EX-7 series

SPECIFICATIONS
K
E D&D'

L C
G

I H A
J B

Illustrations show Tier 4 Final type.

A Distance between tumblers 5 090 mm

B Undercarriage length 6 500 mm
C Counterweight clearance 1 820 mm
D Rear-end swing radius 4 900 mm
D’ Rear-end length 4 900 mm
E Overall width of upperstructure 5 410 mm
Backhoe 4 350 mm
F Overall height of cab
Loading shovel 5 440 mm
G Min. ground clearance 1 020 mm
H Track gauge 3 900 mm
I Track shoe width 700 mm 900 mm
J Undercarriage width 4 600 mm 4 800 mm
K Overall width 5 470 mm
L Track height 1 660 mm

HYDRAULIC EXCAVATOR
EX1200-7B (Tier 4 Final)
Engine Rated Power : 567 kW (770 PS)
Operating Weight : Loading Shovel : 118 000 kg
Backhoe : 117 000 kg
BE-front : 119 000 kg
EX1200-7 (FCO)
Engine Rated Power : 567 kW (770 PS)
Operating Weight : Loading Shovel : 117 000 kg
Backhoe : 115 000 kg
BE-front : 117 000 kg
Bucket Capacity Backhoe Bucket : (ISO 7546 Heaped 2:1) 5.2 - 7.0 m3
Loading Shovel Bucket : (ISO 7451 Heaped 1:1) 5.9 - 6.5 m3
 SPECIFICATIONS
EX1200-7
ENGINE Relief Valve Settings CONTROLS UPPERSTRUCTURE
Boom/arm/bucket
2 Implement Levers Revolving Frame
Model ����������������������������������� Cummins QSK23-C circuit ������������������������������������������������������������ 31.9 MPa (325 kgf/cm²) Remote-controlled joystick hydraulic servo system. Right lever is for A deep, full-reinforced box section. Heavy-gauge steel plates used for
Type ������������������������������������� Water-cooled, 4-cycle, 6-cylinder Travel circuit �������������������������������������������������� 34.3 MPa (350 kgf/cm²) boom and bucket control, left lever for swing and arm control. For loading ruggedness.
in line, turbo-charged direct injection Swing circuit �������������������������������������������������� 27.9 MPa (285 kgf/cm²) shovel, 2 pedals provided for opening/closing the bottom dump bucket.
chamber-type diesel engine, urea SCR Pilot circuit ���������������������������������������������������� 4.4 MPa ( 45 kgf/cm²) Deck Machinery
system. 2 Travel Levers with Pedals Maintenance accessibility is the major feature in the lay-out of deck
Emission Certification ����������� U.S.EPA Tier 4 Final Hydraulic Cylinders Remote-controlled hydraulic servo system. Independent drive at each machinery. Sidewalks provide easy access to engine, hydraulic and
Rated power @1 800 min-1 (rpm) High-strength piston rods and tubes adopted. Cylinder cushion track allows counter rotation of tracks. electrical components.
ISO14396 �������������������������� 567 kW (770 PS) mechanisms are provided for boom, arm, bucket and dump cylinders.
Maximum torque ������������������ 3 468 N·m (354 kgf·m)
at 1 350 min-¹ (rpm) Cylinder Dimensions
Piston displacement ������������� 23.15 L Loading shovel
3 4
Bore and stroke ������������������� 170 mm x 170 mm Quan. Bore Rod diameter 7
Starting system �������������������� 24 V electric motor Boom 2 230 mm 160 mm 2 5
Batteries ������������������������������� 2 x 12 V, 2 x 185 AH (20hr) Arm 1 215 mm 150 mm
Bucket 2 200 mm 150 mm
Model ����������������������������������� Cummins QSK23-C Dump 2 140 mm 85 mm
1 6
Type ������������������������������������� Water-cooled, 4-cycle, 6-cylinder Level 1 230 mm 160 mm
in line, turbo-charged direct injection 12
chamber-type diesel engine. 8
Backhoe
Emission Certification ����������� Not Certified
Quan. Bore Rod diameter
Rated power @1 800 min-1 (rpm) 9
Boom 2 230 mm 160 mm
ISO14396 �������������������������� 567 kW (770 PS) 16
Arm 1 260 mm 180 mm
Maximum torque ������������������ 3 468 N·m (354 kgf·m)
at 1 350 min-¹ (rpm) Bucket (for 3.6 m arm) 1 230 mm 160 mm
1 Engine 13 Batteries
Piston displacement ������������� 23.15 L Bucket (for 3.4 m BE-arm) 1 240 mm 170 mm 11 2 Pump Drive Unit 14 Operator Cab
