lock Challenger Press A COMPLETE POWDER HANDLING SYSTEM with the most
The “O” frame press by design is the strongest and most popular convenient and repeatable Perfect Powder Measure, plus the Lee Safe-
style press by far. Large opening and long stroke handles the largest ty Scale, the most sensitive, safest of all powder scales. Fill your cases
belted magnums with ease. The primer catcher is positive and routes with the Powder Funnel.
the spent primers directly to the trash can. Priming is a dream with the Case Preparation tools include the Lee Value Trim case trimmer to
Lee Lever Prime System. Best of all, it includes the Breech Lock trim on your reloading press (order cartridge specific trim die separately
Quick Change Die System. Change dies instantly with a
on pg. 28), and a Cutter & Lock Stud to trim your cases. (Order cartridge
twist of the wrist; you’ll never have to re-adjust your die.
specific case length gauge separately on pg. 28–29). The Lee Chamfer
Other features include all steel linkage with adjustable
Tool chamfers the inside and outside of the case mouth, and a tube of
length lever. This same press would cost you more than
twice as much from other manufacturers, and that’s premium Sizing Lube is also included. A small and large Primer Pocket
without all of the Challenger’s features. Cleaning Tool completes the case preparation package.
But that’s not all! You get the large and small Safety Prime. Prime with
90588 116.00
push button convenience and is safe with all brands of primers. Never
touch the primer from box to the case.
Purchased separately $268.86 value 90050 229.00

Primer Arms
LARGE & SMALL SAFETY PRIME
90997 30.00
SEE DESCRIPTION PAGE 22

NEW

Shown on
optional Bench Plate.
Order #90251
BENCH PRIME PRESS KIT
BREECH LOCK CHALLENGER KIT
Featuring all the components of the 50th Anniversary Kit,
but we’ve replaced the Safety Prime with the Auto Bench Features the same components as the 50th Anniversary
Prime, along with 3 of the most popular Auto-Prime shell Kit, but we have replaced the Safety Prime with the New Auto-Prime
holders which work with over 60 different cartridges. and a set of three of the most popular Auto-Prime shell holders.
This kit is ideal for those who want to prime on the
This kit is for those who prefer to prime off the press.
workbench. If you purchase all components separately—
it's a $294.78 value. If purchased separately—a $282.78 value.
90030 259.00
91628 268.00
www.leeprecision.com 19

2022_Catalog_1227_.indd 19 12/30/21 3:51 PM

 CLASSIC CAST PRESS LEE PRECISION, INC.

HAVE AN OLD SCHOOL PRESS AND THREAD PRESS NOW INCLUDES

DIES INTO REMOVABLE, THREADED ADAPTER? BREECH LOCK ADAPTER
MODERNIZE YOUR PRESS WITH THE
BREECH LOCK SYSTEM Gives you the ability to quick change dies
90512 1 1/4-12 15.00 or remove the adapter to load
the mammoth 50 BMG
90094 1 1/2-12 16.00

BAKED POWDER FINISH AND ALL STEEL LINKAGE

MAKE THE LEE CLASSIC CAST PRESS THE
MOST ATTRACTIVE AND DURABLE PRESS MADE d
LARGE

RIGID
& SMALL
SAFETY PRIME

CAST IRON
90997 30.00

FRAME,
cast+and+
machined
+with+ PRIDE
LEE PRECISION, INC.
NEED

IN+the+USA
BUSHINGS?
page 9

LEE CLASSIC CAST PRESS

90998 240.00
d
CHANGES
EASILY FOR
. The industry’s largest opening, and LEFT-HANDED USE.
longest stroke—handle adjusts to provide
least travel of any press.
. Largest ram, 1 ⅛” diameter, supported by
over 12 square inches of ram bearing surface.
.  Spent primer disposal direct to trash can d
with attached tube. SPENT PRIMERS
COLLECTED AND
.  Powerful compound linkage with positive DROPPED INTO
travel stop prevents press toggle or “cam over.” FLEXIBLE PLASTIC
TUBE FOR EASY
. Rigid cast iron construction in a classic EMPTYING.
“O” design for maximum strength.
Baked powder coating is durable and
makes a handsome addition to any reloading bench. Shown on optional Reloading Stand. Order #90688

.  Large, flat cored base with 3 mounting holes, .  Designed to work with both standard ⅞–14 and large series 1¼–12 dies.
mounts solid to any bench. Included Breech Lock adapter to accept standard ⅞–14 dies. Change
. Automatic primer arms with bottom of dies instantly with a quick twist of the wrist.
stroke priming for best feel. Includes both large . Two-piece ram allows installation of the mammoth 50 BMG shell holder
and small priming arms. No more fumbling with or the shell holder insert for standard press shell holders. Shell holder
tiny guides and springs when changing primer size. insert can be rotated to allow primer installation on the right or left side.

50 BMG Loading Block

Block dimensions 9’’ x 8’’ CLASSIC CAST
50 BMG PRESS KIT
High impact, chemical resistant plastic
Holds 72 cases, can also be used to 1½ -12 to 1¼ - 12 Die
store 7/8 – 14 die sets Adapter Bushing
Use the Lee 50 BMG and At last, an affordable way to reload
Continuous flange surrounds tray for
easy lifting.
other 1¼ series dies in
competitor's 50 BMG large the monster 50BMG
presses. 91697 12.00 KIT INCLUDES EVERYTHING YOU NEED TO START RELOADING THE 50
90632 15.00

LARGE SERIES RELOADING DIES LEE CLASSIC CAST PRESS • SET OF 50 BMG DIES
SHELL HOLDER • RAM PRIME TOOL • AND TUBE
1¼–12 Thread Series OF CASE SIZING LUBE
Factory Crimp Dies 50.00
90953 50 BMG BREECH LOCK ADAPTER KIT also includes shell
90745 338 Lapua holder insert, large & small primer arms and breech lock
adapter bushing to accept standard 7/8-14 dies so you
1¼–12 Thread Series can load all your smaller cartridges. All this for less than
Collet Dies 130.00 what others charge for dies alone.
90747 50 BMG 50 BMG Die Set 1¼–12 Thread
90635 338 Lapua 90515 125.00 50 CALIBER
BMG PRESS KIT
1¼–12 Thread Series130.00
90859 375.00
90902 577/450 Martini-Henry *
90929 577 Snider * 50 BMG
Factory Crimp Die
90252 416 Barrett *
Shellholder not included
90953 50.00
90515 50 BMG
Shellholder not included 50 BMG Shell holder 50 BMG
*These dies do not include load data 90903 20.00 Ram Prime Tool
90901 25.00

20

2022_Catalog_1227_.indd 20 12/30/21 3:51 PM

 ReLOADING22 CLASSIC TURRET PRESS | KIT

Lee Classic Turret Press

A MACHINE
The sturdy iron base shows its Classic Cast roots. The long stroke
allows rifle cases over three inches long to be loaded using the auto-

THAT
matic index. Deactivate the Auto-Index and cases over 4 inches can
be loaded. The rigid cast iron frame supports the ram with over 12

DOES IT ALL
square inches of area. The industry’s largest ram is drilled completely
through to dispose primers in an attached clear PVC tube. Every
primer is caught — guaranteed.
Instant change turrets are the same as the famous Lee Turret This press has all the
Press. The Classic Turret uses the Lee Lever Prime System · LPS
features of the award-
and the optional Lee Safety Prime tool makes priming on the
winning Turret Press with
press a delight. If you like to own the best, then treat yourself
to the Lee Classic Turret. The finest reloading system made.
the quality touches that
make this the finest, most
LEE CLASSIC TURRET PRESS 90064 210.00
convenient press to own.
Shown on optional Reloading Stand. Order #90688 The Classic Turret features
the solid steel linkage
Lee Safety Prime of the Lee Classic Cast.
Your first stroke of the
Makes priming on the
press a delight. Never hardwood gripped lever
touch the primers from will convince you
box to shell. Primer flip this is one solid, silky
tray features a CAD
designed flipping surface smooth press!
that instantly rights the
primers. Change primer
size in seconds. Primers
are dispensed with a
satisfying click of the
primer feed trigger.
90997 30.00

GET AN ADDITIONAL
TURRET FOR YOUR
POWDER LEE PRESSES
MEASURE RISER EXTRA TURRET, 4 HOLE SPENT PRIMERS COLLECTED
FOR SAFETY PRIME 90269 15.00 AND DROPPED INTO
90041 FLEXIBLE PLASTIC TUBE
See page 33 FOR EASY EMPTYING.

CLASSIC TURRET PRESS KIT

THIS KIT AND A SET OF LEE DIES IS EVERYTHING YOU NEED TO BEGIN
RELOADING PISTOL AMMO. The Classic Turret Press is fast and convenient when
loading handgun cartridges, with rates in excess of 250 rounds per hour possible.
The kit includes the Auto-Drum powder measure and powder measure riser,
perfect for all handgun and rifle cartridges. Large and Small Safety Prime are
included making on press priming a delight! Instant Change Turret makes changing
calibers a snap. Deactivate the auto-index, and batch load the longest and largest
rifle cartridges.
Complementing your press kit are the case condi-
tioning tools to prepare your brass for loading. Includes
Cutter, Lock Stud, Chamfer Tool, small and large
Primer Pocket Cleaner, and a tube of Lee case sizing
lube. Complete it with the cartridge specific Case
Length Gauge. Verify your loads with the included
Lee Safety powder scale.
Completing the kit is Modern Reloading Second
Edition, 2021 revision with all new
load data covering over 170 cartridg-
es with more than 38,000 loads.
90304 370.00

Shown on
NOTE Rifle reloaders require SHORT or optional
LONG CHARGING DIE | see page 33 Bench Plate.
Order #90251

www.leeprecision.com 21

2022_Catalog_1227_.indd 21 12/30/21 3:52 PM

 VALUE TURRET PRESS | KIT | SAFETY PRIME LEE PRECISION, INC.

VALUE TURRET PRESS

equipped with the LEE LEVER PRIME SYSTEM ™
Proven design with compound leverage. No spring in this turret design. The
turret is locked into a solid steel ring with big rifle bolt type lugs. Exclusive
design puts the lugs on the circumference so there can be no tipping. The
linkage is so powerful that the largest magnum cases are sized with ease.
Shown on
optional Reloading Stand.
Effort required is so small that the usual heavy bench is not essential. The Lee
Order #90688 Turret Press has built-in primer disposal tube and a comfortable roller handle.
Even if you do not need all of these features, why pay more for anything less?
Power and strength to spare, plus unequalled convenience. The Lee Turret
Press is suitable for loading all rifle and pistol cases, but really shines when loading
large quantities of hand­gun ammunition. This is the most convenient press made.
Only a true progressive press is faster. Includes the lee lever
prime system with large and small primer arms. Works with the
Lee Safety Prime.
Low profile
steel base 4 HOLE TURRET PRESS w/Auto Index 90932 150 .00
with positive
through
ram primer
disposal Lee Safety Prime
Makes priming on the press a delight. Never touch
the primers from box to shell. Primer flip tray
features a CAD designed flipping surface that
instantly rights the primers. Change primer size in
seconds. Primers are dispensed with a satisfying
click of the primer feed trigger.
90997 30.00

POWDER
Built-in primer MEASURE RISER
disposal tube FOR SAFETY PRIME
90041
See page 33

