DRIPPERLINES, DRIPPERS

& OTHER EMITTERS

PRODUCT CATALOG

2017
Products appearing in this catalogue may be covered by one or more of the following US Patent Nos. 6027048, 6206305 and other U.S. patents
pending or corresponding issued or pending foreign patents

All rights are reserved. You are specifically prohibited and not allowed to reproduce, copy, duplicate, manufacture, supply, sell, hire, distribute or adapt
all or any part of this publication including any packaging. Netafim™, are trademarks of Netafim™ Ltd., registered in the U.S. and other countries.
We endeavor to provide accurate, quality and detailed information. However we cannot accept liability for your reliance on the provided information
and you are advised to independently seek professional advice from Netafim™ and/or its authorized representatives. There is no undertaking by us
that the provided information or any part thereof is accurate, complete or up to date .
Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation.
Netafim™ assumes no responsibility with regard to the performance or use of these products.
In no event shall Netafim™ be liable for any indirect, incidental, special or consequential damages.
CONTENTS
Technical terms 4
Introduction 5
UniRam™ AS 16009 - 16010 - 16012 - 17012 - 20010 - 20012 - 23010 6
UniRam™ CNL  16009 - 16010 - 16012 - 17012 - 20010 - 20012 - 23010 12
UniRam™ HCNL   16009 - 16010 - 16012 - 17012 - 20010 - 20012 - 23010 18
UniRam™ RC 16009 - 16010 - 16012 - 17012 - 20010 - 20012 - 23010 24
UniWine™ AS 16010 - 16012 - 17012 - 20010 - 20012 30
UniWine™ RC 16010 - 16012 - 20010 - 20012 36
UniRam™ AS XR 16010 - 16012 - 20010 - 20012 - 23010 38
UniGray™ CNL & HCNL 16009 - 16010 - 16012 - 17012 - 20010 - 20012 42
DripNet PC™ TWD & MWD 12125 - 12150 - 12200 - 12250 - 16125 - 16150 - 16200 - 16250
22135 - 22150 - 22250 - 25135 - 25150 - 25250 48
DripNet PC™ AS TWD & MWD 12125 - 12150 - 12200 - 12250 - 16125 - 16150 - 16200 - 16250
22135 - 22150 - 22250 - 25135 - 25150 - 25250 56
DripNet PC™ HWD 16009 - 16010 - 16012 - 20010 - 20012 - 23009 64
DripNet PC™ AS HWD 16009 - 16010 - 16012 - 20010 - 20012 - 23009 68
Aries™ HWD 12010 - 16009 - 16010 - 16012 - 20010 - 20012 - 23009 72
Aries™ MWD 16200 - 16250 - 16007 - 16008 - 22200 - 22250 - 25200 78
Aries™ TWD 16125 - 16150 - 22125 – 22135 -22150 84
Typhoon Plus™ 12125 - 12150 - 16080 - 16100 - 16125 - 16150 - 22080 - 22125
22135 - 22150 - 25125 - 25135 - 25150 88
Streamline Plus™ 16055 - 16060 - 16080 -16100 - 16125 - 22060 - 22080 - 22100 - 22125 - 22135 94
Microdrip 106
PC dripper PC, PC-LCNL, PC-HCNL 108
PCJ dripper PCJ, PCJ-LCNL, PCJ-HCNL 112
PCJ - HF On-line Bubblers 118
Button & Pot dripper 122
Arrow dripper 126
CapiNet™ 128
Spiders 130
Assembled dripperlines 136
Netafim™ blank dripperlines 138
UniTechline™ AS 140
Techline™ CV 144
Bioline™ AS 146
TechNet™ 150
TechNet™ AS 154
Landline™ 12 and 16 158
Landline™ 8 160
Techflow™ Junior 162
Leach Line A™ 164

3
TECHNICAL TERMS

International standards
Standard ISO 9261
The majority of drippers and dripperlines appearing in this catalog comply with the international standard ISO 9261.
This standard refers to and deals with these products and actually determines their quality. The absolute majority of the
Netafim™ irrigation products are in compliance withthe International Standards provisions and under the supervision
of the relevant institutions.

Standards 9001 and 14001

These standards deal with and focus on the organization/ operation/ adaptation of the manufacturing plant aimed at
meeting the international regulations stated in these documents. Netafim™ complies with and possesses the relevant
accredited certifications and as such meets those international standards.

Nominal flow rate

For a non-PC dripper:
Flow rate, expressed in liters per hour, of a dripper operating at the nominal test pressure:
1.0 bar, and at water temperature of 23ºC +/- 3°C.
For a pressure compensated dripper: Flow rate, expressed in liters per hour, of a dripper operating within the range of
regulation, and at water temperature of 23°C +/- 3°C.

Maximum working pressure

Highest water pressure recommended at the inlet to a dripper/ dripperline ensuring proper operation of the dripper/
dripperline.

Dripper exponent
The relation between the flow rate (Q) in liters per hour, and the inlet pressure (P) in meters column of water in a
dripper, is given by the formula:

Q (l/h) = K * P (meters) ^ X

Where:
K is a specific constant to each dripper
X is the dripper exponent

Note: for an exponent of 0, the emission rate does not vary with pressure, for an exponent of 1 the emission rate varies
linearly with pressure.

Pressure compensated dripper/dripperline

Dripper/ dripperline maintaining a constant flow rate at varying water pressures at the dripper/dripperline inlet within
the specified pressure limits.

Anti drain dripper/ dripperline

A dripper/ dripperline with “zero” flow whenever the dripper/ dripperline’s inlet pressure is lower than the value declared
by the manufacturer (other than zero).

Recommended filtration level

Filtration level recommendations included in this catalog refer to situations where the TTS (Total Suspended Solids)/
sand/ organic matter content are standard for water used for agricultural applications. Whenever abnormal levels of TTS
(Total Suspended Solids)/ sand/ organic matter are identified, it is recommended to consult the Netafim™ Technical
Department.

Flushing pressure
The maximum pressure permitted for application via the irrigation system during the flushing process. These pressure
rates are permitted for use provided the process does not exceed half hour of continuous flushing when the dripperlines
are continually flushed (at least some of the dripperlines on the same system must be open during flushing).
Note: Flushing process is done when dripperline ends kept open.

4
INTRODUCTION

Netafim™ dripperlines wall thicknesses definitions

HWD; Heavy walled dripperlines; equal or more than 0.9 mm wall thickness
MWD; Medium walled dripperlines; between 0.4 mm (included) and 0.89 (included) mm wall thickness
TWD; Thick walled dripperlines; equal or smaller than 0.39 mm wall thickness

The following catalog is an aid material to enable to find basic data on each of the drip products at hands reach.

In each section you will find:

1. Main applications of the item displayed.
2. Technical specifications
3. Features and benefits
4. Technical data of drippers and dripperlines
5. A table of all active catalog numbers
6. Basic packaging data

Use of the catalog number tables

The tables display main data. For further information apply to a Netafim™ representative.
A Netafim™ catalog number consists of the following elements:
a) 5 consecutive digits indicating the material group
b) 6 consecutive digits indicating a specific product within that material group.

To create a full catalog number, choose the relevant material group and add to it the 6 digits that define dripper flow
rate and spacing (these instructions apply to the integral products).
For example:

UNIRAM™ AS 16010
Catalog number 13720 - (any of below 6 digits)

FLOW DISTANCE BETWEEN DRIPPERS (M)

RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

1.0 000400 000450 000500 000550 000600 000700 000800 000900 001000 001200

1.6 001520 001550 001600 001650 001700 001800 001900 001950 002000 002100 002200 002500

2.3 002600 002700 002750 002850 002900 003000 003100 003200 003000 003600

3.5 003950 004000 004100 004160 004200 004270 004350 004370 004440 004470 004500

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)

Missing catalog numbers available upon request.

Product : Uniram™ AS 16010 , 1.6 l/h , 0.40 m = 13720-001700

*In the same table additional information can be found:
1) Equipment will arrive on bundled coils
2) Length of dripperline on the coil: 500 m

As specified above, these are the active catalog numbers in our ERP systems. Additional numbers can be activated/
opened as required in each of the empty cells in the table.

As for the other products (on-line drippers, arrow drippers, etc.) the tables similarly display the relevant material group
(first 5 digits) where the numbers in the tables (the other 6 digits) indicate the number of units supplied in each of the
different packing options.
This catalog contains all the metric based information, does not include all the USA used catalog numbers.

5
UNIRAM™ AS
INTEGRAL PRESSURE-COMPENSATING, CONTINUOUSLY
SELF-CLEANING, ANTI-SIPHON MECHANISM DRIPPER 16009 - 16010 - 16012 - 17012 - 20010 - 20012 - 23010

APPLICATIONS
■ Greenhouse, deciduous and tree irrigation.
■ Sub-surface multi seasonal row crops.
SPECIFICATIONS
■ Pressure-compensating range: 0.5-4.0 bar.
■ Anti-Siphon mechanism.
■ Largest filter in each dripper. Recommended filtration: according to drippers flow rate.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ Double TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled dripperlines (0.90, 1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ UniRam™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).
FEATURES AND BENEFITS
■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle,
ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging thus making UniRam™ highly resistant when
using low quality water.
■ Physical root barrier: Better protection against root intrusion without reliance on chemicals.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.

DRIPPERS TECHNICAL DATA

FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.7 0.5 – 4.0 0.70 x 0.65 x 40 110 0.7 0 130/120

1.0 0.5 – 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120
1.6 0.5 – 4.0 1.07 x 0.79 x 40 130 1.6 0 200/80
2.3 0.5 – 4.0 1.26 x 0.95 x 40 130 2.3 0 200/80
3.5 0.5 – 4.0 1.59 x 1.10 x 40 150 3.5 0 200/80
* Within working pressure range

6
UNIRAM™ AS 16009
Catalog number 13740 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 001190 001200 001250 001400 001550 001600

1.6 002300 002400 002500 002600 002650 002700 002750 002800

2.3 003400 003690 003700 003800 003850 003870 003900 004000 004100 004200

3.5 009700 009750 010035 010040 010050 010100 010150 010200

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16009 14.20 0.90 16.00 3.0 3.9 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16009 0.90 500 0.15 to 1.00 20.3 330 165000

*According to drippers spacing

UNIRAM™ AS 16010
Catalog number 13720 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000180 000200 000220 000240 000260 000280 000300

1.0 000380 000400 000450 000500 000550 000600 000700 000800 000840 000850 000900 001000 001200

1.6 001520 001550 001600 001650 001700 001800 001900 001950 001965 002000 002100 002200 002500

2.3 002600 002620 002700 002750 002850 002900 003000 003100 003150 003200 003300 003400 003600

3.5 003950 004000 004100 004160 004200 004270 004300 004350 004370 004440 004470 004500

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 22.1 330 165000

*According to drippers spacing

U n i Ra m ™ AS 7
UNIRAM™ AS 16012
Catalog number 13700 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000100 000120

1.0 000400 000450 000500 000600 000680 000700 000900

1.6 001000 001050 001087 001095 001100 001150 001200 001300 001400

2.3 001680 001700 001800 001900 002000 002050 002100 002200 002300 002350 002500

3.5 003200 003300 003400 003500 003550 003600 003700 004000

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 4.0 5.2 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16012 1.20 400 0.15 to 1.00 21.2 352 140800

*According to drippers spacing

UNIRAM™ AS 17012
Catalog number 14000 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000010 000020 000025

1.0 000050 000070 000085 000100 000125 000150 000190 000200 000210 000250

1.6 000600 000650 000700 000800 000830 000900 001000 001050 001110 001130 001135 001140

2.3 001200 001250 001400 001470 001550 001700 001900 001930 001950 002100 002130 002300

3.5 002380 002385 002390 002395 002399 002410 003000 003210 003600

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

17012 14.60 1.20 17.00 4.0 5.2 1.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

17012 1.20 400 0.15 to 1.00 22.4 352 140800

*According to drippers spacing

8 U ni Ram ™ AS
UNIRAM™ AS 20010
Catalog number 14520 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 001000 001025 001050 001100 001200 001300

1.6 001800 001900 001950 002050 002065 002070 002100 002200

2.3 002400 002500 002550 002600 002650 002700 002800 003000

3.5 003500 003600 003700 003800 003850 003890 004000 004100

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20010 1.00 300 0.15 to 1.00 17.4 330 99000

*According to drippers spacing

UNIRAM™ AS 20012
Catalog number 14500 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000008 000009 007500 007600 007700 007800 007900 008000

1.0 000020 000040 000050 000065 000075 000080 000095 000096 000100 000104 000108 000110

1.6 000170 000200 000300 000360 000400 000600 000700 000800 000900 000960 000970 000980

2.3 000990 001020 001150 001310 001450 001550 001800 001850 001920 001950 002100 002300 002400

3.5 005300 005400 005700 005800 005900 006000 006100 006200 006700

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 20.2 330 99000

*According to drippers spacing

U n i Ra m ™ AS 9
UNIRAM™ AS 23010
Catalog number 14635 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000500 000550 000600 000650 000700 000750

1.0 001300 001400 001500 001570 001600 001850

1.6 002200 002300 002400 002470 002520 002600 002660 002900

2.3 003500 003600 003705 003740 003800 003900 003950 004050 004100

3.5 005000 005100 005200 005400 005500 005700

Carton
coil length 200 200 200 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

23010 20.80 1.00 22.80 3.0 3.5 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

200 0.15 to 0.25 14.7 96000

23010 1.00 480
300 0.30 to 1.00 20.7 144000
*According to drippers spacing

10 U ni Ram ™ AS
UNIRAM™ CNL
INTEGRAL PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING, ANTI-SIPHON AND
ANTI-DRAIN MECHANISM DRIPPER 16009 - 16010 - 16012 - 17012 - 20010 - 20012 - 23010

APPLICATIONS
■ Greenhouse, deciduous and tree irrigation.
■ Sub-surface multi seasonal row crops.
■ Precise irrigation
SPECIFICATIONS
■ Pressure-compensating range: 1.0-4.0 bar.
■ Anti-Siphon and Anti-Drain mechanism.
■ Largest filter in each dripper. Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ Double TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled dripperlines (0.90, 1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ UniRam™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).
FEATURES AND BENEFITS
■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100 % uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ Anti-drain (CNL) system: Eliminates drainage and refill effect, and improves efficiency in pulse irrigation.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of
a cycle, ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging thus making UniRam™ highly resistant
when using low quality water.
■ Physical root barrier: Better protection against root intrusion without reliance on chemicals.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED SHUT OFF PRESSURE
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH) (BAR)
0.7 1.0 – 4.0 0.70 x 0.65 x 40 110 0.7 0 130/120 0.14
1.0 1.0 – 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120 0.14
1.6 1.0 – 4.0 1.07 x 0.79 x 40 130 1.6 0 130/120 0.14
2.3 1.0 – 4.0 1.26 x 0.95 x 40 130 2.3 0 130/120 0.14
3.5 1.0 – 4.0 1.59 x 1.10 x 40 150 3.5 0 130/120 0.14
* Within working pressure range

12
UNIRAM™ CNL 16009
Catalog number 13920 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000700

1.0 001150 001200 001300 001400 001500 001700

1.6 002100 002200 002300 002500 002600 002800

2.3 003400 003580 003600 003900

3.5 005000 005050

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16009 14.20 0.90 16.00 3.0 3.9 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16009 0.90 500 0.15 to 1.00 20.3 330 165000

*According to drippers spacing

UNIRAM™ CNL 16010

Catalog number 13900 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000250

1.0 001000 001100 001150 001200 001230 001260 001300 001325 001350 001400 001800 002000

1.6 004400 004500 004550 004600 004630 004700 004800 004900 004950 004960 005000 005200 005300

2.3 005600 005700 005900 006000 006050 006200 006400 006500 006550 006670 006700 006800 006900 007000

3.5 007300 007350 007400 007500 007530 007600 007700 007900 008100 008200 008300 008400 008500

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 22.1 330 165000

*According to drippers spacing

U n i Ra m ™ C N L 13
UNIRAM™ CNL 16012
Catalog number 13880 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000050 000100 000400

1.0 001100 001150 001200 001300 001400 001500 002000

1.6 002800 002900 003000 003100 003150 003200 003300 003700 003800 004200

2.3 004700 004900 005000 005150 005300 005400 005700 005850

3.5 006500 006510 006400 006700 007000

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 4.0 5.2 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16012 1.20 400 0.15 to 1.00 21.2 352 140800

*According to drippers spacing

UNIRAM™ CNL 17012

Catalog number 14040 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000005

1.0 000035 000040 000045 000050 000070 000100 000120 000140 000160 000200

1.6 000300 000350 000400 000450 000467 000500 000550 000600 000750 000770 000800

2.3 000950 000970 001100 001150 001400 001600 001700 001730 001800 001900 002100 002200 002300

3.5 002950 003000 003020 003100 003200 003250 003300 003320 003350 003370 003400

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

17012 14.60 1.20 17.00 4.0 5.2 1.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

17012 1.20 400 0.15 to 1.00 22.4 352 140800

*According to drippers spacing

14 U ni Ram™ C N L
UNIRAM™ CNL 20010
Catalog number 14560 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 000900 000950 001000 001200 001300 001400 001500 001550 002000

1.6 004200 004300 004400 004500 004600 004700 004800 004900 005000 005200

2.3 005500 005600 005700 005800 005900 006000 006100 006300 006500

3.5 006950 007000 007200 007300 007400 007500 007550 007600

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20010 1.00 300 0.15 to 1.00 17.4 330 99000

*According to drippers spacing

UNIRAM™ CNL 20012

Catalog number 14540 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 007000 000030

1.0 000070 000100 000120 000140 000153 000160 000170 000180 000185 000190 000200

1.6 000400 000450 000500 000523 000550 000600 000650 000665 000680 000750 000780 000800

2.3 000890 000900 001050 001400 001510 001900 002100 002300 002500 002600 002700 002800 002900

3.5 003880 003900 004000 005450 004100 004200 004300 004350 004400 004500 004600 004700 004800

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 20.2 330 99000

*According to drippers spacing

U n i Ra m ™ C N L 15
UNIRAM™ CNL 23010
Catalog number 14625 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000800

1.0 001600 001700 001900 001950

1.6 002800 002900 003000 003100

2.3 003850 003900 004100 004200

3.5 005400 005450 005500 005600 005700 005800 006100

Carton
coil length 200 200 200 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

23010 20.80 1.00 22.80 3.0 3.5 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

200 0.15 to 0.25 14.7 96000

23010 1.00 480
300 0.30 to 1.00 20.7 144000
*According to drippers spacing

16 U ni Ram™ C N L
UNIRAM™ HCNL  
INTEGRAL PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING, ANTI-SIPHON AND
HIGH ANTI-DRAIN MECHANISM DRIPPER 16009 - 16010 - 16012 - 17012 - 20010 - 20012 - 23010

APPLICATIONS
■ Greenhouse, deciduous and tree irrigation.
■ Precise irrigation
SPECIFICATIONS
■ Pressure-compensating range: 1.5-4.0 bar.
■ Anti-Siphon and higher pressure range of the Anti-drain mechanism.
■ Largest filter in each dripper. Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ Double TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled dripperlines (0.90, 1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ UniRam™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).
FEATURES AND BENEFITS
■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100 % uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ High Anti-drain (HCNL) system: Eliminates drainage and refill effect, and improves efficiency in pulse irrigation.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of
a cycle, ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging thus making UniRam™ highly resistant
when using low quality water.
■ Physical root barrier: Better protection against root intrusion without reliance on chemicals.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.

DRIPPERS TECHNICAL DATA

FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED SHUT OFF PRESSURE
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH) (BAR)
0.85 1.5 – 4.0 0.70 x 0.65 x 40 110 0.85 0 130/120 0.25
1.25 1.5 – 4.0 0.83 x 0.74 x 40 130 1.25 0 130/120 0.25
2.00 1.5 – 4.0 1.07 x 0.79 x 40 130 2.00 0 130/120 0.25
2.90 1.5 – 4.0 1.26 x 0.95 x 40 130 2.90 0 130/120 0.25
4.40 1.5 – 4.0 1.59 x 1.10 x 40 150 4.40 0 130/120 0.25
* Within working pressure range

18
UNIRAM™ HCNL 16009
Catalog number 13925 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85 002045 002200 002210

1.25 003880 003900 004000

2.00 005400 005470

2.90

4.40

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16009 14.20 0.90 16.00 3.0 3.9 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16009 0.90 500 0.15 to 1.00 20.3 330 165000

*According to drippers spacing

UNIRAM™ HCNL 16010

Catalog number 13910 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85 000800 000810 000900 001060 001080

1.25 002000 002100 002400 002500 002600 002700

2.00 003150 003230 003300 003400 003500 003600 003700 004000

2.90 004500

4.40 006660 006680 006600

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 22.1 330 165000

*According to drippers spacing

U n i Ra m ™ H C N L 19
UNIRAM™ HCNL 16012
Catalog number 13870 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85

1.25 004000

2.00 005290 005300 005400

2.90

4.40

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 4.0 5.2 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16012 1.20 400 0.15 to 1.00 21.2 352 140800

*According to drippers spacing

UNIRAM™ HCNL 17012

Catalog number 14050 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85

1.25 002000 002060 002400

2.00 003200 003300 003320 003600

2.90

4.40 005000

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

17012 14.60 1.20 17.00 4.0 5.2 1.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

17012 1.20 400 0.15 to 1.00 22.4 352 140800

*According to drippers spacing

20 U ni Ram™ H C N L
UNIRAM™ HCNL 20010
Catalog number 14565 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85 000640 000650

1.25 001290 001300 001500

2.00 002300 002400

2.90 003500

4.40 004500

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20010 1.00 300 0.15 to 1.00 17.4 330 99000

*According to drippers spacing

UNIRAM™ HCNL 20012

Catalog number 14550 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85 000100 000110

1.25 000980 001000 001090 001100 001200 001300 001500 001650 001750 001800

2.00 001900 002000 002300 002400 002500 002800 002850 002900 002950

2.90 003100 003150 003200 003250 003265 003300 003350 003400

4.40 004000 004100 004200 004300 004600 004700 004800 005000

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 20.2 330 99000

*According to drippers spacing

U n i Ra m ™ H C N L 21
UNIRAM™ HCNL 23010
Catalog number 14645 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85

1.25 001500

2.00 002500 002600 003000

2.90 004100

4.40 006200

Carton
coil length 200 200 200 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

23010 20.80 1.00 22.80 3.0 3.5 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

200 0.15 to 0.25 14.7 96000

23010 1.00 480
300 0.30 to 1.00 20.7 144000
*According to drippers spacing

22 U ni Ram™ H C N L
UNIRAM™ RC
INTEGRAL PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING DRIPPER    16009 - 16010 - 16012 - 17012 - 20010 - 20012 - 23010

APPLICATIONS
■ Deciduous and tree irrigation.
■ On-surface multi seasonal Row Crops.

SPECIFICATIONS
■ Pressure-compensating range: 0.5-4.0 bar.
■ Largest filter in each dripper. Recommended filtration: according to drippers flow rate.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ Double TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled dripperlines (0.90, 1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ UniRam™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle,
ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging thus making UniRam™ highly resistant when
using low quality water.
■ Physical root barrier: Better protection against root intrusion without reliance on chemicals.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.

