...

IN IT FOR THE LONG HAUL

Industrial Surface Preparation

& Air Filtration Equipment

PRODUCT CATALOG

www.Novatekco.com
Novatek’s Pledge
“... in it for the long haul.” This simple phrase describes our commitment to you
and reflects the vision of our company.

Quality and Durability

Novatek’s products have a proven track record of high performance, quality,
and reliability. We are committed to deliver the finest, long-lasting surface
preparation and air filtration products in the industry. Novatek’s equipment
is built for the long haul.

Innovation
Novatek’s commitment to your business is second to none. Our team continues
to develop, manufacture and deliver innovative equipment that will satisfy your
company’s surface preparation and air filtration needs, now and in the future.
Novatek’s product lines are continually evolving, providing your company with
the equipment you need for the long haul.

Service
Novatek’s committed staff of industry specialists are waiting to assist you with
your most demanding projects. Let our 90 years of experience and extensive on
hand inventory work for you. Your purchase of a Novatek product is only the
beginning of a strong business relationship, as Novatek is in it for the long haul.

Partnerships
Novatek’s highly trained network of business partners helps us to extend our reach
globally. Our distribution partners are carefully selected and share our vision
of providing the best products and services in the industry. Novatek strives for
one hundred percent customer satisfaction — one hundred percent of the time.
Wherever you are in the world, Novatek and its team of professionals will be
there with you every step of the way.
Novatek values strong partnerships for the long haul.

Novatek …IN IT FOR THE LONG HAUL

Table of Contents

Air Filtration 3 Industrial Surface Preparation 35

Novair 1000 & 2000 4-5 Needle Guns / Scalers 36-41
Duravent / Ventilators 6 Needle / Pack or Bulk 42
Ducting / Duct-2-Go 7 Vibration Reduced Scalers 43-45
Accessories and Consumables 8-9 Long Reach Air Scrapers 46-48
Needles / Chisels / Scrapers 42, 49-51
VSE/Vacuum Shrouded Equipment 10 Air Hammers / Scaling Hammers 52
Needle Guns / Dustless 11-13 Deck Scalers 53
Roto Peen TM
Tools / Hand Scarifiers 14-17
Scabbler 11 Head 53
Roto Strip/Bristle Strippers 18-19 Concrete Scarifiers / Floor Planer 54-57
Grinders Shrouded - 5” & 7” 20-21
Universal Grinder Shrouds 22 CBS - Vacuum Blasting 58
Drill Shrouds 1” & 3” Dustless 22 CBS / Contained Blast Systems 59
Scaling Hammers / Air Hammers 23 Blast Workhead - Blast Workhead Kit 60-61
Dustless 11 Piston Deck Scaler 24 Workhead Stage 61
Dustless 11 Piston Floor Scabbler 25 HEPA Stage 62
Brushes and Consumables 63
HEPA Vacuum Systems 26
3.3 Gallon Backpack 27 Marine Products 64
15 Gallon Floor 28 Hydra Hold Cleaning Water Cannon 65
55 Gallon Bulk 29-30 Flexshaft / Deck Scaler 66-67
Multi Tool Bulk 30 Other Marine Maintenance Tools 68-71
Accessories & Consumables 31

Novastrip - Infrared Tile Heaters 32

Novastrip 1026 - 6 sq ft. Foot Print 33
Novastrip 378 - 2 sq ft. Foot Print 34
Eco Strip 100 - 1 sq ft. Foot Print 34

2
 Air Filtration

Novatek’s innovative range of air filtration products offers class leading performance,
durability, and ease of maintenance. With a variety of sizes, configurations and filters, Novatek
has the machine to cover your application. Our roto-molded cabinets and “mold-in” graphics
enable us to produce machines that are customized to your color, company and brand.

Portable Filtration

Ventilation

Choosing the Right Equipment

1st Step: Application 2nd Step: Configuration
• Abatement • Air Scrubbing • Horizontal: Air intake in the front, filters out
the back. HEPA or general purpose filtration
• Nuisance Dust • Ventilating
• Vertical: Air intake on the top, exhausts from
• Restoration • Duct Cleaning the back. HEPA or general purpose filtration
• External Ducting • Non-filtered: Pass through ventilation

3rd Step: Air Volume Choose Accessories

• 2000 - 1000 CFM Filtered • Filter Type • Special Features
• 1000 - 500 CFM Filtered • Pre-Filter Type • Charcoal Filtration
• 600 CFM Filtered • Flange Doors • Ducting

• 800 CFM Air Mover • ULPA • HEPA

3
 Air Filtration

Novatek’s innovative range of air filtration products offers class leading performance,
durability, and ease of maintenance. With a variety of sizes, configurations and filters, Novatek
has the machine to cover your application. Our roto-molded cabinets and “mold-in” graphics
enable us to produce machines that are customized to your color, company and brand.

Portable Filtration

Ventilation

Choosing the Right Equipment

1st Step: Application 2nd Step: Configuration
• Abatement • Air Scrubbing • Horizontal: Air intake in the front, filters out
the back. HEPA or general purpose filtration
• Nuisance Dust • Ventilating
• Vertical: Air intake on the top, exhausts from
• Restoration • Duct Cleaning the back. HEPA or general purpose filtration
• External Ducting • Non-filtered: Pass through ventilation

3rd Step: Air Volume Choose Accessories

• 2000 - 1000 CFM Filtered • Filter Type • Special Features
• 1000 - 500 CFM Filtered • Pre-Filter Type • Charcoal Filtration
• 600 CFM Filtered • Flange Doors • Ducting

• 800 CFM Air Mover • ULPA • HEPA

3
Air Filtration

Novair 2000
Portable Air Filtration for use in abatement,
Powerful with High Volume hospitals, air scrubbing, or anywhere dust
is a concern. Available in a variety of
power and filter configurations.

Features Benefits
• True 2000 cubic feet per minute air movement • Move the same air with fewer machines
with all filters installed • Extended filter life due to the high hp blower draws
• Powerful 2 hp motor, the most powerful more debris deeper into the filter media
in its class • Light and compact, fits through standard doorways
• Horizontal configuration • Replacement filters readily available
• Uses standard 24x24x11.5 HEPA filters • Filters for hazardous material or nuisance dust
• Available with HEPA, ULPA or nuisance dust filters • Dent proof, leak proof, polyethylene, light weight and
• Polyethylene shell is seamless and dent proof virtually indestructible
• 2 or 3 speed configuration • Easy to decontaminate or clean
• Integrated molded carrying handles
• Caster nest for stacking
• Custom colors and labeling available

Model Part No. Weight Dimensions Motor Air Volume Power Filtration
LxWxH High/Low Requirements
NOVAIR 2000 F2100 135 lbs 37”x26”x31” 2 hp-Two Speed, 2000-1000 CFM 115 Volt, HEPA Filter, 1/2” Pad,
c/w HEPA filter 61kg 94x66x79 cm Thermally Protected 3400-1700 m3/hr 15 Amp, 60 Hz Ring Filter
NOVAIR 2000 F2102 135 lbs 37”x26”x31” 2 hp-Two Speed, 2000-1000 CFM 115 Volt, HEPA Filter 1/2” Pad,
c/w HEPA, Audible & 61kg 94x66x79 cm Thermally Protected 3400-1700 m3/hr 15 Amp, 60 Hz Ring Filter
Visual Alarms
NOVAIR 2000 F2105 118 lbs 37”x26”x31” 2 hp-Two Speed, 2000-1000 CFM 115 Volt, Dust Filter, 1/2” Pad,
c/w General Purpose Filter 54kg 94x66x79 cm Thermally Protected 3400-1700 m3/hr 15 Amp, 60 Hz Ring Filter
NOVAIR 2000 F2200 135 lbs 37”x26”x31” 2 hp-Two Speed, 2000-1000 CFM 220 Volt, 8 Amp HEPA Filter, 1/2” Pad,
c/w HEPA filter 61kg 94x66x79 cm Thermally Protected 3400-1700 m3/hr 50 or 60 Hz Ring Filter
NOVAIR 2000 F2202 135 lbs 37”x26”x31” 2 hp-Two Speed, 2000-1000 CFM 220 Volt, 8 Amp HEPA Filter, 1/2” Pad,
c/w HEPA, Audible & 61kg 94x66x79 cm Thermally Protected 3400-1700 m3/hr 50 or 60Hz Ring Filter
Visual Alarms
NOVAIR 2000 F2205 118 lbs 37”x26”x31” 2 hp-Two Speed, 2000-1000 CFM 220 Volt, 8 Amp Dust Filter, 1/2” Pad,
c/w General Purpose Filter 54kg 94x66x79 cm Thermally Protected 3400-1700 m3/hr 50 or 60 Hz Ring Filter

4
 Air Filtration

Novair 1000
Special Available Features: for all sizes and
models, hour meters, filter auto cut-off, Compact and Maneuverable
audible/visual alarm, international plug
configurations and customizable colors.

Features Benefits
• True 1000 cubic feet per minute air movement • Smooth, consistent air flow
with all filters installed • Extended filter life, due to motor pulling more
• Powerful 1 hp motors particulates deep into the filter
• Vertical configuration with small footprint • Perfect for tighter areas.
• Utilizes standard HEPA filters or nuisance dust filters
• Replacement filters are readily available
• Polyethylene shell for durability
• 2 or 3 speed motor • Available with HEPA, ULPA or nuisance dust filters
• “Hand truck” configuration features non-marring skid • Dent proof, leak proof, polyethlene, lightweight and
allows for easy transport by one operator virtually indestructible
• Compact upright design is perfect for tight spaces • Easy to decontaminate and clean

Model Part No. Weight Dimensions Motor Air Volume Power Filtration
WxDxH High/Low Requirements
NOVAIR 1000 F1000 94 lbs 20” x 23” x 40” 1 hp - Two Speed, 1000-500 CFM 115 Volt, HEPA Filter, 1/2”
c/w HEPA Filter 42 kg 51 x 58 x 102 cm Thermally Protected 1700-850 m3/hr 5 Amp, 60 Hz Pad, Ring Filter
NOVAIR 1000 F1002 94 lbs 20” x 23” x 40” 1 hp - Two Speed, 1000-500 CFM 115 Volt, HEPA Filter, 1/2”
c/w HEPA, Audible 42 kg 51 x 58 x 102 cm Thermally Protected 1700-850 m3/hr 5 Amp, 60 Hz Pad, Ring Filter
Visual Alarms
NOVAIR 1000 F1005 91 lbs 20” x 23” x 40” 1 hp - Two Speed, 1000-500 CFM 115 Volt, Dust Filter, 1/2”
c/w General Purpose Filter 41 kg 51 x 58 x 102 cm Thermally Protected 1700-850 m3/hr 5 Amp, 60 Hz Pad, Ring Filter
NOVAIR 1000 F1200 94 lbs 20” x 23” x 40” 1 hp - Two Speed, 1000-500 CFM 220 Volt, 2.5 Amp HEPA Filter, 1/2”
c/w HEPA Filter 42 kg 51 x 58 x 102 cm Thermally Protected 1700-850 m3/hr 50 or 60 Hz Pad, Ring Filter
.
NOVAIR 1000 F1202 94 lbs 20” x 23” x 40” 1 hp - Two Speed, 1000-500 CFM 220 Volt, 2.5 Amp HEPA Filter, 1/2”
c/w HEPA, Audible 42 kg 51 x 58 x 102 cm Thermally Protected 1700-850 m3/hr 50 or 60 Hz Pad, Ring Filter
Visual Alarms
NOVAIR 1000 F1205 91 lbs 20” x 23” x 40” 1 hp - Two Speed 1000-500 CFM 220 Volt, 2.5 Amp Dust Filter, 1/2”
c/w General Purpose Filter 41 kg 51 x 58 x 102 cm Thermally Protected 1700-850 m3/hr 50 or 60 Hz Pad, Ring Filter

5
Air Filtration

Duravent
High performance Axial Blower
Compact & Durable
with integrated 25’ vinyl ducting
and case. Can be easily configured
to ventilate or extract air. Perfect
for confined spaces where air
movement is critical.