Bore and stroke ������������������� 170 mm x 170 mm 10
3 Hydraulic Pump x 3 15 Air-Conditioning Unit
Hydraulic Filters
Starting system �������������������� 24 V electric motor 4 Hydraulic Oil Tank 16 Slide Ladder
All hydraulic circuits have high-quality hydraulic filters for protection
Batteries ������������������������������� 2 x 12 V, 2 x 185 AH (20hr) against oil contamination and longer life of hydraulic components. 14 5 Fuel Tank 17 Lubricator
13 17
15 6 Engine Radiator 18 DEF Tank (Tier 4 Final only)
Qty.
7 Engine Air Cooler 19 After Treatment Device (Tier 4 Final only)
HYDRAULIC SYSTEM Full flow filter 2 30 µm
8 Oil Cooler 20 Engine Oil Filter
Hitachi's ETS (Electronic Total control System) can achieve maximum Drain filter 1 10 µm
9 Main Control Valve 21 Pilot Filter
job efficiency by reducing fuel consumption and noise levels, while (For all plunger type pumps & motors)
10 Swing Control Valve 22 Transmission Oil Filter
maximizing productivity through the optimization of engine-pump Suction filter 2 177 µm 1 Left Control Lever/Horn Switch 10 Operator’s Seat
11 Swing Device x 2 23 Pump Drain Filter
functions with excellent controllability increasing operator comfort. Pilot filter 1 10 µm 2 Left Travel Pedal 11 Cab Door Release Lever
12 Center Joint
• E-P Control (Computer-aided Engine-Pump Control system) Line filter (Delivery filter) 3 95 µm 3 Left Travel Lever 12 Pilot Control Shut-Off Lever
Main pumps regulated by electric engine speed sensing control These filters are centralized in arrangement for facilitating maintenance. 4 Right Travel Lever 13 Glove Compartment
system. Optimum operation mode selectable among 3 power modes Swing Device
depending on type of job. 5 Right Travel Pedal 14 Fuse Box
2 high-torque, axial-piston motors with planetary reduction gear
• HIOS lllB assures fully independent and combined operations. 6 Right Control Lever/Power Boost Switch 15 Cigar Lighter bathed in oil. Swing circle is single-row, shear-type ball bearing
• High-pressure 2-speed travel system for high traction force and 7 Multi Function Monitor Panel 16 Switch Panel with induction-hardened internal gear. Internal gear and pinion gear
travel speed. 8 Switch Panel 17 Glove Compartment (Hot and Cool Box) immersed in lubricant. Swing parking brake is spring-set, hydraulic-
• Forced-cooling pump drive system released disc type.
9 Key Switch
• TIG (Tungsten Insert Gas) welding pipings
Swing speed ���������������������������������������������������������������� 5.2 min-1 (rpm)
Main pumps ����������������������������������� 3 variable-displacement, swash
plate type axial piston pumps Operator's Cab
Max.oil flow ����������������������������������� 3 X 520 L/min The sturdy cab, with OPG top guard Level ll(ISO), helps protect the
Pilot pump �������������������������������������� Gear pump operator from falling objects. Independent, pressurized, 1 100 mm wide, 1
Max.oil flow ����������������������������������� 56.0 L/min 900 mm high, roomy 3.47 m3 cab with tinted-glass windows features
Fan pump ��������������������������������������� variable-displacement, swash all-round visibility. Spring-suspension-type, fully-adjustable reclining
seat with armrests; movable with or without front and swing control
plate type axial piston pumps levers by slide. Instruments and control panel are within easy reach of
Max.oil flow ����������������������������������� 130 L/min the operator.
Powerful fresh air ventilation type air conditioner. Cool-and-hot box
and rotatable blower louvers also serve as defrosters. Thus, rapid air-
conditioning can be achieved for operator comfort.
Fluid-filled elastic-mounting and sound-proofing structure to reduce
noise level and vibration.