GET AN ADDITIONAL
TURRET FOR YOUR
LEE PRESSES
EXTRA TURRET, 4 HOLE
90269 15.00
VA L U E
TURRET PRESS
Lee Value Turret Press Kit
The Value Turret Press, along with the Auto -Drum Powder
KIT
Measure, produces top quality pistol ammo in a hurry.
A finished round with a few pulls of the lever. Disconnect
the Auto-Index and it’s large enough to handle monster belted
magnum rifle cases. When it’s time to change calibers, simply
lock in a new turret and begin reloading in seconds. In addition
to the Turret Press and Auto Drum Powder Measure, the kit
includes the Lee Safety Scale, unmatched for sensitivity, a
primer pocket cleaner, cutter and lock stud to trim the cases
and a chamfer tool to deburr cases after trimming. Complete
the case conditioning tools with the cartridge specific Case
Length Gauge (see page 28).
A set of Lee Dies is all that is required to complete this
reloading outfit. And all of this at a price that will allow you Shown on
to pay for your investment in a matter of hours. optional
Bench Plate.
VALUE TURRET PRESS KIT 90928 260.00 Order #90251

NOTE Rifle reloaders require SHORT or LONG CHARGING DIE | see pg 33

22

2022_Catalog_1227_.indd 22 12/30/21 3:52 PM

ON, INC.
ReLOADING22 PROGRESSIVE PRESS ACCESSORIES

PROGRESSIVE PRESS SHELL PLATES

PRO1000 PRO 4000 LOAD-MASTER
POSITIVE INDEX
SHELL PLATES SHELL PLATES SHELL PLATES
20.00 25.00 29.98
PRODUCT PRODUCT PRODUCT
NO. PLATE CARTRIDGES NO. PLATE CARTRIDGES NO. PLATE CARTRIDGES

90651 1 38 SPECIAL, 357 MAG, ETC. 90582 1 38 SPECIAL, 357 MAG, ETC. 90907 1S 38 SPECIAL, 357 MAG, ETC.
90652 2 45 ACP, 45 GAP, ETC. 90584 2 45 ACP, 45 GAP, ETC. 90908 2L 45 ACP, 30/06, 308, 6.5 CREEDMOOR
90664 3 45 WINCHESTER MAGNUM
90909 3L 30/30, 7x30 WATERS, 7.5 SWISS
90629 3 45 WINCHESTER MAGNUM
90910 4S 222, 223, 380 ACP
222, 223, 380 AUTO, 32 S&W LONG, 222, 223, 380 AUTO, 32 S&W LONG,
90653 4 32 H&R MAGNUM 90630 4 90059 4A 32 S&W LONG, 32 H&R MAG., ETC
32 H&R MAG
90976 6 32/20, 25/20 90911 5L BELTED MAGNUMS 300 MAG
90647 7 30 M1 CARBINE, 32 AUTO 303 BRITISH , 30/40 KRAG, 7MM WSM
90655 7 30 M1 CARBINE, 32 AUTO 90278 9 41 MAGNUM 90912 6S 32/20, 25/20, ETC.
90656 9 41 MAGNUM 90913 7S 30 M1 CARBINE, 32 ACP
90648 11 44 SPECIAL, 44 MAGNUM, 45 COLT
90914 8L 45/70, 348 WIN, 416 RIGBY
90657 11 44 SPECIAL, 44 MAGNUM, 45 COLT
90414 12 7.62 x 39 RUSSIAN, 6.5 GRENDEL 90915 9L 41 MAGNUM
90666 12 7.62X39, PPC, 22O RUSSIAN 90916 10L 220 SWIFT, 6.5 JAP, 458 SOCOM
90649 13 45 AUTO RIM
90665 13 45 AUTO RIM 90917 11L 44 MAG., 44 SPL., 45 COLT
90802 14 38/40, 44/40, 45 COLT, 460 S&W
12L
90065 14 38/40, 44/40, 45 COLT, 460 S&W 90918 7.62X39, 6MM PPC, 22 PPC, ETC.
40 S&W, 10mm AUTO, 9MM LUGER, 90659 16 500 S&W, 7.62X54R 90919 14L 44/40, 38/40, 45 COLT, 460 S&W
90669 19 38 SUPER, 38 AUTO, 41 AE
90944 19 40 S&W, 10MM AUTO, 9MM LUGER, 90612 16L 500 S&W, 7.62X54R
38 SUPER, 38 AUTO, 41 AE 90920 19S 9MM LUGER, 40 S&W, 38 SUPER, ETC.
90941 21 6.8 SPC, 224 VALKYRIE 90068 19L 10MM AUTO
90884 20 22 HORNET
90984 21L 6.8 REM SPC, 224 VALKYRIE
Check shell holder chart on page 31 for further listings.

   ACCESSORIES for the PRO 1000 · PRO 4000 · LOAD-MASTER

BULLET FEED KIT IS COMPLETE FOR ONE BULLET DIAMETER AND
RANGE OF LENGTH. TO CONVERT TO ANOTHER CALIBER OR BULLET LENGTH,
SELECT APPROPRIATE FEED DIE AND FINGER & BULLET SEAT AND FEED DIE
48.00     16.98
FEED KITS
DESCRIPTION FEED DIE
COMPLETE AND FINGERS

90892 30 & 32 cal Bullets up to .60 long 90885

90893 9mm through .365 diameter up to .46 long 90886
90894 9mm through .365 diameter .46 to .60 long 90887
90895 9mm through .365 diameter .60 to .75 long 90888
90896 40 cal through .44 cal up to .65 long 90889
90897 40 cal through .44 cal .65 to .80 long 90890
90898 45 cal bullets .50 to .67 long 90891

Multi-Tube Adapter for Bullet Feed Kit

UNIVERSAL Four tube magazine keeps Lee Bullet Feeder fed with a continuous
CASE FEED MAGAZINE supply of bullets. Each tube holds approximately 25 bullets. Quickly
90242 35.00 and easily installed. Includes large and small adapters, four large and
Automates case feeding
process. Cartridge compatibility small feed tubes and cylinder, plate assembly.
listing on leeprecision.com
EXTRA CASE FEEDER
90280 28.00
TUBES
7 Pk. 90661 9.98
for the LOAD-MASTER
CASE COLLATOR
Fill all four tubes in just 10
seconds. Works with handgun,
.380 to 45 Colt.
90667 14.98

LARGE PRIMER FEEDER FOLDING

90077 24.98 PRIMER TRAY 2-PK
90606 8.00
SMALL PRIMER FEEDER
90075 24.98

www.leeprecision.com 23

2022_Catalog_1230_.indd 23 12/30/21 4:21 PM

 PRO 1000 | PRO 4000 KIT LEE PRECISION, INC.

ADD A BULLET RATES

OUR P
AND PULL THE LEVER OUR P
ALL OUR PROGRESSIVE PRESSES CASE

I
LEE PRO 1000 KIT
WILL PRODUCE A RELOADED ROUND CASE
be ntroduced in 1984 as the world’s
, first affordable progressive press.
WITH EVERY STROKE. BECAUSE EVERY LOAD
ts.
Place a bullet and pull the lever; all PULL OF THE LEVER PRODUCES SELEC
other operations are automatic. Load A LOADED ROUND — PRODUCTION FEATU

PRO 4000 KI
H&R MAG singly or progressively, feeds powder and
primers only if case is present.
TO, 41 AE Recently improved design with
better ergonomics, steel frame, less than
positive index pin, roller handle es, the lo
and positive through ram primer
disposal. available
sive pre
begin re
Ergonomic
wood grip and All th
all-steel linkage added
crimping
design f
change
with all b
32 S&W LONG AND 32 H&R MAG 90639* priming
380 AUTO 90641*
38 SPECIAL AND 357 MAGNUM 90636 for loadi
38 AUTO AND 38 SUPER 90035 easy to c
9MM LUGER 90640
‡ 40 S&W 90682 press fo
41 MAGNUM 90642 riming b
44 SPECIAL AND 44 MAGNUM 90634
45 ACP 90638 auto ind
45 COLT 90643 press ev
223 90633*
INCLUDES SHORT CHARGING DIE. AUTOM
NOT AVAILABLE IN CARBIDE 2 5/16.”
* INCLUDES AUTO-DRUM POWDER MEASURE manua
‡ 1 0MM AUTO CAN BE RELOADED. PURCHASE AUTOM
LARGE TROUGH #TR2164B, PIN #TR2436 AND
10MM LOAD DATA #C41311 MODU
much o
LEE PRO 1000 desire
COMPLETE, READY TO RELOAD
340.00 CARTR
Safe with CCI or Remington brand primers only includ
Color
breech
Built-in primer INCLU
disposal tube
and pr
of any
TURRET INCLUDE
90497 FOR SHE
19.00 NEARLY $
INCLUDE
OTHERS
Automatically advances cases up to 2 5/16 ” INCLUDE

Quick Change three die turret

Set up for specific cartridge and one primer size
Safe with CCI or Remington brand primers only Cartridge changeover in seconds,
including primer size Auto B
Bullet seating and crimping performed in one operation SHELL PLATES 45 ACP
with no adjustments.
91550
Large &
Auto D
FOR PRO 4000 9mm LUGER 91555 Shell P
BIN & BRACKET Catch your loaded rounds. See page 4 90687 14.00 shown on page 23 38 SPECIAL AND 357 MAGNUM 91557
Univer
Reload
44 SPECIAL AND 44 MAGNUM 91558 Bin & B
Color C
223 REMINGTON 91551

24

2022_Catalog_1227_.indd 24 12/30/21 3:52 PM

ON, INC.
ReLOADING22 LEE LOAD-MASTER
ET
LOAD·MASteR
RATES ARE VIRTUALLY IDENTICAL ON
OUR PROGRESSIVE PRESSES. ALL OF
VER OUR PRESSES FEATURE AUTOMATIC
SSES
ROUND
CASE ADVANCE AND UNIVERSAL
CASE FEEDER. ALL ARE SETUP TO a MASSIVE PRESS
EVERY
DUCES
CTION
LOAD ONE CARTRIDGE. YOU CAN
SELECT THE RIGHT PRESS BY THE
FEATURES YOU NEED.
+with+ ADVANCED FEATURES
00 KIT SECOND-GENERATION
progressive press priced
less than many premium single station press-
es, the lowest priced four- station progressive
available. It is also the easiest to use progres-
sive press ever made. Everything included to
begin reloading nothing else to buy.
All the features of the Pro 1000 with an
added fourth station to allow factory
crimping and post sizing. Second generation
design features a fixed tool head with quick-
change bushings. The Safety Prime is safe
with all brands of primers and makes on press Precision 5-Hole Turret
with 20 locking lugs takes
priming fast and dependable. The ideal press just seconds to change.
for loading well used or mixed range brass. So 90079 16.00
easy to change you’re going to enjoy using this
press for simple case preparation, like dep-
riming before tumble cleaning. Deactivate the
auto index and it is the handiest single station
press ever made.
AUTOMATICALLY ADVANCES cases up to
2 5/16.” Longer cartridges can be loaded by SHELL PLATES
manually advancing. FOR LOAD-MASTER
shown on page 23 BIN INCLUDED ORDER ADDITIONAL #90687
AUTOMATIC Universal Case Feed Magazine SHOWN ON OPTIONAL Explosion Shield
MODULAR CONSTRUCTION allows as RELOADING STAND #90688 INCLUDED 90363 10.00
Necessary if using primers
much or as little automation as the operator other than CCI or Remington brand
desires with no adjustments.
CARTRIDGE CHANGEOVER in seconds, CALIBERS EQUIPPED WITH RELOADING
including primer size with no adjustments. DIES, PRO AUTO-DISK POWDER MEASURE
Color coded spline drive quick change & CASE FEEDER 480.00
breech lock bushings. 223 REMINGTON 90922*
INCLUDES Large and Small Safety Prime 32 S&W LONG • 32 H&R MAG 90935*
and priming arms. Allows safe dispensing 9MM LUGER 90936
380 AUTO 90937*
of any brand and size primer.
38 SPECIAL AND 357 MAGNUM 90938
INCLUDES STORAGE RACK FOR TOOLS, AND HEX WRENCH
FOR SHELL PLATE CHANGEOVER. OTHERS CHARGE 40 S&W ‡ 90940
NEARLY $30 FOR THIS FEATURE. 44 SPECIAL AND 44 MAGNUM 90943
INCLUDES ERGONOMIC WOOD GRIP ROLLER HANDLE. 45 ACP 90945
OTHERS CHARGE NEARLY $50.00 FOR THIS FEATURE. 45 COLT ( WILL LOAD 454 CASULL ) 90946
Grease fittings, along with a 1¾ inch diameter hard plated ram,
INCLUDES BIN & BRACKET TO CATCH LOADED ROUNDS. ensure a lifetime of service for even the commercial reloader * INCLUDES AUTO-DRUM POWDER MEASURE
‡ 10MM AUTO CAN BE RELOADED. PURCHASE
Stroke and clearance sufficient for largest magnum rifle cases LARGE PRIMER FEEDER #90077 AND 10MM
LEE PRO 4000 KIT Loads long rifle cartridges progressively LOAD DATA #C41311
INSTALL AUTO BREECH LOCK PIN;
ADJUST YOUR DIES AND BEGIN RELOADING Load progressively or singly without spilled powder or components.
345.00
Five stations so you can factory crimp and post size.
AUTO BREECH LOCK PRO PRESS ONLY #90900 200.00
Automatic indexing
Auto Breech Lock Pro Press
Large & Small Safety Prime
200
30
PURCHASED
SEPARATELY, Tray feed top of stroke priming system
VALUED OVER
50 Auto Drum Powder Measure 54
55 Shell Plate 25 $427 Removable turret Large Primer Feeder 90077
Universal Case Feeder 35 24.98
57 Reloading Dies 43 Loaded round ejector and case catcher
58 Bin & Bracket 14 Small Primer Feeder 90075
Color Coded Spline Drive Bushings 26 24.98
51 Quick change shell plate. No tools required

