0% found this document useful (0 votes)
80 views8 pages

Test Report

The test report summarizes the results of various textile tests performed on wool acrylic pullovers. Key findings include: - The fibre composition was found to be 52% acrylic and 48% wool, within the specified 50% composition tolerance. - Tests for linear density, mass per unit area, bursting strength, pH value, and colour fastness to light passed requirements. - Tests for colour fastness to washing, perspiration, dry and wet rubbing showed some failures when measurement of uncertainty was taken into account. - Other tests such as dimensional stability to washing, pilling resistance, knit type, and abrasion resistance passed requirements.

Uploaded by

Jafer Alqutawneh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
80 views8 pages

Test Report

The test report summarizes the results of various textile tests performed on wool acrylic pullovers. Key findings include: - The fibre composition was found to be 52% acrylic and 48% wool, within the specified 50% composition tolerance. - Tests for linear density, mass per unit area, bursting strength, pH value, and colour fastness to light passed requirements. - Tests for colour fastness to washing, perspiration, dry and wet rubbing showed some failures when measurement of uncertainty was taken into account. - Other tests such as dimensional stability to washing, pilling resistance, knit type, and abrasion resistance passed requirements.

Uploaded by

Jafer Alqutawneh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

TEST REPORT NO: 176561 Date: 15 March 2022

SGS JORDAN
AMMANM AL-JBEIHA,
YAJOUZ STREET
CARACUS BUILDING ENTRANCE NO 1
3RD FLOOR OFFICE 311 PO BOX 930388
AMMAN 11193
JORDAN

The following sample(s) was/were submitted and identified by/on behalf of the client as:

Retailer Not Specified


Description of article WOOL ACRYLIC PULLOVERS (5TH BATCH) (GARMENTS)
Retailer style number DARK BLUE
Retailer Standard Number PUBLIC SECURITY DIRECTORATE - JORDAN
Order No./ Buyer 6995/WP/2021/1
Quality/Fibre Composition 50% WOOL / 50% ACRYLIC
Date Sample Received/Test Started: 04 March 2022

Tests Pass Fail Remarks


Fibre composition See results
Linear Density X
Determination of mass per unit area X
Bursting Strength X
PH Value X
Colour Fastness to Washing X*
Colour Fastness to Perspiration (Acid) X*
Colour Fastness to Perspiration (Alkali) X*
Colour Fastness to Dry Rubbing X*
Colour Fastness to Wet Rubbing X*
Colour Fastness to Light X
Dimensional Stability to Washing X
Resistance to Pilling (ICI Pill Box) X*
BS5441 Type of Knit X
Abrasion Resistance X

(please note our uncertainty of measurement has been taken into account when the above results were pass/failed)
(*could pass/fail if UOM is taken into account)
(Any statement of conformity made in this report unless otherwise stated in the test specification(s) is in line with SGS United Kingdom
(Leicester) Decision rule LEI-GEN-PROC-012).

Signature

This document is issued by the Company under its General Conditions of Service accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject
to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits
of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law." Unless otherwise stated the results shown in this
test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only

SGS United Kingdom Ltd Whittle Estate Cambridge Road Whetstone Leicester LE8 6LH t +44 (0)116 284 6780 f +44 (0)116 284 6781 www.sgs.com

Member of the SGS Group (SGS SA)

Registered in England No : 1193985 Registered Office : Rossmore Business Park Ellesmere Port Cheshire CH65 3EN

Page 1 of 8
Customer: SGS JORDAN Test Report No: 176561

Test Results

For and on behalf of


SGS United Kingdom Ltd
All samples are conditioned to ISO 139 where conditioning is required (unless otherwise stated)

Main

*Fibre Composition
Test Method Regulation (EU) 1007/2011
Manual Separation
Component Result Requirement

(Main fabric) Acrylic 52.0% 50% Acrylic


Wool 48.0% 50% Wool
+/-3% Tolerance
(Measurement of uncertainty for this test +/-1%)
*Sub contracted to an TURKAK accredited lab

Linear Density (BS 5441:1988 Section 2 Parts 11)

31.7 Nm (Nm 30+2)


(Measurement of uncertainty for this test is +/-12%)

Weight per Square Metre (BS EN 12127:1998)

Weight (g/m2) 402 (400g/m2)


(Measurement of uncertainty for this test is 0.2%)