Noise level................................. 72 dB(A) in the cab; on max.

engine speed under no-load condition.
(Tier 4 Final model)
Eye level height
Backhoe................................. 3 650 mm
Loading Shovel....................... 4 730 mm

2 3
 SPECIFICATIONS MEMO

UNDERCARRIAGE SERVICE REFILL CAPACITIES

Tracks Fuel tank 1 700 L
Tractor-type undercarriage. Bolt linkage for side frame assures durability. Engine coolant 126 L
Heavy-duty track frame of all-welded, stress-relieved structure. Top- Engine oil 95 L
grade materials used for toughness. Lifetime-lubricated induction-
Pump drive 15 L
hardened track rollers, idlers and sprockets with floating seals. Track
Swing drive device 2 x 25
shoes of rolled alloy with double grousers. Durable strut reinforced track
links with track guards. Hydraulic (grease) track adjusters with shock Travel drive device 2 x 43
absorbing recoil springs. Hydraulic system 1 350 L
Hydraulic oil tank 648 L
Tractor-type Undercarriage DEF tank (Tier 4 Final only) 145 L
Double grouser track shoes of induction-hardened rolled alloy. Grease tank (Lincoln type) 95 L
Shoe width .................... 700 mm standard
900 mm optional for Backhoe attachment only

Numbers of Rollers and Shoes on Each Side

Upper rollers ....................................................................................... 3
Lower rollers ....................................................................................... 8
Track shoes ...................................................................................... 49

Travel Device
Each track driven by a high-torque, axial piston motor through
planetary reduction gears, allowing counter rotation of the tracks. Easily
replaceable sprockets. Parking brake of spring-set, hydraulic-released
disc type.
Travel speeds ....................................................... High : 0 to 3.5 km/h
Low : 0 to 2.4 km/h
Maximum traction force ........................................ 707 kN (72 100 kgf)
Gradeability ...................................................... 70 % (35 degree) max.

WEIGHTS AND GROUND PRESSURE

Loading Shovel
Equipped with 6.5 m3 (ISO Heaped) bottom dump bucket
Shoe type Shoe width Operating weight Ground pressure
FCO 117 000 kg 148 kPa (1.51 kgf/cm2)
Double grousers 700 mm
T4F 118 000 kg 149 kPa (1.52 kgf/cm2)
Ground pressures are based on ISO 16754

Backhoe
EX1200-7: Equipped with 9.0 m boom, 3.6 m arm, and 5.2 m3 (ISO heaped) bucket
Shoe type Shoe width Operating weight Ground pressure
FCO 115 000 kg 145 kPa (1.48 kgf/cm2)
700 mm
T4F 117 000 kg 148 kPa (1.51 kgf/cm2)
Double grousers
FCO 116 000 kg 114 kPa (1.17 kgf/cm2)
900 mm
T4F 118 000 kg 116 kPa (1.19 kgf/cm2)
Ground pressures are based on ISO 16754

EX1200-7 BE-front: Equipped with 7.55 m BE-boom, 3.4 m BE-arm, and 6.7 m3 (ISO heaped) bucket
Shoe type Shoe width Operating weight Ground pressure
FCO 117 000 kg 148 kPa (1.51 kgf/cm2)
700 mm
T4F 119 000 kg 150 kPa (1.53 kgf/cm2)
Double grousers
FCO 118 000 kg 116 kPa (1.19 kgf/cm2)
900 mm
T4F 120 000 kg 118 kPa (1.21 kgf/cm2)
Ground pressures are based on ISO 16754