www.leeprecision.com 25

2022_Catalog_1227_.indd 25 12/30/21 3:52 PM

 APP AUTOMATIC PROCESSING PRESS LEE PRECISION, INC.

FAST
AND EASY

LEEAPP
ROLLER HANDLE
UPDATE KIT
30.00
THE
91629

aUTOMATIC pROCESSING pRESS

The fastest and easiest way to deprime, size, swage,
bulge bust, flare or size cast bullets, period!
Built in case and bullet feeder makes this
the fastest single station press ever made.
Frameless design with an all steel linkage
allows primer pocket swaging with ease.
Counter balanced handle prevents the handle
from falling and pinching a finger.
Almost unlimited visibility and
hand clearance.
Dirty, gritty, lead contaminated
Compact footprint mounts easily on any spent primers are 100% captured

bench or table, with no under-swing. in a screw top bottle

APP shown on optional Reloading Stand #90688 with Bin & Bracket accessory #90687
Dirty, gritty, lead contaminated spent primers
are 100% captured in a screw top bottle. X-PRESS SHELLHOLDER
Accepts standard 7/8—14 dies and The APP gets its speedy operation in part, by the use of a new shell
holder. We call it the X-Press Shell Holder. it allows the case to pass
shell holders of any manufacture. through the shell holder after the operations are performed.

A little over three inches of stroke allows X-PRESS APP PRODUCT

SHELL HOLDER SHELL CARTRIDGES
sizing of the larger, belted magnum cartridges. F O R APP HOLDER NO.
AUTOMATIC PROCESSING PRESS
#1 91534 38 Long & Short Colt, 38 SPL, 357 MAG
Priced less than nearly all single station presses 4.98 ea
#2 91535 45 ACP, 308 Win., 30-06
makes it a perfect starter press or a perfect #3 91536 30/30, 6.5x55 Mauser, 32/40
companion press to an expensive progressive. #4 91537 223 Rem, 5.56 NATO, 300 Blackout
#5 91538 WSM’s, 7mm Rem Mag, 303 British
Includes the three most #6 91539 218 Bee, 25/20, 32/20
popular X-Press Shell #7 91540 30 M-1, 32 ACP
holders 2, 4 and 19 #8 91541 33 Win, 348 Win, 40/65, 45/70
#9 91542 41 Magnum
#10 91543 220 Swift, 6.5 Jap, 7x64 Brenneke
#11 91544 44 SPL/MAG, 45 Colt, 303 Savage
#12 91545 22 PPC, 6 PPC, 7.62x39R
#13 91546 45 Auto Rim
X-PRESS
SHELLHOLDER SET #14 91547 44/40, 45 Long Colt
APP Press INCLUDES PRESS, AUTOMATION KIT, BOTTLE ADAPTER CONTAINS 1 · 2 · 3 · 4 · 5 #15 91548 25 ACP
AND X-PRESS SHELLHOLDERS 2·4·19 7 · 8 · 9 · 10 · 11 · 19 #16 91549 7.62x54 R, 500 S&W
90933 140.00 M S R P 91622 41.00 #19 91552 40 S&W, 9mm Luger
COMES COMPLETE WITH ALL FEED TUBES, TUBE SUPPORTS, RISERS AND CASE SLIDER #20 91553 17 HORNET, 22 HORNET
#21 91554 6.8 Rem SPC, 224 Valkyrie

26 www.leeprecision.com

2022_Catalog_1227_.indd 26 12/30/21 3:52 PM

ON, INC.
ReLOADING22 APP PROCESSING ACCESSORIES

BULGE BUSTER KIT BREECH LOCK

FOR THE LEE APP
BULLET SIZING KIT
FOR THE LEE APP

INTAKE
FUNNEL
380 10/40 45 ACP

Lee APP Bulge Buster Kit

with appropriate Lee Factory
Crimp Die restores free function
of rimless cases that have low base Breech Lock
bulges. Low base bulges usually occur
Bullet Sizing Kit
from chambers that do not fully support the cartridge or cases resized
in carbide dies from manufacturers other than Lee. The kit includes the mounting body incorporating the Lee
See page 7 for corresponding
APP BULGE BUSTER KIT 91572 24.98 FACTORY CRIMP DIE
quick change Breech lock feature. The body accepts our new low
cost bullet sizing die. The new sizing die is high carbon steel and specially tapered to
reduce sizing effort. The sizing die is retained in the mounting body with a dual threaded
bottle adapter. Bullets are sized nose first; this is the most accurate and causes the

PRIMER POCKET SWAGE KIT

least distortion. Best of all no special top punches are required. Will seat and crimp
gas checks while sizing.
Great for powder coated or liquid lubricated bullets. All bullets must be lubricated,

DESIGNED EXCLUSIVELY FOR THE LEE APP PRESS order LEE LIQUID ALOX or your favorite coating.
91532 15.00
Now you can swage primer pockets ORDER BULLET SIZER AND PUNCH BELOW
as fast as you can operate the press lever BULLET SIZER AND PUNCH 12.00
The fastest, most convenient way to swage primer
pockets. Will swage large and small primer pockets
on any case up to 2 ½ inches (30/06) long. OPTIONAL Other sizes can be made on a custom basis.
CASE COLLATOR leeprecision.com/custom-breech-lock-bullet-sizer-punch.html
No shell holders required! #90667 pg 23
PART NO.   DIAMETER PART NO.   DIAMETER PART NO.   DIAMETER
Large and small swage punches included. 91505 .224 91514 .314 91523 .427
Exclusive, case guided swage push die works 91506 .225 91515 .323 91524 .429
without adjustment. It automatically aligns your 91507 .243 91516 .329 91525 .430
case mouth to receive the push rod and six guide
91508 .278 91517 .339 91526 .451
fingers center the primer pocket to the swage punch.
Nothing to adjust—simply install and begin swaging. 91509 .284 91518 .356 91527 .452
91510 .285 91519 .357 91528 .454
Swage adjustment
is a finger adjustable 91511 .308 91520 .358 91529 .457
knob, no tools 91512 .309 91521 .401 91530 .501
required. 91513 .311 91522 .410 91531 .510
APP PRIMER POCKET
SWAGE KIT
90237 51.00 UNIVERSAL CASE
EXPANDING DIE

NEW

APP Gently flares the case mouth

Breech Lock
Ram Prime
DEPRIME KIT to accept cast bullets without
shaving. Works great to pre-
Start priming in seconds,
nothing to adjust.
vent damaging the moly and
World's fastest, most low friction coatings found
Includes small and large
priming assemblies, no tiny
convenient deprimer. on today’s high performance
jacketed bullets. Includes neck
parts to fumble with or lose.
Effortless priming in
Universal, no shell plugs for .22 cal through .45 the tightest pockets.
UNIVERSAL CASE cal. Works on everything from Uses any brand shell holder.
holder required. FEED MAGAZINE the 22 Hornet to the largest
Safe with all brands of primers.
35.00 Ultra Mag. Costs so little and
. 91855 25.00 90242
works so well you can’t afford
Works in any Lee Breech Lock
Automates case feeding press or adapter.
process. Most handgun and to be without one.
short rifle, like the 223. 90798 18.00 91612 19.98

www.leeprecision.com 27

2022_Catalog_1227_.indd 27 12/30/21 3:52 PM

 CASE TRIMMER | QUICK TRIM | CONDITIONING TOOLS LEE PRECISION, INC.

TWO GREAT WAYS TO TRIM CASES Ltd. Prod. CASE Ltd. Prod.

QUICK TRIM CASE LENGTH GAUGE

QUICK QUICK LENGTH CASE LENGTH
TRIM DIE TRIM DIE GAUGE GAUGE
or
* Ackley Improved Cases
use standard parent cartridge
Case Length Gauge
16.00 20.00 8.00 13.00
17 Fireball 91347
17 Hornet 90611
17 Rem 90435

FOR SAFETY SAKE, TRIM YOUR CASES

204 Ruger 90439
218 Bee 91350 90225
219 Zipper 91305
SHELLHOLDER
The simplest way 22 Hornet 90354 90111
to check the case *22/250 90284 90116
and trim to the 220 Swift 91370 90118
correct safe length 221 Fireball 91364 90112
LOCK STUD CASE LENGTH GAUGE CUTTER
is with a 222 Rem Mag 91283
Lee Case Trimmer. 222 Remington 90340 90113
Lee Case Trimmer *223 Remington 90179 90114
223 WSSM 91358 90673
After a case has been loaded a few times, it will stretch beyond maximum length and must be 224 Valkyrie 90868 91339
trimmed. There is no better system to check and trim cases than with the Lee Case Length 225 Winchester 91280
Gauge and cutter. You don’t need an expensive caliper to set length and never waste even a 240 Weatherby Magnum 91281
single case setting up with the cut and try system common to all other brands. The piloted 243 Winchester 90320 90119
243 WSSM 91341 90389
cutter assures the case mouths are absolutely square and true to the case neck. Best of
25 WSSM 90221
all, the fixed length design assures it will never go out of adjustment. 25-20 Winchester 91385 90121
The Cutter and Lock Stud works for all calibers. You will need only one. The Case Length 25-35 Winchester 91306
Gauge (Pilot) and Shell Holder must be ordered as Case Length Gauge and Shell Holder 25-06 Remington 90334 90124
for each caliber— see chart listing at right and opposite page. You can trim cases by hand, 25-20 Winchester 90121
250 Savage (250/3000) 91374 90122
use an electric drill.
*257 Roberts 91357 90123
257 Weatherby Magnum 91342 91298
26 Nosler 90637 91307
260 Remington 90399 90993
CUTTER and LOCK STUD 90110 6.98 264 Winchester Magnum 91308
Fits cases up to .468” in diameter. 270 Weatherby Magnum 91279
LARGE CUTTER & LOCK STUD 90401 9.98 270 Winchester 90229 90128
Can be used on any case. 6.8 Western 91761
CUTTER only with BALL GRIP 270 Winchester Short Mag 90393 90117
90275 9.98 28 Nosler 91284
280 REM ACK IMPROVED 91375 91295
6.5 Weatherby RPM 91771
THREADED LARGE CUTTER 284 Winchester 91362 90129
AND LOCK STUD 90468 9.98 30-378 Weatherby Magnum 91309
Large cutter with 8–32 thread shank for use 30-40 Krag 91354 90137
30/06 Springfield 90291 90140
on popular powered case preparation centers.
*30/30 Winchester 90249 90136
300 AAC Blackout 90689 90443
3 Jaw Chuck Trimming Kit 300 H&H 90407
300 H&H or Ultra Magnum 90141
91720 29.00 300 HAM’R 91609
300 RSAUM 91343
300 Remington Ultra Magnum 91366
300 Savage 91356 90138
300 Weatherby Magnum 90408 90143
Hex shank fits popular, low-cost 300 Winchester Magnum 90441 90142
cordless screwdrivers. Includes cutter and 3 jaw chuck. 300 Winchester Short Mag 90484 90034
Universal 3 jaw chuck fits 25 ACP Order cartridge specific case length 303 British 90325 90144
to largest belted magnums without gauge separately. 303 Savage 91383
changing shellholders.
Chamfer Tool Must be used after Case Trimming. Unique design cuts
fast without chatter. One turn does the job. Chamfers and deburrs inside
Trim brass to the correct length while chamfering the case mouth and outside of case necks. Can also be used to remove the crimp from
primer pockets of military brass. Works better than tools costing several