DRIPPERS TECHNICAL DATA

FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.7 0.5 - 4.0 0.70 x 0.65 x 40 110 0.7 0 130/120

1.0 0.5 - 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120
1.6 0.5 - 4.0 1.07 x 0.79 x 40 130 1.6 0 200/80
2.3 0.5 - 4.0 1.26 x 0.95 x 40 130 2.3 0 200/80
3.5 0.5 - 4.0 1.59 x 1.10 x 40 150 3.5 0 200/80

* Within working pressure range

24
UNIRAM™ RC 16009
Catalog number 13750 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 001400 001600

1.0 002200 002300 002400 002500 002550 002600 002700 002900

1.6 003200 003300 003400 003500 003560 003600 003700 003750 003900

2.3 004900 005100 005200 005300 005400 005500 005700 005810 005830 005900 006000

3.5 007000 007100 007200 007300 007350 007400 007500 007650 007700

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16009 14.20 0.90 16.00 3.0 3.9 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16009 0.90 500 0.15 to 1.00 20.3 330 165000

*According to drippers spacing

UNIRAM™ RC 16010
Catalog number 13730 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 001000 001500 002000 002200 002400 002500 002600

1.0 003700 003800 003900 004000 004100 004200 004400 004500 004600 004700 005000

1.6 006850 006900 006950 007000 007020 007200 007400 007520 007530 007550 007600 007700 007800 008000

2.3 009800 009900 010000 010100 010200 010400 010500 010520 010550 010600 010700 010800 011000

3.5 012900 013000 013100 013200 013400 013500 013520 013550 013600 013700 013900 014000

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 22.1 330 165000

*According to drippers spacing

U n i Ra m ™ RC 25
UNIRAM™ RC 16012
Catalog number 13890 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 001300 001400 001450

1.6 001900 002000 002050 002550

2.3 003004 003020 003050 003100 003200 003250 003300 003400 003700

3.5 004550 004580 004600 004700 005000

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 4.0 5.2 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16012 1.20 400 0.15 to 1.00 21.2 352 140800

*According to drippers spacing

UNIRAM™ RC 17012
Catalog number 14180 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000100 000150 000200 000250 000550 000650 000700 000730 001000

1.0 001620 001700 001800 001900 001980 002040 002200 002250 002270 002300

1.6 002500 002470 002600 002810 002920 003100 003123 003124 003130 003200 003320 003400

2.3 003860 003920 004000 004025 004050 004150 004170 004185 004190 004200 004220 004240 004260

3.5 004720 004800 004900 005000 005100 005300 005400 006000

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

17012 14.60 1.20 17.00 4.0 5.2 1.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

17012 1.20 400 0.15 to 1.00 22.4 352 140800

*According to drippers spacing

26 U ni Ram ™ RC
UNIRAM™ RC 20010
Catalog number 14570 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000010 000030 000040 000050 000060 000070

1.0 000300 000400 000450 000500 000550 000600 000650 000700 000750

1.6 001040 001050 001120 001200 001270 001300 001390 001400 001500 001600 001700

2.3 001950 002200 002300 002400 002500 002600 002650 002700 002800 002850 002900

3.5 003175 003200 003250 003300 003400 003500 003550 003700 003800 003900 004200

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20010 1.00 300 0.15 to 1.00 17.4 330 99000

*According to drippers spacing

UNIRAM™ RC 20012
Catalog number 14420 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 000400 000450 000570 000650 000800 000850

1.0 001300 001500 001600 001770 001870 001920 002080 002400 002500 002600

1.6 002800 002940 003000 003080 003300 003405 003440 003500 003700

2.3 004300 004400 004500 004650 004800 004870 004883 004900 004950 005200

3.5 005550 005600 005650 005700 005800 005850 005950 006000 006100 006200

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 20.2 330 99000

*According to drippers spacing

U n i Ra m ™ RC 27
UNIRAM™ RC 23010
Catalog number 14655 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7 001100

1.0 002300 002400

1.6 003300 003500 003550

2.3 004500 004520

3.5

Carton
coil length 200 200 200 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

23010 20.80 1.00 22.80 3.0 3.5 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

200 0.15 to 0.25 14.7 96000

23010 1.00 480
300 0.30 to 1.00 20.7 144000
*According to drippers spacing

28 U ni Ram ™ RC
UNIWINE™ AS
INTEGRAL PRESSURE-COMPENSATING, CONTINUOUSLY
SELF-CLEANING, ANTI-SIPHON MECHANISM DRIPPER 16010 - 16012 - 17012 - 20010 - 20012

APPLICATIONS
Vineyards sub-surface multi seasonal installations.

SPECIFICATIONS
■ Pressure-compensating range: 0.5-4.0 bar.
■ Anti-Siphon mechanism.
■ Largest filter in each dripper. Recommended filtration: according to drippers flow rate.
■ Filtration method id to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/silt/clay exceed 100 ppm , pre treatment well be applied according to Netafim™ expert team’s instructions.
■ Double TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled pipes (1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ UniWine™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100 % uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle,
ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging thus making UniWine™ highly resistant
when using low quality water.
■ Physical root barrier: Better protection against root intrusion without reliance on chemicals.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ 2 purple strips to easily identification.
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.7 0.5 - 4.0 0.70 x 0.65 x 40 110 0.7 0 130/120

1.0 0.5 - 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120
1.6 0.5 - 4.0 1.07 x 0.79 x 40 130 1.6 0 200/80
2.3 0.5 - 4.0 1.26 x 0.95 x 40 130 2.3 0 200/80
3.5 0.5 - 4.0 1.59 x 1.10 x 40 150 3.5 0 200/80
* Within working pressure range

30
UNIWINE™ AS 16010
Catalog number 14740 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 001140 001420

1.6 001830 001850 002220

2.3 002820 003350

3.5

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 22.1 330 165000

*According to drippers spacing

UNIWINE™ AS 16010 - WITH ASSEMBLY CLIP

Catalog number : 14740 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 001050 001100 001150 001200 001250 001300 001400

1.6 001590 001640 001800 001870 001900 002000 002100 002200

2.3 002500 002600 002700 002800 002850 002900 003000 003100 003300

3.5 004000 004200 004400 004600 004900

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 300 0.15 to 1.00 14.4 330 99000

*According to drippers spacing

U n i W i n e ™ AS 31
UNIWINE™ AS 16012 - WITH ASSEMBLY CLIP
Catalog number : 14715 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6 001500

2.3 003200 003500 003800 003900 003950 004000 004100

3.5

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.6 4.0 5.2 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16012 1.20 300 0.15 to 1.00 17.2 330 99000

*According to drippers spacing

UNIWINE™ AS 17012 - WITH ASSEMBLY CLIP

Catalog number : 14820 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6 001500 001600

2.3 003000 003050 003100 003500 003900

3.5

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

17012 14.60 1.20 17.00 4.0 5.2 1.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

17012 1.20 300 0.15 to 1.00 17.7 330 132000

*According to drippers spacing

32 U ni W i ne™ AS
UNIWINE™ AS 20010
Catalog number 14995 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6

2.3 003010

3.5 005010

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20010 1.00 300 0.15 to 1.00 17.4 330 99000

*According to drippers spacing

UNIWINE™ AS 20010 - WITH ASSEMBLY CLIP

Catalog number 14995 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6 001900 002000 002100 002400

2.3 002900 002850 003000 003500 003700 003800

3.5 005000

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20010 1.00 300 0.15 to 1.00 17.5 330 99000

*According to drippers spacing

U n i W i n e ™ AS 33
UNIWINE™ AS 20012
Catalog number 14980 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 002020

1.6 002920

2.3 003505 004010

3.5

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 20.2 330 99000

*According to drippers spacing

UNIWINE™ AS 20012 - WITH ASSEMBLY CLIP

Catalog number 14980 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 001400 001500 001600 001700 001800 001950 002000

1.6 002200 002300 002400 002450 002550 002800 002900

2.3 003200 003250 003480 003580 003600 003900 003990

3.5 005700 005800 005900 006000 006200 006400 006500

Bundled
coil length 200 200 200 200 200 200 200 200 200 200 200 200 200 200
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 200 0.15 to 1.00 21.0 330 66000

*According to drippers spacing

34 U ni W i ne™ AS
35
UNIWINE™ RC
INTEGRAL PRESSURE-COMPENSATING, CONTINUOUSLY
SELF-CLEANING DRIPPER 16010 - 16012 - 20010 - 20012

APPLICATIONS
Vineyards on-surface or attached to the trellising multi seasonal installations.

SPECIFICATIONS
■ Pressure-compensating range: 0.5-4.0 bar.
■ Largest filter in each dripper. Recommended filtration: according to drippers flow rate.
■ Filtration method id to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/silt/clay exceed 100 ppm, pre treatment well be applied according to Netafim™ expert team’s instructions.
■ Double TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled pipes (1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ UniWine™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100 % uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the
beginning or end of a cycle, ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging thus making
UniWine™ highly resistant when using low quality water.
■ Physical root barrier: Better protection against root intrusion without reliance on chemicals.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves
clogging resistance. Widest water passages within the dripper.
■ 2 purple strips to easily identification.
■ Optional pre-assembled wine clip for easier trellising.
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.7 0.5 - 4.0 0.70 x 0.65 x 40 110 0.7 0 130/120

1.0 0.5 - 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120
1.6 0.5 - 4.0 1.07 x 0.79 x 40 130 1.6 0 200/80
2.3 0.5 - 4.0 1.26 x 0.95 x 40 130 2.3 0 200/80
3.5 0.5 - 4.0 1.59 x 1.10 x 40 150 3.5 0 200/80

* Within working pressure range

36
UNIWINE™ RC 16010 - WITH ASSEMBLY CLIP
Catalog number 14770 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 002500

1.6 003800 004000

2.3 005500 006000

3.5

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 300 0.15 to 1.00 14.4 330 99000

*According to drippers spacing

UNIWINE™ RC 20012 - WITH ASSEMBLY CLIP

Catalog number 14965 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 002500

1.6 004000

2.3 006000

3.5

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 4.0

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 21.0 330 99000

*According to drippers spacing

U n i W i n e ™ RC 37
UNIRAM™ AS XR
INTEGRAL PRESSURE-COMPENSATING, CONTINUOUSLY
SELF-CLEANING, ANTI-SIPHON MECHANISM DRIPPER WITH
IMPROVED RESISTANCE TO ROOT INTRUSION 16010 - 16012 - 20010 - 20012 - 23010

APPLICATIONS
■ Sub-surface multi seasonal row crops.
■ Intensive and multi seasonal irrigated crops (Alfalfa, turf, etc.).

SPECIFICATIONS
■ Pressure-compensating range: 0.5-4.0 bar.
■ Anti-Siphon mechanism.
■ Largest filter in each dripper. Recommended filtration: according to drippers flow rate.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water,a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ Double TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled dripperlines (0.9, 1.0, 1.2 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ UniRam™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Crops are protected against root intrusion better than all other options.
■ Physical root barrier: Better protection against root intrusion without reliance on chemicals.
■ Long lasting protection due to non migrating protection materials embedded in the dripper cover
■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle,
ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging thus making UniRam™ highly resistant when
using low quality water.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.

38
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT * RECOMMENDED
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.7 0.5 – 4.0 0.70 x 0.65 x 40 110 0.7 0 130/120

1.0 0.5 – 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120
1.6 0.5 – 4.0 1.07 x 0.79 x 40 130 1.6 0 200/80
2.3 0.5 – 4.0 1.26 x 0.95 x 40 130 2.3 0 200/80
3.5 0.5 – 4.0 1.59 x 1.10 x 40 150 3.5 0 200/80
* Within working pressure range

U n i Ra m ™ AS X R 39
UNIRAM™™ AS XR 16010
Catalog number : 13735 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 000900

1.6 001610 001710 001900 002010

2.3 003310 003530 003550

3.5 005110

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 22.1 330 165000

*According to drippers spacing

UNIRAM™ AS XR 20010
Catalog number : 14380 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 001000

1.6 001690 001900 001930 002100

2.3 004000 004030 004070

3.5 005000 005030 005050

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20010 1.00 300 0.15 to 1.00 17.4 330 99000

*According to drippers spacing

40 U ni Ram™ AS XR
UNIRAM™ AS XR 20012
Catalog number 14510 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6 002580 002600 002700 002800

2.3 004200 004230 004600 004700 004770 004790

3.5 005690 005700 006200

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 20.2 330 99000

*According to drippers spacing

UNIRAM™ AS XR 23010
Catalog number 14634 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6 002500 002600

2.3 003500 003510

3.5 006200

Bundled
coil length 200 200 200 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

23010 20.80 1.00 22.80 3.0 3.5 0.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

200 0.15 to 0.25 14.7 96000

23010 1.00 480
300 0.15 to 1.00 20.7 144000
*According to drippers spacing
U n i Ra m ™ AS X R 41
UNIGRAY™ CNL AND HCNL
INTEGRAL PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING, ANTI-SIPHON AND
ANTI-DRAIN MECHANISM DRIPPER 16009 - 16010 - 16012 - 17012 - 20010 - 20012

APPLICATIONS
Multi seasonal greenhouses, nurseries and open field crops.

SPECIFICATIONS
■ Pressure-compensating range: according to the product model.
■ Anti-Siphon and Anti-drain mechanism.
■ Largest filter in each dripper. Recommended filtration: 130 micron.
Filtration method id to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclon is to be installed before the main filter.
When sand / silt / clay exceed 100 ppm, pre treatment well be applied according to Netafim™ expert team’s instructions.
■ Double TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled pipes (0.9, 1.0 and 1.2 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ UniRam™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100 % uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ Anti-drain(CNL) system: Eliminates drainage and refill effect, and improves efficiency in pulse irrigation.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a
cycle, ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging thus making UniRam™ highly resistant
when using low quality water.
■ Physical root barrier: Better protection against root intrusion without reliance on chemicals.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ Light gray outside color.

42
DRIPPERS TECHNICAL DATA – CNL MODEL
FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION CONSTANT EXPONENT * RECOMMENDED SHUT OFF
PRESSURE RANGE WIDTH-DEPTH-LENGTH AREA FILTRATION PRESSURE
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH) (BAR)

0.70 1.0 - 4.0 0.70 x 0.65 x 40 110 0.70 0 130/120 0.14

1.00 1.0 - 4.0 0.83 x 0.74 x 40 130 1.00 0 130/120 0.14
1.60 1.0 - 4.0 1.07 x 0.79 x 40 130 1.60 0 130/120 0.14
2.30 1.0 - 4.0 1.26 x 0.95 x 40 130 2.30 0 130/120 0.14
3.50 1.0 - 4.0 1.59 x 1.10 x 40 150 3.50 0 130/120 0.14
* Within working pressure range

DRIPPERS TECHNICAL DATA – HCNL MODEL

FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION CONSTANT EXPONENT * RECOMMENDED SHUT OFF
PRESSURE RANGE WIDTH-DEPTH-LENGTH AREA FILTRATION PRESSURE
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH) (BAR)

0.85 1.5 - 4.0 0.70 x 0.65 x 40 110 0.85 0 130/120 0.25

1.25 1.5 - 4.0 0.83 x 0.74 x 40 130 1.25 0 130/120 0.25
2.00 1.5 - 4.0 1.07 x 0.79 x 40 130 2.00 0 130/120 0.25
2.90 1.5 - 4.0 1.26 x 0.95 x 40 130 2.90 0 130/120 0.25
4.40 1.5 - 4.0 1.59 x 1.10 x 40 150 4.40 0 130/120 0.25
* Within working pressure range

UNIGRAY™ CNL 16010

Catalog number : 13980 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6 002000

2.3

3.5 007500 008000

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 22.1 330 165000

*According to drippers spacing

U n i G r ay ™ C N L a n d HCNL 43
UNIGRAY™ CNL 160120
Catalog number : 13885 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0 002000

1.6

2.3 003000 003100 003150 003200

3.5

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 4.0 5.2 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16012 1.20 400 0.15 to 1.00 21.2 352 140800

*According to drippers spacing

UNIGRAY™ CNL 17012

Catalog number : 14130 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6 002550

2.3 003520 003530

3.5 003990 004000 004010 004013 004015 004020

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

17012 14.60 1.20 17.00 4.0 5.2 1.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

17012 1.20 400 0.15 to 1.00 22.4 352 140800

*According to drippers spacing

44 U ni G ray™ CN L and H C N L
UNIGRAY™ CNL 20012
Catalog number : 14440 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.7

1.0

1.6

2.3 002990

3.5 004950 005000

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 20.2 330 99000

*According to drippers spacing

UNIGRAY™ HCNL 16010

Catalog number : 13985 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85

1.25

2.00

2.90

4.40 006000 006050 006070

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 22.1 330 165000

*According to drippers spacing

U n i G r ay ™ C N L a n d HCNL 45
UNIGRAY™ HCNL 16012
Catalog number : 13885 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85

1.25

2.00 004000 004050

2.90

4.40

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 4.0 5.2 1.3

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16012 1.20 400 0.15 to 1.00 21.2 352 140800

*According to drippers spacing

UNIGRAY™ CNL 17012

Catalog number : 14130 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85

1.25

2.00

2.90

4.40 004900 004930 005000

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

17012 14.60 1.20 17.00 4.0 5.2 1.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

17012 1.20 400 0.15 to 1.00 22.4 352 140800

*According to drippers spacing

46 U ni G ray™ CN L and H C N L
47
DRIPNET PC™ TWD & MWD
COMPACT INTEGRAL PRESSURE-COMPENSATING, 12125 - 12150 - 12200 - 12250 - 16125 - 16150 - 16200
CONTINUOUSLY SELF-CLEANING DRIPPER 16250 - 22135 - 22150 - 22250 - 25135 - 25150 - 25250

APPLICATIONS
On-surface multi seasonal row crops.

SPECIFICATIONS
■ Pressure-compensating range: 0.25/ 0.40/ 0.60-2.5/ 3.0/ 3.5 bar (according to flow rate model & dripperlines wall-thickness).
■ Recommended filtration: according to drippers flow rate.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurboNet™ labyrinth with large water passage.
■ A wide assortment of dripperlines wall thickness models (0.31, 0.34, 0.38, 0.50, 0.63 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ DripNet PC™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of
a cycle, ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.

DRIPPERS TECHNICAL DATA

FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED
RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.4 0.25 - 2.5 0.46 x 0.52 x 26 29 0.4 0 130/120

0.6 0.25 - 2.5 0.52 x 0.60 x 22 39 0.6 0 130/120
1.0 0.40 - 3.0 0.61 x 0.60 x 8 39 1.0 0 130/120
1.6 0.40 - 3.0 0.76 x 0.73 x 8 39 1.6 0 200/80
2.0 0.40 - 3.5 0.84 x 0.80 x 8 39 2.0 0 200/80
3.0 0.40 - 3.5 1.02 x 0.88 x 8 39 3.0 0 200/80
3.8 0.60 - 3.5 1.02 x 0.88 x 8 39 3.8 0 200/80
* Within working pressure range

48
DRIPNET PC™ 12125
Catalog number 17200 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4 000050 000070
0.6 001010 001390 001405 001450
1.0 002850 003060 003220 003460 003480
1.6 005010 005242 005410 005530
2.0 006500
3.0
3.8
Carton
coil length 1000 1100 1100 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12125 11.80 0.31 12.42 2.5 2.9 1.35

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 1000 17.5 480000
12125 0.31 0.20 to 0.25 1100 16.3 12 480 528000
0.30 to 1.00 1200 15.6 576000
*According to drippers spacing

DRIPNET PC™ 12150

Catalog number 17220 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4 000370 000390
0.6 001190 001410 001450
1.0 003095 003150 003225 003430 003470
1.6 005210 005390 005530
2.0 006440 006500
3.0 007700
3.8
Carton
coil length 800 900 900 900 900 900 900 900 900 900 900 900 900 900
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12150 11.80 0.38 12.56 3.0 3.5 1.35

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 800 14.8 384000
12150 0.38 0.20 to 0.35 900 14.5 12 480 432000
0.40 to 1.00 900 14.0 432000
*According to drippers spacing

DripNet PC™ 49
DRIPNET PC™ 12200
Catalog number 17240 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4
0.6 001230 001430
1.0 003240 003430
1.6 005230 005385
2.0 007010
3.0
3.8 008010
Carton
coil length 750 850 850 850 850 850 850 850 850 850 850 850 850 850
(m)
Missing catalog numbers available upon request.
DRIPPERLINES TECHNICAL DATA
MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR)* (BAR)

12200 11.80 0.50 12.80 3.0 3.9 1.35

*Maximum working pressure is defined by the dripper and not by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 750 17.1 360000
12200 0.50 0.20 to 0.35 850 17.4 12 480 408000
0.40 to 1.00 850 16.9 408000
*According to drippers spacing

DRIPNET PC™ 12250

Catalog number 17260 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4
0.6 001030 001210 001450 001530 001630
1.0 003030 003230 003450 003550 003630 003850
1.6 005030 005320 005440 005510 005630 005750 006050
2.0 006200 006460 006770 006800 007050
3.0 008050 008150 008750
3.8 009810 010050 010450
Carton
coil length 650 700 700 800 800 800 800 800 800 800 800 800 800 800
(m)
Missing catalog numbers available upon request.
DRIPPERLINES TECHNICAL DATA
MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR)* (BAR)

12250 11.80 0.63 13.06 3.0 3.9 1.35

*Maximum working pressure is defined by the dripper and not by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 650 19.5 312000
12250 0.63 0.20 to 0.25 700 20.4 12 480 336000
0.30 to 1.00 800 19.1 384000
*According to drippers spacing

50 D ri pN et PC ™
DRIPNET PC™ 16125
Catalog number 17600 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4
0.6 002300 008228 008305 008410 008480
1.0 009870 010055 010185 010260 010455 010705
1.6 011980 012085 012260 012510 012560
2.0 013910 013936 014010
3.0
3.8
Carton
coil length 1000 1150 1150 1150 1150 1300 1300 1300 1300 1300 1300 1300 1300 1300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16125 16.20 0.31 16.82 1.8 2.1 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 1000 20.3 480000
16125 0.31 0.20 to 0.35 1150 21.3 12 480 552000
0.40 to 1.00 1300 22.7 624000
*According to drippers spacing

DRIPNET PC™ 16150

Catalog number 17620 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4 007290 007300 007320
0.6 007650 007795 007830 007895 007940 008010 008210
1.0 009890 010125 010060 010220 010340 010435 010450 010705 010717 010727 010737
1.6 012860 013110 013330 013530 013546 013551 013600 013622 013854 013858
2.0 013887 013896 013960 013980 014110 014116 014121 014126
3.0 015110 015310 016160 016171 016181 016186 016191
3.8 018160
Carton
coil length 950 1100 1100 1100 1100 1200 1200 1200 1200 1200 1200 1200 1200 1200
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16150 16.20 0.38 16.96 2.2 2.5 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 950 23.3 456000
16150 0.38 0.20 to 0.35 1100 24.2 12 480 528000
0.40 to 1.00 1200 25.6 576000
*According to drippers spacing

DripNet PC™ 51
DRIPNET PC™ 16200
Catalog number 17630 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4 000150
0.6 001600 001700 001900 001920 002100
1.0 004090 004120 004200 004350
1.6 005850 005670 005750 005860
2.0 007050 007070
3.0
3.8
Carton
coil length 750 800 800 800 800 850 850 850 850 850 850 850 850 850
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16200 15.50 0.50 16.50 2.5 3.3 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 750 19.9 360000
16200 0.50 0.20 to 0.35 800 19.6 12 480 384000
0.40 to 1.00 850 19.1 408000
*According to drippers spacing

DRIPNET PC™ 16250

Catalog number 17640 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4
0.6 001300 001360 001430 001500 002000 002100 002200 002230
1.0 003850 004020 004240 004260 004460 004640 004820 004870 005050 005080 005090 005150 005250
1.6 006550 006750 006850 007100 007140 007252 007355 007450 007550 007900 008055 008150 008200 008300
2.0 008570 008610 008617 008630 008700 008740 008790 008840 008900 009000 009100 009230
3.0 009900 010270 010300 010320 010400 010500 010650 010670 010740 010850 010900 012100
3.8 013275 013285 013295 013300 013500 013600 013660 013700 013702 013900
Carton
coil length 750 800 800 800 800 800 800 800 800 800 800 800 800 800
(m)
Missing catalog numbers available upon request.
DRIPPERLINES TECHNICAL DATA
MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16250 15.50 0.63 16.76 2.8 3.6 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 750 26.5 360000
16250 0.63 0.20 to 0.35 800 26.9 12 480 384000
0.40 to 1.00 800 26.1 384000
*According to drippers spacing

52 D ri pN et PC ™
DRIPNET PC™ 22135
Catalog number 17740 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 002160 008210 008420 008470
1.0 008600 008620 008650 008670
1.6 010940 011010
2.0 013020
3.0
3.8
Carton
coil length 800 850 850 850 850 950 950 950 950 950 950 950 950 950
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22135 22.20 0.34 22.88 1.5 1.7 0.18

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 800 23.5 384000
22135 0.34 0.20 to 0.35 850 22.9 12 480 408000
0.40 to 1.00 950 24.5 456000
*According to drippers spacing

DRIPNET PC™ 22150

Catalog number 17760 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 008290 001710
1.0 010110 010130 010150
1.6 012010
2.0 013500
3.0
3.8
Carton
coil length 700 800 800 800 800 850 850 850 850 850 850 850 850 850
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22150 22.20 0.38 22.96 1.8 2.1 0.18

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 700 22.6 336000
22150 0.38 0.20 to 0.35 800 23.8 12 480 384000
0.40 to 1.00 850 24.4 408000
*According to drippers spacing

DripNet PC™ 53
DRIPNET PC™ 22250
Catalog number 17780 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001100 001240 001365 001600
1.0 002600 002800 003000 003130 003750
1.6 004100 004300 004500 004850
2.0
3.0 006500
3.8
Carton
coil length 450 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22250 22.20 0.63 23.46 2.5 2.9 0.18

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 450 26.6 216000
22250 0.63 0.20 to 0.35 500 28.0 12 480 240000
0.40 to 1.00 500 27.4 240000
*According to drippers spacing

DRIPNET PC™ 25135

Catalog number 17810 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001800 002000
1.0 003800 004000
1.6
2.0
3.0
3.8
Carton
coil length 650 800 800 800 800 800 800 800 800 800 800 800 800 800
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25135 25.00 0.34 25.68 1.2 1.4 0.04

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 650 19.3 312000
25135 0.34 0.20 to 0.35 800 20.0 12 480 384000
0.40 to 1.00 800 20.9 384000
*According to drippers spacing

54 D ri pN et PC ™
DRIPNET PC™ 25150
Catalog number 17820 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001550 001750
1.0
1.6
2.0
3.0
3.8
Carton
coil length 550 700 700 700 700 700 700 700 700 700 700 700 700 700
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25150 25.00 0.38 25.76 1.4 1.6 0.04

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 550 19.4 264000
25150 0.38 0.20 to 0.35 700 20.0 12 480 336000
0.40 to 1.00 700 22.2 336000
*According to drippers spacing

DRIPNET PC™ 25250

Catalog number 17840 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001600
1.0 002800 003000
1.6 004800 005000
2.0
3.0
3.8
Carton
coil length 450 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25250 25.00 0.63 26.26 2.0 2.3 0.04

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 450 24.4 216000
25250 0.63 0.20 to 0.35 500 26.2 12 480 240000
0.40 to 1.00 500 25.4 240000
*According to drippers spacing

DripNet PC™ 55
DRIPNET PC™ AS TWD & MWD
COMPACT INTEGRAL PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING, ANTI-SIPHON 12125 - 12150 - 12200 - 12250 - 16125 - 16150 - 16200
MECHANISM DRIPPER 16250 - 22135 - 22150 - 22250 - 25135 - 25150 - 25250

APPLICATIONS
Sub-surface multi seasonal row crops.