4 5
 SPECIFICATIONS

LOADING SHOVEL ATTACHMENTS BACKHOE ATTACHMENTS

Boom and arm are all-welded, low-stress, high-tensile strength steel full- • Dual-support-type boom/arm/bucket pin linkage Boom and arm are all-welded, low-stress, full-box section design. • Flexible pin at the arm top and link A for bucket linkage.
box section design. Efficient, automatic level crowding achieved by one- • Double lip pin seals plus O-ring at arm top Bucket of all-welded high-strength steel structure, side clearance adjust
lever control as the parallel link mechanism keeps the bucket digging angle mechanism is provided on the bucket joint brackets. BE (Bulk Excavation) front
constant, and level cylinder circuit maintains the bucket height constant • Two-points support-type boom cylinder pin linkage BE-front: The EX1200-7 BE-front is designed and manufactured as a
(Auto-Leveling Crowd Mechanism). • Double lip pin seals (in all portions) plus O-ring at arm top and link A production-oriented machine. Its features include a short arm and boom,
large-capacity bucket, large-digging force and superb digging / loading
• Twistlok-pro bucket teeth
capability.
Bucket
Capacity (heaped)
Width No.of teeth Weight Type Materials density Bucket
ISO 7546 (Heaped 2:1)
5.9 m³ 2 510 mm 6 10 000 kg 1 800 kg/m3 or less Capacity Width Materials density
6.5 m³ 2 700 mm 6 9 390 kg 1 800 kg/m3 or less No. BE-front 9.0 m boom
ISO 7451 Weight Type
Without shroud With shroud of teeth 7.55 m BE-boom
:Bottom dump type rock bucket (Heaped 1:1) 3.6 m arm
3.4 m BE-arm
:Bottom dump type general purpose bucket 5.2 m3 2 140 mm 5 5 450 kg − 1 800 kg/m3 or less
7.0 m3 2 640 mm 5 7 860 kg 1 800 kg/m3 or less −
:General purpose bucket − :Not applicable
WORKING RANGES

Unit: mm WORKING RANGES

Meter
14 Bucket capacity
G 6.5 m3
ISO 7456 (Heaped 2:1)
A Min. digging distance 4 510
12 Meter Unit: mm
B Min. level crowding distance 6 580
7.55 m
C Level crowding distance 4 370 14 E Boom length 9.0 m
BE-boom
10
D Max. digging reach 11 500 3.4 m
H Arm length 3.6 m
E Max. cutting height 12 410 12 BE-arm
8 E’ Max. dumping height 8 750 Bucket capacity
10 7.0 m3 5.2 m3
F Max. digging depth 4 780 ISO 7451 (Heaped 1:1)
E
6 Working radius at max. A Max. digging reach 13 790 15 350
G 6 140 8
dumping height C Max. digging
A’ 13 410 15 010
E’
H Max. bucket opening width 1 880 reach (on ground)
4 6
60 ton class B Max. digging depth 8 100 9 380
Arm crowding force on ground 585 kN (59 700 kgf)
Bucket digging force 709 kN (72 300 kgf) D Max. digging
4 B’ 7 960 9 260
2 depth (2.5m level)
2 D' C Max. cutting height 12 340 13 460
0 D Max. dumping height 8 010 9 080
Ground Line
0 D’ Min. dumping height 3 220 4 160
60 ton class Ground Line
2 E Min. swing radius 6 770 7 740
F 2 G
F Max. vertical
A F 4 440 6 450
B B'
wall
4 4
Min. level crowding
G 4 210 5 790
C B distance
6
6 D 569 kN 482 kN
2.5 m Bucket digging force (ISO)*
58 000 kgf 49 200 kgf
14 12 10 8 6 4 2 0 Meter 8
438 kN 430 kN
A' Arm crowd force (ISO)*
44 700 kgf 43 900 kgf
10 A
*This is the calculated value at the loading point (Cutting Edge) conforming to ISO.
18 16 14 12 10 8 6 4 2 0 Meter