QUICKTRIM
times as much. 90109 3.98
Primer Pocket Cleaner Double ended design cleans both large and
small primer pockets. Primers can be fully seated for better accuracy
and safety. Costs so little and works so well, no reloader can afford to
be without one. 90101 2.98
Lee Quick Trim Case Trimmer
Case Conditioning Kit Includes cutter and lock stud, chamfer
The Deluxe Quick Trim Case Trimmer quickly and precisely tool and primer pocket cleaner.
trims your brass to the correct length at the same time 90950 12.98
it chamfers the inside and outside of the case mouth.
Decapper & Base Easily removes crimped in primers
No calipers, measurement or adjustment required. Sim- from military cases. Guaranteed unbreakable.
ply install the appropriate quick trim die in your press
22 Caliber 90103 30 Caliber 90102 7.98
and start trimming. A click adjustable stop allows trim
length adjustment in .001 of an
inch increments. Allows the user to
shorten case to a uniform shorter The ultimate in case trimming, speed and convenience
length than standard, reducing Deluxe Power Quick Trim
trimming frequency. Includes snap Trim and chamfer in a matter of seconds. Hex
on chip catcher. Order appropriate shank snaps in to cordless screwdriver or drill
(sold separately) Includes power Quick-Trim
Quick Trim die for each cartridge adapter, chip catcher and deluxe cutter assembly.
listed on chart on upper right and To complete your trimming setup, order cartridge
opposite page. 90437 29.00 specific Quick Trim die from chart above and
opposite page. 90670 27.00
Cordless screwdriver pictured

28 www.leeprecision.com
is not included.

2022_Catalog_1227_.indd 28 12/30/21 3:52 PM

ON, INC.
ReLOADING22 TRIMMING TOOL CHART | BULGE BUSTER KIT

Prod. Ltd. Prod. CASE Ltd. Prod. Ltd. Prod. CASE Ltd. Prod.
LENGTH QUICK QUICK LENGTH CASE LENGTH QUICK QUICK LENGTH CASE LENGTH
UGE TRIM DIE TRIM DIE GAUGE GAUGE * Ackley Improved Cases TRIM DIE TRIM DIE GAUGE GAUGE
.00 16.00 20.00 8.00 13.00 use standard parent cartridge
Case Length Gauge
16.00 20.00 8.00 13.00
308 Marlin 91352 7 x 57 Mauser 90489 90130
308 Norma Magnum 91289 7 x 64 Brenneke 90236
308 Winchester 90231 90139 7-30 Waters 91335
32 Winchester Special 90491 7.35 Carcano 91293
225 32-40 Winchester 91376 91312 7.5 x 55 Swiss (Schmidt-Rubin) 90419 90132
305 325 WSM 91344 90222 7.5 x 54 MAS 91359 90051
327 Federal Magnum 91303 7.62 x 39 Russian 90345 90133
338 Edge 91313 7.62 x 54 Russian 90342 90147
338 Federal 90218 7.62 x 40 Wilson Tactical 91300
338 Lapua 90462 7.65 x 53 Mauser (Belgian-Arg) 91382 90134
283 338 Remington Ultra Magnum 91314 7.7 x 58 Japanese Arisaka 91368 90115
338 Winchester Magnum 90391 90149
*7mm Express/280 Rem. 90412 90166
340 Weatherby Magnum 91346 91223
673 7mm Remington Magnum 90297 90131
348 Winchester 91360 91304
7MM RUM 91333
35 Remington 90403 90150
280 7MM STW 91332
35 Whelen 91355 90972
281 7MM Weatherby Magnum 91334
350 Legend 91561 91567
7mm Winchester Short Mag 90314
350 Remington Magnum 91377 91315
389 7mm/08 90343 90167
358 Winchester 91318
221 7X64 Brenneke 91386
358 WSSM 91378
121 8x56 Aust-Hung Mannlicher 90589
375 H&H 90395
306 8x57 Mauser 90347 90148
375 H&H or Ultra Mag 90164
8MM Remington Magnum 91337
375 Ruger 90613 91285
121 8X68MM S 91288
375 Socom 91319
122 9.3x62 Mauser 90614 91299
375 Super Magnum 91320
9.3x74 R 91301
375 Winchester 91371 90165
22 TCM 91373
40-65 Winchester 91384 91323
307 5.7 x 28 FN 91363 90219
416 Rigby 91324
30 M1 Carbine 90365 90135
416 Ruger 91294
308 9mm Makarov 90181 90684
43 Spanish 91367
279 9mm Luger 90032 90153
444 Marlin 91372 90151
357 SIG 91317
45/ 70 Government 90458 90152
38 Super 90217
45/ 70 LEVERevolution 91287
380 Auto 90025 90155
450 Bushmaster 91325
284 30 Herrett 91297
450 Marlin 90554
295 7.62X25 Tokarev 91336
458 Lott 91326
32 ACP 91338
458 Socom 91290
129 32 S&W 91311
458 Winchester Magnum 91345 90971
309 32 Smith & Wesson Long 90169
50 Beowulf 91292
32 H&R Magnum 91310
90010
50 BMG REQUIRES LARGE CUTTER $23.00 32-20 Winchester 91365 90146
6.5 Carcano 91353 90043 38 S&W 90156
6.5 Creedmoor 90812 90814 38 Special 90085 90157
6.5 PRC 91348 91533 38-40 Winchester 91351 91322
6MM ARC 91665 38-55 Winchester 91379 90994
6.5 Grendel 90763 91278 357 Magnum 90088 90158
6.5 x 284 91361 357 MAX 91316
6.5 x 284 / 6.5 Rem Mag 90223 40 S&W 90033 90154
6.5 x 55 Swedish Mauser 90337 90126 10mm Auto 90193 90127
6.5-06 91108 38 Short Colt 91321
6.5 X 47 Lapua 91381 91330 41 Magnum 90226 90159
6.5 X 50 Japanese 91331 44-40 Winchester 91369 90168
6.5 X 57 Mauser 91291 44 Special 90107 90160
6.8 SPC 90397 90189 44 Magnum 90125 90161
6MM BR NOR/RE 91296 45 ACP 90073 90162
6mm Creedmoor 90658 91340 45 Colt 90145 90163
6MM PPC 91349 91282 45 GAP 91473
6mm Remington (244 Rem.) 90434 90120 454 Casull 90174 90992
6MM TCU 91286 460 S&W 90220
6MM XC 91328 480 Ruger REQUIRES LARGE CUTTER 90018
6X45MM 91329 50 Action Express 91327
6X47 Lapua 91380 91302 500 S&W REQUIRES LARGE CUTTER 90178 90019
UNLISTED RIFLE QUICK TRIM DIES can be custom made. UNLISTED CASE LENGTH GAUGES can be custom made.
leeprecision.com/custom-rifle-quick-trim-die-body.html leeprecision.com/custom-case-length-gauge.html

Catch

LEE BULGE BUSTER

Container
NEW Ram Swage
Primer pocket swager
works so fast that
you’ll want to swage Assure your mixed brass is bulge free with the Bulge Buster
all the range brass Kit and appro­priate Lee Carbide Factory Crimp Die. This
Utilize all
you pick-up. Works your brass push through die adapter will quickly remove the annoying
on all single stage by bulge rings that shell holder constrained dies simply can’t
presses with ⅞”-14 removing
annoying reach. The Bulge Buster Kit includes extension sleeve, push
threads and accepts bulge rings through punch, catch container and complete instructions.
universal press shell And it’s fast — you can reprocess your cases as quickly
holders. Features Push Extension
spring assisted case
as you can handle them. CARBIDE FACTORY CRIMP DIES, SEE PAGE 7 through Sleeve
Punch
extraction, and an Bulge Buster Kit 90487 19.98
all steel case guide, ensures cases will
90867 380 ACP
be positively centered on push rod. Shell BULGE BUSTER KIT shown
WITH THE
mounted to Breech Lock 90862 10 mm
holderless design, allows you to swage LEE FACTORY CRIMP DIE,
Reloader Press ( 90045 ). 90862 40 S&W
any small or large primer pocket, without Sold separately, pg. 18 THE BULGE BUSTER
90416 41 AE WILL REPAIR
swapping to a different size shell-holder.
90864 45 ACP ALL THESE
91617 50.00 90864 45 GAP RIMLESS CASES
90864 45 Win Mag
www.leeprecision.com 29

2022_Catalog_1227_.indd 29 12/30/21 3:52 PM

 ACP
APP AUTOMATIC
AUTOMATICCASE PRIMING PRESS
PROCESSING LEE PRECISION, INC.