SPECIFICATIONS
■ Pressure-compensating range: 0.25/ 0.40/ 0.60-2.5/ 3.0/ 3.5 bar (according to flow rate model & dripperlines wall-thickness).
■ Anti-Siphon mechanism.
■ Recommended filtration: according to drippers flow rate.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurboNet™ labyrinth with large water passage.
■ A wide assortment of dripperlines wall thickness models (0.31, 0.34, 0.38, 0.50, 0.63 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ DripNet PC™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of
a cycle, ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.

DRIPPERS TECHNICAL DATA

FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED
RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.6 0.25 - 2.5 0.52 x 0.60 x 22 42 0.6 0 130/120

1.0 0.40 - 3.0 0.61 x 0.60 x 8 42 1.0 0 130/120
1.6 0.40 - 3.0 0.76 x 0.73 x 8 42 1.6 0 200/80
2.0 0.40 - 3.5 0.84 x 0.80 x 8 42 2.0 0 200/80
3.0 0.40 - 3.5 1.02 x 0.88 x 8 42 3.0 0 200/80
3.8 0.60 - 3.5 1.02 x 0.88 x 8 42 3.8 0 200/80
* Within working pressure range

56
DRIPNET PC™ AS 12125
Catalog number 17210 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001370 001470
1.0 002470 002570
1.6 003470 003570
2.0
3.0
3.8
Carton
coil length 900 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12125 11.80 0.31 12.42 2.5 2.9 1.35

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 900 14.3 432000
12125 0.31 0.20 to 0.35 1000 13.6 12 480 480000
0.40 to 1.00 1000 13.0 480000
*According to drippers spacing

DRIPNET PC™ AS 12150

Catalog number 17225 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001300 001370 001470
1.0 002470 002570
1.6 003470 003570
2.0 004610
3.0
3.8
Carton
coil length 600 700 700 700 700 700 700 700 700 700 700 700 700 700
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12150 11.80 0.38 12.56 3.0 3.5 1.35

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 600 11.1 288000
12150 0.38 0.20 to 0.35 700 11.3 12 480 336000
0.40 to 1.00 700 10.9 336000
*According to drippers spacing

D r i p N e t P C ™ AS 57
DRIPNET PC™ AS 12200
Catalog number 17245 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001370 001470
1.0 002470 002570
1.6 003470 003570
2.0
3.0
3.8
Carton
coil length 650 750 750 750 750 850 850 850 850 850 850 850 850 850
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR)* (BAR)

12200 11.80 0.50 12.80 3.0 3.9 1.35

*Maximum working pressure is defined by the dripper and not by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 650 14.9 312000
12200 0.50 0.20 to 0.35 750 15.4 12 480 360000
0.40 to 1.00 850 17.4 408000
*According to drippers spacing

DRIPNET PC™ AS 12250

Catalog number 17270 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001400 001520 001630
1.0 002740 002820 002920 003030
1.6 004100 004220 004350 005100
2.0
3.0
3.8
Carton
coil length 600 700 700 700 700 800 800 800 800 800 800 800 800 800
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR)* (BAR)

12250 11.80 0.63 13.06 3.0 3.9 1.35

*Maximum working pressure is defined by the dripper and not by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 600 16.7 288000
12250 0.63 0.20 to 0.35 700 17.8 12 480 336000
0.40 to 1.00 800 19.9 384000
*According to drippers spacing

58 D ri pN et PC ™ AS
DRIPNET PC™ AS 16125
Catalog number 17610 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 000470 000510 000720 000820
1.0 001579 001671 001815 001915 002020
1.6 003530 003620 003720
2.0
3.0
3.8
Carton
coil length 1000 1150 1150 1150 1150 1300 1300 1300 1300 1300 1300 1300 1300 1300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16125 16.20 0.31 16.82 1.8 2.1 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 1000 20.3 480000
16125 0.31 0.20 to 0.35 1150 21.3 12 480 552000
0.40 to 1.00 1300 22.7 624000
*According to drippers spacing

DRIPNET PC™ AS 16150

Catalog number 17615 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 000470 000495 000580 000634 000672 000697 000699
1.0 001370 001470 001482 001600 001580 001825 002015 002120 002210 002360 002370 002430
1.6 004320 004380 004520 004645 004820 004920 005020 005120
2.0 007170 007451 007625
3.0 007460
3.8
Carton
coil length 900 1000 1000 1000 1000 1200 1200 1200 1200 1200 1200 1200 1200 1200
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16150 16.20 0.38 16.96 2.2 2.5 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 900 21.2 432000
16150 0.38 0.20 to 0.35 1000 21.1 12 480 480000
0.40 to 1.00 1200 25.6 576000
*According to drippers spacing

D r i p N e t P C ™ AS 59
DRIPNET PC™ AS 16200
Catalog number 17635 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001050 001110 001250
1.0 002400 002600
1.6 004550
2.0
3.0
3.8
Carton
coil length 750 800 800 800 800 850 850 850 850 850 850 850 850 850
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16200 15.50 0.50 16.50 2.5 3.3 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 750 19.9 360000
16200 0.50 0.20 to 0.35 800 19.6 12 480 384000
0.40 to 1.00 850 19.1 408000
*According to drippers spacing

DRIPNET PC™ AS 16250

Catalog number 17645 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001300 001400 001500 001600 001605 001620
1.0 002490 002535 002600 002650 002800 003100 003200 003250 003280 003300 003350
1.6 004400 004500 004600 004800 005000 005100 005200 005300 005400
2.0 006050 006060 006100 006250 006260 006352
3.0 007000 007200 007400 007600 007620 007642 007700 007800
3.8 009000
Carton
coil length 700 800 800 800 800 800 800 800 800 800 800 800 800 800
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16250 15.50 0.63 16.76 2.8 3.6 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 700 26.5 336000
16250 0.63 0.20 to 0.35 800 26.9 12 480 384000
0.40 to 1.00 800 26.1 384000
*According to drippers spacing

60 D ri pN et PC ™ AS
DRIPNET PC™ AS 22135
Catalog number 17745 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001200 001310 001440
1.0 002440 002550 002750 002850
1.6 004540 004650 004950
2.0 006300
3.0
3.8
Carton
coil length 750 800 800 800 800 950 950 950 950 950 950 950 950 950
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22135 22.20 0.34 22.88 1.5 1.7 0.18

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 750 22.1 360000
22135 0.34 0.20 to 0.35 800 21.6 12 480 384000
0.40 to 1.00 950 24.5 456000
*According to drippers spacing

DRIPNET PC™ AS 22150

Catalog number 17770 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001470 001600 001850 002050 002070
1.0 003740 003750 003755 003850 004020 004150
1.6 004900 004950 005070 005170 005250
2.0 006170
3.0
3.8
Carton
coil length 650 750 750 750 750 850 850 850 850 850 850 850 850 850
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)
22150 22.20 0.38 22.96 1.8 2.1 0.18

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 650 21.1 312000
22150 0.38 0.20 to 0.35 750 22.4 12 480 360000
0.40 to 1.00 850 24.4 408000
*According to drippers spacing

D r i p N e t P C ™ AS 61
DRIPNET PC™ AS 22250
Catalog number 17790 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001700 001800 002000
1.0 003650 003800 004000 004040
1.6 004850 004870 004950 005050
2.0 006050
3.0 007500
3.8
Carton
coil length 450 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)
22250 22.20 0.63 23.46 2.5 2.9 0.18

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 450 26.6 216000
22250 0.63 0.20 to 0.35 500 28.0 12 480 240000
0.40 to 1.00 500 27.4 240000
*According to drippers spacing

DRIPNET PC™ AS 25135

Catalog number 17815 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001500 001600
1.0 002600
1.6
2.0
3.0
3.8
Carton
coil length 550 700 700 700 700 700 700 700 700 700 700 700 700 700
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25135 25.00 0.34 25.68 1.2 1.4 0.04

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 550 16.7 264000
25135 0.34 0.20 to 0.35 700 19.6 12 480 336000
0.40 to 1.00 700 19.2 336000
*According to drippers spacing

62 D ri pN et PC ™ AS
DRIPNET PC™ AS 25150
Catalog number 17819 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6
1.0 002000
1.6
2.0
3.0
3.8
Carton
coil length 450 600 600 600 600 600 600 600 600 600 600 600 600 600
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25150 25.00 0.38 25.76 1.4 1.6 0.04

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 450 15.0 216000
25150 0.38 0.20 to 0.35 600 18.7 12 480 288000
0.40 to 1.00 600 18.3 288000
*According to drippers spacing

DRIPNET PC™ AS 25250

Catalog number 17850 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001600 001720 001800
1.0 002500 002700 002850
1.6 003850 003870
2.0
3.0
3.8
Carton
coil length 450 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25250 25.00 0.63 26.26 2.0 2.3 0.04

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT PALLET CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.19 450 20.9 216000
25250 0.63 0.20 to 0.35 500 25.0 12 480 240000
0.40 to 1.00 500 24.7 240000
*According to drippers spacing

D r i p N e t P C ™ AS 63
DRIPNET PC™ HWD
COMPACT INTEGRAL PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING DRIPPER 16009 - 16010 - 16012 - 20010 - 20012 - 23009

APPLICATIONS
On-surface multi seasonal row crops.

SPECIFICATIONS
■ Pressure-compensating range: 0.25/ 0.40/ 0.60-2.5/ 3.0/ 3.5 bar (according to flow rate model).
■ Recommended filtration: according to drippers flow rate.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled dripperlines (0.90, 1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ DripNet PC™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of
a cycle, ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.4 0.25 - 2.5 0.46 x 0.52 x 26 29 0.4 0 130/120

0.6 0.25 - 2.5 0.52 x 0.60 x 22 39 0.6 0 130/120
1.0 0.40 - 3.0 0.61 x 0.60 x 8 39 1.0 0 130/120
1.6 0.40 - 3.0 0.76 x 0.73 x 8 39 1.6 0 200/80
2.0 0.40 - 3.5 0.84 x 0.80 x 8 39 2.0 0 200/80
3.0 0.40 - 3.5 1.02 x 0.88 x 8 39 3.0 0 200/80
3.8 0.60 - 3.5 1.02 x 0.88 x 8 39 3.8 0 200/80
* Within working pressure range

64
DRIPNET PC™ 16009
Catalog number 17650 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4 000100
0.6 002325 002335 002340 002890 003210 003300 003400 003500
1.0 004160 004250 004560 004580 004760 004920 005155 005350 005450 005650 005800 006010
1.6 006250 006470 006660 006860 007060 007230 007239 007250 007550 007760 007950 008130
2.0 008350 008400 008405 008470 008510 008610 008650 008700 008800 008910 009100
3.0 010050 010460 010650 010750 011050 011400 011550 011750 012000
3.8 013100 013300 013500 013600 013650 013700 013800 013900 013970 014100
Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16009 14.20 0.90 16.00 2.5/3.0* 3.9 0.72

*The maximum working pressure is defined by the dripper or by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
16009 0.90 0.15 to 1.00 500 18.5 330 165000
*According to drippers spacing

DRIPNET PC™ 16010

Catalog number 17665 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4 000100
0.6 000250 000370 000390 000547 000600 000620 000700 000750 000780 000800 000900 000925 000950
1.0 001060 001160 001450 001625 001820 001875 002060 002125 002160 002200 002600 002800 003050
1.6 005820 006025 006075 006270 006280 006470 006620 006860 006890 007000 007210 007460 007550 007830
2.0 008430 008460 008530 005833 008550 008600 009592 009587 008570 009594 009595 009596 009597
3.0 009620 009635 009685 009690 009790 009940 010120 010160 010250 010530 010720 010800 011120
3.8 012300 012350 012400 012560 012600 012700 012735 012750 012800 012830 012860 013000
Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 2.5/3.0/3.5* 3.9 0.72

*The maximum working pressure is defined by the dripper or by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
16010 1.00 0.15 to 1.00 500 20.4 330 165000
*According to drippers spacing

DripNet PC™ 65
DRIPNET PC™ 16012
Catalog number 17668 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4
0.6 001400
1.0 002400 002500 002600
1.6 003720 003755 003760 004000 004100
2.0 005700 005900 006000 006100 006300 006600
3.0 008100 008500
3.8 008900 009000 009100 009300 009590 009600
Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 2.5/3.0/3.5* 3.9 0.72

* The maximum working pressure is defined by the dripper not by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
16012 1.20 0.15 to 1.00 400 22.4 352 140800
*According to drippers spacing

DRIPNET PC™ 20010

Catalog number 17690 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4 000100
0.6 001000 001100 001150 001380 001800
1.0 001930 001950 002120 002210 002320 002500 002650 002830 002900 003030 003130
1.6 003650 003920 004050 004320 004520 004580 004700 004920 004950 005000
2.0 005200 005220 005230 005280 005330 005400 005490 005494 005495 005497 005620 005650 005700
3.0 005780 005800 005900 005950 006100 006250 006620 006680 006800 007050 008050 009050
3.8 011850 011900 011970 012100 012200 012300 012400 012410 012760 012850 012970 013100 013450
Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 2.5/3.0/3.5* 3.9 0.25

*The maximum working pressure is defined by the dripper or by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
20010 1.00 0.15 to 1.00 300 16.8 330 99000
*According to drippers spacing

66 D ri pN et PC ™
DRIPNET PC™ 20012
Catalog number 17725 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4
0.6 001000 001120 001250
1.0 001990 002050 002150 002220 002240 002260
1.6 003690 003700 003900 004000 004060
2.0 005300 005400 005500 005550 005570 005600
3.0 007490 007500 007600 007650 007900
3.8 009000 009100 009300 009400 009600
Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 2.5/3.0/3.5* 3.9 0.25

* The maximum working pressure is defined by the dripper not by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
20012 1.20 0.15 to 1.00 300 20.3 330 99000
*According to drippers spacing

DRIPNET PC™ 23009

Catalog number 17700 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.4
0.6 001150 001250 001450 001550 001750 001950
1.0 002210 002900 003250 003450 003650 003850 004450
1.6 004950 005750 005795 006000 006600
2.0 007010 007030 007080
3.0 007400 007500 007580 007700 007900 008500
3.8
Carton
coil length 350 350 350 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

23009 20.80 0.90 22.60 2.5/3.0* 3.5 0.20

*The maximum working pressure is defined by the dripper or by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
0.15 to 0.25 350 22.5 168000
23009 0.90 480
0.30 to 1.00 400 25.0 192000
*According to drippers spacing

DripNet PC™ 67
DRIPNET PC™ AS HWD
COMPACT INTEGRAL PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING, ANTI-SIPHON
MECHANISM DRIPPER 16009 - 16010 - 16012 - 20010 - 20012 - 23009

APPLICATIONS
Sub-surface multi seasonal row crops.

SPECIFICATIONS
■ Pressure-compensating range: 0.25/ 0.40/ 0.60-2.5/ 3.0/ 3.5 bar (according to flow rate mode).
■ Anti-Siphon mechanism.
■ Recommended filtration: according to drippers flow rate.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurboNet™ labyrinth with large water passage.
■ To be “welded” into thick-walled dripperlines (0.90, 1.00, 1.20 mm).
■ Injected dripper, very low CV.
■ Injected silicon diaphragm.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ DripNet PC™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ Anti-Siphon mechanism: Prevents contaminants from being drawn into the dripper.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of
a cycle, ensuring uninterrupted dripper operation.
■ Self-flushing system with wide filtration area improves resistance to clogging.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.

DRIPPERS TECHNICAL DATA

FLOW RATE* WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* RECOMMENDED
PRESSURE RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.6 0.25 - 2.5 0.52 x 0.60 x 22 42 0.6 0 130/120

1.0 0.40 - 3.0 0.61 x 0.60 x 8 42 1.0 0 130/120
1.6 0.40 - 3.0 0.76 x 0.73 x 8 42 1.6 0 200/80
2.0 0.40 - 3.5 0.84 x 0.80 x 8 42 2.0 0 200/80
3.0 0.40 - 3.5 1.02 x 0.88 x 8 42 3.0 0 200/80
3.8 0.60 - 3.5 1.02 x 0.88 x 8 42 3.8 0 200/80
* Within working pressure range

68
DRIPNET PC™ AS 16009
Catalog number 17655 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 000900 001100 001200 001300 002000 002100 002200 002300
1.0 002750 002850 002950 003100 003400 003610 003650 003730
1.6 004250 004300 004400 004610 004750 004760 004800 004860 004900 002960 004920
2.0 005050 005065 005100 005110 005150 005200 005250 005400 005550 005553 005595
3.0 005640 005700 005750 005800 005850 005860 006000 006070 006100
3.8 006700 006720 007100 007200
Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16009 14.20 0.90 16.00 2.5/3.0* 3.9 0.72

*The maximum working pressure is defined by the dripper or by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
16009 0.90 0.15 to 1.00 500 18.5 330 165000
*According to drippers spacing

DRIPNET PC™ AS 16010

Catalog number 17705 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001400 001500 001410 001700 001800 001850
1.0 002600 002710 002730 002800 002910 003000 003100 003300 003330 003340 003500
1.6 004100 004210 004300 004330 004400 004500 004600 004700 004800 005000
2.0 005690 005700 005820 005900 006000 006200 006250 006390 006400
3.0 006790 006800 006900 007000 007100 007120 007300 007500
3.8 008950 009000 009145 009150 009160 009170 009200 009300 009500
Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 2.5/3.0/3.5* 3.9 0.72

*The maximum working pressure is defined by the dripper or by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
16010 1.00 0.15 to 1.00 500 20.4 330 165000
*According to drippers spacing

D r i p N e t P C ™ AS 69
DRIPNET PC™ AS 16012
Catalog number 17669 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001000 001030 001040
1.0 002570 002590 002710
1.6 004480 004500 004510 004520
2.0 005400 006000
3.0
3.8 009100 009300
Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 2.5/3.0/3.5* 3.9 0.72

* The maximum working pressure is defined by the dripper not by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
16012 1.20 0.15 to 1.00 400 21.0 352 140800
*According to drippers spacing

DRIPNET PC™ AS 20010

Catalog number 17750 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 000300 000340 000350 000490 000500 000530
1.0 001060 001170 001200 001300 001400 001500 001700
1.6 002270 002290 002650 002900 002990 003100 003200 003400
2.0 003800 003900 004000 004010 004040 004050 004070
3.0 005150 005300 005400 005500 005550 006000
3.8 007100 007200 007230 007300 007500 007550 007600
Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 2.5/3.0/3.5* 3.9 0.25

*The maximum working pressure is defined by the dripper or by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
20010 1.00 0.15 to 1.00 300 16.3 330 99000
*According to drippers spacing

70 D ri pN et PC™ AS
DRIPNET PC™ AS 20012
Catalog number 17728 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001900 002000 002100
1.0 003130 003200 003350 003420
1.6 004880 004900 005000 005100
2.0 005600 005670 005680 005900 006000
3.0 007000
3.8 009000 009100 009300 009600
Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 2.5/3.0/3.5* 3.9 0.25

* The maximum working pressure is defined by the dripper not by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
20012 1.20 0.15 to 1.00 300 20.0 330 99000
*According to drippers spacing

DRIPNET PC™ AS 23009

Catalog number 17800 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.6 001200 001300 001400 001500 001700 001900
1.0 002250 002300 002400 002500 002565 002650 002700 003000
1.6 003020 003200 003250 003400 003700 003800 003880 003900 004300
2.0 004400 004500 004600 004650 004680 004686
3.0 004700 005000 005200 005400 005600 006000
3.8
Carton
coil length 350 350 350 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

23009 20.80 0.90 22.60 2.5/3.0* 3.5 0.20

*The maximum working pressure is defined by the dripper or by the dripperline wall thickness

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)
0.15 to 0.25 350 22.5 168000
23009 0.90 480
0.30 to 1.00 400 25.0 192000
*According to drippers spacing

D r i p N e t P C ™ AS 71
ARIES™ HWD
INTEGRAL DRIPPER 12010 - 16009 - 16010 - 16012 - 20010 - 20012 - 23009

APPLICATIONS
■ Deciduous and tree irrigation.
■ On-surface multi seasonal row crops.

SPECIFICATIONS
■ Maximum system pressure: according to dripperlines wall thickness.
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurbuNext™ labyrinth with superior performance.
■ To be “welded” into thick-walled dripperlines (0.9, 1.0, 1.2 mm).
■ Injected dripper, very low CV.
■ UV resistant.
■ Resistant to standard nutrients used in agricultural.
■ Aries™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Largest filter in each dripper. Wide filtration area to ensure optimal performance even under harsh water conditions.
■ TurbuNext™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
■ Injection molded dripper construction , ensuring uniform drippers and very low CV.