6 7
 EQUIPMENT LIFTING CAPACITIES

STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details.
A: Load radius
ENGINE • Cigarette lighter LIGHTS B: Load point height
• Alternator belt auto-tensioner • Digital clock • 1 boom LED right C: Lifting capacity
• Auto-idle system • Dome light linked to door • 1 step LED light
• Auto shut down control • Drink holder with hot and cool functions • 2 cab LED lights
• Cartridge-type engine oil filter • Electrical horn • 2 counterweight LED lights METRIC MEASURE
• Cartridge-type fuel filter (only for Tier 4 F) • Engine control dial • 2 working LED lights Rating over-side or 360 degrees Rating over-front Unit: 1 000 kg
• Coolant filter • Evacuation hammer
Load radius
• Dry-type air filter with clean dust cup • External input port (Aux terminal) UPPERSTRUCTURE At max. reach
Load 2m 4m 6m 8m 10 m
• Element -type fuel filter • Floor mat • Centralized lubrication system for swing Conditions point
• Eco control • Footrest bearing height meter
• Fan guard • Large storage space • Control valves with main relief valves
• Isolation-mounted engine • Hot and cool box and port relief valves EX1200 -7 BE 8m *16.9 *16.9 *6.82 *6.82 12.6
• Overheat prevention control • Intermittent wiper interlocked with front • Electric grease gun with hose reel BE-boom 7.55 m
6m 19.2 *19.7 *6.89 *6.89 13.1
• Power mode switch control (ECO/PWR/HP) windshield washer BE-arm  3.4 m
• Rear view camera 4m *26.7 *26.7 18.3 *21.3 *7.33 *7.33 13.3
Bucket
• Radiator, air cooler and oil cooler with • Laminated glass windshield • Slow return orifices and make up valves ISO 7451 (Heaped 1:1) : 7.0 m³ 2m 25.9 *30.8 17.2 *23.1 *8.19 *8.19 13
dust protective net • OPG top guard level ll (ISO10262) for cylinder circuits Shoes  700 mm
• SCR muffler (Tier 4 Final only) • Pilot control shut-off lever 0 (Ground) 24.4 *32.9 16.3 23.5 *9.66 *9.66 12.4
• Undercover
• 140A alternator • Reinforced/tinted (Green color) glass • 18 000kg counterweight -2 m 39.8 *45.3 23.7 *32.3 15.8 23.0
side and rear windows -4 m *48.8 *48.8 *38.7 *38.7 23.8 *28.3 16.1 *18.8
HYDRAULIC SYSTEM • Seat belt UNDERCARRIAGE -6 m *26.6 *26.6 *17.6 *17.6
• Auto power lift control (BH) • Small caddy • Hydraulic (Grease) track adjuster with
• Boom mode selector system • Speakers at the side shock absorbing recoils spring Load radius
• Control valve with main relief valve • 12 V power supply • Spring-set/hydraulic-released disc type At max. reach
Load 2m 4m 6m 8m 10 m 12 m
• Engine speed sensing system parking brake Conditions point
• E-P control system MONITOR SYSTEMS • Track and idler guards height meter
• Full-flow filter • Meters: • Travel motor cover
• HIOS lllB (Human & Intelligent Operation Auto-idle • 700 mm shoe EX1200 -7 STD 10 m *10.8 *10.8 13.5
System) DEF gauge (only for Tier 4 F) Boom 9.0 m
8m 14.2 *14.9 9.44 *10.6 14.4
Arm 3.6 m
• Line filter (Delivery filter) Engine coolant temperature gauge MISCELLANEOUS 6m *17.4 *17.4 13.7 *15.4 8.34 *10.8 14.8
Bucket
• Overheat prevention control Fuel gauge • Auto-lubrication system for front- ISO 7451 (Heaped 1:1) : 5.2 m3 4m *26.2 *26.2 18.5 *19.7 12.9 *16.4 7.82 *11.3 14.9
• Pilot filter Hour meter attachment Shoes 700 mm
2m 24.5 *30.2 17.0 *22.0 12.1 17.6 7.81 11.9 14.7
• Pump drain filter Indicator BH, BE front : Except bucket arm joint pin
• Reverse Fan system
0 (Ground) 23.1 *32.0 16.0 23.1 11.5 16.9 8.38 12.6 14.2
LD front : Include bucket arm joint pin
• Suction filter DATA LOGGING SYSTEM -2 m 22.6 *31.6 15.5 22.6 11.2 16.5 9.76 *13.7 13.2
• Dual isolator switch
• Transmission oil cooling system • DLU (Data-logging unit) continuously • Elevated cab (for Loading Shovel) -4 m *23.3 *23.3 *38.0 *38.0 22.8 *29.5 15.4 *22.4 11.3 *16.4
records performance of the engine and • ISO conforming stairs and handrails -6 m *31.7 *31.7 23.4 *24.9 16.0 *18.3
CAB the hydraulic system. • Slide ladder
• Adjustable armrests The record can be down-loaded by PC. • Slip resistance plate Notes: 1.Ratings are based on ISO 10567.
• Adjustable reclining seat And for Fleet management system • Wide side walk 2.Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on firm,
• All-weather sound-suppressed steel (Provided by Wenco etc.) connection** level ground or 87% full hydraulic capacity.
3.The load point is a hook (not standard equipment) loaded on the back of the bucket.
integrated cab 4.*Indicates load limited by hydraulic capacity.
• Ashtray
• Auto controlled air conditioner* with
defroster
• Auto-idle switch Berat Bucket 6,650 ton volume 7M3, jika penambahan penguatan 15% dari berat bucket maka total berat bucket
• Auto-tuning AM-FM radio
7,650 ton
Berat material kondisi heap 7*2,35 = 16,45 ton
Berat maksimal Bucket Isian = 24,1 ton

OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer for details. Dari tabel, Load Radius utk penggunaan bucket dan berat material di toka adalah 8 meter, dengan berat
• Additional fuel filter • Contamination sensor • Right and left side cameras maksimal 26,7 (operasi swing) dan 26,7 untuk tidak swing.
• Additional travel motion alarm • Electric fuel refilling pump device • Roll screens
• Additional 1 boom LED light • Fuel refilling piping • Standard tool kit % beban dari load radius 8 meter operasi swing adalah 24,1/26,7 = 90,3%
• Additional 2 Cab LED lights • Full track guard • Sun visor operasi tdk swing 24,1/26,7 = 90,3%
• Additional 1 Cab rear LED light • Hand rail on the oil cooler, • Swing alarm
• Aerial angle Radiator,counter weight, air cleaner • Travel motion alarm device
• Air suspension & heater seat • High altitude application*** • USB supply Jika operasional menyebabkan load radius melebihi 8 meter maka kerja hydraulic dan rekomendasi beban
• Bucket auto lubrication system(BE front) • High cab kit (for Backhoe) • WIU (Wireless Interface Unit)** terhadap kekuatan arm+boom akan terlampaui, hal ini akan menyebabkan:
• CAB front guard • Large sized air cleaner • 900 mm shoe (BH only) 1. over load terhadap kinerja hydraulic
• Center frame under guard • LC side frame 2. over load terhadap kemampuan struktur material pada arm dan boom
• Cold weather package • Marine specification
• Communication system** • Pre-cleaner *: Contains fluorinated greenhouse gases, Refrigerant type:
GPRS communication system Full view type HFC-134a, GWP: 1430, Amount: 1.25 kg, CO2e: 1.79 ton.
Sateliltedata transmitting system Top spin type **: The availability of the system depends on licensing
regulations in each country.
Please contact Hitachi dealer for more information.
***: Engineered on request

8 9
 TRANSPORTATION
Illustrations show Tier 4 Final type.
• Easily assembled owing to local assembling system requiring no welding.

UPPERSTRUCTURE UPPERSTRUCTURE
Unit: mm Unit: mm

Side walk for backhoe Side walk

Weight : 254 kg Weight : 131 kg
Upperstructure for backhoe
Weight : 39 200 kg (T4F)
38 500 kg (FCO)

1 410

1 410
2 420 1 970

3 540
Width : 1 030 Width : 832

Side walk Step Slide ladder

Weight : 84.6 kg Weight : 19.5 kg Weight : 344 kg
692

325
1 410
6 920 1 110

2 180
Weight : 118 kg
Width : 3 590 476

245

430
1 160

Width : 625 Width : 980

Counterweight Washers Bolts Chain Handrail

Weight : 18 000 kg for counterweight for counterweight Weight : 0.4 kg Weight : 1.55 kg
Weight : 0.878 kg × 10 Weight : 6.24 kg × 10
154
918 Ø90
23

560
575

Width : 43
576
1 810

Handrail Handrail
Weight : 15.8 kg Weight : 11.9 kg

1 030
1 010

Width : 3 500
1 110
635

Width : 577 Width : 530

10 11
 TRANSPORTATION
Illustrations show Tier 4 Final type.
• Easily assembled owing to local assembling system requiring no welding.