Features Benefits
• True 865 cubic feet per minute air movement • Moves large volumes of air with compact design
• Powerful 1/3 hp motor • Maintain power for consistant air flow
• Horizontal configuration • Versatile design, two machines in one
• Easily converts to ventilate or extract air • Orange ducting is acceptable for military uses
• Safety orange ducting, acceptable for military • Dent proof, leak proof, polyethylene, light weight
applications and virtually indestructible
• Polyethylene shell is seamless, dent proof, • Handles are molded into the housing, with no
and light-weight hinges or break points
• Integrated molded carrying handles
• 25ft. ducting integrated in carrying case

Model Part No. Length Width Height Weight Power Free Air

Duravent V1000 34” 12” 14” 39 lbs 110 V 865 CFM

with 25’ Ducting 86 cm 30 cm 36 cm 17.3 kg 60 Hz 2.4 Amp 1500 M3hr

Duravent V1001 34” 12” 14” 39 lbs 230 V 865 CFM

with 25’ Ducting 86 cm 30 cm 36 cm 17.3 kg 50/60 Hz 1.3 Amp 1500 M3hr

6
 Air Filtration

Duct-2-Go
Heavy Duty Vinyl Ducting with an
integrated carrying case for ease
Ultimate Portability
of transport and storage. The
perfect accessory for our Novair
line of products.

Features Benefits
• 10” and 12” diameters available • Different diameters and lengths for a wide range
of applications
• 25’ and 50’ lengths available
• Heavy duty vinyl casing • Heavy vinyl material resists rips and tears for long life
• Integrated carrying handle • Easily transported with integrated handles
• Safety orange color • Packs up or retracts in seconds
• Integrated fastening straps • Safety orange for shipyard and Naval applications
• Easy to store in tight space due to attached
storage bag

- Model Part No. Duct Diameter Duct Length

Duct-2-Go 10” D1025 10 inch (25 cm) 25 ft. (7.5 m)

Duct-2-Go 10” D1050 10 inch (25 cm) 50 ft. (15 m)

Duct-2-Go 12” D1225 12 inch (30 cm) 25 ft. (7.5 m)

Duct-2-Go 12” D1250 12 inch (30 cm) 50 ft. (15 m)

7
Air Filtration
Accessories & Consumables

Fall 2014
(Coming to a distributor near you.)
Novair 600 Capture Point
Everything you have come Remote dust recovery utilizing your Novair.
to expect from the newest Captures dust at “The point of generation”
Novair Model.
Class leading performance,
features and durability

Features & Benefits

• Small compact design 600 CFM
• Durable polyethylene shell
• Perfect for restoration and remodeling
• Easily stackable
• Light weight and easy to carry
• Uses standard filter sizes
Features & Benefits
• Available with HEPA, ULPA, or Nuisance Dust filter
• Ideal for small containment areas • Sets up in seconds
• Easy to clean and decontaminate • Lightweight
• Integrated handle • 25’ ducting included
• Integrated GFCI outlet • Remote pickup, keeps machine clean
• Daisy chain up to 4 Machines • Turn-key with included clamps
• Variable speed 100-600 cfm • Works with any 12” exhaust port
• Low amp draw

Air Filtration Accessories

Part - F4015 Part - F4035
Ring Filter - Novair 2000 Ring Filter - Novair 1000
• 24”x 24” • 16”x 16”

Part - F4020 Part - F4036

Pad Filter - Novair 2000 Pad Filter -Novair 1000
• 24”x 24” • 16”x 16”

Part - F4018, F4019 Part - F4038, F4039

Charcoal Filter - Novair 2000 Charcoal Filter - Novair 1000
Odor and fume control Odor and fume control
• 24”x 24” • 16”x 16”
• 1/2” thick - F4018 • 1/2” thick - F4038
• 1” thick - F4019 • 1” thick - F4039

8
 Air Filtration
Accessories & Consumables

Part - F4010 Part - F4030

HEPA Filter - Novair 2000 HEPA Filter - Novair 1000
• 24”x 24”x 11.5” • 16”x 16”x 11.5”
• 99.97% at 0.3 micron • 99.97% at 0.3 micron

Part - F4012 Part - F4030F

Metal Frame HEPA Filter - Metal Frame HEPA Filter -
Novair 2000 Novair 1000
• 24”x 24”x 11.5” • 16”x 16”x 11.5”
• 99.99% at 0.3 micron • 99.99% at 0.3 micron

Part - F4011 Part - F4031

ULPA Filter - Novair 2000 ULPA Filter - Novair 1000
• 24”x 24”x 11.5” • 16”x 16”x 11.5”
• 99.999% at 0.1 micron • 99.999% at 0.1 micron

Part - F4013 Part - F4030H

V Pack HEPA Filter - Novair 2000 V Pack HEPA Filter - Novair 1000
• 24”x 24”x 11.5” • 16”x 16”x 11.5”
• 99.999% at 0.3 micron • 99.999% at 0.3 micron

Part - F4000 Part - F4040

General Purpose Filter Kit - General Purpose Filter Kit -
Novair 2000 Novair 1000
• 24”x 24” • 16”x 16”
• 3 Ply filtrates to 0.5 microns • 3 Ply filtrates to 0.5 microns

Part - F4005 Part - F4045

General Purpose General Purpose
Replacement Filter - Novair 2000 Replacement Filter - Novair 1000
• 24”x 24” • 16”x 16”
• 3 Ply filtrates to 0.5 microns • 3 Ply filtrates to 0.5 microns

Part - F2012 Part - F1028

Flanged Intake Door - Novair 2000 Flanged Intake Door - Novair 1000
• 24”x 24” - 12”Ø • 16”x 16” - 12”Ø

9
VSE / Vacuum
Shrouded Equipment
The VSE range of surface preparation products is specifically designed for applications where dust control
and containment are critical. Lead-based paint removal, asbestos abatement, PCB removal and radiological
decontaminations are just a few of the many uses of this flexible range of products. Varied configurations
allow for effective materials removal from steel, concrete, and wood surfaces.

Application / Removal

Vacuum Shrouded Tools

Choosing the Right Equipment

1st Step: 2nd Step: Substrate
Application / Removal • Flat Steel Surface • Weld Seams
• Abatement • Corners and Angles-Steel • Steel Decking
• Nuisance Dust Control • Vertical Concrete • Lattice
• Concrete Preparation • Horizontal Concrete • Wood Frame
• Steel Cleaning • Structural Steel • Wood Panel
• Difficult Access • Door Jambs
• Cleaning Rivet Heads
• Cleaning Corners 3rd Step: Tools and Vacuums
• Cleaning Flat Surface Area
• Needle Scalers • Air Hammers
• Profiling
• Rotary Peening Tools • Drill Shrouds
• Heavy/Thick Coatings
• Hand-Held Scarifiers • HEPA Vacuums
• Drilling
• Right Angle Grinders • Floor Scarifiers
• Surface Profiling
• Floor Scabblers • Rotostrip/Wire Brush

10
 Vacuum Shrouded
Dustless Needle Scalers

Vacuum Shrouded, Dustless Needle Scalers are a must Part - 19NSVSE120

have for any/all critical, dustless application/
applications. These versatile tools work on irregular Lightweight & Compact
surfaces and allow access to difficult to reach areas.

Features
• Fully adjustable front vacuum take-off
• Flexible, interchangeable nose pieces
• Holds 19 x 3mm needles
• Chisel tip needles standard
• Standard 1.5” vacuum take-off
• All steel components
• 2mm needles available
Benefits
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles,
rivet heads, edges, piping and difficult areas
• Comfortable rubber pistol grip
• Specifically designed for abatement and remediation work
Part - 28NSVSE120
Features Maximum Impact & Power
• Flexible, interchangeable nose pieces for flat
surfaces, corners, and angles
• Powerful 2,200 blows per minute
• Fully adjustable front vacuum take-off
• Holds 28 x 3mm standard chisel tip needles
• All steel components
• Standard 1.5” vacuum take-off
• 2mm needles available

Benefits
• Novatek’s most powerful shrouded scaler
• Adjusts for irregular surfaces, corners, angles,
rivet heads, edges, piping and difficult areas
• Pistol grip offers operator comfort
• Specifically designed for abatement and remediation work *Tool package includes Needle Scaler,
Nose Pieces and 3mm Chisel Needle Pack

Model Part No. Needle Qty. Weight Length BPM Air Bore Stroke
Consumption
19PG VSE Needle Scaler 19NSVSE120 19 x 3 mm 5.7 lbs 12.4” 3000 5.5 cfm .925” 1.40”
Package 2.6 kg 315 mm 156 lpm 23 mm 35 mm
28PG VSE Needle Scaler 28NSVSE120 28 x 3 mm 8.8 lbs 13.5” 2200 6 cfm 1.125” 1.54”
Package 4.0 kg 342 mm 170 lpm 28 mm 39 mm

11
Vacuum Shrouded
Dustless Needle Scalers

Part - 19NSVSE110 Features

• Pistol grip, lightweight configuration for operator comfort
VRS-Vibration Reduced Scaler • Vibration dampening technology
• Holds 19 x 3mm needles
• Chisel tip needles standard
• Standard 1.5” vacuum take-off
• Fully adjustable front vacuum take-off
• Flexible, interchangeable nose pieces
• Tool-less needle change
• Light duty
• 2mm needles available
Benefits
• Ideal for abatement applications
• Light-weight for extended run times
• Adjusts for irregular surfaces, corners, angles,
rivet heads, edges, piping and difficult areas
• Works on irregular surfaces
• Reduced vibration for user comfort and safety
Part - 28NSVSE110
VRS-Vibration Reduced Scaler Features
• Maximum power, heavy-duty
• Holds 28 x 3mm needles
• Vibration dampening technology
• Pistol grip design
• Chisel tip needles standard
• Standard 1.5” vacuum take-off
• Fully adjustable front vacuum take-off
• Flexible, interchangeable nose piece
• 2mm needles available
• Tool-less needle change
Benefits
• Ideal for abatement applications
• Low vibration for operator safety and comfort
• Adjusts for irregular surfaces, corners, angles,
rivet heads, edges, piping and difficult areas
• Utilize standard 1.5” vacuum hose
• Same hitting power as our standard scaler

Model Part No. Needle Qty. Weight Length BPM Air Vibration
Consumption Level
19PG VSE VRS 19NSVSE110 19 x 3 mm 6.4 lbs (3 kg) 16.4” (410 mm) 3000 5 cfm (156 lpm) 2.76 M/S2
Needle Scaler Package
28PG VSE VRS 28NSVSE110 28 x 3 mm 7.8 lbs (4.0 kg) 16.7” (415 mm) 2200 6 cfm (170 lpm) 2.32 M/S2
Needle Scaler Package

12
 Vacuum Shrouded
Dustless Needle Scalers

Part - 19NSVSE120K, 19NSVSE110K, 28NSVSE120K, 28NSVSE110K

Kit Contains:
• Your choice of shrouded scaler
• Spare 3mm needle holder
• Spare anvil
• Spare return spring
• 100 pack of 3mm chisel tip needles
• Two additional flat and corner cuffs
• Spare 2mm needle holder
• 250 pack of 2mm needles
• All packaged in a rugged carry bag

- Model Part No. Needle Qty. Weight Length BPM Bore Stroke

19PG VSE 19NSVSE120K 19 x 3 mm 5.7 lbs 12.4” 3000 .925” 1.40”

Scaler Kit 2.6 kg 315 mm 23 mm 35 mm

19PG VSE 19NSVSE110K 19 x 3 mm 6.4 lbs 16.4” 3000 .925” 1.40”

Vibration Reduced Scaler Kit 3.0 kg 400 mm 23 mm 35 mm

28PG VSE 28NSVSE120K 28 x 3 mm 8.8 lbs 13.5” 2200 1.125” 1.54”

Scaler /Kit 4 kg 342 mm 28 mm 39 mm

28PG VSE 28NSVSE110K 28 x 3 mm 7.8 lbs 16.7” 2200 1.125” 1.54”

Vibration Reduced Scaler Kit 3.9 kg 415 mm 28 mm 39 mm

13
Roto Peen Tools

Part - RPT2AF/RPT2AC Novatek’s versatile, high production

Roto Peen / Hand-Held Scarifiers are ideal
Compact - Lightweight for removing coatings from both steel and
concrete surfaces. Quick change hubs with an
assortment of abrasives enable rapid removal
of mastics, alkyds to epoxy coatings while
containing hazardous or non-hazardous dust.

