Scribd
Upload
38 views1 page

Página 1 de 1 Technical Specifications

This document provides the technical specifications for 9-5/8 inch casing with a TC-II connection and grade P-110 material. Key details include: - Connection type is TC-II casing, size is 9-5/8 inches, weight is 53.50 lbs/ft, and grade is P-110. - Material properties for P-110 include minimum yield strength of 110,000 psi and minimum ultimate strength of 125,000 psi. - Pipe dimensions include nominal outer diameter of 9.625 inches, nominal inner diameter of 8.535 inches, and nominal wall thickness of 0.545 inches. - Recommended torque values for the connection are 19,400 to 22,

Uploaded by

inversionesdawillgg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

Página 1 de 1 Technical Specifications

This document provides the technical specifications for 9-5/8 inch casing with a TC-II connection and grade P-110 material. Key details include: - Connection type is TC-II casing, size is 9-5/8 inches, weight is 53.50 lbs/ft, and grade is P-110. - Material properties for P-110 include minimum yield strength of 110,000 psi and minimum ultimate strength of 125,000 psi. - Pipe dimensions include nominal outer diameter of 9.625 inches, nominal inner diameter of 8.535 inches, and nominal wall thickness of 0.545 inches. - Recommended torque values for the connection are 19,400 to 22,

Uploaded by

inversionesdawillgg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Specifications Página 1 de 1

Technical Specifications

Created for Jesús Rosales with TENARIS

Connection Type: Size(O.D.): Weight (Wall): Grade:


TC-II Casing 9-5/8 in 53.50 lb/ft (0.545 in) P-110
standard

Material
P-110 Grade
110,000 Minimum Yield Strength (psi)
125,000 Minimum Ultimate Strength (psi)
1450 Lake Robbins Dr., Suite 400
Pipe Dimensions The Woodlands, Texas, USA 77380
9.625 Nominal Pipe Body O.D. (in) Phone: (281) 297 - 8500
(800) 231-0283
8.535 Nominal Pipe Body I.D.(in) Fax: (281) 297 - 8525
0.545 Nominal Wall Thickness (in) E-mail: atlasbradford@grantprideco.com
53.50 Nominal Weight (lbs/ft)
52.90 Plain End Weight (lbs /ft)
15.546 Nominal Pipe Body Area (sq in)

Pipe Body Performance Properties


1,710,000 Minimum Pipe Body Yield Strength (lbs)
7,950 Minimum Collapse Pressure (psi)
10,900 Minimum Internal Yield Pressure (psi)
10,000 Hydrostatic Test Pressure (psi)

Connection Dimensions
10.487 Connection O.D. (in)
8.535 Connection I.D. (in)
8.500 Connection Drift Diameter (in)
5.23 Make-up Loss (in)

Connection Performance Properties


1,710,000 (1) Joint Strength (lbs)
22,830 Reference String Length (ft) 1.4 Design Factor
1,710,000 Compression Rating (lbs)
7,950 Collapse Pressure Rating (psi)
10,900 Internal Pressure Rating (psi)
52.4 Maximum uniaxial bend rating [degrees/100 ft]

Recommended Torque Values


19,400 (2) Minimum Final Torque (ft-lbs)
22,800 (2) Maximum Final Torque (ft-lbs)
(1) Joint strength is the elastic limit or yield strength of the pipe body or the connection, whichever is less.
(2) Torque values are recommended and can be affected by field conditions.

Connection specifications within the control of Grant Prideco were correct as of the date printed. Specifications are subject to change
without notice. Certain connection specifications are dependent on the mechanical properties of the pipe. Mechanical properties of mill
proprietary pipe grades were obtained from mill publications and are subject to change. Properties of mill proprietary grades should be
confirmed with the mill. Users are advised to obtain current connection specifications and verify pipe mechanical properties for each
application.

3/10/2006 1:29:59 PM

http://www.grantprideco.com/engineering/specsdirect/connQrySpecs.asp?ConnType=TC-II&Size... 10/03/2006

You might also like