UPPERSTRUCTURE UPPERSTRUCTURE
Unit: mm Unit: mm

Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type)
Side walk Handrail Handrail Weight : 3.07 kg Weight : 4.26 kg Weight : 4.27 kg
Weight : 174 kg Weight : 12.3 kg Weight : 27.7 kg

300

183

532
1 020
1 250
1 290
1 095
470
545

1 580
2 480 650 Width : 60 Width : 80 Width : 90

Width : 834 Width : 267 Width : 637 Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type)
Weight : 4.73 kg Weight : 22.9 kg Weight : 29.4 kg

Handrail Step Hose real

Weight : 7.35 kg Weight : 3.58 kg Weight : 33.8 kg

645
765
532
782
155

400
545
908
908
547

Width : 138 Width : 495 Width : 765

560

1 020

Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type)
50

Weight : 18.9 kg × 2 Weight : 4.95 kg Weight : 5.27 kg Weight : 1.12 kg

Width : 50 Width : 265

510

306
306
450

40
Radiator cover Bolt assembly × 8 Oil cooler cover 495 645
Weight : 75.6 kg Weight : 75.4 kg
905
1 580 1 570

Width : 545 Width : 155 Width : 155 Width : 40

Bolt assembly × 4

Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type) Muffler cover (Tier 4 Final type)
Weight : 0.85 kg Weight : 1.33 kg Weight : 0.85 kg Weight : 0.15 kg
1 870

1 870

530 290 65
315
40

40

40

40
Width : 75 Width : 75

Width : 40 Width : 40 Width : 40 Width : 40

12 13
 TRANSPORTATION
Illustrations show Tier 4 Final type.
• Easily assembled owing to local assembling system requiring no welding.

UPPERSTRUCTURE UPPERSTRUCTURE
Unit: mm Unit: mm

Ejector Exhaust pipe (T4F type) Exhaust plumbing fixed Gasket (T4F type) Rear lights Brackets Brackets
Weight : 15.0 kg Weight : 46.6 kg bracket (T4F type) Gasket for exhaust laying Weight : 0.5 kg × 2 Weight : 0.22 kg × 2 Weight : 1.0 kg × 2
Weight : 11.1 kg pipes installation
Weight : 1.2 kg Ø343

416
1 100

836

140
89
Gasket for the ejector installation
Ø320 320
Weight : 1.2 kg
Ø320
148.4
414 119
Ø217

Width : 343 Width : 324 Width : 2

U-Bolt assembly Gasket for the ejector Mirror assembly Mirror assembly Mirror assembly Rear camera harness Rear camera harness Lamp:Head
(T4F type) installation (FCO type) Weight : 2.49 kg Weight : 2.07 kg Weight : 1.77 kg Weight : 1.0 kg Weight : 0.5 kg Weight : 1.03 kg
Weight : 0.82 kg Weight : 1.2 kg
337
Ø320

312
355
281

362
256
373
275

Width : 26 Width : 2 Width : 125 Width : 157 Width : 101

Mirror assembly Mirror assembly Camera Pipe (T4F type) Pipe Assem (T4F type) Tube: Plastic (T4F type)
Weight : 2.89 kg Weight : 1.93 kg Weight : 2.34 kg Weight : 3.67 kg Weight : 0.95 kg
235

Ø11
98

244 234
485

166
416
950
1 950
166

139
430

Width : 125 Width : 132

Width : 51 Width : 64

Antenna Wiper assembly Lamp assembly Lamp assembly Pipe (FCO type) Pipe (FCO type) hose (FCO type)
Weight : 0.2 kg Weight : 0.6 kg × 2 Weight : 1.0 kg Weight : 1.1 kg Weight :1.94 kg Weight : 0.54 kg Weight : 0.13 kg

108
Ø51

Ø63
98
161

279
1 000
110

Width : 87 Width : 51 Width : 51 Width : 63

14 15
 TRANSPORTATION
Illustrations show Tier 4 Final type.
• Easily assembled owing to local assembling system requiring no welding.

