EXECUTIVE TABLE with Fixed Drawer
Brand: AKHTAR
Model: AFL-OTE-103 & CXD-102
Size: 1200 x 700 x 750
Color: Beech & Black
Made By: MFC Board
Executive Table with Fixed Drawer Unit made of imported best quality scratch proof and
termite proof melamine faced chip board with PVC stopper & edging by automatic edge
bending machine. Board Thickness: Top 25mm and other panels are 16mm. Board
density is of 650-700 kg/m3. One Drawer unit consist of 3 drawers with
high quality imported central lock and round shaped PVC handle to be
fix with Table top and side panel in right side. Table top to be fixe in
between the side panels and one horizontal front panel fixed in
between the side panels. Fully knock down system by using Housing,
Dowel, T-nut, JRN nut, Wood Pin etc. Identification mark: Hologram
and Monogram Sticker of manufacturer. Packing: Standard for
transportation
Standard: ISO9001:2015
Identification mark: Hologram and Monogram Sticker of manufacturer.
Packing: Carton & Poly Pack.
Warranty: One Year
Conference Chair
Brand: AKHTAR
Model: AFL-CRS-119
Color: Black Rexine
Made By: Nylon Chair Base
Using mature high density imported Nylon Back shell which ensure termite & crack proof &
heavy load bearing capacity. Smooth and gorgeous color state of excellent looking finishing.
Gas lift height adjustable mechanism revolving and chair constructed with tubular tube. Seats
and back rests with a full range of ergonomic controls provide comfort and support during
prolonged periods of seated task work. Imported best quality PVC chair wheel with Nylon
chair base. Seat top part use premium quality foam which bearing density 31
kg/m³.Standard chair measurement bearing Seat 450 mm & 480mm seat high min 400 mm
to max 500mm & back high min 740mm to max 800 mm with Gas lift up-down tolerance
Standard: ISO9001:2015
Identification mark: Hologram and Monogram Sticker of manufacturer.
Brand: AKHTAR
Model: AFL-ISR-102 (Steel Rack)
Size: 1200 x 600 x 1800
Color: Black & Black
Heavy duty Height adjustable slotted angle Rack made of 2.00 mm thick MS angle & 0.7mm
thick Cold Rolled Mild Steel. All surface of Mild Steel are chemically de-rusted
and zinc phosphate coated with oven backed powder paint finish. Four nos.
perforated MS angles are of 2.00mm thick and 5 No’s height adjustable
shelves are made of0.7mm thick cold rolled mild steel with 25mm band
around the shelf and stiffener in bottom. Load bearing capacity of each
shelves are 300kg. Shelves to be fixe with 4no’s perforated MS angle by MS
joint plate. Fully knock down system.
Standard: ISO9001:2015
Identification mark: Hologram and Monogram Sticker of manufacturer.
Packing: Carton & Poly Pack.
Warranty: One Yea
3 Drawer Steel File Cabinet
Size: 480 x 610 x 1070
Model: AFL-OCF-301
Brand: Akhtar
Color: Light Gray
Material: Made of high quality Steel-sheet # thickness: 0.8 mm,
other sides of 0.7 mm cold-rolled steel reinforced with4 drawer
locking system; all steel parts are to be chemically de-rusted zinc
phosphate coated, oven-backed paint finish with central locking
arrangement No. of Drawers: 3 (Three)
Standard: ISO9001:2015
Identification mark: Hologram and Monogram Sticker of
manufacturer.
Packing: Carton Pack.standard for transportation
Warranty: One Year
Modular Conference Table:
Model: AFl-OTC-206
Brand: Akhtar
Color: Beech & Beech
Dimension:
600X600X750mm (4 pcs)
625X625X750mm (2 pcs)
1200X600X750mm (4 pcs)
Modular Conference Table made of scratch proof and termite proof melamine laminated wood
particle board with 1 mm thick PVC edging and height adjustable stopper. Each Table’s side
panels are fixed on 2nos floor adjustable stopper. Able top 25 mm Top and other panel is 16mm
thick. One front panel to be fixed in between the side panels horizontally.
Each table contains a shelf for storing the documents and fixed under the
main top. Fully knock down system by using - Housing, Dowel, Wood pin,
JRN nut, PVC Cap etc.
Identification mark: Hologram and Monogram Sticker of manufacturer.
Packing: Standard packing for transportation.
Warranty: One Year
Executive Chair/Conference Chair:
Model: AFL-CRV-103;
Brand: Akhtar
Color: Black & Black
All surface of Mild Steel are mig welded, chemically de-rusted and zinc phosphate coated with oven
backed heated powder paint finish that confirms anti rust, shiny color and longevity. 32mm & 2mm
thickness round MS tube & 2mm thick MS plate structure with rubber stopper. Products are
manufactured by automatic tube bending machine. Well-constructed ergonomic design for long time
comfort siting fixed chair. Use of good quality Local Rexine with high density poly foam pasted by spray
able imported adhesive. Seat & Back top part use premium quality foam which bearing density 31 kg/m³
& Back part of back use supper quality foam which bearing density 22.5 kg-m³.Chair standard size
bearing seat high 440mm & back high 870mm.
Identification mark: Hologram and Monogram Sticker of
manufacturer.
Packing: Standard packing for transportation.
Warranty: One Year