NEW SHOWN WITH

UNIVERSAL CASE FEED MAGAZINE
Sold separately #90242

acp
AUTOMATIC CASE PRIMER
M etallic cartridge priming
was revolutionized in 1979 with Richard
Lee’s patented Auto Prime tool. Today, the
majority all hand-held priming tools share most,
if not all, features of the Original Auto-Prime.
The new ACP truly automates priming. Think
of it as the “Real” AUTO-prime. This is the
nicest priming tool ever made. No shell holders
required; cases are guided into position by
our new “finger guide” — priming is positive,
effortless and uniform. Positive and consistent
seating depth is assured with our new dead
length priming device. Primers are seated
uniformly without “feel” or adjustments
required. Seating is almost effortless
as the priming tool shares the powerful
linkage of our Automatic Processing Press. Pictured ACP mounted to
And the best feature is the ability to LEE RELOADING STAND
Sold separately #90688
automatically feed cases! Nothing else to
buy—will seat large and small rifle and pistol
primers. Automatically feeds and primes
cases up to 2 ½ inches long.
ACP ▾ AUTOMATIC CASE PRIMER
91610 140.00
Pictured with CASE COLLATOR #90667
Sold separately pg. 23

Depriming Kit
Use your ACP as the world’s
fastest, shellholderless
deprimer. Great for those who
tumble clean cases before
reloading. Includes screw top
catch bottle for spent primers
and debris.
91714 12.00

THE NEXT REVOLUTION

IN PRIMING.
THE WORLD’S FIRST
AUTOMATICALLY
CASE FED,
SHELL HOLDER-LESS
PRIMING TOOL

30

2022_Catalog_1227_.indd 30 12/30/21 3:52 PM

ON, INC.
ReLOADING22 BENCH PRIME | HAND PRIME | SHELLHOLDERS

O F F P R E S S P R I M I N G
New Auto -Prime

AUTO BENCH PRIME The original and world's most

popular hand-held priming

T HE EASIEST, MOST CONVENIENT

BENCH MOUNTED PRIMING tool ever.
Symmetrical design allows effortless right
tool. Fast and economical hand
held priming with unmatched
feel and accuracy. Comes
or left hand operation. Comfortable lever packed in a convenient storage
with just the right amount of mechanical box to keep your tool and shell-
advantage effortlessly seats even the most holders together.
difficult primers with just finger 90230 31.98
pressure. Perfect mechanical advantage
to feel the primer seating completely home
into the primer pocket.
Includes priming assemblies for large and Tray’s built-in flipping surface quickly rights and orients
primers—go from box to priming in seconds. Patented
small primers. Change primer size or shell elevator pin safely isolates a single primer for priming. COMFORT
holder in seconds. Allows most primer brands and types to be safely tray fed. GRIP
Includes the patented folding tray — go The convenient hinged cover allows you to individually feed
primers if restricted by the primer manufacturer.
from box to priming in seconds. No need for
a heavy bench; fits the Lee Bench Plate or Auto Bench Prime
mount to a board for a portable setup. 90700 43.98 Save even more! Purchase a kit!
Priming Tool Kit
Folding Primer Tray Includes the New Auto-Prime, and
nice molded storage box. Holds
TWO PACK 90606 8.00 everything, including a complete set
New, removeable tray PATENTED
of shell holders. This kit comes with 8
of the most popular priming tool shell
holders, works with over 130 different
cartridges. 1, 2, 3, 4, 5, 11, 12, 19.
Holds an additional 8 shell holders.
This kit is a convenient way to keep
your tool and shell holders all in one
spot.
90215 47.98
Unfold tray and place Flip tray over to Shake tray to upright all the Slide the flow control Priming Tool Storage Box
on top of box of deposit the primers. primers. Fold and close cover. to L O C K. Holds your New Auto Prime tool. With
100 primers. room for 18 priming tool shell holders.
90426 5.98
V
Set of Shellholders # 1 · 2 · 3 · 4 · 5 · 7 · 8 · 9 · 10 · 11 · 19
FOR Eleven of the most popular sizes fit over 115 RED STORAGE BOX ONLY 90196 4.98
SHELL PRIMING TOOL different cartridges. The chart ( below )
SHELL HOLDER SET 90198 25.98
HOLDER SHELL HOLDERS is included with each shell holder set. with 11 Shellholders for LEE PRIMING TOOLS
Packed in a
3.98 lifetime plastic box Additional cartridge listings on
leeprecision.com
AND THESE OTHER FINE TOOLS—K&M, SINCLAIR,
F A PLATINUM, CPS, 21ST CENTURY

#1 90201 ALL OFF-PRESS PRIMING

l TOOLS USE SPECIAL, BUT INEXPENSIVE PRIMING TOOL SHELL HOLDERS,
#2 90202 SO THERE’S NO NEED TO ENDLESSLY SWAP PRESS SHELL HOLDERS TO PRIME.
#3 90203 HOLDER RIFLE HOLDER RIFLE HOLDER RIFLE HOLDER RIFLE HOLDER PISTOL
#4 90204 20 17 Hornet 2 250 Savage 12 7.62mm x 39 2 35 Remington 7 32 ACP
3 25/35 16 7.62x54 Russian 5 35 Winchester
#5 90205 4
4
17 Remington
204 Ruger 4 25/45 Sharps 3 30 Herrett 2 35 Whelen
4 32 Colt N.P.
4 380 Auto
#6 90206 4 22 TCM 2
5
257 Roberts
257 Weatherby
3
2
30/30 Win. (30 WCF)
300 Savage
5
3
350 Rem. Mag.
356 Winchester
19 9mm LUGER
20 22 Hornet 1 38 S & W
#7 90207 20 22 K Hornet 2 6mm Creedmoor 16 30/378 2 358 Winchester
1 38 Colt N.P.
3 22 Savage 2 6.5mm Creedmoor 21 30 Remington 5 358 Norma Magnum
#8 90208 2 22 BR 2 6.5mm 06 2 308 Win. (7.62 NATO) 3 375 Winchester 19 38 Super Auto
6 218 Bee 2 6.5mm x 57 4 300 AAC Blackout 5 375 H & H 19 38 ACP
#9 90209 12 22 PPC 3 6.5 x 55 Mauser 5 30/40 Krag (30 U.S.) 5 375 Weatherby 1 38 Short Colt
10 6.5 Jap 2 30/06 Springfield 5 375 Ultra Magnum
#10 90210 3
10
219 Zipper
220 Swift 5 6.5 Rem. Magnum 5 300 H & H 5 375 Ruger
1 38 Long Colt
1 38 Special · 357 Mag
#11 90211 4 221 Fireball 2
12
6.5 Carcano
6.5 Grendel
5
5
300 Weatherby
300 Win Magnum
14
3
38/40 Win.
38/55 Winchester
19 357 Sig
4 222 Remington
2 357 Auto Magnum
#12 90212 4 222 Rem. Magnum 5 264 Win. Magnum 5 300 Ultra Magnum 8 40/82 Winchester
19 40 S&W · 10mm Auto
4 223 (5.56mm) 5 26 Nosler 5 300 Win S Magnum 5 416 Remington
#13 90213 5 223 WSSM 21 6.8 SPC 5 308 Norma Magnum 25 416 Rigby 1 41 Long Colt
2 224 Clark (22/257) 2 270 Winchester 5 303 British 18 43 Mauser 19 41 Action Express
#14 90272 21 224 Valkyrie 5 270 Weatherby 2 7.7 Japanese 17 43 Spanish 9 41 Magnum
5 270 Win S Mag 3 32 Win. Spc’l 14 44/40
#15 90017 10
2
225 Winchester
22/250 2 280 Remington 3 32 Win. S.L. 11 444 Marlin
11 44 S&W Spl · 44 Mag
11 44 S & W Russian
#16 90200 2 240 Weatherby 2 7mm/08 6 32/20 (32 W.C.F.) 8 45/70 Gov’t
2 44 Auto Mag.
2 243 Win. 2 7mm BR 3 32/40 Winchester 2 450 Bushmaster
#17 N/A 5 243 WSSM 4 7mm TCU 2 8 x 57 Mauser 5 458 Win. Magnum
2
11& 14
45 Auto
45 Colt
2 6mm Remington 3 7 x 30 Waters 2 8mm 06 HOLDER PISTOL
#18 N/A 2 244 Remington 2 & 10 7 x 57mm Mauser 2 8mm Man. Schoe. 15 5.7 x 28 14 45 Schofield
2 6mm Int’l 5 7 x 61 Sharpe & Hart 5 8mm Rem. Magnum 1 22 Rem. Jet 11 454 Casull
#19 90023 2 6mm/284 5 7mm Rem. Magnum 17 8mm Lebel 15 25 ACP 14 460 S&W
5 7mm Win S Mag 16 8x56R Hungarian
#20 90020 2 6mm/06
5 7mm Weatherby 8 33 Winchester
1
19
256 Win. Magnum
30 Luger
5 455 Webley
12 6 PPC 13 45 Auto Rim
#21 90031 4 6 x 47 (6mm/222M) 5 7mm Ultra Mag 25 338 Lapua 19 30 Mauser
3 45 Win. Magnum
2 25/284 2 284 Winchester 5 338 Win. Magnum 4 32 Short Colt
#24 91495 5 25/303 3 7.5mm Schmidt-Rubin 5 338 Ultra Magnum 4 32 Long Colt 5 & 16 480 Ruger
7 30 M 1 Carbine 5 340 Weatherby 4 32 S & W 5 475 Linebaugh
2 25/06
#25 91496 6 25/20 Winchester 3 7.65x53 Arg. Mauser 8 348 Win. 4 32 S & W Long 16 500 S&W

www.leeprecision.com 31

2022_Catalog_1227_.indd 31 12/30/21 3:52 PM

 DELUXE PERFECT POWDER MEASURE | SAFETY SCALE | POWDER MEASURES LEE PRECISION, INC.

INCLUDES THE NEW POWDER MEASURE BOTTLE ADAPTER

DELUXE PERFECT
POWDER MEASURE
.

QUALITY CONSTRUCTION
This powder measure features a high pressure die cast, diamond-machined body. Lee Safety Scale
The precision-machined rotor drum is cast from brass, which is naturally anti-static
and spark proof. Safety and accuracy are the
most important features
ELIMINATES CUT POWDER AND JERKY ACTION
A soft elastomer wiper strikes off the metering chamber rather than cut the powder. This is the only scale that can never get out of adjustment.
You’ll be surprised at how smoothly the rotor operates. More importantly, you will The beam is made from a very tough phenolic, the same
enjoy the most uniform of charges.
type material used on table and counter tops. Phenolic is
EASY TO SET & READ MICROMETER METERING tough but, like glass, it can’t be bent. Even if dropped you
CHAMBER Powder charge adjustment is accomplished with a true can feel confident that if it did not break it is still accurate.
micrometer adjustable metering chamber. The metering chamber is aluminum
with a black anodized finish. Features a crisp, permanent, laser engraved scale. The Sensitive and readable to 1 / 20 grain.
brass micrometer thimble is engraved with .01cc graduations and has a releasable 90681 46.98
detent lock. With most rifle powders each click is about a 1/10 of a grain, perfect
for working up a load. READ THIS if you already have a combination
bullet and powder scale
CHANGING POWDER IS FAST AND EASY Try this simple test to see how sensitive your scale
Features easily removable hopper with an on/off valve so you can quickly return really is. Cut a piece of regular writing paper or this
unused powder to its original container or switch to another type. The hopper feeds catalog 5/16 inch square. With scale set on zero
to a pre-measuring chamber allowing precise charges regardless of the powder level — drop the paper on the pan to see if it moves. It
in the hopper, eliminates the need for an extra powder baffle. should read about .1 grain. Keep adding paper squares until
it does move. The total number of squares needed to move
QUICK CHANGE DRUMS your scale is your scale’s sensitivity. We have seen digital
One of the nicest features is the ability to use the new Lee standard quick-change powder scales that are only sensitive to 1/2 grain (FIVE paper
drums (product # 90453). These low cost drums can be preset to your favorite squares!) A Lee Safety Scale will move with the first paper.
charge and swapped out in seconds.