Resistance to Bursting (BS EN ISO 13938-2:2019) 30mm diaphragm

This document is issued by the Company under its General Conditions of Service accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject
to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits
of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law." Unless otherwise stated the results shown in this
test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS United Kingdom Ltd Whittle Estate Cambridge Road Whetstone Leicester LE8 6LH t +44 (0)116 284 6780 f +44 (0)116 284 6781 www.sgs.com

Member of the SGS Group (SGS SA)

Registered in England No : 1193985 Registered Office : Rossmore Business Park Ellesmere Port Cheshire CH65 3EN

Page 2 of 8
Customer: SGS JORDAN Test Report No: 176561

Test Results
Burst pressure
925.5 (650kPa)
(kPa)

Distension (mm) 17.6


(Measurement of uncertainty for this test is 7.5 %)

Main

pH of Aqueous Extract (BS EN ISO 3071:2006)

Mean pH: 5.7

Requirement: 4.0 – 9.0

pH of Test Solution: 5.6

Temp of Solution °C: 20.5

Type of Solution Used: 0.1M Potassium Chloride

Conclusion Pass
(Measurement of uncertainty for this test is +/-0.2 units of pH)

Colour Fastness to Washing (BS EN ISO 105-C06:2010) @ 30°C

Colour Cellulose
Cotton Nylon 66 Polyester Acrylic Wool
change Diacetate
(3-4 nylon)
5 4 4 3-4 4 4 4 (4 all other
fibres)
(Measurement of uncertainty for this test is 1/2 grade)

Colour Fastness to Perspiration (BS EN ISO 105-E04:2013) (Acid)

Colour Cellulose
Cotton Nylon 66 Polyester Acrylic Wool
change Diacetate

This document is issued by the Company under its General Conditions of Service accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject
to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits
of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law." Unless otherwise stated the results shown in this
test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS United Kingdom Ltd Whittle Estate Cambridge Road Whetstone Leicester LE8 6LH t +44 (0)116 284 6780 f +44 (0)116 284 6781 www.sgs.com

Member of the SGS Group (SGS SA)

Registered in England No : 1193985 Registered Office : Rossmore Business Park Ellesmere Port Cheshire CH65 3EN

Page 3 of 8
Customer: SGS JORDAN Test Report No: 176561

Test Results
(3-4 nylon)
5 4 4 3-4 4 4 4 (4 all other
fibres)
(Measurement of uncertainty for this test is 1/2 grade)

Colour Fastness to Perspiration (BS EN ISO 105-E04:2013) (Alkaline)

Colour Cellulose
Cotton Nylon 66 Polyester Acrylic Wool
change Diacetate
(3-4 nylon)
5 4 4 3-4 4 4 4 (4 all other
fibres)
(Measurement of uncertainty for this test is 1/2 grade)

Main

Colour Fastness to Rubbing (BS EN ISO 105-X12:2016)

Dry Rating: 3-4 (4)

Wet Rating: 4 (4)


(Measurement of uncertainty for this test is 1/2 grade)

Colour Fastness to Light (BS EN ISO 105-B02:2014)

BWS
4+ (4)
Rating:
(Measurement of uncertainty for this test is 1/2 grade)

Dimensional Stability to Washing BS EN ISO 6330:2012/ BS EN ISO 5077:2008/ BS EN


Wash: 3N 30ºC Dry: Flat ISO 3759:2011
Actual Measurements Before Wash After
(mm) Wash (mm) % Change

Front Length 460.0 447.0 -2.8 (+/-5%)

Front Width 445.0 440.0 -1.1

Sleeve 529.0 520.0 -1.7

This document is issued by the Company under its General Conditions of Service accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject
to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits
of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law." Unless otherwise stated the results shown in this
test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS United Kingdom Ltd Whittle Estate Cambridge Road Whetstone Leicester LE8 6LH t +44 (0)116 284 6780 f +44 (0)116 284 6781 www.sgs.com

Member of the SGS Group (SGS SA)

Registered in England No : 1193985 Registered Office : Rossmore Business Park Ellesmere Port Cheshire CH65 3EN

Page 4 of 8
Customer: SGS JORDAN Test Report No: 176561

Test Results
Back Length 586.0 572.0 -2.4

Back Width 450.0 452.0 +0.4


(Measurement of uncertainty for this test is 0.5%)

Type of Knit (BS 5441) Non UKAS

Rib knit

Main

Resistance to Pilling (BS EN ISO 12945-1:2001) (3N @ 30C Dry: Flat)

Cycles Direction Rating

Length
4 Slight fuzzing (4)
7200
Width 4 Slight fuzzing
(Measurement of uncertainty for this test is 1/2 grade)