72
DRIPPERS TECHNICAL DATA
12010, 16009, 16010, 20010, 23009 - 0.9 and 1.0 mm wall thickness dripperlines
FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS CONSTANT EXPONENT RECOMMENDED
FILTRATION AREA
PRESSURE WIDTH-DEPTH-LENGTH FILTRATION
(MM²)
(L/H) (BAR) (MM) K X (MICRON)/(MESH)
0.80 3.0/3.5 0.54 x 0.69 x 65 44 0.277 0.46 130/120
1.00 3.0/3.5 0.60 x 0.74 x 65 45 0.347 0.46 130/120
1.50 3.0/3.5 0.71 x 0.85 x 65 48 0.520 0.46 130/120
2.00 3.0/3.5 0.76 x 1.03 x 65 51 0.693 0.46 130/120
3.00 3.0/3.5 0.90 x 1.20 x 65 51 1.040 0.46 130/120
4.00 3.0/3.5 0.94 x 1.28 x 33 51 1.387 0.46 130/120
8.00 3.0/3.5 1.52 x 1.28 x 28 50 2.773 0.46 130/120
*Flow rate at 1.0 bar pressure **According to dripperlines wall thickness

16012, 20012 - 1.2 mm wall thickness dripperlines

FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS CONSTANT EXPONENT RECOMMENDED
FILTRATION AREA
PRESSURE WIDTH-DEPTH-LENGTH FILTRATION
(MM²)
(L/H) (BAR) (MM) K X (MICRON)/(MESH)
0.85 4.0 0.54 x 0.69 x 65 44 0.295 0.46 130/120
1.05 4.0 0.60 x 0.74 x 65 45 0.364 0.46 130/120
1.60 4.0 0.71 x 0.85 x 65 48 0.554 0.46 130/120
2.10 4.0 0.76 x 1.03 x 65 51 0.728 0.46 130/120
3.15 4.0 0.90 x 1.20 x 65 51 1.092 0.46 130/120
4.20 4.0 0.94 x 1.28 x 33 51 1.455 0.46 130/120
8.40 4.00 1.52 x 1.28 x 28 50 2.912 0.46 130/120
*Flow rate at 1.0 bar pressure

ARIES™ HWD 12010

Catalog number 12730 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 001900 002000 002100 002200 002300 002320

1.50 002950 002955 002960

2.00 003000 003350 003300 003400 003600 003800

3.00

4.00 005900 005950 006000 006100 006200 006800

8.00

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12010 10.30 1.00 12.30 4.0 5.2 0.7

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

12010 1.00 500 0.15 to 1.00 20.6 370 185000

*According to drippers spacing

Aries™ HWD 73
ARIES™ HWD 16009
Catalog number 12800 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 001020 001040 001050 001100 001150 001200 001220 001250 001260

1.50 001480 001490 001500 001550 001600 001650 001700 001800 001850

2.00 002550 002600 002650 002660 002700 002750 002800 002850 002860 002870 002900

3.00 003050 003100 003150 003200 003250 003300 003350 003360 003385 003390

4.00 029930 030000 030020 030100 030200 030300 030350 030400 030500 030550 030570 030700

8.00 032060 032070

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16009 14.20 0.90 16.00 3.0 3.9 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16009 0.90 500 0.15 to 1.00 20.7 330 165000

*According to drippers spacing

ARIES™ HWD 16010

Catalog number 12820 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 000800 000950 001000 001100 001150 001200 001250 001300 001400

1.50 006990 007000 007100 007200 007220 007240 007500

2.00 002290 002400 002430 002600 002658 002700 002730 002750 002770 002800 002850 002900

3.00 003980 004000 004100 004200 004300 004350 004400 004500

4.00 005500 005600 005700 005800 005900 005960 006000 006100 006150 006200

8.00 008000

Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16010 1.00 500 0.15 to 1.00 23.0 330 165000

*According to drippers spacing

74 Ari es™ H W D
ARIES™ HWD 16012
Catalog number 12840 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85

1.05 000110 000120 000130

1.60 001500 001530 001560

2.10 002500 002600 002700

3.15 004500

4.20 006000 006210 006200 006250 006500

8.40

Bundled
coil length 400 400 400 400 400 400 400 400 400 400 400 400 400 400
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16012 14.20 1.20 16.60 4.0 5.2 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

16012 1.20 0.20 to 1.00 400 22.3 352 140800

*According to drippers spacing

ARIES™ HWD 20010

Catalog number 12880 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 001000 002000 002050 002100 002150 002200 002250 002300 002350

1.50 002450 007430 007460 007480 007500

2.00 003500 003550 003600 003590 003650 003700 003750 003770 003800 003900 004000 004050

3.00 004500 004550 004600 004650 004700 004750 004800 004850 004880

4.00 004900 004950 005000 005020 005050 005100 005150 005200 005250 005710 005750 005950

8.00 008970 008980 009000 009020

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20010 17.50 1.00 19.50 3.5 4.6 0.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20010 1.00 300 0.15 to 1.00 16.7 330 99000

*According to drippers spacing

Aries™ HWD 75
ARIES™ HWD 20012
Catalog number 12890 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.85

1.05 001400 001500 001600 001650

1.60 002630 002640 002680

2.10 003550 003600 003700 003800 003900 004050 004070 004200

3.15 004500 004550 004800 004900

4.20 005000 005100 006000 006200 006220 006250

8.40

Bundled
coil length 300 300 300 300 300 300 300 300 300 300 300 300 300 300
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

20012 17.50 1.20 19.90 4.0 5.2 0.1

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

20012 1.20 300 0.15 to 1.00 20.2 330 99000

*According to drippers spacing

ARIES™ HWD 23009

Catalog number 12920 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 002090 002100 002150 002200 002250 002300 002350

1.50 002490 002500

2.00 002800 002850 002900 002950 003000 003050

3.00 003500 003550 003600 003650 003700 003750

4.00 004550 004750

8.40

Carton
coil length 450 450 450 450 450 450 450 450 450 450 450 450 450 450
(m)
Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

23009 20.80 0.90 22.60 3.0 3.9 0.07

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

23009 0.90 450 0.15 to 1.00 24.5 480 216000

*According to drippers spacing

76 A ri es™H W D
ARIES™ MWD 12200 - 12250 -16200 - 16250 - 16007
INTEGRAL DRIPPER 16008 - 22200 - 22250 - 25200

APPLICATIONS
n On-surface multi seasonal row crops.
n Sub-surface multi seasonal row crops.

SPECIFICATIONS
n Maximum system pressure: according to dripperlines wall thickness.
n Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
n TurbuNext™ labyrinth with superior performance.
n To be “welded” into medium-walled dripperlines (0.50, 0.63, 0.70, 0.80 mm).
n Injected dripper, very low CV.
n UV resistant.
n Resistant to standard nutrients used in agricultural.
n Aries™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

n Largest filter in each dripper. Wide filtration area to ensure optimal performance even under harsh water conditions.
n TurbuNext™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
n The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
n Injection molded dripper construction , ensuring uniform drippers and very low CV.

78
DRIPPERS TECHNICAL DATA
12200, 16200, 22200, 25200, 12250, 16250, 22250, 16007 - 0.50, 0.63 and 0.7 mm wall thickness dripperlines
FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS CONSTANT EXPONENT RECOMMENDED
FILTRATION AREA
PRESSURE** WIDTH-DEPTH-LENGTH FILTRATION
(MM²)
(L/H) (BAR) (MM) K X (MICRON)/(MESH)
0.80 1.6 up to 3.5 0.54 x 0.69 x 65 44 0.277 0.46 130/120
1.00 1.6 up to 3.5 0.60 x 0.74 x 65 45 0.347 0.46 130/120
1.40 1.6 up to 3.5 0.71 x 0.85 x 65 48 0.485 0.46 130/120
1.90 1.6 up to 3.5 0.76 x 1.03 x 65 51 0.659 0.46 130/120
2.85 1.6 up to 3.5 0.90 x 1.20 x 33 51 0.988 0.46 130/120
3.80 1.6 up to 3.5 0.94 x 1.28 x 33 51 1.316 0.46 130/120
*Flow rate at 1.0 bar pressure **According to dripperlines diameter and wall thickness

16008 - 0.8 mm wall thickness dripperlines

FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS CONSTANT EXPONENT RECOMMENDED
FILTRATION AREA
PRESSURE WIDTH-DEPTH-LENGTH FILTRATION
(MM²)
(L/H) (BAR) (MM) K X (MICRON)/(MESH)
0.80 3.00 0.54 x 0.69 x 65 44 0.277 0.46 130/120
1.00 3.00 0.60 x 0.74 x 65 45 0.347 0.46 130/120
1.50 3.00 0.71 x 0.85 x 65 48 0.520 0.46 130/120
2.00 3.00 0.76 x 1.03 x 65 51 0.693 0.46 130/120
3.00 3.00 0.90 x 1.20 x 33 51 1.040 0.46 130/120
4.00 3.00 0.94 x 1.28 x 33 51 1.387 0.46 130/120
*Flow rate at 1.0 bar pressure

ARIES™ MWD 12200

Catalog number 12750 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 001000 001010

1.40 002040 002045

1.90 003000 003300

2.85 004100 004300

3.80

Carton coil
800 800 800 900 900 900 900 900 900 900 900 900 900 900
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12200 11.80 0.50 12.80 3.0 3.9 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 800 17.6 480 384000

12200 0.50
0.30 to 1.00 900 18.8 480 432000
*According to drippers spacing

A r i e s ™ MW D 79
ARIES™ MWD 12250
Catalog number 12760 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 001000 001020

1.40

1.90

2.85

3.80

Carton coil
700 700 700 750 750 750 750 750 750 750 750 750 750 750
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12250 11.80 0.63 13.06 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 700 17.6 480 336000

12250 0.63
0.30 to 1.00 750 18.8 480 360000
*According to drippers spacing

ARIES™ MWD 16200

Catalog number 12930 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80 008000

1.00 000020 000050 000070

1.40 000180 000200 000210 000220 000230

1.90 000710 000870 004550 002700 002720

2.85 004110 004150 004250 004600

3.80 006110 006150 006200 006260 006310

Carton coil
850 850 850 900 900 900 900 900 900 900 900 900 900 900
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16200 15.50 0.50 16.50 2.5 3.3 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 850 23.1 480 408000

16200 0.50
0.30 to 1.00 900 23.7 480 432000
*According to drippers spacing

80 Ari es™ M W D
ARIES™ MWD 16250
Catalog number 12940 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80 000100

1.00 000900 001020 001052 001057 001080 001090

1.40 001500 001510 001520 001530

1.90 002420 002460 002480 002605 002630 002730

2.85 005570 005590 005610

3.80

Carton coil
750 750 750 800 800 800 800 800 800 800 800 800 800 800
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16250 15.50 0.63 16.76 2.8 3.6 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 750 25.4 480 360000

16250 0.63
0.30 to 1.00 800 26.3 480 384000
*According to drippers spacing

ARIES™ MWD 16008

Catalog number 12960 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 001010 001060 001066 001071 001076 001100 001120

1.50 001470 001500 001511 001521 001531 001541 001571

2.00 002355 002450 002600 002800 002811 002831 002871

3.00 004300 004350

4.00 006300 006311 006321 006331 006341 006371

Carton coil
450 500 500 500 500 500 500 500 500 500 500 500 500 500
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16008 15.50 0.80 17.10 3.0 3.9 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 450 19.4 480 216000

16008 0.80
0.20 to 1.00 500 21.0 480 240000
*According to drippers spacing

A r i e s ™ MW D 81
ARIES™ MWD 22250
Catalog number 12970 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 001900 002000 002100

1.40 003100 003200 003250

1.90

2.85

3.80

Carton coil
550 550 550 600 600 600 600 600 600 600 600 600 600 600
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22250 22.20 0.63 23.56 2.5 3.3 0.06

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 550 25.7 480 264000

22250 0.63
0.30 to 1.00 600 27.4 480 288000
*According to drippers spacing

ARIES™ MWD 25250

Catalog number 12975 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

1.00 001800 001900 002000

1.40 003150 003200

1.90 004200

2.85

3.80

Carton coil
500 500 500 550 550 550 550 550 550 550 550 550 550 550
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25250 25.00 0.63 26.26 2.5 3.3 0.06

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 550 25.7 480 264000

25250 0.63
0.30 to 1.00 600 27.4 480 288000
*According to drippers spacing

82 Ari es™ M W D
83
ARIES™ TWD
INTEGRAL DRIPPER 16125 - 16150 - 22125 – 22135 -22150

APPLICATIONS
n On-surface multi seasonal row crops.
n Sub-surface multi seasonal row crops.

SPECIFICATIONS
n Maximum system pressure: according to dripperlines wall thickness.
n Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
n TurbuNext™ labyrinth with superior performance.
n To be “welded” into medium-walled dripperlines (0.31, 0.34, 0.38 mm).
n Injected dripper, very low CV.
n UV resistant.
n Resistant to standard nutrients used in agricultural.
n Aries™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

n Largest filter in each dripper. Wide filtration area to ensure optimal performance even under harsh water conditions.
n TurbuNext™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
n The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
n Injection molded dripper construction, ensuring uniform drippers and very low CV.

DRIPPERS TECHNICAL DATA

16125, 16150 - 22125 - 22135 – 22150 -- 0.31, 0.34 and 0.38 mm wall thickness dripperlines
FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT RECOMMENDED
PRESSURE** WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X ( MICRON)/(MESH)

0.95 1.5 up to 2.2 0.60 x 0.74 x 65 45 0.329 0.46 130/120

1.35 1.5 up to 2.2 0.71 x 0.85 x 65 48 0.468 0.46 130/120
1.85 1.5 up to 2.2 0.76 x 1.03 x 65 51 0.641 0.46 130/120
2.80 1.5 up to 2.2 0.90 x 1.20 x 65 51 0.971 0.46 130/120
3.80 1.5 up to 2.2 0.94 x 1.28 x 33 51 1.318 0.46 130/120
*Flow rate at 1.0 bar pressure ** According to dripperlines diameter and wall thickness

84
ARIES™ TWD 12150
Catalog number 12740 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

0.95 002010 002046

1.35

1.85

2.80

3.80

Carton coil
1000 1100 1100 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12150 11.80 0.38 12.56 3.0 3.9 0.4

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 1000 19.1 480000

12150 0.38 0.20 to 0.25 1100 19.3 480 528000
0.30 to 1.00 1200 19.8 576000
*According to drippers spacing

ARIES™ TWD 16125

Catalog number 12935 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

0.95 002230 002300 002302 002310 003220

1.35 006990 007010 007030

1.85 003245 003240 003300 003330 003360

2.80 004240 004300 004340 004400

3.80 005220 005240 005300 005320 005340 005360

Carton coil
1000 1000 1000 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16125 16.20 0.31 16.82 1.8 2.3 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 1000 18.7 640 640000

16125 0.31
0.30 to 1.00 1100 19.5 640 704000
*According to drippers spacing

Aries™ TWD 85
ARIES™ TWD 16150
Catalog number 12937 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80 001100

0.95 002020 002050 002056 002080 002090

1.35 003030 003050 003070 003090

1.85 003478 003500 003520 003540 003560

2.80 004480 004500 004520 004600

3.80 006000 006020 006040 006120

Carton coil
900 900 900 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16150 16.20 0.38 16.96 2.2 2.9 0.3

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 900 20.1 640 576000

16150 0.38
0.30 to 1.00 1000 21.4 640 640000
*According to drippers spacing

ARIES™ TWD 22125

Catalog number 12965 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.33 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00

0.80

0.95 002050 002100 002150

1.35 002600 002640 002660

1.85 003050 003100 003150

2.80

3.80 004000

Carton coil
900 900 900 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22125 22.20 0.31 22.82 1.5 2.0 0.06

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL THICKNESS DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.15 to 0.25 900 21.9 640 576000

22125 0.31
0.30 to 1.00 1000 23.4 640 640000
*According to drippers spacing

86 A ri es™ TW D
TYPHOON PLUS™ 12080 - 12100 - 12125 - 12150 - 16080- 16100 - 16125 - 16150 - 22080
INTEGRAL DRIPPER 22100 - 22125 - 22135 - 22150 - 25080 - 25100 - 25125 - 25135 - 25150

APPLICATIONS
■ Row crops and vegetables, multi seasonal irrigation.
■ On or Sub Surface installations.
BENEFITS AND FEATURES
High & uniform yield year after year
■ Innovative labyrinth - TurbuNext™ - with wide water passages, large deep and wide cross section, allows usage of harsh
water while using regular filtration technologies.
■ Wide filtration area that ensures optimal performance even under harsh water conditions.
The unique innovative labyrinth - TurbuNext™, with the wide filtration area allows reducing filtration requirements resulting
in less flushing, and waste of water and energy.
■ Unique filter design, the water is drawn in to the dripper near the stream center, that prevents the entrance of sediments
into the drippers.
■ Typhoon Plus’s exponent X is 0.45 meaning low variation between drippers along the lateral resulting in more uniform yield
Reliability & confidence
■ The Typhoon Plus™ is manufactured according to the highest levels of quality control and assurance.
Complying with International Standard ISO 9261.
■ Injection molded dripper construction, ensuring uniform drippers and very low CV.
SPECIFICATIONS
■ 5 different flow rates.
■ Maximum system pressure: according to dripperlines diameters and wall thickness.
■ Recommended filtration: according to dripper flow rate.
Filtration method to be selected based on the kind and concentration of the contaminants existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclon should be installed before the main filter.
When sand / silt / clay exceed 100 ppm, pre-treatment should be applied according to Netafim™ expert team’s instructions.
■ Wide range of diameters and wall thicknesses.
Diameter: from 12.0 to 25.0 mm.
Wall thickness: from 0.20 to 0.40 mm (8 to 15 mil).
■ Injected dripper, very low CV.
■ UV resistant.
■ Resistant to standard nutrients used in agricultural.
DRIPPERS TECHNICAL DATA
FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT RECOMMENDED
PRESSURE** WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X ( MICRON)/(MESH)
0.50 0.6 up to 3.0 0.45 x 0.45 x 34 21 0.177 0.45 130/120
0.70 0.6 up to 3.0 0.52 x 0.51 x 34 22 0.247 0.45 130/120
1.00 0.6 up to 3.0 0.60 x 0.59 x 34 24 0.355 0.45 200/80
1.60 0.6 up to 3.0 0.66 x 0.63 x 18 24 0.567 0.45 200/80
2.20 0.6 up to 3.0 0.77 x 0.72 x 18 24 0.780 0.45 200/80
*Flow rate at 1.0 bar pressure ** According to dripperlines diameter and wall thickness

88
TYPHOON PLUS™ 12125 (WITH HOLE OUTLET)
Catalog number 15686 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00 000100
1.60 000130
2.20

Carton coils
1200 1200 1200 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12125 11.80 0.31 12.42 2.5 2.9 0.20

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1200 15.6 768000
12125 0.31 16 640
0.30 to 1.00 1300 16.3 832000
*According to drippers spacing

TYPHOON PLUS™ 12150 (WITH HOLE OUTLET)

Catalog number 15688 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00 000100 000130
1.60
2.20

Carton coils
1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

12150 11.80 0.38 12.56 3.0 3.5 0.20

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1100 17.2 704000
12150 0.38 16 640
0.30 to 1.00 1100 16.8 704000
*According to drippers spacing

Typ h o o n P l u s ™ 89
TYPHOON PLUS™ 16080 (WITH FLAP OUTLET)
Catalog number 15690 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00 000160
1.60 000490 000520
2.20

Carton coils
2400 2400 2400 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 16080 (WITH HOLE OUTLET)

Catalog number 15690 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00 000100 000130 000260 000140
1.60 000460 000550
2.20

Carton coils
2400 2400 2400 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16080 16.20 0.20 16.60 1.0 1.2 0.10

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 2400 26.9 1536000
16080 0.20 16 640
0.30 to 1.00 2500 27.1 1600000
*According to drippers spacing

90 Typhoon Pl us ™
TYPHOON PLUS™ 16100 (WITH FLAP OUTLET)
Catalog number 15695 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00 000100 000130 000160 000220 000250
1.60 000410 000470 000500 000560
2.20

Carton coils
1900 1900 1900 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 16100 (WITH HOLE OUTLET)

Catalog number 15695 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00 000190 000280
1.60 000440 000530 000650
2.20

Carton coils
1900 1900 1900 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16100 16.20 0.25 16.70 1.2 1.4 0.10

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1900 26.9 1216000
16100 0.25 16 640
0.30 to 1.00 2000 26.9 1280000
*According to drippers spacing

Typ h o o n P l u s ™ 91
TYPHOON PLUS™ 16125 (WITH FLAP OUTLET)
Catalog number 15700 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 000100
1.00 000230 000290 000350 000440
1.60 000540 000630
2.20

Carton coils
1350 1350 1350 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 16125 (WITH HOLE OUTLET)

Catalog number 15700 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00 000200 000260 000320 000380 000410
1.60 000600 000660 000690 000750
2.20

Carton coils
1350 1350 1350 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16125 16.20 0.31 16.82 1.8 2.1 0.10

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1350 26.2 864000
16125 0.31 16 640
0.30 to 1.00 1600 26.5 1024000
*According to drippers spacing

92 Typhoon Pl us ™
TYPHOON PLUS™ 16150 (WITH FLAP OUTLET)
Catalog number 15705 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 000100 000130
1.00 000290 000410
1.60 000510 000540 000840 000940
2.20

Carton coils
1200 1200 1200 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 16150 (WITH HOLE OUTLET)

Catalog number 15705 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00 000230 000260 000320 000380
1.60 000640
2.20

Carton coils
1200 1200 1200 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16150 16.20 0.38 16.96 2.2 2.5 0.10

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1200 26.5 768000
16150 0.38 16 640
0.30 to 1.00 1300 26.0 832000
*According to drippers spacing

Typ h o o n P l u s ™ 93
TYPHOON PLUS™ 22080 (WITH FLAP OUTLET)
Catalog number 15710 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50 001100
0.70 001150 001250 001350 001450
1.00 001600 001750 001850 001950 002100
1.60 002200 002300 002350
2.20 002400

Carton coils
1500 1500 1500 1700 1700 1700 1700 1700 1700 1700 1700 1700 1700 1700
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 22080 (WITH HOLE OUTLET)

Catalog number 15710 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 001200 001300 001400 001500
1.00 001560 001650 001700 001800 001900 002000 002050
1.60 002150 002250
2.20 002450

Carton coils
1500 1500 1500 1700 1700 1700 1700 1700 1700 1700 1700 1700 1700 1700
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22080 22.20 0.20 22.60 0.8 0.9 0.02

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1500 26.9 960000
22080 0.20 16 640
0.30 to 1.00 1700 27.6 1088000
*According to drippers spacing

94 Typhoon Pl us ™
TYPHOON PLUS™ 22100 (WITH FLAP OUTLET)
Catalog number 15715 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 001250 001350 001450 001550
1.00 001600 001650 001750 001900 002000
1.60 002200 002350 002500 002550
2.20

Carton coils
1200 1200 1200 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 22100 (WITH HOLE OUTLET)

Catalog number 15715 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 001200 001300 001400 001500
1.00 001700 001800 001850 001950 002050
1.60 002100 002150 002300 002450
2.20 002650

Carton coils
1200 1200 1200 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22100 22.20 0.25 22.70 1.0 1.2 0.02

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1200 25.8 768000
22100 0.25 16 640
0.30 to 1.00 1500 27.1 960000
*According to drippers spacing

Typ h o o n P l u s ™ 95
TYPHOON PLUS™ 22135 (WITH FLAP OUTLET)
Catalog number 15725 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 001250 001300 001400 001500 001550
1.00 001650 001750 001800 001900 002050 002150 002200 002250
1.60 002350 002450 002550 002650 002750 002850 002950 003000 003050 003200
2.20 003300 003400 003500 003600

Carton coils
1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 22135 (WITH HOLE OUTLET)

Catalog number 15715 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 001150 001200 001350 001450
1.00 001600 001700 001850 002000 002100
1.60 002300 002400 002500 002600 002700 002800 003100 003150
2.20 003250 003350 003450 003550

Carton coils
1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22135 22.20 0.34 22.88 1.5 1.7 0.02

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1100 27.2 704000
22135 0.34 16 640
0.30 to 1.00 1100 26.8 704000
*According to drippers spacing

96 Typhoon Pl us ™
TYPHOON PLUS™ 22150 (WITH FLAP OUTLET)
Catalog number 15730 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 001250 001300 001400 001500 001550
1.00 001600 001700 001800 001900 002000 002050 002100
1.60 002150 002200 002250 002300 002350 002450 002500 002600 002650 002700
2.20 002850 002900 002950 003000 003050

Carton coils
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 22150 (WITH HOLE OUTLET)

Catalog number 15730 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 001200 001350 001450
1.00 001650 001750 001850 001950
1.60 002800 002400
2.20

Carton coils
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22150 22.20 0.38 22.96 1.8 2.1 0.02

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1000 27.6 640000
22150 0.38 16 640
0.30 to 1.00 1000 27.2 640000
*According to drippers spacing

Typ h o o n P l u s ™ 97
TYPHOON PLUS™ 25135 (WITH FLAP OUTLET)
Catalog number 15740 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70 001200
1.00 001250 001300
1.60 001450 001500
2.20

Carton coils
900 900 900 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 25135 (WITH HOLE OUTLET)

Catalog number 15740 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00
1.60 001350 001400
2.20

Carton coils
900 900 900 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25135 25.00 0.34 25.68 1.2 1.4 0.01

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 900 25.0 576000
25135 0.34 16 640
0.30 to 1.00 1000 27.3 640000
*According to drippers spacing

98 Typhoon Pl us ™
TYPHOON PLUS™ 25150 (WITH FLAP OUTLET)
Catalog number 15745 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50 000500
0.70 001200
1.00 001250 001300 001350 001400
1.60 001450 001500
2.20

Carton coils
900 900 900 900 900 900 900 900 900 900 900 900 900 900
length (m)

Missing catalog numbers available upon request.