DELUXE PERFECT POWDER MEASURE 90699 90.00

CARTRID
PICTURED ON OPTIONAL
STAND # 90587,
NO POWDER MEASURE, USE

SOLD SEPARATELY REGARDLESS OF PRICE, Lee Powder SIMPLE

HAS ALL THE FEATURES OF THE Measure Kit
LEE DELUXE POWDER MEASURE CONSIS
Fifteen uniformly graduated and proportioned Powder Funnel WIPER T
powder dippers. Slide card shows the grains of PREVEN
A large, unbreakable funnel SHEARI
powder each measure will dispense of every type
PERFECT FOR USE WITH THE of powder. Powder measures are inherently safe
that fits all cases from .22 SWIVEL
DELUXE PERFECT POWDER MEASURE as they cannot get out of adjustment. That’s why
to .45 caliber. Hole in flange FOR FAS
TRANSF
permits mounting to the
& AUTO-DRUM powder dippers continue to be the first choice of
Lee Turret Press, shelf or ON/OFF
reloaders who load in small quantities.
QUICK CHANGE DRUM SET features four precision molded nylon drums. Two small capacity for bench.
90100 14.98
cases as small as the 25 ACP, adjustable to 223 size rifle cases. Large capacity drums adjustable 90190 4.98
from 223 case to cases as large as the belted magnums. The large drums include an insert to
allow reduced capacity charging like the small drum. All drums are infinitely adjustable within
range. No tools required for adjustment. A graduated adjustment key is included with each drum.
Each key is marked with .01cc graduations, allowing easy 1/10-grain powder adjustments.
INCLUDES THE NEW POWDER MEASURE BOTTLE ADAPTER
Quick Change Drum Set 90453 20.00

POWDER MEASURE BOTTLE ADAPTER TheOriginal

Powder measure bottle adapter fits all Lee powder measures
Allows dispensing powder directly from the shipping container of most popular powder Perfect Powder Measure
manufactures. Includes a crystal clear bottle that holds over a half a pound of ball powder.
Works on all of these and many more. Almost as good as a scale!
(53mm or 43mm thread)
Solves problems common
Dispensing powder directly from
the bottle assures positive iden- to ordinary drum type measures.
tification of the powder type. Gives you the confidence
Adapter is manufactured from that your charges will be
Polypropylene —resistant to attack from all the most uniform possible.
types of powder. Now you can turn off the powder flow and store your powder in its
original container with no fear of misidentifying or damage to your hopper from chemical Lee Perfect
attack. Viewing window allows monitoring powder level in use without removing bottle. Powder Measure
Bottle Adapter 91586 8.00 Includes many of the features of the
Deluxe Perfect Powder Measure, but
Powder Measure Stand the body is molded from an engineering
Heavy, powder coated steel construction grade polymer. Rotating micrometer
7/8” mounting hole for all popular measures adjustable metering chamber and
Includes 3 no slip feet elastomer wiper to prevent powder
Rock solid mount improves measure consistency cutting. Works better than other powder
Space saving freestanding design measures priced four times as much.
is portable and convenient. 90058 30.98
Works with other brands of powder measures
FREE STURDY STEEL MOUNTING BRACKET
Powder Measure Stand 90587 45.00 INCLUDED WITH EACH MEASURE

32

2022_Catalog_1227_.indd 32 12/30/21 3:52 PM

ON, INC.
ReLOADING22 PRO AUTO DISK | AUTO DRUM POWDER MEASURES
CHARGE CASES WHILE
EXPANDING +the+ CASE MOUTH
“modern reloading” and all popular
AUTO DRUM
Automatic case actuated drum powder measure. Accurately and automatically
lee die sets include load data dispense powder in your favorite cartridge. Two infinitely adjustable drums
included. Quick Change drums will accurately and reliably drop charges from
1 to 80 grains of powder.
Lee Pro Auto-Disk
Powder Measure INCLUDES THE NEW POWDER MEASURE BOTTLE ADAPTER
Commercial reloaders or competitive shooters first Case actuated; never spill a charge.
choice! Elastomer wiper and polytetrafluoroeth-
Exclusive elastomer wiper prevents powder shearing,
ylene (PTFE) non-stick metal casting make this the
works great with difficult metering extruded powders.
smoothest operating measure. Large hopper with
integral shut-off valve makes changing powder or Machined body with labyrinth groove mates to precision
disks super convenient. Brass thumbnuts attach the molded nylon drums providing leak free fit with
hopper to the body so you can change disks with no the finest powders.
tools. Rubber wiper and seal prevents powder shearing Drum is actuated by a steel sector and pinion gear train.
and makes it more leak-resistant with fine-grain pow-
ders. Increased safety with positive pull-back lever. Quick-change hopper has on/off valve Sleek modern design,
The measure is attached to the die with a swivel all gears springs and levers inside the die cast housing.
adapter, allowing easy positioning and quick removal Same swivel adapter as our famous Pro Auto-Disk powder
when changing cartridges. Included positive pull measure. Makes moving measure fast and convenient.
back lever reduces the chance of double charge when
progressive reloading. HANDGUN AND RIFLE DRUMS INCLUDED.
Lee Pro Auto-Disk Powder Measure AUTO-DRUM POWDER MEASURE
INCLUDES ALL FOUR DISKS 90811 55.00
90429 60.00
AUTO-DRUM POWDER MEASURE
CARTRIDGE RANGE 25 AUTO TO 300 WIN MAG
PRO AUTO-DISK POWDER MEASURE
USE IDEAL FOR BOTH HANDGUN AND RIFLE
CARTRIDGE RANGE 9 MM TO 45 COLT
INFINITELY ADJUSTABLE WITH INCLUDED
USE IDEAL FOR HANDGUN ADJUSTABILITY SMALL AND LARGE
QUICK CHANGE DRUMS
SIMPLE SET UP
NOTHING TO ADJUST, NOTHING TO GET OUT OF ADJUSTMENT
USE LEE PUBLISHED LOAD DATA EXTREMELY CONSISTENT
CONSISTENCY .01 CC INCREMENTAL CHARGE
CONSISTENCY EXTREMELY CONSISTENT INCREMENTAL CHARGES ADJUSTMENT

WIPER TO WIPER TO PREVENT

POWDER SHEARING
YES
PREVENT POWDER YES
SHEARING
SWIVEL ADAPTER FOR
SWIVEL ADAPTER FAST, EASY TRANSFER YES
FOR FAST, EASY YES
TRANSFER
ON/OFF VALVE YES
ON/OFF VALVE YES

The Pro Auto-Disk comes with a complete set of four disks.

Each disk has six cavities, so you get 24 cavities Powder Measure
in all. The chart included on the rear of the instruction sheet Riser
lists the capacity of each cavity with every type of powder.
If you reduce your charge 10% you can safely use this data without Installs between the Lee
weighing your charge. Fixed cavities are the safest way to meter powder Powder through Expanding
because they can’t be misadjusted or get out of adjustment. Die or Rifle Charging Die and
Powder Measure. Allows
NOTE Pro Auto-Disk
PRO AUTO-DISK convenient use of other
and Auto-Drum Powder
ACCESORIES Lee Rifle brands of dies that have
Measures must be used
extended adjusting screws
Charging Die Kit
e Short and Long Charging Dies
and provides clearance for
with the powder through
expanding die supplied with
the Lee Safety Prime.
are included. These dies work all Lee pistol dies, or Lee
Powder Measure Riser Rifle Charging Dies (see left).
the same as the pistol powder 90041 9.98 These dies may be purchased
through expanding dies, except
es. they do not expand the case individually. Sizes listed on
mouth. Rifle case expansion is page 8.
Adjustable Charge Bar done in the sizing die. Can be
Infinitely adjustable between .28
used on 22 caliber, and up to the POWDER Only Lee Dies
and 1.6 cc. Lifetime nylon with
solid brass, zero backlash microme- largest belted magnums.
THROUGH
EXPANDING DIE
permit charging
ter. Easy to set. Charging Die kit pg. 8 the case while
Adjustable Charge Bar 90995 28.00 expanding the
90792 9.98
SHORT CHARGING DIE case mouth.
22 HORNET TO 223 REM
Double Disk Kit (not pictured) 90668 15.98
This kit raises the hopper so you can LONG CHARGING DIE
stack two disks. Not only doubles the 223 REM TO 300 WIN MAG
capacity of the disks but it makes 90194 15.98
very fine adjustments possible. Most
powders can be adjusted up or down
.1 grain with different combinations
of disks. Complete listing of combina-
tions, 4 extra disks, screws and risers
are included.
Lee Double Disk Kit
90195 14.98

www.leeprecision.com 33

2022_Catalog_1227_.indd 33 12/30/21 3:52 PM

 ELECTRIC MELTERS LEE PRECISION, INC.

UNIQUE
INFINITE
HEAT CONTROL
WELECTRIC MELTERS A highly reliable control,
mounted away from
the high heat of the
pot. Eliminates failures
usually associated with
thermostatically
controlled units.
Thermal feed back to
the infinite control
permits heater
to put out full power
until metal has melted.

Magnum Melter
Lee Pro 4–20 Large 4” diameter pot allows easy access for the ladle caster.
Large diameter high capacity pot, holds approximately 20 pounds of Same high efficiency design that has made Lee pots the most
lead. Nearly 4 inches of clearance under the spout accepts all brands popular. Melt time is less than 20 minutes with just 700 watts.
of bullet molds and most sinker molds. It also includes an adjustable 20-lb. capacity for the longest casting session.
mold guide to quickly and accurately position any mold for pouring. Magnum Melter 110 Volt 90949 89.00
This second generation design incorporates the famous Lee patented
high-efficiency design and dependable remote sensing thermostat, in a
dust tight housing. Long life 700-watt tubular heating element assures
quick melting and rapid recovery. Micro adjustable, flow control valve
adjusts instantly with a twist of the screwdriver. Front mounted low
maintenance replaceable valve spout allows instant reseating with a
turn of a screwdriver.
LEE PRO 4-20 90947 110 Volt 115.00
Lee
MAKES
EXPORT MODEL 90948 220 Volt 123.00

BULLET
CASTING
EASIER
ß
Lee Precision Melter
Lee Production Pot IV
High speed melter with an infinite heat control for the budget
Large, deep pot holds approximately 10 pounds of lead. Melt time is less than 20
caster. Easily handles 4-cavity molds. Takes less than 15 minutes
minutes. Pour spout up front where it belongs so you can see what you’re doing. Infinite
to melt 4 pounds of metal. Same infinite heat control as used
heat control. Uses only 500 watts of power during heat-up and a lot less to maintain
on the Production Pot. 500 watts AC only. Guaranteed 2 years.
temperature. Large, stable base for safety. 4’’ of clearance under the spout is high
PRECISION MELTER, 110V 90021 64.98 enough to accept all brands of bullet molds and most sinker molds.
EXPORT MODEL, 220V 90024 67.98 PRODUCTION POT IV 110 VOLT 90009 99.98
EXPORT MODEL 220 VOLT 90008 104.98
LEE MOLD MALLET
Features ash hardwood construction. LEE INGOT MOLD LEE LEAD LADLE
Cut the sprue and release the bullets Use to cast 1/2 and one pound ingots. A convenient size ladle for bullet casting.
with one handy tool. Ergonomic design Perfect for remelting and alloying. Wood Works equally well for right and left handers.
makes it convenient and comfortable to handles stay cool. Aluminum mold is Handy for skimming and stirring metal.
use with long casting sessions. Mallet is lightweight and rustproof. 90026 6.98
10 inches long. 90029 20.98
90084 10.00

WARNING Melting lead and casting lead objects will expose you and
others in the area to lead, which is known to the State of California to cause
reproductive harm and cancer. For more information, www.P65Warnings.ca.gov.
See instructions on REDUCING EXPOSURE supplied with product.
34