Features
• Available in 2” or 4” models
• Offered with 3M Roto Peen flaps or carbon steel cutters
• Lightweight but powerful 1.2 hp air motor
• Rollers allow for use on curved surfaces
• Integrated vacuum shroud
• Compact design for tighter access
Part - RPT4AF/RPT4AC • Quick change hubs and abrasives
• Available in kit form
Wide Cutting Path
Benefits
• 2” model is lighter and ideal for vertical and overhead use
• 4” model is best for horizontal surfaces
• High production rates
• Standard 1.5” vacuum port allows for dustless operation
• Converts in minutes to accept abrasive hubs for coating
and material removal from concrete or steel
• Complies with OSHA and EPA standards easily
when matched with our HEPA vacuums
• Replicates shot blast finish when equipped w/Roto Peen Flaps

Model Part No. Cutting Weight Length Overall Height RPM Air Air Voltage Power
Path Width Consum Pressure

2” Air w/ Flaps RPT2AF 2.4” 7.5 lbs 14” 6.25” 6” 3000 30 cfm 90 PSI N/A 1.2 hp
60 mm 3.4 kg 356 mm 159 mm 152 mm 840 lpm
2” Air w/ Cutters RPT2AC 2” 11.5 lbs 14” 6.25” 6” 3000 30 cfm 90 PSI N/A 1.2 hp
50 mm 5.2 kg 356 mm 159 mm 152 mm 840 lpm

2” Air RPT Kit RPT2AK 2.4” 18 lbs 14” 6.25” 6” 3000 30 cfm 90 PSI N/A 1.2 hp
60 mm 8.2 kg 356 mm 159 mm 152 mm 840 lpm
4” Air w/ Flaps RPT4AF 4.3” 9 lbs 14” 7.8” 6” 3000 30 cfm 90 PSI N/A 1.2 hp
110 mm 4.1 kg 356 mm 197 mm 152 mm 840 lpm

4” Air w/ Cutters RPT4AC 4” 14 lbs 14” 7.8” 6” 3000 30 cfm 90 PSI N/A 1.2 hp
100 mm 6.4 kg 356 mm 197 mm 152 mm 840 lpm

4” Air RPT Kit RPT4AK 4.3” 23 lbs 14” 7.8” 6” 3000 30 cfm 90 PSI N/A 1.2 hp
110 mm 10.4 kg 356 mm 197 mm 152 mm 840 lpm

14
 Roto Peen Tools

Features Part - RPT2EF/RPT2EC

• 2” or 4” cutting path
• Powerful 1200 watt electric motor
Compact
• Dust-free when used with VSE-HEPA vacuum systems
• Integrated rollers
• Quick change hubs and abrasives
• Works up to 1.5” from walls
• Converts from Roto Peen flaps to cutter hubs in minutes
(4” electric with cutters not available)

Benefits
• High production on decks, floors and walls
• Operates on standard 110 volt power
• Perfect for heavy coating removal
• High production on flat surfaces
• Works on curved surfaces and pipes
Part - RPT4EF
• Duplicates shot blast finish when equipped Wide Cutting Path
with Roto Peen flaps
• Complies with OSHA and EPA standards easily
when matched with our HEPA vacuums

Model Part No. Cutting Weight Length Overall Height RPM Air Air Voltage Power
Path Width Consum Pressure

2” Electric w/ Flaps RPT2EF 2.4” 10 lbs 20” 6.25” 6” 3000 N/A N/A 120 V 1200 W
60 mm 4.54 kg 500 mm 159 mm 152 mm 8 Amp
2” Electric w/ Cutters RPT2EC 2” 14 lbs 20” 6.25” 6” 3000 N/A N/A 120 V 1200 W
50 mm 6.4 kg 500 mm 159 mm 152 mm 8 Amp

2” Electric w/ RPT Kit RPT2EK 2.4” 23 lbs 20” 6.25” 6” 3000 N/A N/A 120 V 1200 W
60 mm 10.4 kg 500 mm 159 mm 152 mm 8 Amp
4” Electric w/ Flaps RPT4EF 4.3” 14 lbs 20” 7.8” 6” 3000 N/A N/A 120 V 1200 W
110 mm 6.4 kg 500 mm 197 mm 152 mm 8 Amp

15
Roto Peen Tools

Roto Peen/Hand-Held Scarifier Kits RPT Kits provide everything you need for a
wide variety of applications. From concrete
scarifying to light material removal, the
RPT Kit will have you covered.

Includes
• Your choice of 2” or 4” Air or 2” Electric tool • Rugged tool bag
loaded with Roto Peen hub and “Type C” flaps • Applicable wrenches
• Additional cutter hub loaded with carbon steel • Gear oil, (air model only)
“star” cutters (4” Electric Roto Peen unavailable in kit form)

Model Part No. Cutting Weight Length Width Height RPM Air Air Voltage Power
Path Consum Pressure

2” Air RPT Kit RPT2AK 2.4” 10 lbs 14” 14” 6” 3000 30 cfm 90 PSI N/A 1.2 hp
60 mm 8.2 kg 356 mm 356 mm 152 mm 840 lpm
4” Air RPT Kit RPT4AK 4.3” 23 lbs 14” 14” 6” 3000 30 cfm 90 PSI N/A 1.2 hp
110 mm 10.4 kg 356 mm 356 mm 152 mm 840 lpm

2” Electric RPT Kit RPT2EK 2.4” 23 lbs 20” 14” 6” 3000 N/A N/A 120 V 1200 W
60 mm 10.4 kg 500 mm 356 mm 152 mm 8 Amp

Part - RPTMRPC / RPTM212 (6 Pack of Flaps)

Roto Peen Flaps
Duplicates shot blast finish Applications/Features
• Coatings removal from steel or concrete, 20 to 25 mil removal
• Rust and scale removal
• Profiling and stress relief on steel
• Used to attain SSPC-SP 11 level of surface preparation
• Lightweight hubs dramatically decreases tool weight
compared to cutter hub
• Duplicates a blasting profile
• Achieves 2 to 3 mil profile

16
 Roto Peen Tools

Part - RPTS200
Carbon Steel “Star” Cutters
Applications/Features Our most aggressive cutter
• Aggressive coatings removal and surface prep
• Mid-weight cutter bundle
• Rust and scale removal
• Heavy coatings removal, epoxy. Non skid
• Concrete preparation and scarifying
• Plaster and stucco removal
• Recommended for 25+mil removal
Part - RPTS210 (Star Cutter 80 Pack)

Part - RPTR200
Applications/Features Carbon Steel “Beam” Cutters
• Mid-level coatings removal, Less aggressive cutter offers a long-life
(Less aggressive than “Stars”)
• Mid-weight cutter bundle
• Rust and scale removal
• Light concrete prep. and coatings removal
• Heavy coatings removal, epoxy non skid
• Concrete preparation and light resurfacing
• Plaster and stucco removal
• Recommended for 25+mil removal
Part - RPTR210 (Beam Cutter 60 Pack)

Part - RPTH276 / RPTH476 Part - RPTU278/RPTU478

• Roto Peen hub complete with • Cutter hub replacement
pins 2” & 4” pins 2” & 4”

Part - RPTH278 / RPTH478

• Star hub complete with
pins 2” & 4”

17
RotoStrip /
Surface Preparation Tool

Part - Roto100 RotoStrip Tool Novatek’s RotoStrip is the perfect tool for
the removal of coatings, corrosion, scale
and filler. Varied abrasives offer flexibility
for numerous jobs. Perfect for work on
pipelines, steel structures, weld cleaning
and auto applications.

Features/Benefits
• Wide range of abrasives allow for use in
industrial, contracting and automotive applications
• Efficient air motor allows for operation using
small, portable compressors
• Quick change replacement hubs
• Effective lightweight design
• Integrated dust shroud controls airborn dust
• Ergonomic grip insulates from cold and vibrations
• Eliminates the need for complex blast cleaning
• Works on wood surfaces
Sold with 23mm hub and coarse bent 0.7 belt

Part - Roto101 RotoStrip Industrial Kit / Roto102 RotoStrip Auto Body Kit
Industrial Kit Includes:
• Shrouded Rotostrip Tool
• 1pc of 11mm & 23mm hub assembly
• 2pcs of coating removal assembly
• 5pcs of 23mm steel brushes
• 5pcs of 11mm steel brushes
• Supplied in a rugged tool bag

Auto Body Kit Includes:

• Shrouded Rotostrip Tool
• 1pc of 11mm & 23mm hub assembly
• 2pcs of eraser wheel assembly
• 2pcs of coating removal assembly
• 2pcs of 23mm replacement eraser
Auto Body Kit shown • Supplied in a rugged tool bag

Model Part No. Weight Length Height RPM Air Consumption Noise Vibration
90psi Level

RotoStrip ROTO100 2.8 lbs (1.5kg) 13” (330 mm) 6” (152 mm) 4000 4 cfm (113 lpm) 80 db 0.5 M/S
Industrial Kit ROTO101 5 lbs (2.3kg) 13” (330 mm) 6” (152 mm) 4000 4 cfm (113 lpm) 80 db 0.5 M/S
Auto Kit ROTO102 5 lbs (2.3kg) 13” (330 mm) 6” (152 mm) 4000 4 cfm (113 lpm) 80 db 0.5 M/S

18
 RotoStrip /
Surface Preparation Tool

Part - ROTO400 Part - ROTO413

Heavy Duty 11mm Hub 11mm Wide Steel Brush
Bent tip, coarse 0.7mm

Part - ROTO401 Part - ROTO414

Heavy Duty 23mm Hub 11mm Wide Steel Brush
Bent tip, coarse 0.5mm

Part - ROTO405 Part - ROTO415

Replaceable Eraser 11mm Wide Steel

Removes decals, pin striping, Straight tip, coarse 0.5mm
vinyl, adhesives

Part - ROTO423
Part - ROTO406
23mm Wide Steel
Complete Eraser Wheel Assembly Bent tip, coarse 0.7mm
No extended downtime
hub included in assembly
Removes decals, pin striping,
vinyl, adhesives Part - ROTO424
23mm Wide Steel
Part - ROTO410 Bent tip, coarse 0.5mm
Coating Removal Wheel Assembly
Remove residual coatings or
impacted corrosion without losing Part - ROTO425
the surface profile 23mm Wide Steel
Non loading, open web design Straight, coarse 0.5mm

* Available in stainless steel, straight or bent; 11 or 23mm

19
Vacuum Shrouded
Grinders

Part - SRAT5A, SRAT7A

Novatek’s Dust-Free Grinders/Sanders
Right Angle Grinders are built for the most demanding
applications. Grind steel or concrete
virtually dust free. Multiple disks and
power configurations allow for an exact
configuration to suit your project.