TYPHOON PLUS™ 25150 (WITH HOLE OUTLET)

Catalog number 15745 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.50
0.70
1.00
1.60
2.20

Carton coils
900 900 900 900 900 900 900 900 900 900 900 900 900 900
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

25150 25.00 0.38 25.76 1.4 1.6 0.01

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 900 27.7 576000
25150 0.38 16 640
0.30 to 1.00 900 27.4 576000
*According to drippers spacing

Typ h o o n P l u s ™ 99
STREAMLINE PLUS™ 16055 - 16060 - 16080 - 16100 - 16125
INTEGRAL DRIPPER 22060 - 22080 - 22100 - 22125 - 22135

APPLICATIONS
Single season crops irrigation.

SPECIFICATIONS
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever
sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/ silt/ clay
solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurboNet™ labyrinth with large water passage.
■ To be “welded” into a thin-walled dripperlines (0.14, 0.15, 0.20, 0.25, 0.31 mm).
■ Injected dripper, very low CV.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ Streamline™ drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Two orange stripes on the Streamline Plus™, which are clear and visible; show the dripper upward location in order to
properly lay the laterals.
■ Improved raw materials that achieve higher operating pressure and tensile strength.
■ Wide filtration area to ensure optimal performance.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
■ The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
■ Injection molded dripper construction, ensuring uniform drippers and very low CV.

100
DRIPPERS TECHNICAL DATA
0.14, 0.15 mm wall thickness dripperlines
FLOW RATE* MAX. WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT RECOMMENDED
PRESSURE** WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

0.80 0.9/1.0 0.59 x 0.33 x 25 12 0.265 0.48 130/120

1.10 0.9/1.0 0.51 x 0.44 x 13 14 0.392 0.45 130/120
1.60 0.9/1.0 0.65 x 0.55 x 13 15 0.568 0.45 130/120
2.20 0.9/1.0 0.72 x 0.68 x 13 15 0.780 0.45 130/120
* Flow rate at 1.0 bar pressure **According to dripperlines diameter and wall thicknesses

0.20 mm wall thickness dripperlines

0.72 1.0/1.2 0.59 x 0.33 x 25 12 0.238 0.48 130/120
1.05 1.0/1.2 0.51 x 0.44 x 13 14 0.373 0.45 130/120
1.60 1.0/1.2 0.65 x 0.55 x 13 15 0.568 0.45 130/120
2.20 1.0/1.2 0.72 x 0.68 x 13 15 0.780 0.45 130/120
* Flow rate at 1.0 bar **According to dripperlines diameter and wall thickness

0.25, 0.31, 0.34 mm wall thickness dripperlines

0.72 1.0/1.8 0.59 x 0.33 x 25 12 0.238 0.48 130/120
1.05 1.0/1.8 0.51 x 0.44 x 13 14 0.373 0.45 130/120
1.60 1.0/1.8 0.65 x 0.55 x 13 15 0.568 0.45 130/120
2.10 1.0/1.8 0.72 x 0.68 x 13 15 0.740 0.45 130/120
* Flow rate at 1.0 bar **According to dripperlines diameter and wall thickness

St r e a m l i n e P l u s ™ 101
STREAMLINE PLUS™ 16055 (WITH FLAP OUTLET)
Catalog number 16220 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.80 001020 001070 001090
1.10 003020 003065 003090
1.60 005020
2.20

Carton coils
3200 3200 3200 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 16055 (WITH HOLE OUTLET)

Catalog number 16220 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.80 001010 001060 001080
1.10 003010 003060 003080
1.60 005010 005040 005060
2.20 006010 006030 006050

Carton coils
3200 3200 3200 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16055 16.20 0.14 16.48 0.9 1.0 0.1

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 3200 24.5 2048000
16055 0.14 16 640
0.30 to 1.00 3500 25.6 2240000
*According to drippers spacing

102 Streaml i ne Pl us ™
STREAMLINE PLUS™ 16060 (WITH FLAP OUTLET)
Catalog number 16225 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.80 004990 000105 005010 005030
1.10 005190 005210 005230 005250 005260
1.60 005954 005995 006000 006020
2.20 007480 007500

Carton coils
2600 2600 2600 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 16060 (WITH HOLE OUTLET)

Catalog number 16225 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.80 000080 000101 000103 000111 000120 000175
1.10 000490 000501 000506 000511 000520 000530
1.60 000990 000996 001010 001030 001050
2.20 001990 001997 002010 002030

Carton coils
2600 2600 2600 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16060 16.20 0.15 16.50 1.0 1.2 0.1

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 2600 21.5 2080000
16060 0.15 20 800
0.30 to 1.00 3000 24.0 2400000
*According to drippers spacing

Streamline Plus™ 103

STREAMLINE PLUS™ 16080 (WITH FLAP OUTLET)
Catalog number 16230 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 003980 003995 004010 004040 004060
1.05 004990 005010 005020 005060 005090 005110 005130
1.60 005995 006000 006020
2.20 007000

Carton coils
2200 2200 2200 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 16080 (WITH HOLE OUTLET)

Catalog number 16230 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 000010 000002 000020 000004 000006
1.05 000098 000110 000115 000130 000150 000170 000190 000250
1.60 000990 001010 001030 001060 001090 001110
2.20 002470 002490 002496 002510 002530 005140

Carton coils
2200 2200 2200 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16080 16.20 0.20 16.60 1.20 1.4 0.1

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 2200 23.7 1760000
16080 0.20 20 800
0.30 to 1.00 2500 26.3 2000000
*According to drippers spacing

104 Streaml i ne Pl us ™
STREAMLINE PLUS™ 16100 (WITH FLAP OUTLET)
Catalog number 16240 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72
1.05 002820
1.60
2.20

Carton coils
1800 1800 1800 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 16100 (WITH HOLE OUTLET)

Catalog number 16240 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 002540 002580 002640
1.05 002700 002740 002800
1.60 002880 002940 002980 003000
2.20 003020 003060

Carton coils
1800 1800 1800 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16100 16.20 0.25 16.70 1.0 1.2 0.1

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1800 23.6 1440000
16100 0.25 20 800
0.30 to 1.00 2000 25.9 1600000
*According to drippers spacing

Streamline Plus™ 105

STREAMLINE PLUS™ 16125 (WITH FLAP OUTLET)
Catalog number 16245 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 003120
1.05 003220 003260
1.60 003320 003400
2.20

Carton coils
1100 1100 1100 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 16125 (WITH HOLE OUTLET)

Catalog number 16245 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 003080 003100
1.05 003160 003200 003240
1.60 003300 003340 003360 003420
2.20 003460 003480 003500 003560

Carton coils
1100 1100 1100 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

16125 16.20 0.31 16.82 1.8 2.1 0.1

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1100 17.9 880000
16125 0.31 20 800
0.30 to 1.00 1300 20.9 1040000
*According to drippers spacing

106 Streaml i ne Pl us ™
STREAMLINE PLUS™ 22060 (WITH FLAP OUTLET)
Catalog number 16260 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 001030
1.05 002005 002015
1.60
2.20

Carton coils
2200 2200 2200 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 22060 (WITH HOLE OUTLET)

Catalog number 16260 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 001000 001010 001020
1.05 002000 002010 002020
1.60 003050 003060
2.20

Carton coils
2200 2200 2200 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22060 22.20 0.15 22.50 0.8 0.9 0.01

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 2200 23.5 1408000
22060 0.15 16 640
0.30 to 1.00 2400 26.0 1536000
*According to drippers spacing

St r e a m l i n e P l u s ™ 107
STREAMLINE PLUS™ 22080 (WITH FLAP OUTLET)
Catalog number 16270 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 004990 003860 005010 005020 005040
1.05 005190 003950 005210 005230 005250
1.60 006980 007000 007020
2.20

Carton coils
1600 1600 1600 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 22080 (WITH HOLE OUTLET)

Catalog number 16270 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 000990 001010 001018 001030 001050 001070
1.05 001990 002010 002030 002050 002150
1.60 002990 003010 003030 003045
2.20 003990 003995 004010 004030

Carton coils
1600 1600 1600 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22080 22.20 0.20 22.60 1.0 1.2 0.01

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1600 23.6 1024000
22080 0.20 16 640
0.30 to 1.00 1800 25.6 1152000
*According to drippers spacing

108 Streaml i ne Pl us ™
STREAMLINE PLUS™ 22100 (WITH FLAP OUTLET)
Catalog number 16275 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 004160 004200 004260
1.05 004280 004320 004380 004420
1.60 004480 004540
2.20

Carton coils
1200 1200 1200 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 22100 (WITH HOLE OUTLET)

Catalog number 16275 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72
1.05
1.60 004460 004520
2.20

Carton coils
1200 1200 1200 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22100 22.20 0.25 22.70 1.0 1.2 0.01

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.15 to 0.25 1200 22.0 768000
22100 0.25 16 640
0.30 to 1.00 1500 26.6 960000
*According to drippers spacing

Streamline Plus™ 109

STREAMLINE PLUS™ 22125 (WITH FLAP OUTLET)
Catalog number 16278 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72 004560 004580 004620 004660
1.05 004700 004800
1.60 004840
2.20

Carton coils
1100 1100 1100 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
length (m)

Missing catalog numbers available upon request.

STREAMLINE PLUS™ 22125 (WITH HOLE OUTLET)

Catalog number 16278 - (any of below 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
0.72
1.05 004680 004780
1.60 004820 004880
2.20 004940 004960

Carton coils
1100 1100 1100 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200
length (m)

Missing catalog numbers available upon request.

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE MAXIMUM FLUSHING PRESSURE KD
(MM) (MM) (MM) (BAR) (BAR)

22125 22.20 0.31 22.82 1.2 1.4 0.01

DRIPPERLINES PACKAGE DATA (ON CARTON COILS)

MODEL WALL DISTANCE BETWEEN COIL LENGTH AVERAGE* COIL COILS PER PALLET COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS WEIGHT CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (UNITS) (M)
0.10 to 0.25 1100 20.8 704000
22125 0.31 16 640
0.30 to 1.00 1200 25.5 768000
*According to drippers spacing

110 Streaml i ne Pl us ™
111
MICRODRIP
INTEGRAL DRIPPER

APPLICATIONS
■ Row crops irrigation (very short irrigation lines).
■ Family Drip Systems.
■ Nurseries & Kitchen gardens.

SPECIFICATIONS
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/
silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurboNet™ labyrinth with large water passage.
■ To be “welded” into a medium-walled dripperline (0.80 mm).
■ Injected dripper, very low CV.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ Microdrip drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
■ Wide filtration area with improved resistance to clogging.
■ Specifically suitable when short drip line lengths are required.
■ Injection molded dripper construction, ensuring uniform drippers and very low CV.

DRIPPERS TECHNICAL DATA

FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT RECOMMENDED
PRESSURE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

2.0 4.0 0.63 x 0.73 x 22 22 0.647 0.49 130/120

*Flow rate at 1.0 bar pressure

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD

(MM) (MM) (MM) (BAR)

Microdrip 6.30 0.80 7.90 4.0 2.0

112
MICRODRIP
Catalog number 18500 - (any of below 6 digits)
FLOW RATE DISTANCE BETWEEN COIL LENGTH (METER)
DRIPPERS
(L/H) (METER )
200 250 300 400 600
2.00 0.2 002897
2.00 0.3 002948 002950 003000 003001 003003
2.00 0.4
Missing catalog numbers available upon request.

Blank dripperline, without drippers inside, 300 meter coil: 18500-000970

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE COIL WEIGHT COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS CONTAINER CONTAINER
(MM) (M) (M) (KG) (UNITS) (M)

0.80 200 0.20 to 0.40 3.5 1440 288000

0.80 250 0.20 to 0.40 4.3 1440 360000
0.80 300 0.20 to 0.40 5.2 1440 432000
0.80 400 0.20 to 0.40 6.9 640 256000
0.80 600 0.20 to 0.40 10.4 640 384000

Microdrip 113
PC DRIPPER
ON-LINE PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING DRIPPER

APPLICATIONS
■ Greenhouses, nurseries, citrus.
■ Orchards, deciduous and tree irrigation.

SPECIFICATIONS
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/
silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurboNet™ labyrinth with large water passage.
■ To be “inserted” into thick-walled pipes (0.90, 1.00, 1.20 mm)
■ Injected dripper, very low CV.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ PC on-line drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ PC-LCNL & PC-HCNL with Anti-drain (LCNL & HCNL): Eliminates drainage and refill effect, and improves efficiency in pulse
irrigation.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a
cycle, ensuring uninterrupted dripper operation.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ Dripper can be positioned exactly where required.
■ Number of drippers can be increased so as to increase water quantity supply aimed at meeting tree growth rate requirement.
■ Allows the installation of “spider assembly”, splitting the drip supply into a number of drip outlets.

114
DRIPPERS TECHNICAL DATA
PC drippers
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* BASE CODE CAP COLOR
RANGE WIDTH-DEPTH-LENGTH COLOR CODE
(L/H) (BAR) (MM) (MM²) K X

2.0 0.5 – 4.0 1.17 x 1.07 x 61 2.0 2.0 0 Red Black

4.0 0.5 – 4.0 1.32 x 1.44 x 60 2.0 4.0 0 Black Black
8.5 0.5 – 4.0 1.60 x 1.60 x 17 2.0 8.5 0 Green Black
*Within working pressure range

PC-LCNL drippers
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* SHUT OFF BASE CAP
RANGE WIDTH-DEPTH-LENGTH PRESSURE CODE COLOR
(L/H) (BAR) (MM) (MM²) K X (BAR) COLOR CODE

2.0 1.0 – 4.0 1.17 x 1.07 x 61 2.0 2.0 0 0.15 Red Brown
4.0 1.0 – 4.0 1.32 x 1.44 x 60 2.0 4.0 0 0.15 Black Brown
8.5 1.0 – 4.0 1.60 x 1.60 x 17 2.0 8.5 0 0.15 Green Brown
* Within working pressure range

PC-HCNL drippers
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* SHUT OFF BASE CAP
RANGE WIDTH-DEPTH-LENGTH PRESSURE CODE COLOR
(L/H) (BAR) (MM) (MM²) K X (BAR) COLOR CODE

3.0 1.4 – 4.0 1.17 x 1.07 x 61 2.0 3.0 0 0.30 Black Black
6.0 1.4 – 4.0 1.32 x 1.44 x 60 2.0 6.0 0 0.30 Black Black
12.0 1.4 – 4.0 1.60 x 1.60 x 17 2.0 12.0 0 0.30 Black Black
* Within working pressure range

PC DRIPPER FLAT MODEL PC DRIPPER NIPPLE MODEL

PC D r i p p e r 115
PC DRIPPER FLAT MODEL
Catalog number 21000 - (any of below 6 digits)
FLOW RATE (L/H) 1 UNIT 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 500 UNITS/BAG 1000 UNITS/BAG 2500 UNITS/CARTON

2.0 001000 001020 001030 001033 001035 001040 001051

4.0 001100 001120 001130 001133 001135 001140 001151
8.5 001200 001220 001230 001233 001235 001240 001246
Missing catalog numbers available upon request

PC DRIPPER NIPPLE MODEL

Catalog number 21020 - (any of below 6 digits)
FLOW RATE (L/H) 1 UNIT 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 500 UNITS/BAG 1000 UNITS/BAG 2500 UNITS/CARTON

2.0 001000 001020 001030 001033 001035 001040 001051

4.0 001100 001110 001120 001130 001133 001135 001141 001149
8.5 001200 001210 001220 001230 001235 001232 001240 001251

Missing catalog numbers available upon request

PC DRIPPER NIPPLE MODEL

Catalog number 21000 - (any of below 6 digits)
FLOW RATE (L/H) 1 UNIT 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 500 UNITS/BAG 1000 UNITS/BAG 2300 UNITS/CARTON

25.0 001400 001410 001420 001430 001440

25.0 + cap ass. 001300 001320 001330 001340 001350 001390 001360

Missing catalog numbers available upon request

PC - LCNL DRIPPER FLAT MODEL

Catalog number 21000 - (any of below 6 digits)
FLOW RATE (L/H) 1 UNIT 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 500 UNITS/BAG 1000 UNITS/CARTON 2500 UNITS/CARTON

2.0 001500 001510 001520 001530 001540

4.0 001600 001610 001620 001630 001640
8.5 001700 001710 001720 001730 001740 001750

Missing catalog numbers available upon request

PC - LCNL DRIPPER NIPPLE MODEL

Catalog number 21020 - (any of below 6 digits)
FLOW RATE (L/H) 1 UNIT 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 500 UNITS/BAG 1000 UNITS/CARTON 2500 UNITS/CARTON

2.0 001300 001315 001320 001330 001333 001335 001341 001061

4.0 001400 001410 001420 001430 001433 001435 001441 001156
8.5 001500 001510 001520 001530 001533 001535 001545 001201

PC - HCNL DRIPPER NIPPLE MODEL

Catalog number 21060 - (any of below 6 digits)
FLOW RATE (L/H) 1 UNIT 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 500 UNITS/BAG 1000 UNITS/CARTON 2500 UNITS/CARTON

3.0 001000 001020 001022 001030 001040

6.0 001200 001210 001220 001240
12.0 001300 001320 001330 001335 001340

Missing catalog numbers available upon request

PACKAGE DATA
QUANTITY P/BOX BOX DIMENSIONS BOX WEIGHT
UNITS (CM X CM X CM) (KG)

PC & PC-LCNL drippers , flat model 2500 57 x 28 x 27 18

PC , PC-LCNL & PC-HCNL drippers , nipple model 2500 57 x 28 x 27 19

116 PC Dri pper

PCJ DRIPPER
COMPACT ON-LINE PRESSURE-COMPENSATING,
CONTINUOUSLY SELF-CLEANING DRIPPER

APPLICATIONS
■ Greenhouses, nurseries, citrus.
■ Orchards, deciduous and tree irrigation.

SPECIFICATIONS
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ TurboNet™ labyrinth with large water passage.
■ To be “inserted” into thick-walled pipes (0.90, 1.00, 1.20 mm)
■ Injected dripper, very low CV.
■ 3 different outlets: nipple, barb to 3 mm ID and barb to 4 mm ID micro-tube.
■ UV resistant. Resistant to standard nutrients used in agricultural.
■ PCJ on-line drippers meet ISO 9261 Standards with production certified by the Israel Standards Institute (SII).

FEATURES AND BENEFITS

■ Pressure compensated: Precise and equal amounts of water are delivered over a broad pressure range.
100% uniformity of water and nutrient distribution along the laterals.
■ PCJ-LCNL & PCJ-HCNL with Anti-drain (LCNL & HCNL): Eliminates drainage and refill effect, and improves efficiency in
pulse irrigation.
■ Continuously self flushing: Flushes debris as it is detected, throughout operation, not just at the beginning or end of a
cycle, ensuring uninterrupted dripper operation.
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
Widest water passages within the dripper.
■ Dripper can be positioned exactly where required.
■ Number of drippers can be increased so as to increase water quantity supply aimed at meeting tree growth rate requirement.
■ Allows the installation of “spider assembly”, splitting the drip supply into a number of drip outlets.

118
DRIPPERS TECHNICAL DATA
PCJ drippers
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* BASE CODE CAP COLOR
RANGE WIDTH-DEPTH-LENGTH COLOR CODE
(L/H) (BAR) (MM) (MM²) K X

0.5 0.5 – 4.0 0.54 x 0.60 x 35 1.8 0.5 0 Mustard Black

1.2 0.5 – 4.0 0.67 x 0.77 x 35 2.0 1.2 0 Brown Black
2.0 0.5 – 4.0 0.98 x 0.79 x 35 2.0 2.0 0 Red Black
3.0 0.5 – 4.0 1.03 x 1.07 x 35 2.0 3.0 0 Blue Black
4.0 0.5 – 4.0 1.32 x 0.92 x 35 2.0 4.0 0 Gray Black
8.0 0.5 – 4.0 1.60 x 1.08 x 35 2.0 8.0 0 Green Black
12.0 0.5 – 4.0 1.60 x 1.08 x 17 2.0 12.0 0 Fuchsia Black
15.0 0.5 – 4.0 1.60 x 1.08 x 17 2.0 15.0 0 Black Black
*Within working pressure range

PCJ-LCNL drippers
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* SHUT OFF BASE CODE CAP
RANGE WIDTH-DEPTH-LENGTH PRESSURE COLOR** COLOR
(L/H) (BAR) (MM) (MM²) K X (BAR) CODE

0.5 0.7 – 4.0 0.54 x 0.60 x 35 1.8 0.5 0 0.12 Mustard Black
1.2 0.7 – 4.0 0.67 x 0.77 x 35 2.0 1.2 0 0.12 Brown Black
2.0 0.7 – 4.0 0.98 x 0.79 x 35 2.0 2.0 0 0.12 Red Black
3.0 0.7 – 4.0 1.03 x 1.07 x 35 2.0 3.0 0 0.12 Blue Black
4.0 0.7 – 4.0 1.32 x 0.92 x 35 2.0 4.0 0 0.12 Gray Black
8.0 0.7 – 4.0 1.60 x 1.08 x 35 2.0 8.0 0 0.12 Green Black
12.0 0.7 – 4.0 1.60 x 1.08 x 17 2.0 12.0 0 0.12 Fuchsia Black
15.0 0.7 – 4.0 1.60 x 1.08 x 17 2.0 15.0 0 0.12 Black Black
*Within working pressure range **PCJ-LCNL is distinguished by the rings around the barb water inlet connector

PCJ-HCNL drippers
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT* SHUT OFF BASE CODE CAP
RANGE WIDTH-DEPTH-LENGTH PRESSURE COLOR COLOR
(L/H) (BAR) (MM) (MM²) K X (BAR) CODE

0.5 1.5 – 4.0 0.54 x 0.60 x 35 1.8 0.5 0 0.18 Light yellow Black
1.2 1.5 – 4.0 0.67 x 0.77 x 35 2.0 1.2 0 0.18 Light brown Black
2.0 1.5 – 4.0 0.98 x 0.79 x 35 2.0 2.0 0 0.18 Pink Black
3.0 1.5 – 4.0 1.03 x 1.07 x 35 2.0 3.0 0 0.18 Light blue Black
4.0 1.5 – 4.0 1.32 x 0.92 x 35 2.0 4.0 0 0.18 Light gray Black
*Within working pressure range

PCJ DRIPPER NIPPLE MODEL PCJ DRIPPER 4 MM BARB MODEL PCJ DRIPPER 3 MM BARB MODEL

PC J D r i p p e r 119
PCJ DRIPPER 3 MM BARB OUTLET
Catalog number 21500 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 500 UNITS/BAG 1000 UNITS/BAG 13000 UNITS/BOX

0.5 000700 000710 000730 000740

1.2 000800 000805 000815 000840
2.0 001000 001005 001010 001020 001030 001035 001040 001041
3.0 001150 001152 001155 001159
4.0 001200 001205 001210 001220 001230 001233 001235 001240
8.0 001400 001405 001410 001420 001430 001440 001450
12.0 001470 001475 001480 001495
15.0 003010 003030
Missing catalog numbers available upon request