2022_Catalog_1227_.indd 34 12/30/21 3:52 PM

ON, INC.
ReLOADING22 LUBRICATION & SIZING

BREECH LOCK BULLET SIZER KIT

FASTEST AND EASIEST WAY TO SIZE CAST BULLETS
BULLET CLASSIC
BULLET SIZER & BULLET
Breech Lock Bullet Sizer Kit RELOADER PRESS DIAMETER PUNCH SIZING KIT
works in any Breech Lock Press. Uses shown with optional 12.00 25.98
bottle adapter →
inexpensive bullet sizer and punch, see .224 91505 90049
listing right. 
91151 6.00
Includes bottle that holds .225 91506 90036
The quick change body accepts our new, 100 bullets. Adapter .243 91507 90083
low cost bullet sizer and punch. The new also fits most powder
containers for larger .278 91508 90261
sizer is produced of high carbon steel, and
capacity. .284 91509 90170
specially tapered to reduce sizing effort.
.285 91510 90171
Bullets are sized nose first—this is
the most accurate and causes the least .308 91511 90037
distortion. .309 91512 90038
Best of all, no special top punches are .311 91513 90039
required. Will seat and crimp gas checks GET INCREDIBLY FAST .314 91514 90044
while sizing. BULLET SIZING Order bullet sizer .323 91515 90686
with the LEE APP
Great for powder coated or liquid and punch right 
See pg. 27
.329 91516 90934
lubricated bullets. All bullets must be Bullet Sizer and Punch .339 91517 90576
lubricated, order Lee Liquid Alox 12.00
or your favorite coating. Order .356 91518 90046
appropriate bullet sizer and .357 91519 90047
punch, see listings at right. .358 91520 90048
Breech Lock Bullet Sizing Kit .401 91521 90060
91532 15.00 .410 91522 90052
Other sizes can be made on a custom basis. See web for details.
leeprecision.com/custom-breech-lock-bullet-sizer-punch/
.427 91523 90053
.429 91524 90054
Classic Bullet Sizing Kit .430 91525 90062
Standard ⅞ x 14 threads fit any reloading press. .451 91526 90061
Bullets are pushed through the sizing die nose first, so no special nose punches .452 91527 90055
are needed. Gas checks are auto­matically seated and crimped in place. Sized .454 91528 90056
bullets captured in the special container. COMPLETE FOR ONE SIZE 25.98 .457 91529 90057
BULLETS MUST BE LUBRICATED FOR SIZING. .458 91591 91682
( PRESS NOT INCLUDED) ORDER LEE LIQUID ALOX BELOW
.459 91616 91672
GOOD FOR THOUSANDS OF BULLETS.
.460 91592 91829
Other sizes can be made on a custom basis.
See web for details. .501 91530 90191
leeprecision.com/custom-lube-and-sizing-kit.html
.510 91531 90188

L U B R I C AT I N G B U L L E T S
Traditional bullet lubricating methods of placing
lube only in the grooves are inferior to the modern

Trywith
this The bullet melts method of coating the entire bullet with Lee Liquid
while the Alox. This places the lube where needed, on the
surfaces that rub against the bore.
your Lee Liquid Alox
Gently shake
bullet lubricant clings tenaciously
to the bullet bullets in an
orbital motion to
coat the bullets. If
Lee Liquid Alox Enough for thousands of bullets they do not coat
Lee Liquid Alox gives better accuracy because it eliminates leading. The lube completely, add a
coats the entire bullet like a thin jacket and dries to a soft, varnish-like finish little more lube.
that really clings. The dried coating does not degrade gun­powder. Easy to apply;
Spread bullets
eliminates the need for sizing of most cast bullets. While it works well with all onto waxed paper
cast or swaged bullets better than any other lube, it works most ecomonically and let dry
with micro band bullets, which are designed for tumble lubing. overnight.
4 OZ. DISPENSER BOTTLE 90177 6.98

Universal Case Expanding Die Hardness Testing Kit

Gently flares the case mouth to accept cast bullets without Featured product in Chapter 10 “Modern Reloading.” No
shaving. Works great to prevent damaging the moly and low more wasted components shooting too soft or too hard
lead. Cast and load with confidence knowing your alloy
friction coatings found on today’s high performance jacketed
is up to the job. Quickly and precisely check hardness
bullets. Includes neck plugs for .22 cal through .45 cal. Works of your lead alloy. Exclusive conversion chart tells the
on everything from the 22 Hornet to the largest Ultra Mag. Costs maximum operating pressure of any lead alloy.
CALIBRATED HARDENED STEEL BALL INDENTER
so little and works so well you can’t afford to be without one. 90924 99.00 I N C L U D E S V” BLOCK CRADLE SNAPS INTO STANDARD PRESS RAM
90798 18.00 20 POWER 4 LENS OPTICAL MEASURING MICROSCOPE

www.leeprecision.com 35

2022_Catalog_1227_.indd 35 12/30/21 3:52 PM

 RIFLE BULLET MOLDS LEE PRECISION, INC.

MOLD NUMBER CODE

LE
DOUBLE CAVITY MOLDS
C 309 230 R
GAS DIAMETER WEIGHT POINT SHAPE
Handles and sprue plate included.
HOLLOW BASE MOLDS
39.98

CHECK IN GRAINS
TL
Micro Band
WC
WAD CUTTER
These are available in single cavity only. They have self centering
automatic core pins for the fastest possible molding. Handles and
SWC
sprue plate included. 50.98
SEMIWAD CUTTER
RF
SIX CAVITY COMMERCIAL QUALITY MOLDS
ROUND WITH FLAT These are made for heavy duty volume production. The mold
R
1 OGIVE RADIUS blocks have steel bushing and alignment pins for lasting
2R precision. Price includes a cam operated sprue plate to elim-
2 OGIVE RADIUS LEE MOLD BLOCKS MADE FROM inate the pounding common to ordinary molds. The sprue
TC
TRUNCATED CONE ALUMINUM BECAUSE OF THE plate is hard anodized and held down with wave washers
EXCEPTIONAL MOLDING QUALITIES at each end. No finer mold can be purchased at any price.
Handles extra. 64.00
MOLD CAVITIES CNC–MACHINED MOLD HANDLES
FOR UNMATCHED ROUNDNESS AND BALLISTI
SIZE CONTROL Precision steel mold handles fit not only the Lee Six Cavity molds COEFFICIE
and 18 Cavity Buckshot molds, but most other brands of one MOLD
MOST BULLETS FROM LEE MOLDS and two cavity molds. Priced low enough so you can have a set DOUBL

CAN BE USED AS CAST WITHOUT for every pair of blocks. 6 CAVIT

SIZING 90005 26.98 LUBE&SI
BL BULL
SIZER

MICRO BANDS USUALLY REQUIRE NO SIZING

TRADITIONAL GROOVE MICRO BAND GROOVE The bullet shank has many shallow grooves for maximum liquid lubricant
FOR LIQUID ALOX #90177
This type of lubrication groove is retention. A great way to make bullets in quantity with minimum time,
designed for old style hard lubricants. The reduced friction of the micro bands
effort and equipment. More accurate than ordinary cast bullets. The
Also works well with Lee Liquid Alox. allow a higher velocity with the same
reduced friction of the micro bands gives you more velocity with less
pressure as conventional lube grooves.
pressure.

R I F L E B U L L E T M O L D S
22 CAL 270 7mm 30 CALIBER RIFLE BEST SUBSONIC
REQUIRES FAST TWIST RIFLING
7.62 X 39 303 B BALLISTIC
Bullet Design C.E. COEFFICIEN
MOLD
DOUBLE
6 CAVIT
LUBE&SIZ
BL BULLE
SIZER

BALLISTIC .155 .310 .305 .154 .163 .224 .252 .268 .317 .352 .688 .268 .276 .247
COEFFICIENT
MOLD C225-55-RF C277-135-RF C285-130-R C309-113-F C309-120-R C309-150-F C309-160-R C309-170-F C309-180-R C309-200-R TL309-230-5R C312-155-2R CTL312-160-2R C312-185-1R
DOUBLE 90451 90454 90360 90362 90364 90366 90367 90368 90369 90370 90307 90385 90361 90371
6 CAVITY 90459 90741 90579
LUBE & SIZE 90036 90261 90171 90038 90038 90038 90038 90038 90038 90038 90038 90039 90039 90039 BALLISTIC
BL BULLET COEFFICIEN
SIZER 91506 91508 91510 91512 91512 91512 91512 91512 91512 91512 91512 91513 91513 91513 MOLD
DOUBL
8mm 8 x 56 338 CAL 35 REM 375 Win 38/55 45 - 70 CALIBER RIFLE 50 -70 CAL 6 CAVIT
LUBE&SI
HOLLOW BASE BL BULLE
SIZER

BALLISTIC .216 .361 .250 .186 .250 .211 .225 .250 .250 .278 .443 .220 .283
COEFFICIENT
MOLD C324-175-1R C330-205-1R C338-220-1R C358-200-RF 379-250-RF 457-340-F 457-405-F 459-405-HB 457-450-F C457-500-F 459-500-3R 515-450-F 515-500-F
DOUBLE 90274 90775 90372 90449 90324 90373 90374 90375 90376 90577 90255 90266 BALLISTIC
COEFFICIEN
6 CAVITY 90016 MOLD
HOLLOW 90268 DOUBL
LUBE & SIZE 90686 custom 90576 90048 custom 90057 90057 custom 90057 90057 custom custom custom 6 CAVIT
BL BULLET
91515 custom 91517 91520 custom 91529 91529 custom 91529 91529 custom custom custom LUBE&SIZ
SIZER
BL BULLE
SIZER
36

2022_Catalog_1227_.indd 36 12/30/21 3:52 PM

ON, INC.
ReLOADING22 PISTOL BULLET MOLDS
LEE MOLDS FEATURE

TROCHOIDAL VENTING
Unique venting on the mold
face and sprue plate mating
surface allows consistent
and effortless fill out.

   P I S T O L B U L L E T M O L D S
32/20 · 32S&W LONG · 32 COLT NP 38 SPECIAL • 38 S & W • 38 COLT NEW POLICE • 357 MAG
WORKS GREAT
IN 9MM LUGER

BALLISTIC .125 .174 .100 .106 .116 .142 .072 .072 .131 .117 .117 .207 .160
COEFFICIENT
MOLD 311-93-1R 311-100-2R TL314-90-SWC 358-105-SWC 358-125-RF 358-140-SWC TL358-148-WC 358-148-WC 358-150-1R TL358-158-SWC C358-158-SWC TL358-158-2R 358-158-RF
DOUBLE 90300 90301 90311 90316 90574 90318 90279 90312 90328 90321 90322 90388 90303
6 CAVITY 90308 90315 90306 90317 90294 90380 90326 90295 90327 90319 90692
LUBE&SIZE 90039 90039 90044 90048 90048 90048 90048 90048 90048 90048 90048 90048 90048
BL BULLET
SIZER 91513 91513 91514 91520 91520 91520 91520 91520 91520 91520 91520 91520 91520

9mm 44 SPEC • 44 MAG • 44/40

9MM LUGER • 38 SUPER AUTO • 380 AUTO MAKAROV 40 S&W • 10 MM AUTO 41 MAGNUM

3B BALLISTIC
COEFFICIENT
.107 .105 .123 .164 .127 .166 .093 .117 .141 .141 .110 .119 .111 .124
MOLD TL356-95-RF 356-102-1R 356-120-TC TL356-124-2R TL356-124-TC 356-125-2R 365-95-1R 401-145-SWC TL401-175-WC 401-175-TC 410-195-SWC TL410-210-SWC 429-214-SWC C429-240-SWC
DOUBLE 90601 90305 90239 90464 90238 90309 90466 90470 90431 90256 90330 90335 90336 90338
6 CAVITY 90672 90387 90465 90402 90457 90433 90690 90483
LUBE&SIZE 90046 90046 90046 90046 90046 90046 custom 90060 90060 90060 90052 90052 90054 90054
BL BULLET
SIZER 91518 91518 91518 91518 91518 91518 custom 91521 91521 91521 91522 91522 91524 91524

44 SPECIAL • 44 MAGNUM • 44/40 45 ACP • 45 AUTO RIM • 45 COLT

47
185-1R
371

039 BALLISTIC .124 .196 .169 .218 .090 .127 .140 .127 .145 .189 .146 .146
COEFFICIENT
513 MOLD 429-200-RF 429-240-2R TL430-240-SWC C430-310-RF 452-160-RF 452-200-SWC 452-200-RF TL452-200-SWC 452-228-1R TL452-230-2R TL452-230-TC 452-230-TC
DOUBLE 90285 90341 90299 90858 90570 90348 90234 90463 90351 90346 90287 90290
6 CAVITY 90428 90339 90357 90227 90310 90697 90379 90352 90350 90286 90289
LUBE&SIZE 90054 90054 90062 90062 90055 90055 90055 90055 90055 90055 90055 90055
BL BULLET
SIZER 91524 91524 91525 91525 91527 91527 91527 91527 91527 91527 91527 91527

45 ACP | 45 AUTO RIM 45 COLT

45 COLT 454 CASULL 475 LINEBAUGH 500 S&W
CUSTOM MOLDS We can produce custom bullet molds within
certain limits. The prices are the same as our standard molds, but there
is a tooling and set-up charge. If interested in this service, please access
design assistance sheet on www.leeprecision.com. This outlines the basic
limitations of our manufacturing process.

https://leeprecision.com/files/instruct/
83 MoldDesignAssistance.pdf
00-F
66 BALLISTIC .136 .210 .233 .271 .296
COEFFICIENT
MOLD 452-252-SWC 452-255-RF C452-300-RF 476-400-RF C501-440-RF WARNING Melting lead and casting lead objects will expose
DOUBLE 90356 90358 90359 90241 90991 you and others in the area to lead, which is known to the State
of California to cause reproductive harm and cancer. For more
om 6 CAVITY 90349 90228
information, www.P65Warnings.ca.gov.
LUBE&SIZE 90055 90055 90055 custom 90191 See instructions on REDUCING EXPOSURE supplied with product.
om
BL BULLET custom 91530
SIZER 91527 91527 91527
www.leeprecision.com 37

2022_Catalog_1227_.indd 37 12/30/21 3:52 PM

 BLACK POWDER BULLET MOLDS LEE PRECISION, INC.