Features
• 5” & 7” models available
• Choice of compressed air or electric power sources
• Powerful 1200 watt motor (electric only),
or a 1.2 hp compressed air drive motor
• Floating dust shrouds maintain vacuum seal
• Replaceable nylon wear skirts
Part - SRAT5E, SRAT7E • Side handle included
• Utilizes a wide assortment of abrasives
Right Angle Grinders
Benefits
• Multiple sizes for varied work
• Powerful drive units maintains speed to maximize
production
• Floating shrouds conform to work surface for
dustless operation
• Disposable wear skirts save shroud from wear
• Side handle allows for operator comfort
• Standard 5/8” x 11’ arbor allows for the use of a
wide range of abrasives

Model Part No. Working Weight RPM Air Air Voltage Power
Width Consumption Pressure

5” Electric SRAT5E 5” 10 lbs 0-3000 N/A N/A 120 V 1200 W

Shrouded Grinder 127 mm 4.5 kg 8 Amp

5” Air SRAT5A 5” 7.5 lbs 5500 30 cfm 90 PSI N/A 1.2 hp

Shrouded Grinder 127 mm 3.4 kg 840 lpm

7” Electric SRAT7E 7” 14 lbs 0-3000 N/A N/A 120 V 1200 W

Shrouded Grinder 177 mm 6.4 kg 8 Amp

7” Air SRAT7A 7” 11.5 lbs 5500 30 cfm 90 PSI N/A 1.2 hp

Shrouded Grinder 177 mm 5.2 kg 840 lpm

20
 Grinders, Abrasives
& Backing Pads

Part - SRATM104 Part - SRATP010

4” Hook and Loop 5”- 40 Grit Aluminum Oxide
Backing Pads, 5/8” x 11 Grinding Disk
Used with Hook and Loop abrasives Strips coatings and grinds steel
Used with 5” Hook and Loop backing pad

Part - SRATM004 Part - SRATP105

4” Coatings Removal Disc 5” Silica Carbide
Aggressive painting and coatings removal Backing Pad, 5/8” x 11
Used with 4” Hook and Loop backing pad Used with silica carbide grinding discs
Includes retaining nut

Part - SRATM105 Part - SRATP005

5” Hook and Loop 5” Silica Carbide
Backing Pad, 5/8” x 11 Grinding / Rip Disc
Used with Hook and Loop abrasives Aggressive steel and concrete grinding
Used with 5” silica carbide backing pad

Part - SRATM005 Part - SRATM107

5” Coatings Removal Disc / Black 7” Hook and Loop
Aggressive painting and coatings removal Backing Pad, 5/8” x 11
Used with 5” Hook and Loop backing pad Used with Hook and Loop abrasives

Part - SRATM015 Part - SRATM007

5” Max Duty Coatings 7” Coatings Removal
Removal Disc / Purple Disc / Black
Most aggressive painting and coating removal Aggressive painting and coatings removal
Used with 5” Hook and Loop backing pad Used with 7” Hook and Loop backing pad

Part - SRATR509 Part - SRATM017

5” Medium Surface 7” Max Duty Coatings
Conditioning Disc /Medium Removal Disc / Purple
Remove light coatings and fine de-burring Most aggressive painting and coatings removal
Used with Hook and Loop backing pad Used with 7” Hook and Loop backing pad

Part - SRATR510 Part - SRATP107

5” Coarse Surface 7” Silica Carbide Backing
Conditioning Disc / Coarse Pad, 5/8” x 11
Removes heavier coatings and aggressive de-burring Used with silica carbide grinding discs
Used with Hook and Loop backing pad Includes retaining nut

Part - SRATP011 Part - SRATP007

5”- 60 Grit Aluminum Oxide 7” Silica Carbide
Grinding Disk Grinding / Rip Disc
Strips coatings and grinds steel Aggressive steel and concrete grinding
Used with 5” Hook and Loop backing pad Used with 7” silica carbide backing pad

21
Dust Shrouds -
Universal Fit

Part - SRATU005 / SRATU007 Universal Dust Shrouds allow you to

Universal Grinder/Sander Shroud convert your existing drills and grinders
to “Dust-Free” in minutes.

Features
• Floating head insures contact with work surface
• Universal “Quick Fit” collar
• Replaceable wear skirt
• Heavy duty & lightweight aluminum cast shroud
• Available in 5” and 7” sizes

Model Part No. Ring Size ID Tools to Fit Model Part No. Ring Size ID Tools to Fit

5” Enclosed Shroud SRATU005 1.7” or 2” B&D, Makita, Bosch, 7” Enclosed Shroud SRATU007 1.7” or 2” B&D, Makita, Bosch,
Dewalt, Metabo Dewalt, Metabo

Part - DDS3000
DDS-1” Drill Shroud
Features
• Universal “Quick Fit” mount
• Accepts bits up to 1”
• Adjustable shroud maintains containment
• Utilizes steel, wood, concrete or spade style bits
• Lightweight ABS construction

Model Part No. Bit Width Drill Depth

DDS-1 Dustless Drill Shroud DDS3000 Up to 1” Up to 4”

Part - DDS3100
DDS-3” Drill Shroud Features
• Accepts all bits up to 3”
• Universal mounting collar
• Specialized collar exclusively for the “Hole Hawg”TM
available
• Spring loaded design maintains containment
• Perfect for concrete, siding, or any sensitive area
• Rubber bellows included for extended length bits
• Heavy duty steel construction

Model Part No. Bit Width Drill Depth

DDS-3 Dustless Drill Shroud DDS3100 Up to 3” Up to 4”

DDS-3 “Hole Hawg” Collar Adapter DDS3200 - -

22
 Vacuum Shrouded
Scaling / Air Hammers

Part - PHS1VSEHDS / PHS1VSEHDL

Vacuum Shrouded Scaling Hammers
are heavy duty percussive tools, Single Head
designed to fracture high-build
coatings, non-skid, concrete and
laminar rust.

Features & Benefits

• Perfect for tight access
• Hard hitting 2500 blows per minute
• Tungsten carbide heads for long life
• Single piece piston and tip assures durability
• Nylon brush seals keep piston and cylinders clean
• Available with short or long handle
• Dustless when equipped with proper vacuum
• Bush hammer or cruciform tips available
• Used on steel or concrete
Part - PHS3VSEHDS / PHS3VSEHDL
Triple Head
Features & Benefits
• Triple heads work at 7500 blows per minute
• More coverage for larger areas
• Tungsten carbide heads for long life
• Dual air inlets allow for inline or T set-ups
• Removable side handle for ease of operation
• Available with short or long handle
• Dustless when equipped with proper vacuum
• Bush hammer or cruciform tips available
• Used on steel or concrete

* Bush Hammer Heads and Cruciform Heads available See page 52 for product details.

Model Part No. Weight Length BPM Air Cylinder Piston

Consumption Bore Stroke

Shrouded Heavy Duty PHS1VSEHDS 9 lbs 9” 2500 6.5 cfm 1.06” 1.04”
Single Scaler-Short Handle 4.1 kg 229 mm 186 lpm 28 mm 26 mm

Shrouded Heavy Duty PHS1VSEHDL 10 lbs 18” 2500 6.5 cfm 1.06” 1.04”
Single Scaler-Long Handle 4.6 kg 457 mm 186 lpm 28 mm 26 mm

Shrouded Heavy Duty PHS3VSEHDS 13 lbs 9” 3 x 2500 14 cfm 1.06” 1.04”

Triple Scaler-Short Handle 5.9 kg 229 mm 408 lpm 28 mm 26 mm

Shrouded Heavy Duty PHS3VSEHDL 14 lbs 18” 3 x 2500 14 cfm 1.06” 1.04”
Triple Scaler-Long Handle 6.4 kg 457 mm 408 lpm 28 mm 26 mm

23
Vacuum Shrouder
Dustless Deck Scaler

Part - PDS11VSE
Heavy Duty 11 Head Deck Scaler
Applications
• For the removal of coatings, scale, and pack rust from
steel decking. Compact and powerful, this is the perfect
machine for use in difficult to access areas
Features & Benefits
• Powerful 27,500 combined blows per minute
• Compact body, less than 12”, allows for work
between and under structures
• Air efficient, requires only 50 CFM @ 90 PSI
• Heavy Duty Tungsten Carbide heads provide long life
• Lightweight at 82 lbs
• Vacuum shrouding for dust control available
• Great for steel application
• 1.5” integrated vacuum port on shroud
• Low profile-collapsible handle
• Vibration dampening block technology

Part - PHS431B Part - PHS431C Part - PDS430

Bush Hammer Head Cruciform Head Piston Threaded
Applications Applications
• Removes loose • Rapid take-down
material on steel of rust
• Steel prep decking • Coatings removal
before blasting from steel
• Non-skid and epoxy
• Pack rust and laminar
rust removal

Available in Kits to include

• PFS431BK - 11 Bush Hammer Heads and 11 Brush Seals
• PFS431CK - 11 Cruciform Heads and 11 Brush Seals

Model Part No. Weight Length BPM Air Cutting Path Working
Consumption Pressure
NDS 11 Deck Scaler PDS11VSE 82 lbs (37 kg) 11.4” (290 mm) 27,500 50 cfm 10” (252 mm) 90 PSI
w/ Dust Collection (11 x 2500) 1560 lpm

24
 Vacuum Shrouded
Dustless Floor Scabbler

Part - PFS11VSE
Applications Super Duty 11 Head Floor Shrouded Scabbler
• Our most aggressive scabbler. Heavy duty
scabbling for quick take down of coatings
and concrete. Perfect for haz mat removal
when equipped with our dust collection shroud.

Features & Benefits

• Tungsten carbide heads for aggressive removal
and long life
• Fractures coatings without damaging to the substrate
• 24,200 combined blows per minute
• Cruciform head or bush heads available
• 150 lb block
• Vibration dampening technology
• Collapsable handle
• Available dust shrouds for work in hazardous
environments, including radiological decontamination
• 2” Vacuum port integrated in the shroud

Part - PFS450B Part - PFS450C Part - PFS442

Bush Hammer Head Cruciform Head Piston
Applications Applications
• Texturizing concrete • Rapid take-down
• Aggregate exposure for of concrete
bonding overlayments • Coatings removal
• Removes loose from steel or concrete
material for concrete • Non-skid and epoxy
crack and joint repair • Pack rust and laminar
rust removal

Available in Kits to include

• PFS450BK - 11 Bush Hammer Heads and 11 Brush Seals
• PFS450CK - 11 Cruciform Heads and 11 Brush Seals

Model Part No. Weight Length BPM Air Cutting Path Working
Consumption Pressure

NFS 11 Scabbler PFS11VSE 160 lbs (73 kg) 13.4” (340 mm) 24,200 70 cfm 11.2” (285 mm) 90 PSI
w/ Dust Collection (11 x 2200) 1982 lpm

25
Vacuums
Novatek offers a complete line of Pneumatic and Electric HEPA Vacuums, specifically
designed to work with our VSE product line. Choose between backpack, floor, or bulk
collection units. These systems are engineered for the recovery of lead, asbestos, mold,
and other hazardous or non-hazardous materials.