PCJ DRIPPER - WITH AI (ANTI-INSECTS) ASSEMBLY CAP

Catalog number 21500 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT

2.0 004300
3.0 004310
4.0 004320
PCJ DRIPPER WITH
8.0 004330
AI ASSEMBLY CAP

PCJ DRIPPER 4 MM BARB OUTLET

Catalog number 21500 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 500 UNITS/BAG 1000 UNITS/BAG 12000 UNITS/BOX

0.5 001580 001585

1.2 001600
2.0 001700
3.0 001900
4.0 002100
8.0 002300
12.0 002400 002440
15.0 003020 003040
Missing catalog numbers available upon request

PCJ DRIPPER NIPPLE OUTLET

Catalog number 21500 - (any of below 6 digits)
100 UNITS/ 250 UNITS/ 500 UNITS/
FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 1000 UNITS/BAG 12000 UNITS/BOX
BAG BAG BAG

0.5 001042 001045 001046

1.2 001050 001057 001060 001090
2.0 001100 001110 001112 001115 001130 001140 001145
3.0 001160 001190
4.0 001300 001310 001315 001320 001330 001340
8.0 001500 001510 001520 001530 001535 001540
12.0 001560 001561 001562 001565 001575
15.0 003400 003450
Missing catalog numbers available upon request

120 PC J D ri pper
PCJ-LCNL DRIPPER 3 MM BARB OUTLET
Catalog number 21520 - (any of below 6 digits)
100 UNITS/ 250 UNITS/ 500 UNITS/
FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 1000 UNITS/BAG 13000 UNITS/BOX
BAG BAG BAG

0.5 000810 000820 000840

1.2 000900 000910 000920 000930 000940 000950
2.0 001000 001015 001020 001030 001040 001050 001051
3.0 001200 001210 001220 001230 001240 001250
4.0 001400 001410 001420 001430 001440 001445 001450 001460
8.0 001600 001610 001620 001630 001640 001650 001660
12.0 001670 001680 001685 001687 001690 001695 001698
Missing catalog numbers available upon request

PCJ-LCNL DRIPPER 4 MM BARB OUTLET

Catalog number 21520 - (any of below 6 digits)
100 UNITS/ 250 UNITS/ 500 UNITS/
FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 1000 UNITS/BAG 12000 UNITS/BOX
BAG BAG BAG

0.5 002850
1.2 002900
2.0 003000 003020 003030 003040 003060 003070
3.0 003200
4.0 003400 003420 003430 003440 003460
8.0 003600 003620 003625 003630 003640 003660
12.0 003700

Missing catalog numbers available upon request

PCJ-LCNL DRIPPER NIPPLE OUTLET

Catalog number 21520 - (any of below 6 digits)
100 UNITS/ 250 UNITS/ 500 UNITS/
FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 1000 UNITS/BAG 12000 UNITS/BOX
BAG BAG BAG

0.5 001052
1.2 001060 001090
2.0 001100 001120 001130 001140 001150 001155
3.0 001300 001310 001320 001340
4.0 001500 001510 001520 001530 001540 001550 001560
8.0 001700 001710 001720 001730 001740 001750 001760
12.0 001770 001775 001780 001795
Missing catalog numbers available upon request

PC J D r i p p e r 121
PCJ-HCNL DRIPPER 3 MM BARB OUTLET
Catalog number 21520 - (any of below 6 digits)
100 UNITS/ 250 UNITS/ 500 UNITS/
FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 1000 UNITS/BAG 13000 UNITS/BOX
BAG BAG BAG

0.5 003870 003890

1.2 004100 004120 004130 004150
2.0 004400 004410 004440 004450
3.0 004700 004710 004740
4.0 005000 005010 005040

Missing catalog numbers available upon request

PCJ-HCNL DRIPPER 4 MM BARB OUTLET

Catalog number 21520 - (any of below 6 digits)
100 UNITS/ 250 UNITS/ 500 UNITS/
FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 1000 UNITS/BAG 12000 UNITS/BOX
BAG BAG BAG

0.5 003900
1.2 004220
2.0 004500
3.0 004800
4.0 005100

Missing catalog numbers available upon request

PCJ-HCNL DRIPPER NIPPLE OUTLET

Catalog number 21520 - (any of below 6 digits)
100 UNITS/ 250 UNITS/ 500 UNITS/
FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 1000 UNITS/BAG 12000 UNITS/BOX
BAG BAG BAG

0.5 003850
1.2 004000 004040
2.0 004300 004350
3.0 004600 004640
4.0 004900 004950

Missing catalog numbers available upon request

PACKAGE DATA
QUANTITY P/BOX BOX DIMENSIONS AVERAGE BOX WEIGHT (KG)
UNITS (CM X CM X CM)

PCJ drippers ( all the models) According to drippers model 57 x 28 x 27 14.0

122 PC J D ri pper
PCJ - HF ON-LINE BUBBLERS
ON-LINE COMPACT PRESSURE COMPENSATED BUBBLER

APPLICATIONS
Landscape, trees and fruit trees with large treetops.
SPECIFICATIONS
■ Working pressure: 1.0 to 4.0 bar (1.3 to 4.0 bar in the 40 l/h).
■ Large water passages.
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ 5 different flow rates.
■ 3 different outlets: nipple, barb to 3 mm ID and barb to 4 mm ID. micro-tube.
■ To be “inserted” into thick- walled pipes (0.90, 1.00, 1.20 mm).
■ Injected emitter, very low CV.
■ Injected silicon diaphragm.
FEATURES AND BENEFITS
■ Wide water passages, improves clogging resistance.
■ PC system, patented pressure differential system maintains uniform flow rate at different inlet working pressure
(in the recommended working pressure range), ensuring exact distribution of the water and nutrients.
■ Continuous self-flushing system, improves resistance to clogging.
■ Anti drain (CNL) system, optional model, eliminates drainage and refill effect, improves efficiency in pulse irrigation.
■ Number of emitters can be increased so as to increase water quantity supply aimed at meeting tree growth rate requirement.
■ Allows the installation of “spider assembly”, splitting the water supply to a number of outlets and/or PC spray stake units.

BUBBLER TECHNICAL DATA

PCJ-HF bubblers
FLOW RATE* WORKING FILTRATION AREA CONSTANT EXPONENT* BASIS CODE COLOR CAP COLOR CODE
PRESSURE RANGE
(L/H) (BAR) (MM²) K X
20 1.0 – 4.0 2.0 20 0 Orange Black
25 1.0 – 4.0 2.0 25 0 Orange Light brown
30 1.0 – 4.0 2.0 30 0 Orange Brown
35 1.0 – 4.0 2.0 35 0 Orange Light blue
40 1.3 – 4.0 2.0 40 0 Orange Blue
*Within working pressure range

PCJ-HF-CNL bubblers
FLOW RATE* WORKING FILTRATION AREA CONSTANT EXPONENT* SHUT OFF BASIS CODE CAP COLOR CODE
PRESSURE RANGE PRESSURE COLOR**
(L/H) (BAR) (MM²) K X (BAR)
20 1.0 – 4.0 2.0 20 0 0.12 Orange Black
25 1.0 – 4.0 2.0 25 0 0.12 Orange Light brown
30 1.0 – 4.0 2.0 30 0 0.12 Orange Brown
35 1.0 – 4.0 2.0 35 0 0.12 Orange Light blue
40 1.3 – 4.0 2.0 40 0 0.12 Orange Blue
*Within working pressure range **CNL bubblers is distinguished by the rings around the inlet barb connector

124
PCJ-HF BUBBLER - NIPPLE OUTLET PCJ-HF BUBBLER - 3MM BARB OUTLET
Catalog number 21620 - (any of below 6 digits) Catalog number 21620 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 100 UNITS/BAG FLOW RATE (L/H) 1 UNIT 100 UNITS/BAG

20.0 001250 20.0 001200 001220

25.0 001550 001560 25.0 001500
30.0 001750 001770 30.0 001700 001710
35.0 001950 001960 35.0 001900
40.0 002150 002170 40.0 002100

Missing catalog numbers available upon request Missing catalog numbers available upon request

PCJ-HF BUBBLER - 4MM BARB OUTLET

Catalog number 21620 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 100 UNITS/BAG

20.0 001350
25.0 001650
30.0 001850
35.0 002050
40.0 002250

Missing catalog numbers available upon request

PCJ-HF BUBBLER NIPPLE OUTLET + ASSEMBLY CAP

Catalog number 21620 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 50 UNITS/BAG 100 UNITS/BAG 500 UNITS/BAG 1000 UNITS/BAG

20.0 001300 001310 001315 001320 001340

25.0 001600 001610 001620 001640
30.0 001800 001810 001820 001840
35.0 002000 002010 002020 002040
40.0 002200 002210 002220

Missing catalog numbers available upon request

PCJ-HF-BUBBLER WITH ASSEMBLY CAP

FLOW RATE FLOW RATE FLOW RATE FLOW RATE FLOW RATE
20 (L/H) 25 (L/H) 30 (L/H) 35 (L/H) 40 (L/H)

PC J - H F O n - l i n e Bu b b le r s 125
PCJ-HF-CNL BUBBLER - NIPPLE OUTLET PCJ-HF-CNL BUBBLER - 3MM BARB OUTLET
Catalog number 21630 - (any of below 6 digits) Catalog number 21630 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 100 UNITS/BAG FLOW RATE (L/H) 1 UNIT 100 UNITS/BAG

20.0 002150 001260 20.0 001200 001220

25.0 001550 25.0 001500 001510
30.0 001750 001760 30.0 001700 001710
35.0 001950 35.0 001900 001920
40.0 002150 002160 40.0 002100 002130

Missing catalog numbers available upon request

PCJ-HF-CNL BUBBLER - 4MM BARB OUTLET

Catalog number 21630 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 100 UNITS/BAG

20.0 001350
25.0 001650
30.0 001850
35.0 002050
40.0 002250

Missing catalog numbers available upon request

PCJ-HF- CNL BUBBLER NIPPLE OUTLET + ASSEMBLY CAP

Catalog number 21630 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 50 UNITS/BAG 100 UNITS/BAG 500 UNITS/BAG 1000 UNITS/BAG

20.0 001270 001280 001300

25.0 001570 001580 001600
30.0 001860 001870 001880
35.0 002060 002080
40.0 002300 002310 002320

Missing catalog numbers available upon request

PACKAGE DATA
QUANTITY P/BOX BOX DIMENSIONS AVERAGE BOX WEIGHT
UNITS (CM X CM X CM) (KG)

PCJ-HF bubblers According to bubblers model 57 x 28 x 27 14.0

126 PC J - H F On-l i ne B ubbl ers

127
BUTTON & POT DRIPPER
ON-LINE DRIPPER

APPLICATIONS
■ Greenhouses, nurseries, garden pots.
SPECIFICATIONS
■ Maximal working pressure: 2.0 bar.
■ TurboNet™ labyrinth with large water passages.
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ 4 different flow rates.
■ The Button model to be inserted into a thick-walled pipe (0.90, 1.00, 1.20 mm).
■ The Pot model to be threaded into a 3*5 mm micro-tube.
■ Injected dripper, very low CV.
FEATURES AND BENEFITS
■ TurboNet™ labyrinth assures wide water passages, large deep and wide cross section improves clogging resistance.
■ Dripper can be positioned exactly where required.
■ Number of drippers can be increased to increase the water quantities applied aimed at meeting tree’s growth rate
requirements.
■ Allows the installation of “spider assembly”, splitting the drip supply to a number of drip outlets.

DRIPPERS TECHNICAL DATA

Button drippers
FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS CONSTANT EXPONENT BASIS CODE COLOR CAP COLOR CODE
PRESSURE WIDTH-DEPTH-LENGTH
(L/H) (BAR) (MM) K X
2.00 2.0 0.98 x 0.89 x 50 0.662 0.48 Red Black
3.00 2.0 1.05 x 0.95 x 50 0.993 0.48 Blue Black
4.00 2.0 1.27 x 1.20 x 50 1.325 0.48 Black Black
8.00 2.0 1.65 x 1.40 x 50 2.649 0.48 Green Black
*Flow rate at 1.0 bar pressure

Pot drippers
FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS CONSTANT EXPONENT BASIS CODE COLOR CAP COLOR CODE
PRESSURE WIDTH-DEPTH-LENGTH
(L/H) (BAR) (MM) K X
2.00 2.0 0.98 x 0.89 x 50 0.662 0.48 Red Black
4.00 2.0 1.27 x 1.20 x 50 1.325 0.48 Black Black
8.00 2.0 1.65 x 1.40 x 50 2.649 0.48 Green Black
*Flow rate at 1.0 bar pressure

128
BUTTON DRIPPER FLAT OUTLET
Catalog number 20000 - (any of below 6 digits)
FLOW RATE
1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 1000 UNITS/BAG 10000 UNITS/BOX
(L/H)

2.00 001100 001110 001115 001120 001140 001143 001145 001048

3.00 001150 001195
4.00 001200 001210 001215 001220 001230 001235 001240 001250
8.00 001300 001310 001315 001320 001330 001333 001335 001350
Missing catalog numbers available upon request

PACKAGE DATA

QUANTITY P/BOX BOX DIMENSIONS BOX WEIGHT

UNITS (CM X CM X CM( (KG)

Flat outlet 10000 57 x 28 x 27 12.7

BUTTON DRIPPER BARB OUTLET

Catalog number 20020 - (any of below 6 digits)
FLOW RATE
1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 1000 UNITS/BAG 9500 UNITS/BOX
(L/H)

2.00 001500 001510 001515 001520 001530 001535 001540 001545

3.00 001550 001570 001595
4.00 001600 001610 001615 001620 001630 001635 001640 001650
8.00 001700 001710 001715 001720 001730 001735 001740 001750
Missing catalog numbers available upon request

PACKAGE DATA

QUANTITY P/BOX BOX DIMENSIONS BOX WEIGHT

UNITS (CM X CM X CM) (KG)

Barb outlet 9500 57 x 28 x 27 12.4

BUTTON DRIPPER NIPPLE OUTLET

Catalog number 20020 - (any of below 6 digits)
FLOW RATE
1 UNIT 10 UNITS/BAG 25 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 1000 UNITS/BAG 9500 UNITS/BOX
(L/H)

2.00 001100 001110 001130 001140

3.00 001150
4.00 001200 001220 001230 001240
8.00 001300 001320 001330 001340
Missing catalog numbers available upon request

PACKAGE DATA

QUANTITY P/BOX BOX DIMENSIONS BOX WEIGHT

UNITS (CM X CM X CM) (KG)

Nipple outlet 8500 57 x 28 x 27 11.2

B u tt o n & Po t d r i p p e r 129
POT DRIPPER FLAT OUTLET
Catalog number 20500 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 20 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 1000 UNITS/BAG

2.00 001100 001110 001115 001120 001130 001140

4.00 001200 001210 001220 001230 001240
8.00 001300 001310 001320 001330 001340
Missing catalog numbers available upon request

PACKAGE DATA

QUANTITY P/BOX BOX DIMENSIONS BOX WEIGHT

UNITS (CM X CM X CM) (KG)

Flat outlet 10000 57 x 28 x 27 12.8

POT DRIPPER NIPPLE OUTLET

Catalog number 20520 - (any of below 6 digits)

FLOW RATE (L/H) 1 UNIT 10 UNITS/BAG 20 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 250 UNITS/BAG 1000 UNITS/BAG

2.00 001100 001110 001120 001130 001140

4.00 001200 001210 001220 001230 001240
8.00 001300 001310 001320 001330 001340
Missing catalog numbers available upon request

PACKAGE DATA

QUANTITY P/BOX BOX DIMENSIONS BOX WEIGHT

UNITS (CM X CM X CM) (KG)

Nipple outlet 8500 57 x 28 x 27 11.3

POT DRIPPER POT DRIPPER BUTTON DRIPPER BUTTON DRIPPER BUTTON DRIPPER
NIPPLE OUTLET FLAT OUTLET 3MM BARB OUTLET FLAT OUTLET NIPPLE OUTLET

130 B utton & Pot dri pper

ARROW DRIPPER

APPLICATIONS
■ Greenhouses, nurseries, garden pot irrigation.

SPECIFICATIONS
■ Maximal working pressure: 2.0 bar.
■ “Turbulent” labyrinth wide water passages for highest reliability and efficiency.
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter.
When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ 5 different models to meet growers’ requirements.
■ To be “inserted” into a 3*5 mm micro-tube.
■ Injected dripper, very low CV.

FEATURES AND BENEFITS

■ Allows placement of drippers exactly where necessary.
■ Allows maximum flexibility in greenhouse and nurseries (with soft PE micro- tubes).
■ Allows installation of other Netafim™ drippers to add compensated and anti-drain functionality.
■ Accessory to all on-line drippers for better and more accurate installation.
■ Adaptable to all on-line drippers via barb, manifold or adapter.

DRIPPERS TECHNICAL DATA

FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT
PRESSURE WIDTH-DEPTH-LENGTH
(L/H) (BAR) (MM) (MM²) K X

1.6 1.2 0.83 x 0.60 x 20 9.4 0.529 0.48

2.3 1.2 0.83 x 0.86 x 20 12.6 0.761 0.48
*Flow rate at 1.0 bar pressure **Arrow dripper at 1.6 l/h nominal flow rate, only available in the angle model.

132
ARROW DRIPPER MODEL
Catalog number 22000 - (any of below 6 digits)

MODEL 1 UNIT 20 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG 200 UNITS/BAG 1000 UNITS/BOX

Black 2.3 l/h angle 001300 001315 001317 001320 001325 001340
Gray 2.3 l/h angle 001420 001440 001450
Gray 1.6 l/h angle 001250
Black 2.3 l/h angle short 000900 000930 000920 000940
Gray 2.3 l/h angle short 001500 001550
Black 2.3 l/h straight 001000 001020 001030 001040
Black 2.3 l/h straight + splitter 001100 001120 001140
Gray 2.3 l/h straight + splitter 001160 001170 001180
Black 2.3 l/h straight + plug 001200 001210 001220 001230 001235 001240

Missing catalog numbers available upon request

PACKAGE DATA

QUANTITY P/BOX BOX DIMENSIONS BOX WEIGHT

MODEL
UNITS (CM X CM X CM) (KG)

Black 2.3 l/h angle 1250 57 x 28 x 27 4.0

Gray 2.3 l/h angle 1250 57 x 28 x 27 4.0
Gray 1.6 l/h angle 1250 57 x 28 x 27 4.0
Black 2.3 l/h angle short 3000 57 x 28 x 27 5.7
Gray 2.3 l/h angle short 3000 57 x 28 x 27 5.7
Black 2.3 l/h straight 4000 57 x 28 x 27 9.8
Black 2.3 l/h straight + splitter 4000 57 x 28 x 27 10.4
Gray 2.3 l/h straight + splitter 4000 57 x 28 x 27 10.4
Black 2.3 l/h straight + plug 8500 57 x 28 x 27 5.3

END LINE PRODUCT

STRAIGHT W/SPLITTER STRAIGHT ARROW STRAIGHT W/PLUG ANGLED SHORT ANGLED LONG
ARROW DRIPPER DRIPPER ARROW DRIPPER ARROW DRIPPER ARROW DRIPPER

A rr ow D r i p p e r 133
CAPINET™

APPLICATIONS
■ Greenhouses, nurseries and garden pots.

SPECIFICATIONS
■ Maximum working pressure: 2.0 bar.
■ “Turbulent” labyrinth with large water passages.
■ Recommended filtration: 130 micron / 120 mesh.
Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water.
Wherever sand exceeding 2 ppm exists in the water, a Hydrocyclone is to be installed before the main filter. When sand/
silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team’s instructions.
■ To be “inserted” in heavy duty wall pipes (1.00, 1.20 mm).
■ Injected dripper, very low CV.

FEATURES AND BENEFITS

■ Dripper can be positioned exactly where required.
■ Turbulent flow for highest reliability, efficiency and uniformity.
■ Great flexibility by using 2.5*3.6 mm microtube to the exact location required.
■ Special design stake enables stabilization of the CapiNet™ end on pots, beds and open fields.
Can hold the CapiNet™ straight up or at 45 degrees angle.
■ No need for connectors , to connect to the distribution line.

DRIPPERS TECHNICAL DATA

FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS CONSTANT EXPONENT
PRESSURE WIDTH-DEPTH-LENGTH
(L/H) (BAR) (MM) K X

1.95 2.0 0.76 x 0.70 x 21 0.630 0.49

2.75 2.0 0.76 x 0.70 x 11 0.890 0.49

*Flow rate at 1.0 bar pressure

134
CAPINET™
Catalog number 18700 - (any of below 6 digits)**

MODEL 20 CM LENGTH 40 CM LENGTH 60 CM LENGTH 80 CM LENGTH 100 CM LENGTH

1.95 l/h black 001600 001800 002000 002200 002500

1.95 l/h gray 003300 003500 003600

2.75 l/h black 013000 013200 013400

Missing catalog numbers available upon request
**Catalog number define a box with 3000 units

PACKAGE DATA

QUANTITY P/BOX BOX DIMENSIONS BOX WEIGHT

UNITS (CM X CM X CM) (KG)

3000 57 x 28 x 27 5.5

CapiNet™ 135
SPIDERS
PRE-ASSEMBLED COMPONENTS

APPLICATIONS
■ Greenhouses and nurseries irrigation.
■ Ornamental plants.

BENEFITS
■ All-in-one stand assembly reduce labor time and cost.
■ Innovative assembly technologies improve assembly efficiency and reduce costs.
■ Reliability, the products are installed under strict supervision of experts.
■ All Spiders components were designed and produced under the same quality standards identifying all the Netafim™
products.
■ Environmentally friendly, the Spiders tubes are made of softened PE not emitting the chemical agents normally used for
softening similar tubes made of other raw materials.

SPECIFICATIONS
■ Recommended working pressure must match the pressures specified for all Spiders components.
■ Wherever there is more than one irrigation point it is recommended to use the Spiders with Arrow drippers as an end
product in order unify the flow of each of the points.
■ Wherever the Spiders serves a single irrigation point, the Netafim™ spike can be used.
■ It is highly recommended not to design flows below 0.5 l/h per each irrigation point, namely, if a 2 l/h “mother” dripper is
used, no more than 4 irrigation points should be designed. If 1.2 l/h “mother” dripper is used, no more than 2 irrigation
points should be designed. This applies to all other flow models.
■ The other side of the sheet details descriptions and assembly method of the Spiders different models.

136
PRODUCT ASSEMBLY (SPIDERS)
Components available for your choice of assemblage

End line product Micro-tube Spiders start component Micro-tube End line product

A B C D E F
5

START PRODUCT END LINE PRODUCT

6
1 Flat mainfold x 4 outlets A Straight arrow dripper

2 Flat mainfold x 4 outlets w/nipple B Straight w/splitter arrow dripper

3 Flat mainfold x 2 outlets 7 C Straight w/plug arrow dripper

4 Flat mainfold elbow, one outlet D Angled short arrow dripper

5 Upright mainfold x 4 outlets E Angled long arrow dripper

8
6 Upright mainfold x 8 outlets F Spike

7 “T” 5 mm connector

8 Adapter to integral dripper 9

9 PCJ or any other on-line dripper

10 W/o start product MICRO-TUBE

SSPE micro-tube 3*5 mm, 80 cm lenght, black
SSPE micro-tube 3*5 mm, 40 cm lenght, gray
SSPE micro-tube 3*5 mm , 60 cm lenght, gray
SSPE micro-tube 3*5 mm, 80 cm lenght, gray
SPE micro-tube 3*5 mm, 40 cm lenght, black
SPE micro-tube 3*5 mm, 60 cm lenght, black
SPE micro-tube 3*5 mm, 80 cm lenght, black

*please, add any required lenght by writing

SPE = Soft Polyethylene
SSPE = Super Soft Polyethylene
The draws are non-uniformly scaled. They
are for illustration purposes only.