Cast Minie Bullets

as fast as Round Balls
Improved Minie, Traditional Design
45 Cal. .450-294M 90467
45 Cal. oversize .454-298M 90469
50 Cal. .500-360M 90472
54 Cal. .533-410M 90473
54 Cal. oversize .540-415M 90474
58 cal. .575-472M 90476
Minie Bullet Mold 58 cal. oversize .578-478M 90478
Automatic Core Pin Mold. Open mold upside down to empty. Close it and you’re Improved design is easier to cast and load.
ready to cast the next. The core pin automatically centers in the mold. Easily Usually more accurate; a wider variety of sizes.
cast 200 per hour. A quality mold built to last as long as your rifle.
COMPLETE w/ HANDLES and AUTOMATIC CORE PIN 50.98 Modern Minie, Target Design
50 Cal. .500-354M 90471
Round Ball Molds The most accurate of all Minies. Makes nice, clean
Have tangential cut off which eliminates the holes in the target. The first choice for highest scores.
objectional nib at the sprue.
DOUBLE CAVITY WITH HANDLES 39.98
6–CAVITY WITHout HANDLES 64.00
SIZE DOUBLE SIZE DOUBLE SIZE DOUBLE Original Style Minie Bullet
.311 90406 .440 90436 .535 90456 58 Caliber 575-500M 90481
.319 90410 .445 90438 .562 90460
An extremely popular, traditional size Minie bullet.
.350 90415 .451 90440 .575 90461
.600 90975
Available in 58 caliber only. Certainly a must for
.360 90418 .454 90442
.375 90420 .457 90444 SIZE SINGLE authentic muzzle loading shooting.
.380 90423 .490 90448 .690 90978*
*Due to the diameter, mold
.390 90424 .495 90450 ships as a single cavity.

.395 90425 .500 90452 SIZE 6 CAVITY

.433 90432 .530 90283 .490 91711 ▲ ▲ Handles #90005 26.98

R · E · A · L BULLE T for MUZZLE LOADERS

R I F L I N G · E N G R AV E D · AT · LOA D I N G Grains Double
45 Cal. 200 90390
A solid bullet that loads easily even after many firings because of its unique 45 Cal. 250 90392
cleaning action. Will not tumble. A perfect hunting bullet with heavy 50 Cal. 250 90394
50 Cal. 320 90396
loads. Easy to cast. Shoots accurately even in greatly oversize barrels.
54 Cal. 300 90398
DOUBLE CAVITY WITH HANDLES 39.98 54 Cal. 380 90400
58 Cal. 440 90404

RIFLING·ENGRAVED·AT·LOADING charges, the R·E·A·L bullet also retains

The driving bands are large enough accuracy with maximum loads. Each
to adequately engage the rifling when band is generously tapered to the
pushed into the muzzle, and thin rear with an angle close to that of a
enough to easily engrave. They’re lathe center, so as to center the bullet
strong enough to withstand maximum against the rifle bands. When pushed
charges without stripping or gas in, the bullet automatically centers in Conical Bullet Mold
cutting. the bore. FOR BLACK POWDER
UNIQUE CLEANING ACTION You can MORE ACCURATE The bevel base REVOLVERS
shoot all day without cleaning your of the R·E·A·L bullet contributes to A super accurate bullet that is easy to
rifle between shots! When inserted greater accuracy. When the bullet
load straight and true. Two lube grooves
into the muzzle, tiny scraping edges exits the bore, the gas escapes
are swagged forward on each driving equally around the perimeter of the prevent flash ignition and lead fouling.
Combo Molds band. These perfect fitting scrapers base. The uniform bevel is resistant More energy and far greater accuracy
remove the fouling from the previous to nicks that would permit gas than round balls. 39.98
45 CAL 200RB with Handles shot. to escape prematurely and DOUBLE
90405 39.98 cause a jet effect on one
Double cavity mold casts one 45 Cal. 200 R·E·A·L EASIER, FASTER TO LOAD It’s side of the bullet.
bullet and one .440 diameter Round Ball. easy to load straight and true, easier 36 Cal. 375-130-1R 90378
and faster than a round ball with 44 Cal. Rem. 450-200-1R 90382
50 CAL 320RB with Handles patch. Easily stabilized with very light
44 Ruger Old Army 456-220-1R 90384
90488 39.98 WARNING Melting lead and casting lead objects will expose you and
Double cavity mold casts one 50 Cal. 320 R·E·A·L bullet
and one .490 diameter Round Ball. others in the area to lead, which is known to the State of California to cause
reproductive harm and cancer. For more information, www.P65Warnings.ca.gov.
See instructions on REDUCING EXPOSURE supplied with product.
38

2022_Catalog_1227_.indd 38 12/30/21 3:52 PM

ON, INC.
ReLOADING22 SLUG & BUCKSHOT MOLDS | LOAD-ALL II

LOAD SLUGS 18 CAVITY

FOR LESS THAN BUCKSHOT
STANDARD BULLET
TRAPLOADS MOLDS
Lee Slug Mold
Load slugs for less than standard trap loads. The
Lee DRIVE KEY slug is loaded in standard trap
hull with standard wad and conventional folded
crimp. Slug loads are produced with any standard
shot shell reloading press.
Lee Slug Mold features the exclusive drive key. The drive key positively rotates
the slug in rifled shotgun barrels and doubles as a support rib allowing use of a
standard trap wad—no need for a support wad or base filler. Sabot wad design
outperforms rifled slugs in rifled slug barrels. Velocity and accuracy meet and
exceed expensive factory loaded rifled slugs. Molds feature self centering
Lee 18 Cavity Buckshot Bullet Molds
automatic core pins for maximum speed and convenience. Mold is complete
with sprue plate, handles and complete instructions with suggested loads. Precision-machined molds produce 18 linked pellets per cast.
Shotgun Slug Mold 1 oz. 12 ga. 90281 50.98 Each cast produces enough pellets to load two 12 Gauge shotshells.
Shotgun Slug Mold 7/8 oz. 12 ga. 90282 50.98 Easily cast 3,000 pellets per hour. Handles shown not included. Order
product No. 90005 on page 36.
EXCLUSIVE DRIVE KEY POSITIVELY ROTATES
THE SLUG IN RIFLED BARRELS AND
Ball diameter .240 #4 BUCKSHOT 90028 75.00
Ball diameter .330 00 buckshot 90486
ELIMINATES THE NEED Ball diameter .360 000 Buckshot 90192
FOR SUPPORT WADS OR BASE FILLERS;
ASSURES POSITIVE AND SMOOTH HANDLES 90005 26.98
DISCARD OF THE SABOT WAD.

GUARANTEED MORE ACCURATE WARNING Melting lead and casting lead objects will expose you and
others in the area to lead, which is known to the State of California to cause
than factory slugs or your money back reproductive harm and cancer. For more information, www.P65Warnings.ca.gov.
See instructions on REDUCING EXPOSURE supplied with product.

LOAD
SHOTGUN SHELLS,
STEEL OR LEAD SHOT, Load-All Options
TO LOOK AND SHOOT Conversion To Another Gauge
LIKE NEW The Load-All II can be easily and
economically converted to another
gauge with the conversion kit. The
entire die carrier is replaced so no
Lee Load-All II ad­just­ments are needed. The con­
Lee Load-All II shotgun shells not only look better ver­sion kit includes the die carrier,
than those loaded on machines costing hundreds of steel sizer, wad guide, shell holder,
dollars, but they usually have more uniform velocity load data and instructions.
and patterns. You can load just as fast as with any CONVERSION KIT 28.98
other brand of loader costing up to $200. 12 GAUGE 90070
16 GAUGE 90071
Twenty-four shot and powder bushings are includ- 20 GAUGE 90072
ed free. The bushings alone can cost several dollars
each from other man­ufacturers— and they’re not as
accurate as those made by Lee. Only Lee supplies
molded bushings.
This is a time proven tool. There are hundreds of Lee Adjustable Shot Dipper
thousands in use world wide: in nearly forty years, Accurately measure lead, bismuth
we have yet to see one worn out. Written two-year and steel. Telescoping cup
uncond­itional guarantee and a lifetime warranty. adjustable from 7/8 to 17/8 oz.
Calibrated for lead shot. Works
Lee Load-All II 87.98 perfect for large pellet sizes.
12 GAUGE 90011 With steel, simply count out the
16 GAUGE 90015 pellets or weigh and set dipper
20 GAUGE 90012 accordingly.
90973 3.98

www.leeprecision.com 39

2022_Catalog_1227_.indd 39 12/30/21 3:52 PM

 LEE PRECISION, INC.

THANK YOU FOR CHOOSING LEE PRECISION PRODUCTS

OUR PRODUCTION FACILITIES IN HARTFORD, WISCONSINN

Thank you for choosing FROM THE CORNER of a one-car garage to nearly two acres under roof — for more
LEE PRECISION than 63 years, the LEE family still continues to provide the best value in American made

PRODUCTS reloading equipment. Our family looks forward to another lifetime of supplying the best,
most economical reloading equipment in the business. • JOHN LEE | PRESIDENT

Lee Guarantee
The Lee
Lee Reloading Products are guaranteed not to wear out or break
from normal use for two full years or they will be repaired or
replaced at no charge, if returned to the factory. Any Lee product
of current man­ufacture, regard­less of age or con­di­tion, will be
reconditioned to new, in­clud­ing new guarantee, if returned to the
factory with payment equal to half the current retail price )
AUTO BENCH PRIME | AUTO BREECH LOCK PRO | AUTO-DRUM | BREECH LOCK | CLASSIC CAST
LOAD-MASTER | LEVER PRIME SYSTEM | LEE LOADER | LOAD-ALL II | RGB
FACTORY CRIMP | PACESETTER | PERFECT POWDER MEASURE | SAFETY SCALE | AUTO-PRIME
BULGE BUSTER | MICRO-BAND DRIVE KEY | R·E·A·L | ARE TRADEMARKS OF LEE PRECISION, INC.
LEE PRECISION, INC.
www.leeprecision.com

P RI NT E D IN T H E USA | 1 23 1 2 1

40

2022_Catalog_1227_.indd 40 12/30/21 3:52 PM