Floor Vacuums

Drum Top Vacuums Component Vacuums Backpack Vacuums

Choosing the Right Equipment

1st Step: Application 2nd Step: Materials for Pick-Up

• Dry material collection • Hazardous materials • Water and slurry
• Wet pick-up collection • Non-hazardous materials • Dense material, grit
• Confined spaces
• Bulk collection requirement 3rd Step: Vacuum Selection
• Compressed air availability • 3.3 Gallon Backpack Air or Electric HEPA
• Electric availability • 15 Gallon Floor Air or Electric HEPA
• Vacuum blast recovery • 55 Gallon Drum Top Air or Electric
• 55 Gallon Component Vacuum

26
 HEPA Vacuums

Novatek offers a range of Pneumatic Part - VA03ABK

and Electric HEPA Vacuums, specifically 3.3 Gallon HEPA Air Backpack
designed to work with our VSE product line.
Choose between backpack, floor, or bulk
collection units. Engineered for the recovery
of lead, asbestos, mold, and other
hazardous or non-hazardous materials.

Applications
• Use in difficult to access areas
• Perfect for attaching to scaffolding or boom trucks
• Haz Mat removal and recovery
Features & Benefits
• Your choice of powerful pneumatic or electric models
• Ultimate portability
• Perfectly matched to our VSE power tools
• 3.3 gallon steel recovery tank
• 4 stage filtration assures long HEPA life
• Can be converted from backpack to floor vac in seconds
Part -VAO3EBK
• Individually tested and certified HEPA filters
• Air filter/dryer standard (pneumatic model only) 3.3 Gallon HEPA Electric Backpack
• Includes 6’ x 1.5” of crush proof vacuum hose
• Integrated live air inlet with shutoff for
connecting power tools

Air Backpack model with RotoPeen tool removing

rust from a steel structure.

Model Part No. CFM Static Lift Air Recovery Maximum

Output Flow Inches of Water Consumption Capacity Hose Length

3.3 Gallon Air Backpack Vacuum VA03ABK 170 160” 50 CFM @ 90 PSI 3.3 Gal 75 ft. x 1.5”

3.3 Gallon Electric Backpack Vacuum VA03EBK 110 110” 120 Volts, 60 Hz 3.3 Gal 25 ft. x 1.5”
11 Amps

27
HEPA Vacuums

Part - VA15AHFL
15 Gallon Air Floor Vacuum
Applications
• High capacity cleanup
• Liquid pickup with optional wet/dry adapter
• Haz Mat removal and recovery
• Perfectly matched for our VSE power tool systems

Features & Benefits

• Your choice of powerful pneumatic or electric models
• 15 gallon rolled steel recovery tank
• 4 stage filtration assures long HEPA life
• Individually tested and certified HEPA filters
• Front swivel casters, large rear wheels for easy transport
• Air filter/dryer standard (pneumatic model only)
• 25’ heavy duty power cord (electric models only)
• Includes 10’ x 1.5” of crush proof vacuum hose
• Optional wet/dry adapter
Part - VA15EHFL
15 Gallon Electric Floor Vacuum

Electric model with Roto Peen tool removing coating

on concrete

Model Part No. CFM Static Lift Power Recovery Maximum

Output Flow Inches of Water Consumption Capacity Hose Length

15 Gallon Air Floor Vacuum VA15AHFL 170 160” 50 CFM @ 90 PSI 15 Gal 75 ft. x 1.5”

15 Gallon Electric Floor Vacuum VA15EHFL 110 110” 120 Volts, 60 Hz 15 Gal 25 ft. x 1.5”
125 Amps

28
 HEPA Vacuums

Part - VA55A1P
55 Gallon Air Drum Adaptor
Applications
• High capacity clean-ups
• Bulk Haz Mat recovery
• Slurry clean up
• Use with our range of VSE power tools

Features & Benefits

• 55 gallon recovery, dry bulk
• Powerful air or electric vacuum generators
• 4 stage filtration assures long HEPA life
• Wet/dry pick-up standard
• Inline air filter dryer is standard (air model only)
• Individually tested and certified HEPA filters
• Includes 25’ Vacuum hose, 2 pre-filters and
5 collection bags
• Perfectly matched for our VSE power tool systems
Part - VA55E1P
55 Gallon Electric Drum Adaptor

The custom HEPA filter, with disposable prefilter

can be easily removed for cleaning.

Model Part No. CFM Static Lift Air Consumption Recovery Maximum
Output Flow Inches of Water & SCFM Capacity Hose Length

55 Gallon Air Wet/Dry Vacuum VA55A1P 170 160” 50 CFM @ 90 PSI 35/55 Gal 75 ft. x 1.5”

55 Gallon Electric Wet/Dry Vacuum VA55E1P 110 110” 120 Volts, 60 Hz 35/55 Gal 25 ft. x 1.5”
125 Amps

29
HEPA Vacuums

Part - VA55A2V3P Bulk Collection Vacuums are the perfect

55 Gallon Dual Air Drum Adaptor choice for large recovery requirements.
Vacuums to run up to 8 shrouded tools.
Choose the system that suits your needs.

Applications
• Vacuum recovery of up to 3 VSE power tools
• Bulk material recovery
• Haz Mat clean-up
• Wet Dry applications requiring HEPA filtration
Features & Benefits
• Dual vacuum generators create maximum flow and suction
• Air filter/dryer and wet/dry pick-up standard
• Strong enough to convey heavy, dense materials
• Can be configured into a three port or single port vacuum
• 4 stage filtration assures long HEPA life
• Individually tested and certified HEPA filters
• Includes 3 sections of 25’ crush proof 1.5” vacuum hose

Model Part No. CFM Static Lift Air Consumption Recovery Maximum
Output Flow Inches of Water & CFM Capacity Hose Length

Dual Venturi, 3 Port, Air Vacuum VA55A2V3P 340 160” 110 CFM @ 90 PSI 35/55 Gal 3 x 50’ x 1.5”

Part - CBS000A, CBS000B, CBS000C, CBS000D

Multi-Tool Blast Recovery Vacuum Features & Benefits
• Systems allow use of 4-8 vacuum equipped power tools
• Perfect for vacuum blast recovery
• Powerful vacuum pump allows for the conveyance of
the most dense materials
• Component system breaks down for easy transport
• Heavy duty cartridge filter comes standard
• HEPA filter stage available
• Adapts to your existing blast equipment to
transform into a contained blast system

Model Part No. CFM Static Lift Air Consumption Recovery Maximum # of Vacuum
Output Flow Inches of Water & CFM Capacity Hose Length Ports
CBS Kit “A” 1 Pump Collection System CBS000A 360 cfm 163” 200 CFM @ 100 PSI 35/55 Gal 4 pcs-50’ x 1.5” Up to 4 Ports
Up to 100’ Vac Hose
CBS Kit “B” 2 Pump Collection System CBS000B 720 cfm 163” 400 CFM @ 100 PSI 35/55 Gal 8 pcs-50’ x 1.5” Up to 8 Ports
Up to 200’ Vac Hose
CBS Kit “C” 1 Pump Collection System CBS000C 360 cfm 163” 200 CFM @ 100 PSI 35/55 Gal 4 pcs-50’ x 1.5” Up to 4 Ports
with HEPA Filtration Up to 100’ Vac Hose
CBS Kit “D” 2 Pump Collection System CBS000D 720 cfm 163” 400 CFM @ 100 PSI 35/55 Gal 8 pcs-50’ x 1.5” Up to 8 Ports
with HEPA Filtration Up to 200’ Vac Hose

30
 HEPA Vacuums/
Accessories & Consumables

Backpack Accessories Part - VAC3310 Floor Vac Accessories Part - VAC15010

12” HEPA Filter 14” HEPA Filter
3.3 Gallon Backpack 15 Gallon Floor Vacuum

Part - VAC3311 Part - VAC15011

12” Pre-Filter 2 Ply 14” Pre-Filter 2 Ply
3.3 Gallon Backpack 15 Gallon Floor Vacuum
2 Pack 2 Pack

Part - VAC3312 Part - VAC15012

3 Gallon Collection Bags 15 Gallon Collection Bags
3.3 Gallon Backpack 15 Gallon Floor Vacuum
5 Pack 5 Pack

Other Vac Accessories

Part - VAC71950 Part - VAC3131
* Order by ft. in length of Vacuum Hose Swivel Connector
10’, 25’, 50’ only. 25’ length, 1.5”
1.5” Vacuum Hose
Vacuum Hose
50’ length, 1.5”
Part - VAC82850 Part - VAC75UNI
Vacuum Hose End Cuff Union Cuff
1.5” Vacuum 1.5” to 1.5” to connect
2 lengths of hose

Part - VAC553575 Part - VAC553570

Vacuum Wand Kit Wet-Dry Conversion Kit
10’ Vac Hose, 54” Wand, 3” Alum Brush, Floating Inner-Ring
11” Crevice Tool, 14” Floor Brush, for 15 gallon drum adapter vacs
14” Squeegee, 14” Carpet Tool
Part - VAC75098 Part - VAC3346
14” Cloth Filter Kit Moisture Filter Dryer
Floor Vac, Drum Adaptor, Complete unit for
Basket & Filter air vacuums

Part - VAC75099 Part - VAC3347

14” Cloth Filter Replacement Moisture Filter Dryer
Floor Vac, Drum Adaptor Replacement cartridge

31
Novastrip / Infrared
Tile Heater-Strippers
Novastrip Infrared Tile Strippers are the contractors choice for VAT and vinyl sheet goods removal.
Their infrared radiant heat penetrates tile, loosening the underlying adhesives bond. This allows for
the removal of intact tiles and mastics. VAT tiles can be removed in a non-friable state making your
project much safer, cleaner and less labor intensive.

Model N378

Model N100 Model N1026

Choosing the Right Equipment

1st Step: Application 2nd Step: Substrate / Location
• VAT removal • Concrete Slab • Hallways
• Vinyl sheet goods removal • Warehousing • Small Rooms
• Mastic removal • Large Rooms • Closets and Stairs
• Large square footage
• Mid square footage 3rd Step: Product Selection
• Small and difficult to • N1026 - 6 sq. ft. footprint / 220 V
access areas
• N378 - 2 sq. ft. footprint / 110 V
• N100 - 1 sq. ft. footprint / 110 V

32
 Novastrip / Infrared
Tile Heater-Strippers

Part - N1026
Applications Highest Production
• High production removal of vinyl asbestos tile
• Sheet goods removal
Features & Benefits
• 1026 square inch footprint removes 6 - 12”x12”
tiles in one cycle
• Ceramic coated heat panel provides long life
and durability
• Computerized control systems guarantee precise
and dependable operation
• 100% solid state electronics. No mechanical relays
or solenoids
• Rapid heat up and cool down
• Powder coated aluminum is durable and light-weight
• Triple redundant safety features for operator safety
• Integrated temperature indicator allows for monitoring
of panel base
• Operates on standard 220/240V, 50 Amp service
eliminating external “buck boosters”
• 12v DC controls allow for safe, cool operation & long life
• Case grounded for added safety

Model Part No. Weight Height Tile Removal Power Req Pad Size

Novastrip 1026 N1026 88 lbs 46” 9” x 9”= 12 220/240 volt, 28” x 40”
40 kg 115 cm 225 x 225 mm 50 Amp, 1 phase 70 cm x 100 cm
12” x 12”= 6
300 x 300 mm

33
Novastrip / Infrared
Tile Heater-Strippers

Part - N378
Mid-sized Footprint Applications
• High production removal of vinyl asbestos tile
• Sheet goods removal

Features
• Mid Range 378 square inch footprint removes
2-12”x12” in one cycle
• Operates on a 110V current
• Identical controls to the N1026
• Compact design allows easy access to tight spaces
• Heavy duty and light-weight aluminum construction

Model Part No. Weight Height Tile Removal Size Power Req Pad Size
Novastrip N378 N378 45 lbs 46” 9”x 9” =3 110 V 12” x 12” =2
20 kg 115 cm 225 mm x 225 mm = 3 15 Amp 300 mm x 300 mm
12” x 12” = 2
300 mm x 300 mm = 2

Part - N100
Compact and Portable Applications
• Removal of vinyl asbestos tile in small or confined spaces
• Sheet goods removal

Features
• 196 square inch footprint removes 1-12”x12” in one cycle
• Operates on 110V current with low Amp draw
• Safety sensor shuts down machine if left unattended
• Compact design allows easy access to tight spaces
including steps and closets
• The perfect compliment to the 1026 and 378 models
• Heavy duty and light-weight aluminum construction

Model Part No. Weight Height Tile Removal Size Power Req Pad Size
Ecostrip N100 N100 18 lbs 35” to 44” 9”x 9”=1 110 V 14” x 14”
8 kg 87.5 to 110 cm 225 mm x 225 mm = 1 15 Amp 350 mm x 350 mm
12” x 12” =1
300 mm x 300 mm = 1

34
 Industrial Surface
Preparation
Novatek offers an extensive range of industrial, surface preparation equipment designed for the most demanding
applications. This equipment is built for industry specialists who demand the highest level of performance and durability
from their equipment. Products range from needle scalers, scaling hammers, chisel scalers, up to large floor equipment.
Need to remove coatings, prepare concrete or descale steel? Novatek has the equipment to get the job done.