Sp i d e r s 137
EXAMPLES OF POPULAR ASSEMBLIES
FLAT MANIFOLD X 4 OUTLETS

CATALOG "SPIDER" START MICRO MICRO TUBE MICRO END LINE COMPONENT
NUMBER COMPONENT TUBE SIZE TUBE
MATERIAL LENGTH
(MM X MM) (M)

40200-001900 Flat manifold x 4 outlets SPE 3.2*5 0.60 4 x straight arrow dripper w/splitter 2.3 l/h

40200-001950 Flat manifold x 4 outlets SPE 3.2*5 0.70 4 x straight arrow dripper w/splitter 2.3 l/h

40200-002000 Flat manifold x 4 outlets SPE 3.2*5 0.80 4 x straight arrow dripper w/splitter 2.3 l/h

40200-005980 Flat manifold x 4 outlets SPE 3.2*5 0.25 4 x angled long arrow dripper 2.3 l/h

40200-005982 Flat manifold x 4 outlets SPE 3.2*5 0.35 4 x angled long arrow dripper 2.3 l/h

40200-005989 Flat manifold x 4 outlets SPE 3.2*5 0.30 4 x angled long arrow dripper 2.3 l/h

40200-005990 Flat manifold x 4 outlets SPE 3.2*5 0.40 4 x angled long arrow dripper 2.3 l/h

40200-005995 Flat manifold x 4 outlets SPE 3.2*5 0.50 4 x angled long arrow dripper 2.3 l/h

40200-006000 Flat manifold x 4 outlets SPE 3.2*5 0.60 4 x angled long arrow dripper 2.3 l/h

40200-006040 Flat manifold x 4 outlets SPE 3.2*5 0.60 4 x angled long arrow dripper 1.6 l/h(gray)

40200-006200 Flat manifold x 4 outlets SPE 3.2*5 0.70 4 x angled long arrow dripper 2.3 l/h

40200-006300 Flat manifold x 4 outlets SPE 3.2*5 0.75 4 x angled long arrow dripper 2.3 l/h

40200-006400 Flat manifold x 4 outlets SPE 3.2*5 0.8 4 x angled long arrow dripper 2.3 l/h

40200-006445 Flat manifold x 4 outlets SPE 3.2*5 1.00 4 x angled long arrow dripper 2.3 l/h

40200-006500 Flat manifold x 4 outlets SPE 3.2*5 1.20 4 x angled long arrow dripper 2.3 l/h

40200-008850 Flat manifold x 4 outlets SPE 3.2*5 0.20 4 x angled short arrow dripper 2.3 l/h

40200-008870 Flat manifold x 4 outlets SPE 3.2*5 0.25 4 x angled short arrow dripper 2.3 l/h

40200-008900 Flat manifold x 4 outlets SPE 3.2*5 0.30 4 x angled short arrow dripper 2.3 l/h

40200-009000 Flat manifold x 4 outlets SPE 3.2*5 0.40 4 x angled short arrow dripper 2.3 l/h

40200-009020 Flat manifold x 4 outlets SPE 3.2*5 0.60 4 x angled short arrow dripper 2.3 l/h

40200-009030 Flat manifold x 4 outlets SPE 3.2*5 0.70 4 x angled short arrow dripper 2.3 l/h

40200-012150 Flat manifold x 4 outlets SSPE (gray) 3.2*5 0.46 4 x Angled short arrow dripper 2.3 l/h

40200-012200 Flat manifold x 4 outlets SSPE (gray) 3.2*5 0.76 4 x Angled long arrow dripper 2.3 l/h

40200-042520 Flat manifold x 4 outlets (gray) SPE (gray) 3.2*5 0.60 4 x angled long arrow dripper 1.6 l/h(gray)

40200-042540 Flat manifold x 4 outlets (gray) SPE (gray) 3.2*5 0.80 4 x angled long arrow dripper 1.6 l/h(gray)

40200-043100 Flat manifold x 4 outlets (gray) SPE (gray) 3.2*5 0.60 4 x angled long arrow dripper 2.3 l/h(gray)

40200-043110 Flat manifold x 4 outlets (gray) SPE (gray) 3.2*5 0.80 4 x angled long arrow dripper 2.3 l/h(gray)

40200-043300 Flat manifold x 4 outlets (gray) SPE (gray) 3.2*5 0.40 4 x angled short arrow dripper 2.3 l/h(gray)

138 Spi ders

FLAT MANIFOLD X 2 OUTLETS
CATALOG "SPIDER" START MICRO TUBE MICRO MICRO END LINE COMPONENT
NUMBER COMPONENT MATERIAL TUBE SIZE TUBE
LENGTH
(MM X MM) (M)

40200-006560 Flat manifold x 2 outlets SPE 3.2*5 0.30 2 x angled long arrow dripper 2.3 l/h

40200-006570 Flat manifold x 2 outlets SPE 3.2*5 0.40 2 x angled long arrow dripper 2.3 l/h

40200-006580 Flat manifold x 2 outlets SPE 3.2*5 0.50 2 x angled long arrow dripper 2.3 l/h

40200-006600 Flat manifold x 2 outlets SPE 3.2*5 0.60 2 x angled long arrow dripper 2.3 l/h

40200-006602 Flat manifold x 2 outlets SPE 3.2*5 0.60 2 x angled long arrow dripper 1.6 l/h (gray)

40200-006800 Flat manifold x 2 outlets SPE 3.2*5 0.70 2 x angled long arrow dripper 2.3 l/h

40200-007000 Flat manifold x 2 outlets SPE 3.2*5 0.8 2 x angled long arrow dripper 2.3 l/h

40200-007030 Flat manifold x 2 outlets SPE 3.2*5 1.00 2 x angled long arrow dripper 2.3 l/h

40200-008470 Flat manifold x 2 outlets SPE 3.2*5 0.50 2 x angled short arrow dripper 2.3 l/h

40200-008490 Flat manifold x 2 outlets SPE 3.2*5 0.90 2 x angled short arrow dripper 2.3 l/h

40200-042420 Flat manifold x 2 outlets (gray) SSPE (gray) 3.2*5 0.60 2 x angled long arrow dripper 1.6 l/h (gray)

40200-043000 Flat manifold x 2 outlets (gray) SPE (gray) 3.2*5 0.60 2 x angled long arrow dripper 2.3 l/h (gray)

40200-043020 Flat manifold x 2 outlets (gray) SPE (gray) 3.2*5 0.80 2 x angled long arrow dripper 2.3 l/h (gray)

UPRIGHT MANIFOLD X 4 OUTLETS

CATALOG "SPIDER" START MICRO TUBE MICRO MICRO END LINE COMPONENT
NUMBER COMPONENT MATERIAL TUBE SIZE TUBE
LENGTH
(MM X MM) (M)

40200-001900 Upright manifold x 4 outlets SPE 3.2*5 0.60 4 x straight arrow dripper w/splitter 2.3 l/h

40200-001920 Upright manifold x 4 outlets SPE 3.2*5 0.65 4 x straight arrow dripper w/splitter 2.3 l/h

40200-005982 Upright manifold x 4 outlets SPE 3.2*5 0.35 4 x angled long arrow dripper 2.3 l/h

40200-005990 Upright manifold x 4 outlets SPE 3.2*5 0.40 4 x angled long arrow dripper 2.3 l/h

40200-005995 Upright manifold x 4 outlets SPE 3.2*5 0.50 4 x angled long arrow dripper 2.3 l/h

40200-006300 Upright manifold x 4 outlets SPE 3.2*5 0.75 4 x angled long arrow dripper 2.3 l/h

Sp i d e r s 139
PC & PCJ DRIPPERS
CATALOG "SPIDER" START MICRO MICRO TUBE MICRO END LINE
NUMBER COMPONENT TUBE SIZE TUBE COMPONENT
MATERIAL LENGTH
(MM X MM) (M)

40200-000965 PC HCNL 3 l/h , nipple + adaptor to fit 3*5 tube SPE 3.2*5 0.80 Spike

40200-043200 PC LCNL 2 l/h nipple outlet + elbow adapter SSPE (gray) 3.2*5 0.60 Spike (gray)

40200-005182 PC LCNL 2 l/h , nipple + adaptor to fit 3*5 tube SPE 3.2*5 0.30 Spike

40200-005183 PC LCNL 2 l/h , nipple + brown adaptor to fit 3*5 tube SPE 3.2*5 0.30 Spike

40200-005187 PC LCNL 2 l/h , nipple + brown adaptor to fit 3*5 tube SPE 3.2*5 0.80 Spike

40200-004650 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.65 Plastic weight

40200-004700 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.30 Spike

40200-004750 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.40 Spike

40200-004755 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.60 -

40200-004757 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.80 -

40200-004758 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE (gray) 3.2*5 0.80 -

40200-004800 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.45 Spike

40200-004900 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.50 Spike

40200-005000 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.60 Spike

40200-005100 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.70 Spike

40200-005200 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.80 Spike

40200-005220 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 1.00 Spike

40200-013000 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE 3.2*5 0.76 Spike

40200-013010 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE (gray) 3.2*5 0.76 Spike

40200-013015 PCJ LCNL 2 l/h , 3 mm.barbed outlet SSPE (gray) 3.2*5 0.90 Spike

40200-013016 PCJ LCNL 2 l/h , 3 mm.barbed outlet SSPE 3.2*5 0.90 Spike

40200-045000 PCJ LCNL 2 l/h , 3 mm.barbed outlet SPE (gray) 3.2*5 0.60 Spike (gray)

40200-005265 PCJ LCNL 2 l/h niple outlet + Flat manifold x 2 outlets SPE 3.2*5 0.70 Spike

40200-005390 PCJ LCNL 4 l/h , 3 mm.barbed outlet SPE 3.2*5 0.40 Spike

40200-005400 PCJ LCNL 4 l/h , 3 mm.barbed outlet SPE 3.2*5 0.45 Spike

40200-005500 PCJ LCNL 4 l/h , 3 mm.barbed outlet SPE 3.2*5 0.50 Spike

40200-005600 PCJ LCNL 4 l/h , 3 mm.barbed outlet SPE 3.2*5 0.60 Spike

40200-005700 PCJ LCNL 4 l/h , 3 mm.barbed outlet SPE 3.2*5 0.70 Spike

140 Spi ders

PC & PCJ DRIPPERS
CATALOG "SPIDER" START MICRO MICRO TUBE MICRO END LINE
NUMBER COMPONENT TUBE SIZE TUBE COMPONENT
MATERIAL LENGTH
(MM X MM) (M)

40200-005800 PCJ LCNL 4 l/h , 3 mm.barbed outlet SPE 3.2*5 0.80 Spike

40200-013012 PCJ LCNL 4 l/h , 3 mm.barbed outlet SSPE 3.2*5 0.60 Spike

40200-005850 PCJ LCNL 8 l/h , 3 mm.barbed outlet SPE 3.2*5 0.60 Spike

40200-004760 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.50 -

40200-005275 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.40 Spike

40200-005275 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.40 Spike

40200-005280 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.45 Spike

40200-005285 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.50 Spike

40200-005287 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.55 Spike

40200-005290 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.60 Spike

40200-005300 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.70 Spike

40200-005320 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.80 Spike

40200-005341 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE 3.2*5 0.85 Spike

40200-013020 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE (gray) 3.2*5 0.76 Spike

40200-045500 PCJ LCNL 3 l/h, 3 mm. barbed outlet SPE (gray) 3.2*5 0.70 Spike (gray)

Sp i d e r s 141
ASSEMBLED DRIPPERLINES
PRE-ASSEMBLED COMPONENTS

APPLICATIONS
■ Greenhouses and nurseries irrigation.
■ Ornamental plants.

BENEFITS
■ All-in-one stand assembly reduce labor time and cost.
■ Innovative assembly technologies improve assembly efficiency and reduce costs.
■ Reliability, the products are installed under strict supervision of experts.
■ All Spiders’ components were designed and produced under the same quality standards identifying all the Netafim™
products.
■ Environmentally friendly, the Spider’s tubes are made of softened PE not emitting the chemical agents normally used for
softening similar tubes made of other raw materials.

SPECIFICATIONS
■ Recommended working pressure must match that of the products assembled on the sub main pipes and consider pipe
diameter and head losses.
■ The other side of the sheet details definitions and assembly method of the different products.

4m

0.50 m 0.50 m

2m 4m 2m

2m 2m

0.25 m 0.50 m 0.25 m 0.50 m 0.25 m 0.50 m 0.25 m

0.50 m 0.50 m

142
FLOWCHART TO DETERMINE THE DESIRED PRODUCT DEFINITION

DA PIPE EMITTER CLUSTER DISTANCE BETWEEN TOTAL COIL INITIAL AND

DESCRIPTION CLUSTERS LENGTH END LENGHT

12/2.5 PC2.0 1 0.20M 50M ID0.50M

12/4 PC4.0 2*0.15M 0.30M 100M ID0.75M
16/2.5 PC8.5 2*0.20M 0.40M 150M ID1.00M
16/4 PCLCNL2.0 2*0.30M 0.50M 200M ID1.25M
20/2.5 PCLCNL4.0 2*0.40M 1.00M 400M ID1.50M
20/4 PCLCNL8.5 2*0.50M 1.20M ID1.75M
25/2.5 PCJ0.5 1.50M ID2.00M
25/4 PCJ1.2 ID2.25M
12/2.5G PCJ2.0 IDX.XXM
12/4G PCJ3.0
16/2.5G PCJ4.0
16/4G PCJ8.0
20/2.5G PCJ12.0
20/4G PCJLCNL0.5
25/2.5G PCJLCNL1.2
25/4G PCJLCNL2.0
PCJLCNL3.0
PCJLCNL4.0
PCJLCNL8.0
PCJLCNL12.0
ZZZZZZ

Pipe description:
Outside diameter/class, the letter G denote a light gray color, if these do not appear it will be a black pipe.

Emitter:
Can be a single dripper or an assembled “Spider”, in which case it will be required to add the last 6 digits of the “Spider”
Netafim™ catalog number.

Cluster:
One single dripper or “Spider” on a group of two emitters with specific distance between them.

Distance between clusters:

The required distance between the centers of one cluster to the center of the next cluster.

Total coil length:

The required length per each coil (including initial and end length).

Initial and end length:

The required distance between the start of the pipe to the first emitter punched on it, must be identical to the distance
between the last emitter punched and the end of that pipe.

As s e m b l e d d r i p p e r lin e s 143
NETAFIM™ BLANK DRIPPERLINES
DRIPPERLESS DRIPPERLINES (WITHOUT DRIPPERS INSIDE)

APPLICATIONS
For use in agricultural drip, micro-sprinkler, landscape and mining irrigation systems.
SPECIFICATIONS
■ PE pipes (100% PE, totally recyclable).
■ Inside diameters and wall thicknesses according to the Netafim™ dripperline product basket can be used as a risers,
connectors or distribution pipes.
■ Can be used as distribution pipes for micro-sprinkler irrigation systems.
FEATURES AND BENEFITS
■ All pipes are manufactured with UV and oxidation protection making them durable to solar radiation without significant
damage for at least 50 years.
■ Microorganisms or fungi do not attack PE pipes, either internally or externally.
■ PE pipes are resistant to saline water, acid or alkaline solutions (excluding highly concentrated solutions) and to most
substances employed in agricultural applications.
■ Available in standard coil lengths.
■ Made with the finest available low/medium density polyethylene resin, especially formulated to resist cracking and
kinking, and to ensure long-term reliability.
■ Precision manufacturing to ensure the uniformity of internal diameter and wall thickness.

144
BLANK DRIPPERLINES (COLORED BLACK)
Catalog number 19950 - (any of below 6 digits)

MODEL 100 (M) 200 (M) 300 (M) 400 (M)

12010 000830 000945 000840

16010 001400 001410 001415 001420
16012 001000 001100 001200
17012 004600 004700 004800 004900
20010 008500 008600 008700 N/A
20012 008150 008300 008400 N/A
23009 009500
23010 009520 N/A

Missing catalog numbers available upon request

BLANK DRIPPERLINES (COLORED BROWN)

Catalog number 19950 - (any of below 6 digits)

MODEL 25 (M) 50 (M) 100 (M) 200 (M) 500 (M)

16010 003200 003300 003400 003500 003600

16012 002700 002720 002740
17012 006700 006800 006900

Missing catalog numbers available upon request

BLANK DRIPPERLINES (COLORED DARK BROWN)

Catalog number 19950 - (any of below 6 digits)

MODEL 25 (M) 50 (M) 100 (M)

12010 000910 000920 000930

16012 003100 003120

Missing catalog numbers available upon request

BLANK DRIPPERLINES (COLORED VIOLET)

Catalog number 19950 - (any of below 6 digits)

MODEL 200 M 300 (M) 400 (M)

16010 003970
17012 007500
20012 009300

Missing catalog numbers available upon request

BLANK DRIPPERLINES (COLORED LIGHT GRAY)

Catalog number 19950 - (any of below 6 digits)

MODEL 300 (M) 400 (M) 500 (M)

16010 003700
16012 001260 N/A
17012 004400 N/A
20012 009310 N/A N/A

Missing catalog numbers available upon request

N e t a f i m ™ b l a n k d r ip p e r lin e s 145
UNITECHLINE™ AS
PRESSURE-COMPENSATING, CONTINUOUSLY SELF CLEANING,
ANTI-SIPHON MECHANISM DRIPPER

APPLICATIONS
n Sub-surface and on-surface installation.
n Slopes.
n High wind areas.
n Areas subject to vandalism.
n Planting areas.
n Curved, narrow and unshaped planting areas.
n Turf, shrubs, trees and flowers.
n Rooftop gardens.
n Green walls.
n Sports turf, tennis courts and golf courses.
n High traffic/high liability areas.
n Raised planters.
SPECIFICATIONS
n Broadest choice of dripper flow rates: 1.0, 1.6, 2.3, 3.5 l/h.
n Dripper spacing’s: 0.3, 0.4, 0.5, 1.00 m (other dripper spacing available upon request).
n Pressure-compensating range: 0.5-4.0 bar.
n Anti-siphon mechanism.
n Recommended filtration: 130 micron / 120 mesh.
n Coil length: 50, 100, 200, 400 m.
FEATURES AND BENEFITS
PRESSURE COMPENSATING
n Precise and equal amounts of water are delivered over a broad pressure range.
n 100 % uniformity of water and nutrients distribution along the laterals.
CONTINUOUS SELF-FLUSHING DRIPPER DESIGN
n Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted
dripper operation.
n Anti-Siphon mechanism prevents contaminants from being drawn into the dripper.
UNIQUE DRIPPER DESIGN WITH
n Physical root barrier: better protection against root intrusion without reliance on chemicals.
n Largest filter in each dripper.
n Widest water passages within the dripper.
n Unique TurboNet™ flow path.
DRIPPER POSITION WITHIN THE DRIPPERLINE
n The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
FLEXIBLE TUBING
n Adapts to any planting area shape.
UV RESISTANT
n Withstands heat and direct sun - for on-surface installations.

146
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT * RECOMMENDED
RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM2) K X (MICRON)/(MESH)

1.0 0.5 – 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120

1.6 0.5 – 4.0 1.07 x 0.79 x 40 130 1.6 0 200/80
2.3 0.5 – 4.0 1.26 x 0.95 x 40 130 2.3 0 200/80
3.5 0.5 – 4.0 1.59 x 1.10 x 40 150 3.5 0 200/80
*Within working pressure range

UNITECHLINETM AS 16010
Catalog number: 14720 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0
1.6 002380 002100 002240 002340
2.3
3.5 004720
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16010 14.20 1.20 16.60 4.0 1.3

DRIPPERLINE PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 20 FEET TOTAL IN A 20 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 2.4 1440 72000 720 36000

100 4.6 960 96000 480 48000
16010 0.20 to 1.00
200 9.2 480 96000 240 48000
400 23.0 352 140800 176 70400

U n i Te ch l i n e ™ AS 147
UNITECHLINETM AS 16012
Catalog number: 14710 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0
1.6 003000 003600 003900 005300 003100 003700 004000 005400 003720 003200 003800 004100 005500
2.3 006000 006600 006900 008300 006100 006700 007000 008400 006200 006800 007100 008500
3.5 009590
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16012 14.20 1.20 16.60 4.0 1.3

DRIPPERLINE PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 20 FEET TOTAL IN A 20 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 2.9 1440 72000 720 36000

100 5.9 960 96000 480 48000
16012 0.20 to 1.00
200 11.7 480 96000 240 48000
400 23.5 352 140800 176 70400

UNITECHLINETM AS 17012
Catalog number: 14800- (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0
1.6 001850 002150 002300 003600 001900 003650 001950 002250 002400 003700
2.3 003850 003980 004050 004950 003900 004100 005000 003950 004000 004200 005100
3.5 006500
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

17012 14.60 1.20 17.00 4.0 1.1

DRIPPERLINE PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 20 FEET TOTAL IN A 20 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 3.2 1440 72000 720 36000

100 6.5 960 96000 480 48000
17012 0.20 to 1.00
200 12.5 480 96000 240 48000
400 24.9 352 140800 176 70400

148 U ni Techl i ne™ AS

TECHLINE™ CV
PRESSURE-COMPENSATING, CONTINUOUSLY SELF-CLEANING DRIPPER
CHECK VALVE ANTI-DRAIN (CV)

APPLICATIONS
n Sub-surface and on-surface installation.
n Slopes.
n High wind areas.
n Areas subject to vandalism.
n Planting areas.
n Curved, narrow and unshaped planting areas.
n Turf, shrubs, trees and flowers.
n Rooftop gardens.
n Green walls.
n Sports turf, tennis courts and golf courses.
n High traffic/high liability areas.
n Raised planters.
SPECIFICATIONS
n Broadest choice of dripper flow rates: 1.0, 1.6, 2.3, 3.5 l/h.
n Dripper spacing’s: 0.3, 0.4, 0.5, 1.00 m (other dripper spacing available upon request).
n Pressure-compensating range: 1.0-4.0 bar.
n Anti-drain mechanism, shut-off pressure 0.14 bar
n Anti-siphon mechanism.
n Recommended filtration: 130 micro / 120 mesh.
n Coil length: 50, 100, 200, 400 m.
FEATURES AND BENEFITS
PRESSURE COMPENSATING
n Precise and equal amounts of water are delivered over a broad pressure range.
n 100 % uniformity of water and nutrients distribution along the laterals.
CONTINUOUS SELF-FLUSHING DRIPPER DESIGN
n Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted
dripper operation.
0.14 BAR CHECK VALVE IN EACH DRIPPER
n All drippers turn on and off at the same time, maximizing balance of application. System holds back up to 1.4 m of water
(elevation change). No low emitter drainage, great on slopes. Delivers more precise watering.
ANTI-SIPHON MECHANISM
n Anti-Siphon mechanism prevents contaminants from being drawn into the dripper.
UNIQUE DRIPPER DESIGN WITH
n Physical root barrier: better protection against root intrusion without reliance on chemicals.
n Largest filter in each dripper.
n Widest water passages within the dripper.
n Unique TurboNet™ flow path.
DRIPPER POSITION WITHIN THE DRIPPERLINE
n The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
FLEXIBLE TUBING
n Adapts to any planting area shape.
UV RESISTANT
n Withstands heat and direct sun - for on-surface installations.