UPPERSTRUCTURE UNDERCARRIAGE
Unit: mm Unit: mm

Pipe Slide frame Bolts

Pipe Tube: Plastic
Weight : 0.22 kg Weight : 15 200 kg × 2 (with 700 mm shoe) Weight : 2.61 kg × 52
15 900 kg × 2 (with 900 mm shoe)

25
162

Ø11
Ø10

69

216
1 260 700
162

1 710
Width : 65
Spacers
Weight : 2.24 kg × 52
6 500
Muffler cover (FCO type) Muffler cover (FCO type) Muffler cover (FCO type)
Weight : 15.8 kg Weight : 40.2 kg Weight : 4.94 kg
838 Width : 1 003 (with 700 mm shoe)

80
1 003 (with 900 mm shoe)

301
Ø80
481
765

770

838 1 290
Ladder Travel device cover (R)(L)
Width : 230 Width: 132 Weight : 20.8 kg (for 700 mm shoe) × 2 Weight : 25.0 kg × 2

640
Muffler cover (FCO type) Muffler cover (FCO type) Muffler cover (FCO type)
Weight : 20.5 kg Weight : 4.94 kg Weight : 8.00 kg
301

301

937
780

807
481 779

884

645
Width : 255 Width : 132 Width : 132

Width : 302 Width : 258

Cover frame (FCO type) Cover frame (FCO type) Cover frame (FCO type) Cover frame (FCO type)
Weight : 19.0 kg Weight : 6.97 kg Weight : 17.6 kg Weight : 17.2 kg
200

751

751

1 600 1 331
100

728
728

Width: 107 Width: 50 Width : 130 Width : 130

16 17
 TRANSPORTATION
Illustrations show Tier 4 Final type.
• Easily assembled owing to local assembling system requiring no welding.

BACKHOE ATTACHMENT OVERALL

Unit: mm Unit: mm

Boom
BACKHOE
EX1200-7B
Boom length Arm length A B Width Weight
BH Front 9.0 m 3.6 m 15 970 mm 5 770 mm 5 430 m 117 000 kg
BE Front 7.55 m 3.4 m 14 580 mm 5 970 mm 5 430 m 119 000 kg
EX1200-7 B
Boom length Arm length A B Width Weight
BH Front 9.0 m 3.6 m 15 970 mm 5 770 mm 5 430 m 115 000 kg

B
BE Front 7.55 m 3.4 m 14 580 mm 5 970 mm 5 430 m 117 000 kg

LOADER ATTACHMENT
Unit: mm

A
Bucket assembly Boom & arm assembly
Weight : 15 500 kg
Boom
A B Width Weight
length
EX1200-7 9.0 m 9 410 mm 3 460 mm 1 590 mm 12 300 kg

EX1200-7 BE 7.55 m 7 960 mm 3 450 mm 1 580 mm 11 800 kg

3 120
B

8 690
Arm Width : 1 830

B
Arm length A B Width Weight
A Boom cylinders
EX1200-7 3.6 m 5 090 mm 1 950 mm 1 020 mm 6 130 kg
Weight : 1 170 kg x2
EX1200-7 BE 3.4 m 4 940 mm 1 990 mm 1 110 mm 6 750 kg

450
ISO 7451
A B Max. Width Weight
A (Heaped 1:1) 3 490
5.9 m³ 2 770mm 2 480mm 2 690mm 10 000 kg
6.5 m³ 2 770mm 2 680mm 2 890mm 9 390 kg Width : 536

Boom cylinders
Weight : 1 130 kg × 2 OVERALL
Unit: mm
450

356

LOADING SHOVEL
3 490
Weight : EX1200-7B 118 000 kg
EX1200-7 117 000 kg
Width : 356 Width : 5 430

Bucket

Capacity
5 350

ISO 7451 A B Width Weight Type

(Heaped 1:1)
A
5.2 m3 2 660 mm 2 210 mm 2 120 mm 4 910 kg
7.0 m3 2 820 mm 2 220 mm 2 400 mm 6 650 kg
:General purpose bucket

15 400

18 19
 These specifications are subject to change without notice.
Illustrations and photos show the standard models, and may or may not include optional equipment,
accessories, and all standard equipment with some differences in color and features.
Before use, read and understand the Operator’s Manual for proper operation.

Hitachi Construction Machinery Co., Ltd.

KS-EN409P 19.03 (KA/SO,GT2)
www.hitachi-c-m.com
Printed in Japan