Air Hammers

Floor Scarifiers Needle Scalers Floor Scalers

Choosing the Right Equipment

1st Step: 2nd Step: Substrate

Application / Removal • Flat Steel Surface • Structural Steel
• Corners and Angles • Marine Decks
• Coatings, Structural Steel
• Vertical Concrete • Weld Seams
• Coatings, Concrete
• Horizontal Concrete • Steel Decking
• Epoxy
• Non-Skid
• Lines
• Rust Cleaning 3rd Step: Product Selection
• Profiling • Needle Scalers • Multi-Head Deck Scaler
• Floor, Wall Scraping • Vibration Reduced Scalers • Multi-Head Floor Scaler
• Pack Rust • Long Reach Scrapers • Floor Planers, Scarifiers
• Air Hammers

35
Needle Scalers

Part - 12NS100
Inline & Compact Needle Scalers provide a thorough and
effective method of removing coatings,
corrosion and other accumulated materials.
Needle scalers will work on almost any
surface, especially irregular surfaces
that are otherwise hard to prepare.

Features & Benefits

• Novatek’s smallest, most compact scaler
• Equipped with 12 x 3mm chisel tip needles
• Lightweight and powerful
• 3800 blows per minute gives maximum performance
• Sliding front tube adjusts for needle wear
• All steel components offer durability and long-life
• Low air consumption allows for use on small,
portable compressors
• Converts to a chisel scaler in seconds
• 2mm needles available
Part - 12CS100
Light Duty
Features & Benefits
• Our smallest, most compact Inline chisel scaler
• Heavy duty 1/2” square shank chisel holder
• Equipped with 3/4” chisel
• 3800 blows per minute
• Low air consumption allows for use on small,
portable compressors
• Converts to a needle scaler in seconds
(Sold with 3/4” chisel) • Standard size chisel shanks

Model Part No. Needle Qty. Weight Length BPM Air

Consumption

12 Inline Needle Scaler 12NS100 12 x 3 mm 3.6 lbs (1 7kg) 13.5” (343 mm) 3800 3 cfm (84 lpm)

12 Inline Chisel Scaler 12CS100 N/A 3.5 lbs (16 kg) 12.3” (313 mm) 3800 3 cfm (84 lpm)

36
 Needle Scalers

Part - 19NS100
Inline & Compact
Features & Benefits
• Powerful inline scaler
• Equipped with 19 x 3mm chisel tip needles
• 3000 blows per minute
• Sliding front tube adjusts for needle wear
• Oval front tube to concentrate needles
• All steel components offer durability and long-life
• Low air consumption allows for use on small,
portable compressors
• Converts to a chisel scaler in seconds
• 2mm needles available
Part - 19CS100
Medium Duty
Features & Benefits
• Compact, powerful, Inline chipping scaler
• 1/2” square shank chisel holder
• 3000 blows per minute
• Low air consumption allows for use on small,
portable compressors
• Converts to a needle scaler in seconds

(Sold with 3/4” chisel)

Model Part No. Needle Qty. Weight Length BPM Air

Consumption

19 Inline Needle Scaler 19NS100 19 x 3 mm 5.8 lbs (2.6kg) 14.8” (375 mm) 3000 5.5 cfm (156 lpm)

19 Inline Chisel Scaler 19CS100 N/A 4.4 lbs (2 kg) 13.5” (337 mm) 3000 5.5 cfm (156 lpm)

37
Needle Scalers

Part - 19NS120
Pistol Grip Needle Scalers provide
Lightweight & Compact operator comfort and ergonomics.

Features & Benefits

• Compact Pistol Grip needle scaler
• Equipped with 19 x 3mm chisel tip needles
• 3000 blows per minute
• Lightweight and ideal for long run times
• Sliding front tube adjusts for needle wear
• Oval front tube concentrates needles
• All steel components offer durability and long-life
• Low air consumption allows for use on small,
portable compressors
• Converts to a chisel scaler in seconds

Part - 19CS120
Medium Duty
Features & Benefits
• Compact, powerful, pistol grip chipping scaler
• 1/2” square shank chisel holder
• 3000 blows per minute
• Low air consumption allows for use on small,
portable compressors
• Converts to a needle scaler in seconds

(Sold with 3/4” chisel)

Model Part No. Needle Qty. Weight Length BPM Air

Consumption

19PG Needle Scaler 19NS120 19 x 3 mm 5.7 lbs (2.6 kg) 12.4” (315 mm) 3000 5.5 cfm (156 lpm)

19PG Chisel Scaler 19CS120 N/A 4.6 lbs (2.1 kg) 10.2” (260 mm 3000 5.5 cfm (156 lpm)

38
 Needle Scalers

Part - 28NS120
Pistol Grip
Features & Benefits
• Most powerful pistol grip scaler in the range
• Equipped with 28 x 3mm chisel tip needles
• 2200 blows per minute gives maximum performance
• Sliding front tube adjusts for needle wear
• Oval front tube to concentrate needles
• All steel components offer durability and long-life
• Low air consumption allows for use on small
portable compressors
• Converts to a chisel scaler in seconds

Part - 28CS120-28CS130
Features & Benefits
Heavy Duty
• Most powerful heavy duty chisel scaler
• 1/2” square or 5/8” hex shank chisel holder available
• 2200 blows per minute for maximum impact
• All steel components offer durability and long-life
• Utilizes a wide-range of chisels and scrapers
• Low air consumption allows for use on small,
portable compressors
28PG Chisel Scaler 5/8” HEX
• Converts to a needle scaler in seconds

(Sold with 3/4” chisel)

Model Part No. Needle Qty. Weight Length BPM Air

Consumption
28PG Needle Scaler 28NS120 28 x 3 mm 8.3 lbs (3.8 kg) 12.4” (315 mm) 2200 7.5 cfm (220 lpm)

28PG Chisel Scaler 28CS120 N/A 5.8 lbs (2.6 kg) 10.2” (260 mm) 2200 7.5 cfm (220 lpm)
1/2” square

28PG Chisel Scaler 28CS130 N/A 6.1 lbs (2.8 kg) 11.5” (280 mm) 2200 7.5 cfm (220 lpm)
5/8” HEX

39
Needle Scalers

Part - 35NS100
Modified Offset
Features & Benefits
• Powerful offset needle scaler Pistol Grip
• Equipped with 35 x 4mm chisel tip needles
• 1800 blows per minute for maximum performance
• Sliding front tube adjusts for needle wear
• Oval and round front tube available
• All steel components offer durability and long-life
• 3mm needles available
• Converts to chisel scaler in seconds

Part - 35CS100
Super Duty
Features & Benefits
• Our most powerful chisel gun
• 1800 blows per minute
• 1/2” square shank chisel holder
• Converts to a needle scaler in seconds

(Sold with 3/4” chisel)

Model Part No. Needle Qty. Weight Length BPM Air

Consumption

35 Offset Pistol 35NS100 35 x 4 mm 12.3 lbs (5.5 kg) 16.7” (425 mm) 1800 8.5 cfm (240 lpm)
Needle Scaler

35 Offset Pistol 35CS100 N/A 8.8 lbs (4 kg) 15.7” (400 mm) 1800 8.5 cfm (240 lpm)
Chisel Scaler

40
 Needles Scaler Kits

Part - 12NS101, 19NS101, 19NS121, 28NS121, 28NS131, 35NS101

Needle/Chisel/Scaler Kits
Kits are the most comprehensive way
to purchase Novatek’s Needle/Chisel Scaler.
Kits contain all parts necessary to convert
your needle scaler into a chisel scaler or vice
versa. It is like having two tools in one.

Kit Contains:
• Your choice of needle scaler
• Spare 3mm needle holder (or 4mm)
28PG Scaler Kit • Spare anvil
• Spare return spring
*(Super Scraper Kit contains 5/8” hex chisels • Spare 2mm needle holder (or 3mm)
in size 1”, 2” and 4”) • Chisel holder 1/2”sq (or 5/8”HEX)
• 3/4” chisel 1/2”sq
• 1 3/8” cranked 1/2”sq
• 2 1/2” straight chisel 1/2”sq
• 100 pack 3mm chisel tip needles (or 4mm flat)
• 250 pack 2mm flat tip needles (or 3mm chisel)

Model Part No. Needle Qty. Weight Length BPM Air

Consumption

12 Inline Scaler Kit 12NS101 12 x 3 mm 3.6 lbs (1.7 kg) 13.5” (343 mm) 3800 3 cfm (84 lpm)

19 Inline Scaler Kit 19NS101 19 x 3 mm 5.8 lbs (2.6 kg) 14.8” (375 mm) 3000 5.5 cfm (156 lpm)

19 PG Scaler Kit 19NS121 19 x 3 mm 5.7 lbs (2.6 kg) 12.4” (315 mm) 3000 5.5 cfm (156 lpm)

28 PG Scaler Kit 28NS121 28 x 3 mm 8.3 lbs (3.8 kg) 12.4” (315 mm) 2200 7.5 cfm (220 lpm)

28 PG Super Scraper 28NS131 28 x 3 mm 8.8 lbs (4 kg) 12.4” (315 mm) 2200 7.5 cfm (220 lpm)
Scaler Kit

35 Offset Pistol Grip 35NS101 35 x 4 mm 12.3 lbs (5.5 kg) 16.7” (425 mm) 1800 8.5 cfm (240 lpm)
Scaler Kit

41
Needle Packs
Needle Bulk

Novatek’s Needles are manufactured with the highest quality

carbon steel and are always heat treated. This manufacturing
process assures all customers a long lasting needle and more
productivity. Novatek also produces spark resistant needles
for use when potential spark or fire hazard exist.
Recommended for oil platforms or chemical plants. Stainless
steel needles are ideal when corrosion is an issue or in food
processing related applications.

Flat Tip
• 2mm Carbon Steel • 4mm Carbon Steel
100 per Pack NPK2010 100 per Pack NPK4010
250 per Pack NPK2015 250 per Pack NPK4015
500 per Pack NPK2020 500 per Case NB47FCS
2000 per Case NBK27FCS

• 3mm Carbon Steel

100 per Pack NPK3010
250 per Pack NPK3015
500 per Pack NPK3020
1000 per Case NBK37FCS

Chisel Tip
• 3mm Carbon Steel
100 per Pack NPK3120
250 per Pack NPK3125
500 per Pack NPK3130
1000 per Case NB37CCS
• 4mm Carbon Steel
100 per Pack NPK4120
250 per Pack NPK4025
500 per Case NB47CCS

Spark Resistant Tip

• 3mm Beryllium Copper
(spark resistant applications)
50 per Pack NPK3080
100 per Pack NPK3085
250 per Pack NPK3090
500 per Case NBK37FBC

*Cases are sold per weight of 22 lbs. (10kg). Needle count is approximate
*Stainless steel needles and pointed tips available upon request

42
 Vibration Reduced
Needle Scalers

Part - VRS019NS
Inline VRS — Vibration Reduced Scalers have
all the impact and functionality of our Inline & Compact
standard range with dramatically reduced
vibration levels. This significantly decreases
the possibility of vibration related injuries
All the power with less vibration.