150
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT * RECOMMENDED
RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM2) K X (MICRON)/(MESH)

1.0 1.0 – 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120

1.6 1.0 – 4.0 1.07 x 0.79 x 40 130 1.6 0 200/80
2.3 1.0 – 4.0 1.26 x 0.95 x 40 130 2.3 0 200/80
3.5 1.0 – 4.0 1.59 x 1.10 x 40 150 3.5 0 200/80
*Within working pressure range

TECHLINE™ CV 16012
Catalog number: 14700 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0 002750 002760
1.6 002800 002850
2.3 006200 006250 006300
3.5
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16012 14.20 1.20 16.60 4.0 1.3

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 2.9 1440 72000 720 36000

100 5.9 960 96000 480 48000
16012 0.20 to 1.00
200 11.7 480 96000 240 48000
400 23.5 352 140800 176 70400

Te ch l i n e ™ C V 151
BIOLINE™ AS
PRESSURE-COMPENSATING, CONTINUOUSLY
SELF CLEANING, ANTI-SIPHON DRIPPER

APPLICATIONS
n For irrigation with non-potable water.
n Sub-surface installations.
n Commercial and residential applications.
n Turf/Lawn, shrubs, trees, flowerbeds.
SPECIFICATIONS
n Purple-colored dripperline warns of the use of non-potable water.
n Broadest choice of dripper flow rates: 1.0, 1.6, 2.3, 3.5 l/h.
n Dripper spacing’s: 0.3, 0.4, 0.5, 1.00 m (other dripper spacing available upon request).
n Pressure-compensating range: 0.5-4.0 bar.
n Anti-siphon mechanism.
n Recommended filtration: 130 micron / 120 mesh.
n Coil length: 50, 100, 200, 400 m.
FEATURES AND BENEFITS
PRESSURE COMPENSATING
n Precise and equal amounts of water are delivered over a broad pressure range.
n 100 % uniformity of water and nutrients distribution along the laterals.
CONTINUOUS SELF-FLUSHING DRIPPER DESIGN
n Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted
dripper operation.
ANTI-SIPHON MECHANISM
n Anti-Siphon mechanism prevents contaminants from being drawn into the dripper.
UNIQUE DRIPPER DESIGN WITH
n Physical root barrier: better protection against root intrusion without reliance on chemicals.
n Largest filter in each dripper.
n Widest water passages within the dripper.
n Unique TurboNet™ flow path.
DRIPPER POSITION WITHIN THE DRIPPERLINE
n The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
FLEXIBLE TUBING
n Adapts to any planting area shape.
UV RESISTANT
n Withstands heat and direct sun - for on-surface installations.
n Colored dripperline for easy identification when is needed to warns of the use of non-potable water

152
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT * RECOMMENDED
RANGE WIDTH-DEPTH-LENGTH FILTRATION
(L/H) (BAR) (MM) (MM²) K X (MICRON)/(MESH)

1.0 0.5 – 4.0 0.83 x 0.74 x 40 130 1.0 0 130/120

1.6 0.5 – 4.0 1.07 x 0.79 x 40 130 1.6 0 200/80
2.3 0.5 – 4.0 1.26 x 0.95 x 40 130 2.3 0 200/80
3.5 0.5 – 4.0 1.59 x 1.10 x 40 150 3.5 0 200/80
*Within working pressure range

BIOLINE™ AS 16010
Catalog number: 13960 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0 001500 002000
1.6 003000 002560 003000 002350 002490 002570 002580
2.3 003640 003645 004100 004200
3.5 005000 004300 004550
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16010 14.20 1.00 16.20 3.5 1.3

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 2.4 1440 72000 720 36000

100 4.6 960 96000 480 48000
16010 0.20 to 1.00
200 9.2 480 96000 240 48000
400 23.0 352 140800 176 70400

B i o l i n e ™ AS 153
BIOLINE™ AS 16012
Catalog number: 13930 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0 001300
1.6 002450 002500 002525 002750 003550
2.3 004500 004550
3.5 005000
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16012 14.20 1.20 16.60 4.0 1.3

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 2.9 1440 72000 720 36000

100 5.9 960 96000 480 48000
16012 0.20 to 1.00
200 11.7 480 96000 240 48000
400 23.5 352 140800 176 70400

BIOLINE™ AS 17012
Catalog number: 14090 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0
1.6 002900
2.3 004400 004500
3.5
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

17012 14.60 1.20 17.00 4.0 1.1

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 3.2 1440 72000 720 36000

100 6.5 960 96000 480 48000
17012 0.20 to 1.00
200 12.5 480 96000 240 48000
400 24.9 352 140800 176 70400

154 Bi ol i ne™ AS
TECHNET™
PRESSURE-COMPENSATING, CONTINUOUSLY SELF-CLEANING DRIPPER

APPLICATIONS
n On-surface installation.
n High wind areas.
n Planting areas.
n Curved, narrow and unshaped planting areas.
n Shrubs, trees, flowers.
n Rooftop gardens.
n High traffic/high liability areas.
n Raised planters.

SPECIFICATIONS
n Broadest choice of dripper flow rates: 1.0, 1.6, 2.0, 3.0 l/h.
n Dripper spacing’s: 0.3, 0.4, 0.5, 1.00 m (other dripper spacing available upon request).
n Pressure-compensating range: 0.4-3.0 bar.
n Recommended filtration: 130 micron / 120 mesh.
n Coil length: 50, 100, 200, 400/500 m.

FEATURES AND BENEFITS

PRESSURE COMPENSATING
n Precise and equal amounts of water are delivered over a broad pressure range.
n 100 % uniformity of water and nutrients distribution along the laterals.
CONTINUOUS SELF-FLUSHING DRIPPER DESIGN
n Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted
dripper operation.
UNIQUE DRIPPER DESIGN WITH
n Physical root barrier: better protection against root intrusion without reliance on chemicals.
n Large filter in each dripper.
n Widest water passages within the dripper.
n Unique TurboNet™ flow path.
DRIPPER POSITION WITHIN THE DRIPPERLINE
n The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
FLEXIBLE TUBING
n Adapts to any planting area shape.
UV RESISTANT
n Withstands heat and direct sun - for on-surface installations.

156
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING PRESSURE RANGE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT *
WIDTH-DEPTH-LENGTH
(L/H) (BAR) (MM) (MM2) K X

1.0 0.40 - 3.0 0.61 x 0.60 x 8 39 1.0 0

1.6 0.40 - 3.0 0.76 x 0.73 x 8 39 1.6 0
2.0 0.40 - 3.5 0.84 x 0.80 x 8 39 2.0 0
3.0 0.40 - 3.5 1.02 x 0.88 x 8 39 3.0 0
*Within working pressure range

TECHNET™ 16 120
Catalog number: 17710 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0 002200
1.6 003150 003480 003650 004780 003200 003500 003700 004800
2.0 006150 006500 006900 006170
3.0 008100
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16 120 14.20 1.20 16.60 4.0 0.72

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 40 FEET TOTAL IN A 40 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 2.7 1440 72000 720 36000

100 5.5 960 96000 480 48000
16 120 0.20 to 1.00
200 11.0 480 96000 240 48000
400 22.0 352 140800 176 70400

Te ch N e t ™ 157
TECHNET™ 16 100
Catalog number: 17680 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0 005000
1.6 006120 006580 006130 006350 006600 007300 006200 006410 006610 007310 006210 006450 006620 007340
2.0 007400 007420 007450 007600
3.0
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 500 500 500 500
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16 100 14.20 1.00 16.20 3.5 0.72

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 20 FEET TOTAL IN A 20 FEET
DRIPPERS WEIGHT CONTAINER (UNITS) CONTAINER CONTAINER (UNITS) CONTAINER
(METER) (METER) (KG) (METERS) (METERS)

50 3.2 1440 72000 720 36000

100 6.5 960 96000 480 48000
16 100 0.20 to 1.00
200 12.5 480 96000 240 48000
500 24.9 352 176000 176 88000

158 Tech N et™

TECHNET™ AS
PRESSURE COMPENSATING, CONTINUOUSLY SELF-CLEANING,
ANTI-SIPHON DRIPPER

APPLICATIONS
n On-surface installation or covered with a layer of mulch.
n Sub-surface installation.
n High wind areas.
n Planting areas.
n Curved, narrow and unshaped planting areas.
n Shrubs, trees, flowers.
n Rooftop gardens.
n High traffic/high liability areas.
n Raised planters.

SPECIFICATIONS
n Broadest choice of dripper flow rates: 1.0, 1.6, 2.0, 3.0 l/h.
n Dripper spacing’s: 0.3, 0.4, 0.5, 1.00 m (other dripper spacing available upon request).
n Pressure-compensating range: 0.4-3.0 bar.
n Anti-siphon mechanism.
n Recommended filtration: 130 micron / 120 mesh.
n Coil length: 50, 100, 200, 400/500 m.

FEATURES AND BENEFITS

PRESSURE COMPENSATING
n Precise and equal amounts of water are delivered over a broad pressure range.
n 100% uniformity of water and nutrients distribution along the laterals.
CONTINUOUS SELF-FLUSHING DRIPPER DESIGN
n Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted
dripper operation.
ANTI-SIPHON MECHANISM
n Anti-Siphon mechanism prevents contaminants from being drawn into the dripper.
UNIQUE DRIPPER DESIGN WITH
n Physical root barrier: better protection against root intrusion without reliance on chemicals.
n Large filter in each dripper.
n Widest water passages within the dripper.
n Unique TurboNet™ flow path.
DRIPPER POSITION WITHIN THE DRIPPERLINE
n The water is drawn in to the dripper from the stream center, preventing the entrance of sediments in to the drippers.
FLEXIBLE TUBING
n Adapts to any planting area shape.
UV RESISTANT
n Withstands heat and direct sun - for on-surface installations.

160
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING PRESSURE RANGE WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT *
WIDTH-DEPTH-LENGTH
(L/H) (BAR) (MM) (MM2) K X

1.0 0.40 - 3.0 0.61 x 0.60 x 8 42 1.0 0

1.6 0.40 - 3.0 0.76 x 0.73 x 8 42 1.6 0
2.0 0.40 - 3.5 0.84 x 0.80 x 8 42 2.0 0
3.0 0.40 - 3.5 1.02 x 0.88 x 8 42 3.0 0
*Within working pressure range

TECHNET™ AS 16 120
Catalog number: 17708 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0 001500
1.6
2.0 003650
3.0
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 400 400 400 400
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16 120 14.20 1.20 16.60 4.0 0.72

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 20 FEET TOTAL IN A 20 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 2.7 1440 72000 720 36000

100 5.5 960 96000 480 48000
16 120 0.20 to 1.00
200 11.0 480 96000 240 48000
400 22.0 352 140800 176 70400

Te ch N e t ™ AS 161
TECHNET™ AS 16 100
Catalog number: 17678 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00 0.30 0.40 0.50 1.00
1.0
1.6 004400 004700
2.0 006180 006100 006200 005950 006120 006220
3.0 007000
Bundled
coil length 50 50 50 50 100 100 100 100 200 200 200 200 500 500 500 500
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

16 100 14.20 1.00 16.20 3.5 0.72

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 20 FEET TOTAL IN A 20 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

50 3.2 1440 72000 720 36000

100 6.5 960 96000 480 48000
16 100 0.20 to 1.00
200 12.5 480 96000 240 48000
500 24.9 352 176000 176 88000

162 TechN e t™ AS
LANDLINE™ 12 AND 16
ON-SURFACE TURBUNEXT™ FLOW

APPLICATIONS
■ On-surface installation.
■ Shrubs, flower beds and vegetable gardens.
■ Under mulch.
■ For relative flat irrigation zones.
■ For narrow planting areas.

SPECIFICATIONS
■ Dripper flow rates: 1.0, 2.0, 3.0, 4.0 l/h (nominal flow rate at 1.0 bar pressure).
■ Maximum operation pressure: 3.5 bar.
■ Recommended filtration: 130 micron / 120 mesh.
■ Landline™ 12, ID = 10.2 mm.
■ Landline™ 16, ID = 14.2 mm.

FEATURES AND BENEFITS

■ Large, efficient TurbuNext™ flow path.
■ Easy installation.
■ Tubing flexibility adapts to any shape of planting area.
■ UV-resistant dripperline.
■ Long lasting reliability and durability.
■ Colored dark brown.

DRIPPERS TECHNICAL DATA

FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT
PRESSURE** WIDTH-DEPTH-LENGTH
(L/H) (BAR) (MM) (MM²) K X

1.00 4.0/3.5 0.60 x 0.74 x 65 45 0.347 0.46

1.50 4.0/3.5 0.71 x 0.85 x 65 48 0.468 0.46
2.00 4.0/3.5 0.76 x 1.03 x 65 51 0.693 0.46
3.00 4.0/3.5 0.90 x 1.20 x 65 51 1.040 0.46
4.00 4.0/3.5 0.94 x 1.28 x 33 51 1.387 0.46
*Flow rate at 1.0 bar pressure **According to dripperlines inside diameter

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD
(MM) (MM) (MM) (BAR)

Landline™ 12 10.30 1.00 12.30 3.5 0.7

Landline™ 16 14.20 1.00 16.20 3.5 0.4

164
LANDLINE™ 12 (DARK BROWN)
Catalog number 16060 - (any of bellow 6 digits)
FLOW RATE DISTANCE BETWEEN DRIPPER COIL LENGTH (M)
(L/H) (M)
25 50 100
0.20 006000 006050 006100
1.00
0.50 006450 006500 006550
0.30
2.00
0.50
0.30
3.00
0.50
0.30
4.00
0.50
Missing catalog numbers available upon request

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 20 FEET TOTAL IN A 20 FEET
DRIPPERS WEIGHT CONTAINER CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

25 1.0 3800 95000 1900 47500

Landline™
50 0.20 to 1.00 2.1 2800 140000 1400 70000
12
100 4.1 2000 200000 1000 100000

LANDLINE™ 16 (DARK BROWN)

Catalog number 16065 - (any of bellow 6 digits)
FLOW RATE DISTANCE BETWEEN DRIPPERS COIL LENGTH (M)
(L/H) (M)
25 50 100
0.30 002000 002050 002100
1.00
0.50 004000 004050 004100
0.30 004300 004305 004306
1.50
0.50 004320 004321 004322
0.30 005000 005050 005100
2.00
0.50 005300 005350 005360
0.30
3.00
0.50
0.30 006000 006050 006060
4.00
0.50 006200 006250 006260
Missing catalog numbers available upon request

DRIPPERLINES PACKAGE DATA

MODEL COIL LENGTH DISTANCE BETWEEN AVERAGE COIL COILS IN A 40 FEET TOTAL IN A 40 FEET COILS IN A 20 FEET TOTAL IN A 20 FEET
DRIPPERS WEIGHT CONTAINE CONTAINER CONTAINER CONTAINER
(METER) (METER) (KG) (UNITS) (METERS) (UNITS) (METERS)

25 1.2 1920 48000 960 24000

Landline™
50 0.20 to 1.00 2.3 1440 72000 720 36000
16
100 4.6 900 90000 450 45000

Landline™ 12 and 16 165

LANDLINE™ 8
ON-SURFACE TURBONET™ FLOW

APPLICATIONS
n On-surface installation.
n Shrubs, flower beds and vegetable gardens.
n Short laterals lenght.
n For flat irrigation zones.
n Narrow planting areas.

SPECIFICATIONS
n Dripper flow rate: 2.0 l/h (nominal flow rate at 1.0 bar pressure).
n Maximum operation pressure: 4.0 bar.
n Recommended filtration: 130 micron / 120 mesh.
n Use Landline™ 8 mm fittings.

FEATURES AND BENEFITS

n Large, efficient TurboNet™ flow path.
n Easy installation.
n Tubing flexibility adapts to any shape of planting area.
n UV-resistant dripperline.
n Long lasting reliability and durability.
n Colored brown or dark brown.

DRIPPERS TECHNICAL DATA

FLOW RATE* MAX. WORKING WATER PASSAGES DIMENSIONS FILTRATION AREA CONSTANT EXPONENT
PRESSURE WIDTH-DEPTH-LENGTH
(L/H) (BAR) (MM) (MM2) K X

2.0 4.0 0.63 x 0.73 x 22 22 0.647 0.49

*Nominal flow rate at 1.0 bar pressure

DRIPPERLINES TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING PRESSURE KD

(MM) (MM) (MM) (BAR)

Landline™ 8 6.30 0.80 7.90 4.0 2.0

166
LANDLINE™ 8
Catalog number 18500 - (any of bellow 6 digits)
FLOW RATE DISTANCE BETWEEN DRIPPER COIL LENGTH (M)
(L/H) (M)
30 50 100 200 300 600
0.15 002860 002862 002865 002867 002870
0.20 002880 002890 002895
2.00
0.30 002920 002919 002922 002923 002925 002927
0.50 002940 002945 002936
Missing catalog numbers available upon request

Blank tube , without drippers inside, 30 meter coil: 18500-001050

LANDLINE™ 8 (DARK BROWN)

Catalog number 18500 - (any of bellow 6 digits)
FLOW RATE DISTANCE BETWEEN DRIPPER COIL LENGTH (M)
(L/H) (M)
30 50 100
0.15 003719
0.20
2.00
0.30 003750 003760
0.50
Missing catalog numbers available upon request

DRIPPERLINES PACKAGE DATA

WALL THICKNESS COIL LENGTH DISTANCE BETWEEN AVERAGE COIL WEIGHT
DRIPPERS
(MM) (METER) (METER) (KG)

30 0.15 to 0.50 0.6

0.80 50 0.15 to 0.50 1.0
100 0.15 to 0.50 2.0

Landline™ 8 167
TECHFLOW™ JUNIOR
PRESSURE-COMPENSATING, CONTINUOUSLY SELF-CLEANING
ON-LINE DRIPPER

APPLICATIONS
n Slopes and high wind areas.
n Shrubs, trees irrigation.
n Curved, narrow and unshaped planting areas.
n Roof gardens.
n Planters, pots, baskets.

SPECIFICATIONS
n Flow rates: 2.0, 4.0, 8.0 l/h.
n Pressure compensating range: 0.7 to 4.0 bar.
n Anti-siphon mechanism.
n Optional, In-line model.
n Optional, model CNL: Anti-drain mechanism, shut-off pressure: 0.12 bar.
n Optional, model SP (self-piercing).
n Recommended filtration: 130 micron / 120 mesh.

FEATURES AND BENEFITS

PRESSURE COMPENSATING
n Precise and equal amounts of water are delivered over a broad pressure range.
n 100% uniformity of water and nutrients distribution along the laterals.
CONTINUOUS SELF-FLUSHING DRIPPER DESIGN
n Flushes debris as it is detected, throughout operation, not just at the beginning or end of a cycle, ensuring uninterrupted


dripper operation.
ANTI-SIPHON MECHANISM
n Anti-Siphon mechanism prevents contaminants from being drawn into the dripper.
OPTIONAL CNL MODEL, 0.12 BAR CHECK VALVE IN EACH DRIPPER
n All drippers turn on and off at the same time, maximizing balance of application. System holds back up to 1.2 m of water
(elevation change). No low emitter drainage, great on slopes. Delivers more precise watering.
IN-LINE MODEL
n Special model, fit 4 mm micro-tube as distribution tube. Dripper with dual barb, inlet and outlet for In-line installation.
PCJ SP (SELF-PIERCING) DRIPPER
n Requiring no pre punching when installed on pipes class 2.5 and 4.0.
n Number of drippers can be raised to increase water quantity supply and meet the tree’s growth rate requirements

168
DRIPPERS TECHNICAL DATA
FLOW RATE* WORKING PRESSURE WATER PASSAGES DIMENSIONS FILTRATION CONSTANT EXPONENT *
RANGE WIDTH-DEPTH-LENGTH AREA
(L/H) (BAR) (MM) (MM²) K X

2.0 0.7 - 4.0 0.98 x 0.79 x 35 2.0 2.0 0

4.0 0.7 - 4.0 1.32 x 0.92 x 35 2.0 4.0 0
8.0 0.7 - 4.0 1.60 x 1.08 x 35 2.0 8.0 0
*Within working pressure range

TECHFLOW™ JUNIOR DRIPPER - 3 MM BARB OUTLET

Catalog number 21520 - (any of bellow 6 digits)

FLOW RATE 1 UNIT 50 UNITS/BAG 100 UNITS/BAG

(L/H)

2.0 002100 002120 002130

4.0 002500 002520 002530
TECHFLOW™
8.0 002700 002720 JUNIOR
Missing catalog numbers available upon request

IN LINE TECHFLOW™ JUNIOR DRIPPER - 3 MM BARB OUTLET

Catalog number 21600 - (any of bellow 6 digits)
FLOW RATE 1 UNIT 10 UNITS/BAG 50 UNITS/BAG
(L/H)

1.2 002995
2.0 003100 003350 003600
4.0 003200 003400 003700 IN-LINE
TECHFLOW™
8.0 003200 003400 003700 JUNIOR

IN LINE TECHFLOW™ JUNIOR CNL DRIPPER - 3 MM BARB OUTLET

Catalog number 21600 - (any of bellow 6 digits)
FLOW RATE 1 UNIT 10 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG
(L/H)

0.5 001778
1.2 001780
2.0 001800 001810 001815 001820
3.0 001900 001920
4.0 002000 002010 002015 002020
8.0 002100 002110 002120

PCJ-SP (SELF-PIERCING) DRIPPER - 3 MM BARB OUTLET

Catalog number 21500 - (any of bellow 6 digits)
NOMINAL
FLOW RATE 1 UNIT 10 UNITS/BAG 50 UNITS/BAG 100 UNITS/BAG
(L/H)

2.0 004000 004030 004040 004050

4.0 004100 004130 004140 004150
8.0 004200 004220 004230 004250 FLOW RATE FLOW RATE FLOW RATE
2.0 (L/H) 4.0 (L/H) 8.0 (L/H)

Te ch f l ow ™ Ju n i o r 169
LEACH LINE A™
INTEGRAL DRIPPER

APPLICATIONS
n Heap Leaching for cooper, gold and silver mines.

SPECIFICATIONS
n Broadest choice of dripper flow rates: 1.0, 1.5, 2.0, 3.0, 4.0 l/h.
n Max. working pressure: 3.0 / 3.5 bar (according to dripperlines wall thickness).
n Recommended filtration: 130 micron / 120 mesh.

FEATURES AND BENEFITS

n Superior TurbuNext™ flow regime.
n Wide and deep flow path cross-section to minimize clogging and ensure exact flow rate in all working conditions.
n Large filtration area for optimal performance, even with suspended solids solutions.
n Internal emitter protected against mechanical damage.
n Injected molded drippers ensure high uniformity and very low CV.

DRIPPERS TECHNICAL DATA

FLOW RATE* MAXIMUM WORKING WATER PASSAGES DIMENSIONS FILTRATION CONSTANT EXPONENT
PRESSURE** WIDTH-DEPTH-LENGTH AREA
(L/H) (BAR) (MM) (MM²) K X

1.0 3.0 / 3.5 0.60 x 0.74 x 65 45 0.347 0.46

1.5 3.0 / 3.5 0.71 x 0.85 x 65 48 0.520 0.46
2.0 3.0 / 3.5 0.76 x 1.03 x 65 51 0.693 0.46
3.0 3.0 / 3.5 0.90 x 1.20 x 65 51 1.040 0.46
4.0 3.0 / 3.5 0.94 x 1.28 x 33 51 1.387 0.46
8.0 3.0 / 3.5 1.52 x 1.28 x 28 50 2.773 0.46
* Nominal flow rate at 1.0 bar pressure. **According to dripperline wall thickness.

170
LEACH LINE A™ 16009
Catalog number : 12315 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
1.00 000200
1.50
2.00 003000
3.00
4.00 005000
8.00
Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING MAX. FLUSHING KD
PRESSURE PRESSURE
(MM) (MM) (MM) (BAR) (BAR)

16009 14.20 0.90 16.00 3.0 3.9 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS LENGTH WEIGHT CONTAINER CONTAINER
(MM) (METER) (METER) (KG) (UNITS) (METERS)

16009 0.90 0.2 to 1.00 500 20.7 330 165000

*According to drippers spacing

LEACH LINE A™ 16010

Catalog number : 12308 - (any of bellow 6 digits)
FLOW DISTANCE BETWEEN DRIPPERS (M)
RATE
(L/H) 0.15 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.80 0.90 1.00
1.00
1.50 001846 001856
2.00 001990 002010 002050
3.00
4.00 005310 005320
8.00
Bundled
coil length 500 500 500 500 500 500 500 500 500 500 500 500 500 500
(meter)
Missing catalog numbers available upon request

DRIPPERLINE TECHNICAL DATA

MODEL INSIDE DIAMETER WALL THICKNESS OUTSIDE DIAMETER MAX. WORKING MAX. FLUSHING KD
PRESSURE PRESSURE
(MM) (MM) (MM) (BAR) (BAR)

16010 14.20 1.00 16.20 3.5 4.6 0.4

DRIPPERLINES PACKAGE DATA (ON BUNDLED COILS)

MODEL WALL DISTANCE BETWEEN COIL AVERAGE* COIL COILS IN A 40 FEET TOTAL IN A 40 FEET
THICKNESS DRIPPERS LENGTH WEIGHT CONTAINER CONTAINER
(MM) (METER) (METER) (KG) (UNITS) (METERS)

16010 1.00 0.2 to 1.00 500 23.0 330 165000

*According to drippers spacing

Le a ch L i n e A ™ 171
06-0117-SPR-CT-0071-EN

GROW MORE WITH LESS

WWW.NETAFIMCOM