This document is issued by the Company under its General Conditions of Service accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject
to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits
of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law." Unless otherwise stated the results shown in this
test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS United Kingdom Ltd Whittle Estate Cambridge Road Whetstone Leicester LE8 6LH t +44 (0)116 284 6780 f +44 (0)116 284 6781 www.sgs.com

Member of the SGS Group (SGS SA)

Registered in England No : 1193985 Registered Office : Rossmore Business Park Ellesmere Port Cheshire CH65 3EN

Page 5 of 8
Customer: SGS JORDAN Test Report No: 176561

Test Results
Patchwork fabric

Colour Fastness to Washing (BS EN ISO 105-C06:2010) @ 30°C

Colour Cellulose
Cotton Nylon 66 Polyester Acrylic Wool
change Diacetate
(3-4 nylon)
5 4 4 3-4 3-4 4 4 (4 all other
fibres)
(Measurement of uncertainty for this test is 1/2 grade)

Colour Fastness to Perspiration (BS EN ISO 105-E04:2013) (Acid)

Colour Cellulose
Cotton Nylon 66 Polyester Acrylic Wool
change Diacetate
(3-4 nylon)
5 4 4 3-4 4 4 4 (4 all other
fibres)
(Measurement of uncertainty for this test is 1/2 grade)

Colour Fastness to Perspiration (BS EN ISO 105-E04:2013) (Alkaline)

Colour Cellulose
Cotton Nylon 66 Polyester Acrylic Wool
change Diacetate
(3-4 nylon)
5 4 4 3-4 4 4-5 4 (4 all other
fibres)
(Measurement of uncertainty for this test is 1/2 grade)

Colour Fastness to Rubbing (BS EN ISO 105-X12:2016)

Dry Rating: 3-4 (4)

Wet Rating: 4 (4)


(Measurement of uncertainty for this test is 1/2 grade)

Colour Fastness to Light (BS EN ISO 105-B02:2014)

BWS
4+ (4)
Rating:
(Measurement of uncertainty for this test is 1/2 grade)

This document is issued by the Company under its General Conditions of Service accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject
to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits
of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law." Unless otherwise stated the results shown in this
test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS United Kingdom Ltd Whittle Estate Cambridge Road Whetstone Leicester LE8 6LH t +44 (0)116 284 6780 f +44 (0)116 284 6781 www.sgs.com

Member of the SGS Group (SGS SA)

Registered in England No : 1193985 Registered Office : Rossmore Business Park Ellesmere Port Cheshire CH65 3EN

Page 6 of 8
Customer: SGS JORDAN Test Report No: 176561

Test Results
Patchwork fabric

Type of Knit (BS 5441) Non UKAS

Warp knit

Abrasion (BS EN ISO 12947-1:1999 & BS EN ISO 12947-2:2016) 9kPa


@ 30,000 Rubs
No Breakdown >30,000 Rubs
No Breakdown >30,000 Rubs
No Breakdown >30,000 Rubs
Lowest Breakdown >30,000 Rubs
Shade change 4-5 5,000 Rubs
(Measurement of uncertainty for this test is 4.5%)

Weight per Square Metre (BS EN 12127:1998)

Weight (g/m2) 275 (250g/m2)


(Measurement of uncertainty for this test is 0.2%)

Fibre Composition In house 28

Polyester 100.0 (%)


(Measurement of uncertainty for this test is 1.0%)

This document is issued by the Company under its General Conditions of Service accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject
to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits
of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law." Unless otherwise stated the results shown in this
test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS United Kingdom Ltd Whittle Estate Cambridge Road Whetstone Leicester LE8 6LH t +44 (0)116 284 6780 f +44 (0)116 284 6781 www.sgs.com

Member of the SGS Group (SGS SA)

Registered in England No : 1193985 Registered Office : Rossmore Business Park Ellesmere Port Cheshire CH65 3EN

Page 7 of 8
Customer: SGS JORDAN Test Report No: 176561

Test Results

End of Report

This document is issued by the Company under its General Conditions of Service accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject
to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction
issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits
of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law." Unless otherwise stated the results shown in this
test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS United Kingdom Ltd Whittle Estate Cambridge Road Whetstone Leicester LE8 6LH t +44 (0)116 284 6780 f +44 (0)116 284 6781 www.sgs.com

Member of the SGS Group (SGS SA)

Registered in England No : 1193985 Registered Office : Rossmore Business Park Ellesmere Port Cheshire CH65 3EN

Page 8 of 8

You might also like