Features & Benefits

• Our most compact vibration reduced scaler
• Equipped with 19 x 3mm chisel tip needles
• Low vibration provides operator safety and comfort
• Inline configuration allows for access of tight areas
• Tool-less needle change out for easy field replacement
• 2400 blows per minute gives maximum performance
• Low air consumption allows for use on small, portable compressors
• Dust collection shrouds available

Part - VRS019CS
Medium Duty
Features & Benefits
• Powerful Inline vibration reduced chisel scaler
• Low vibration provides operator safety and comfort
• Equipped with 3/4” chisel
• 2400 blows per minute
• Low air consumption allows for use on small,
portable compressors
• Heavy duty 1/2” square chisel holder

(Sold with 3/4” chisel)

Model Part No. Needle Qty. Weight Length BPM Air Vibration
Consumption Levels

19 Inline VRS VRS019NS 19 x 3 mm 5 lbs (2.3 kg) 19.0” (482 mm) 2400 4 cfm (113 lbm) 2.7 m/s2
Needle Scaler

19 Inline VRS VRS019CS N/A 6 lbs (3 kg) 17.3” (440 mm) 2400 4 cfm (113 lpm) 3.7 m/s2
Chisel Scaler

43
Vibration Reduced
Needle Scalers

Part - VRS019NPG
Pistol Grip VRS — Vibration Reduced Scalers
Pistol Grip have all the impact and functionality of our
standard range with dramatically reduced
vibration levels. This significantly decreases
the possibility of vibration related injuries
All the power with less vibration.

Features & Benefits

• Our most compact, pistol grip, Vibration Reduced Scaler
• Equipped with 19 x 3mm chisel tip needles
• Low vibration provides operator safety and comfort
• Pistol grip is ergonomic and comfortable
• Tool-less needle change out for easy field replacement
• 2400 blows per minute gives maximum performance
• Low air consumption allows for use on small,
portable compressors
• Dust collection shrouds available
Part - VRS019CPG
Medium Duty

Features & Benefits

• Compact pistol grip chisel scaler
• Equipped with 3/4” chisel
• Low vibration provides operator safety and comfort
• Heavy duty 1/2” square chisel holder
• Converts to a needle scaler in seconds
• 2400 blows per minute
• Low air consumption allows for use on small,
portable compressors

(Sold with 3/4” chisel)

Model Part No. Needle Qty. Weight Length BPM Air Vibration
Consumption Levels

19PG VRS VRS019NPG 19 x 3 mm 6 lbs (2.7 kg) 16.7” (425 mm) 3000 5.5 cfm (156 lbm) 2.75 m/s2
Needle Scaler

19PG VRS VRS019CPG N/A 7 lbs (3.1 kg) 15.7” (400 mm) 3000 5.5 cfm (156 lpm) 3.3 m/s2
Chisel Scaler

44
 Vibration Reduced
Needle Scalers

Part - VRS028NPG
Pistol Grip
Features & Benefits
• Our most powerful Vibration Reduced Scaler
• Equipped with 28 x 3mm chisel tip needles
• Low vibration provides operator safety and comfort
• 3000 blows per minute gives maximum performance
• Tool-less needle change out for easy field replacement
• All steel components offer durability and long-life
• Low air consumption allows for use on small
, portable compressors
• Comfortable pistol grip configuration
• Converts to a chisel scaler in seconds
• Dust collection shrouds available
Part - VRS028CPG
Features & Benefits Heavy Duty
• Our most powerful pistol grip, vibration reduced chisel scaler
• Equipped with a 3/4” chisel
• Low vibration provides operator safety and comfort
• 3000 blows per minute
• All steel components offer durability and long-life
• Low air consumption allows for use on small,
portable compressors
• Converts to a needle scaler in seconds
• Heavy duty 1/2” square chisel holder

(Sold with 3/4” chisel)

Model Part No. Needle Qty. Weight Length BPM Air

Consumption

28PG VRS VRS028NPG 28 x 3 mm 7 lbs (3.5 kg) 16.5” (410 mm) 2200 6 cfm (170 lpm)
Needle Scaler

28PG VRS VRS028CPG N/A 7 lbs (3 kg) 16.5” (410 mm) 2200 6 cfm (170 lpm)
Chisel Scaler

45
Long Reach
Tile Stripper / Scraper

Part - 28XC2ST-28XC5ST Versatile air powered Scrapers/Scalers are

Efficient & Easy two tools in one. Remove vinyl, ceramic tile,
sheet goods, and material build with our
chisel attachment. Remove coatings, rust,
and scale with our needle attachment.

Features & Benefits

• Heavy-duty steel ball retainer
• Chisels ranging from 1”, 2”, and 4” for ceramic tile
and thinsets
• 4”, 8”and 12”extra sharp scraper blades for sheet
goods and mastics
• 4” chisel standard
• Padded comfort handle grip
• Efficient, using only 5 CFM of compressed air
runs off a portable compressor
• 2200 Blows per minute hitting power
• Easily converts to a long reach needle scaler

Part - 28XN2ST-28XN5ST
First Stand Up Scaler
Features & Benefits
• Equipped with 28 x 3mm chisel tip needles
• Sliding front tube adjusts for needle wear
• All steel components offer durability and long life
• Padded comfort handle grip
• Efficient, using only 5 CFM of compressed air
runs off a portable compressor
• 2200 Blows per minute hitting power
• Easily converts to a long reach chisel scaler

Model Part No. Weight Length BPM Air Consumption

2’ Long Reach Scraper 28XC2ST 10.2 lbs (4.6 kg) 30” (75 cm) 2200 5 CFM (126 lpm)

5’ Long Reach Scraper 28XC5ST 13 lbs (6 kg) 60” (150 cm) 2200 5 CFM (126 lpm)

2’ Long Reach Needle Scaler 28XN2ST 11 lbs (5 kg) 34” (85 mm) 2200 5 CFM (126 mm)

5’ Long Reach Needle Scaler 28XN5ST 14 lbs (6.3 kg) 65” (163 mm) 2200 5 CFM (126 mm)

46
 Long Reach
Tile Stripper / Scraper

Ultra light-weight aluminum cover makes

Part - 28XC4AL-28XC5AL
these the perfect Scraper/Scaler for walls Ultra Lightweight
and ceilings.

Features & Benefits

• Lightweight Aluminum casing
• Heavy-duty steel ball retainer
• Chisels ranging from 1”, 2”, and 4” for ceramic tiles
and thinsets
• 4”, 8” and 12” extra sharp scraper blades for sheet
goods and mastics
• 4” chisel standard
• Padded comfort handle grip
• Efficient, using only 5 CFM of compressed air,
runs off a portable compressor
• 2200 Blows per minute
• Easily converts to a long reach needle scaler

Part - 28XN4AL-28XN5AL

Features & Benefits

Powerful for Overhead
• Ultra lightweight Aluminum casing
• Equipped with 28 x 3mm chisel tip needles
• Sliding front tube adjusts for needle wear
• All steel components offer durability and long life
• Padded comfort handle grip
• Efficient, using only 5 CFM of compressed air
• 2200 Blows per minute compressed air, runs
off a portable compressor
• Easily converts to a long reach chisel scaler

Model Part No. Weight Length BPM Air Consumption

4’ Long Reach Scraper Aluminum 28XC4AL 6.6 lbs (3 kg) 54” (135 cm) 2200 5 CFM (126 lpm)

5’ Long Reach Scraper Aluminum 28XC5AL 7.7 lbs (3.5 ks) 60” (150 cm) 2200 5 CFM (126 lpm)

4’ Long Reach Needle Scaler Aluminum 28XN4AL 7.7 lbs (3.5 kg) 11” (135 cm) 2200 5 CFM (126 lpm)

5’ Long Reach Needle Scaler Aluminum 28XN5AL 8.8 lbs (4 kg) 60” (150 cm) 2200 5 CFM (126 mm)

47
Long Reach
Tile Stripper / Scraper

Part - 40LRE600 Unique “S” shape Ergonomic is designed

to reduce back strain. Ergonomic and
Ergonomic Design powerful, removes vinyl and ceramic tile,
sheet goods, material buildup, coatings,
rust and scale.

Features & Benefits

• Curved configuration for added comfort
• Vibration reducing top handle standard
• Heavy-duty steel ball retainer
• Chisels ranging from 1”, 2”, and 4” for ceramic
tiles and thinsets
• 4”, 8” and 12” extra sharp scraper blades for sheet
goods and mastics
• 4” chisel standard
• Efficient, using on 5 CFM of compressed air
runs off a portable compressor
• 2200 Blows per minute hitting power
• Nylon shoulder strap for operator comfort
Part - 45BRK600
Our most aggressive Hammer/Scraper —
Power and Ergonomics perfect for removing quarry tiles, thin-set
and mortars. Great for non-skids, or any-
where aggressive chipping/hammering
and scraping are needed.

Features & Benefits

• Super duty 7/8“ hex chisels available in
1”, 2”, and 4”
• Large bore cylinder and long stroke for
optimal power
• 1100 Blows per minute
• Rugged single ball retainer for quick and
safe chisel changes
• Vibration reduced handle for ease of use and
operator comfort
• Nylon shoulder strap for operator comfort
is standard

Model Part No. Weight Length BPM Air Consumption

Long Reach “Ergo” 40LRE600 15 lbs (7 kg) 72” (180 cm) 2200 5 CFM (126 lpm)

Long Reach Breaker 45BRK600 27 lbs (12 kg) 60” (150 cm) 2000 20 CFM (564 lpm)

48
 Chisels for Scalers

1/2” (12mm) Square Shank Standard Chisels (for scaler models - 12, 19, 28 or 35 CS)

Part No. Shank Type Blade Width Chisel Length Special Applications

ACCS101 Square 3/4” (19 mm) 7” (178 mm) Weld spatter removal

ACCS103 Square 2 1/2” (19 mm) 7” (178 mm) Wide flat chisel for the removal
of peeling paint and rust

ACCS107 Square 3” (75 mm) 7” (178 mm) Wide flat chisel for the removal
of peeling paint and rust

ACCS108 Square 1 3/8” (35 mm) 7” (178 mm) Scraping thick coatings

ACCS110 Square 2” (50 mm) 7” (178 mm) Made with aluminum bronze
spark resistant aluminum bronze
for use in hazardous areas

ACCS106 Square 1/2” Diamond 7” (178 mm) Mortar rake for

Point re-pointing brickwork

1/2” (12mm) Square Shank Vibration Reduced Chisels (for scaler VRS19CS or VRS28CS)

Part No. Shank Type Blade Width Chisel Length Special Applications

ACCSVR10 Square 3/4” (19 mm) 7” (178 mm) Weld spatter removal

ACCSVR12 Square 2 1/2” (62 mm) 7” (178 mm) Wide flat chisel for the removal
of peeling paint and rust

ACCSVR15 Square 2 1/2” (62 mm) 7” (178 mm) Scraping thick coatings

ACCSVR20 Square 2” (62 mm) 7” (178 mm) Made with aluminum bronze
spark resistant aluminum bronze
for use in hazardous areas

49
Long Reach Scaler
Accessories

5/8” (16mm) Hex Shank Chisels (when fitted with 5/8” chisel holder.)
Chisels to suit the range of Long Reach Scalers and 28CS130

Part No. Shank Type Blade Width Chisel Length Special Applications

ACCHXO1 Hex Straight 1” (25 mm) 8” (203 mm) Flat chisel for sand
cast chipping

ACCHXO2 Hex Straight 2” (50 mm) 8” (203 mm) Removal of tile/

linoleum from floors

ACCHXO4 Hex Straight 4” (100 mm) 8” (203 mm) Removal of tile/

linoleum from floors

ACCHX12 Hex Straight 2” (50 mm) 8” (203 mm) Made with aluminum bronze
spark resistant aluminum bronze
for use in hazardous areas

ACCHX14 Hex Straight 4” (100 mm) 8” (203 mm) Made with aluminum bronze
spark resistant aluminum bronze
for use in hazardous areas

ACCHX20 Hex Straight 4” (100 mm) 8” (203 mm) Blade holder for scraper, also
known as the YOKE with hardware

ACCLRNA 8TPT 3 mm x 7” Chisel Tip Needle attachment kit to change

your scraper long reach into a
Long Reach Needle Scaler

28NS531H Hex 5/8” Chisel holder to convert

Long Reach Needle Scaler
into a Long Reach Scraper

Blade Holder (Yoke) Scraper Complete Replacement Scraper Bevel Edge

Blades

50
 Long Reach Scaler
Accessories

Chisels to suit the range of Long Reach Scalers and 28CS130

(when fitted with 5/8” chisel holder.) 5/8” (16mm) Hexagon Shank

Part No. Shank Type Blade Width Chisel Length Special Applications

ACCHX34 Hex Straight 4” (102 mm) 10” (254 mm) Stubborn adhesive removal
Sharp

ACCHX38 Hex Straight 8” (203 mm) 10” (254 mm) Paint and coating spillage removal
Sharp

ACCHX32 Hex Straight 12” (305 mm) 10” (254 mm) Carpet and tile removal
Sharp

ACCHX24 N/A 4” (102 mm) N/A Replacement blade sharp 4” (5/pk)

Sharp

ACCHX28 N/A 8” (203 mm) N/A Replacement blade sharp 8” (5/pk)

Sharp

ACCHX22 N/A 12” (305 mm) N/A Replacement blade sharp 12” (4/pk)
Sharp

Chisels for the Long Reach Breaker 7/8” (22mm) Hexagon Shank

Part No. Shank Type Blade Width Chisel Length Special Applications

ACCBK01 Hex Straight 1” (25 mm) 14” (360 mm) Removal of terrazzo, stubborn
ceramic, marble tiles, and thin-set

ACCBK02 Hex Straight 2” (50 mm) 14” (360 mm) Removal of terrazzo, stubborn
Bevelled ceramic, marble tiles, and thin-set

ACCBK04 Hex Straight 4” (100 mm) 14” (360 mm) Removal of terrazzo, stubborn
ceramic, marble tiles, and thin-set

51
Scaling / Air Hammers

Part - PHS1HDS-PHS1HDL
Hand-Held Scaling Air Hammers are
Single Head designed for the rapid take-down of
concrete, fracturing and removing high-
build coatings, and texturing concrete.
Perfect for epoxy and non-skid coatings.

Features & Benefits

• Hard hitting / fractures coatings
• 2500 blows per minute per piston
• Quick change heads
Part - PHS3HDS-PHS3HDL • Tungsten Carbide Bush Hammer or Cruciform heads
• Nylon brush seals clean pistons on every stroke
Triple Head • Screw top cap for simple head and piston replacement
• Single piece piston and tip assures durability
• Brush seal technology to extend piston life
• Two live air inlets allow for either inline or
perpendicular handle configurations
(3 head hammer only)
• Replacement piston with integrated
Tungsten Carbide Heads

Part - PHS433B Part - PHS433C

Bush Hammer Piston Cruciform Piston
Applications Applications
• Texturizing concrete • Rapid take-down of concrete
• Aggregate exposure for bonding • Coatings removal from steel or
overlayments concrete

• Removes loose material for • Non-skid and epoxy removal

concrete crack and joint repair • Pack rust and laminar rust
removal

Model Part No. Weight Length BPM Air Cylinder Piston

Consumption Bore Stroke

Heavy Duty PHS1HDS 8 lbs 9” 2500 6.5 cfm 1.06” 1.04”

Single Scaler-Short Handle 41 kg 229 mm 186 lpm
Heavy Duty PHS1HDL 9 lbs 18” 2500 6.5 cfm 1.06” 1.04”
Single Scaler-Long Handle 46 kg 457 mm 186 lpm
Heavy Duty PHS3HDS 13 lbs 9” 3 x 2500 14 cfm 1.06” 1.04”
Triple Scaler-Short Handle 59 kg 229 mm 408 lpm
Heavy Duty PHS3HDL 14 lbs 18” 3 x 2500 14 cfm 1.06” 1.04”
Triple Scaler-Long Handle 64 kg 457 mm 408 lpm

52
Novatek.Catalog14_ks_Novatek14.cat 9/5/2014 3:48 PM Page 53

11 Piston Deck Scaler

and Floor Scabbler

Part - PDS11
Applications Heavy Duty 11 Head Deck Scaler
• For the removal of coatings, scale, and pack rust from
steel decking. Compact and powerful, this is the perfect
machine for use in difficult to access areas
Features & Benefits
• Powerful 27,500 combined blows per minute
• Compact body, less than 12”, allows for work *see page 24 for Deck Scaler
between and under structures heads and consumables
• Air efficient, requires only 50 CFM @ 90 PSI
• Heavy Duty Tungsten Carbide heads provide long life
• Lightweight at 82 lbs
• Vacuum shrouding for dust control available

Part - PFS11
Applications Super Duty 11 Head Deck Scabbler
• Our most aggressive scabbler. Heavy duty
scabbling for quick take down of coatings
and concrete. Perfect for haz mat removal
when equipped with our dust collection shroud.

Features & Benefits

• Tungsten carbide heads for aggressive removal *see page 25 for Floor Scabbler
and long life heads and consumables
• Fractures coatings without damaging to the substrate
• 24,200 combined blows per minute
• Cruciform or bush hammer heads available
• 150 lb block
• Vibration dampening technology
• Collapsible handle
• Available dust shrouds for work in hazardous
environments, including radiological decontamination

Model Part No. Weight Width BPM Air Cutting Path Working
Consumption Pressure
NDS11 Deck Scaler PDS11 80 lbs (36 kg) 11.4” (290 mm) 27,500 50 cfm 10” (252 mm) 90 PSI
(11 x 2500) 1560 lpm
NDS11 Deck Scaler PDS11VSE 82 lbs (37 kg) 11.4” (290 mm) 27,500 50 cfm 10” (252 mm) 90 PSI
w/ Dust Collection (11 x 2500) 1560 lpm
NFS11 Floor PFS11 154 lbs (70 kg) 13.4” (340) 24,000 70 cfm 11.2” (285 mm) 90 PSI
Scabbler (11 x 2200) 1982 lpm
NFS11 Floor Scabbler PFS11VSE 160 lbs (73 kg) 13.4” (340) 24,000 70 cfm 11.2” (285 mm) 90 PSI
w/ Dust Collection (11 x 2200) 1982 lpm

53
Scarifiers / Floor Planers

Part - NFP-8
The NFP-8 delivers a combination of
Floor Planer innovative technology and performance
tested features, all in a rugged rotary
planer. The modern integral design of the
Honda NFP is easy to maneuver during profiling
Gasoline Engine and yields higher work rate. Suitable for
rapidly removing scale, rust, paint and
other deposits from steel surfaces
in preparation for re-coating.

Applications
• Concrete and steel coatings removal
• Concrete removal and leveling
• Traffic line removal
Air Motor • Concrete removal for non-skid surfaces
• Rust and scale removal

Features & Benefits

• 8” (200 mm) cutting path
• Equipped with heavy duty tungsten carbide cutters
• Accurate locking depth control
• Compact design works easily in tight spaces
Electric Motor • Fully adjustable handle
• Integrated vacuum adapter for dustless applications
• Available in 6 different power configurations including
Air, Electric and Gasoline
• Delivered turnkey, loaded with drum and tungsten
carbide cutters

NFP-8 Models Power 1 ph 60 Hz 1 ph 50/60 Hz 3 ph 50 Hz 3 ph 60 Hz Noise Levels

Requirements LpAdB(A)

Gasoline Honda 5.5 hp SCA2000 92

110 v Electric 3 hp SCA2001 90

220-240 v Electric 3 hp SCA2002 90

380-415 v Electric 3.5 hp SCA2005 90

380-480 v Electric 3.5 hp SCA2003 94

Air 5 hp 80 CFM SCA2004 92

54
 Scarifier Cutters

Part - SCA5500

Tungsten Carbide Cutter

Heavy-duty heat treated cutters for coatings
removal, descaling, removal of materials build-up,
concrete texturing and grooving.
Five points tungsten carbide cutter for longer life

Part - SCA5160

Beam Cutter
Heat treated steel cutter for the removal of paint,
coatings and laitance from new floors. Also used for
removing build-up of grease, dirt and ice,
use when fine textured surface is desired

Part - SCA5120
Star Cutter
Heat-treated steel cutters for the removal
of paint coatings and laitance from new floors
More aggressive than the beam cutter.
Also used for removing build up of grease, dirt and ice use
when a rougher surfacing is required
Part - SCA5600
Milling Cutter
Removal of thermoplastic coatings, bituminous coatings,
rubberized coatings and runway markings.
Very efficient and cost effective alternative to
burning off thermoplastics

Part - SCA6621
Crimped Wire Brush
Crimped wire, for general workshop cleaning
and removal of light surface rust. Use
for light rust deposit cleaning or polishing steel

Part - SCA6620
Twisted Knot Wire Brush
Twisted knot for aggressive
workshop cleaning and removal of heavy rust,
flaky coating, rubber deposits.
Most agressive brush assembly

55
Scarifier
Accessories and Consumables

Part - SCA5500 Part - SCA5600

Tungsten Carbide Cutter Milling Cutter
Heavy-duty heat treated cutters Removal of thermoplastic coatings, bituminous
for coatings removal, descaling, and coatings, rubberized coatings and runway
removal of materials build-up markings. Very efficient and cost effective
Long lasting 5 points tungsten cutter alternative to burning off thermoplastics

Part - SCA5160 Part - SCA6622

Beam Cutter Wire Brush Twisted Knot
Heat treated steel cutter for the removal Twisted knot for general
of paint, coatings and laitance from new workshop cleaning and removal of light
floors. Also used for removing build-up surface rust
of grease, dirt and ice

Part - SCA5120 Part - SCA6623

Star Cutter Wire Brush Crimped

Heat-treated steel cutters for the removal Crimped wire for general
of paint coatings and laitance from new workshop cleaning and removal of light
floors. More aggressive than the beam surface rust
cutter. Also used for removing build up
of grease, dirt and ice

Heavy-Duty Drum
Model Cutters Washers
NFP-8 w/ TCT Cutters 76 84
NFP-8 w/ Star Cutters 272 0
NFP-8 w/ Milling Cutters 24 76
NFP-8 w/ Beam Cutters 240 0
NFP-8 w/ Wire Brush 24 0

Model Working Weight Length Width Height Cutter Air Power Voltage
Width RPM Consumption
NFP-8 Gas 8” 108 lbs 37.5” 13.8” 39” 1833 N/A 5.5 hp N/A
200 mm 49 kg 940 mm 350 mm 1000 mm
NFP-8 Electric 8” 120 lbs 37.5” 13.8” 39” 1753 N/A 3-3.5 hp 110-440 V
200 mm 54 kg 940 mm 350 mm 1000 mm
NFP-8 Air 8” 99 lbs 37.5” 13.8” 39” 1525 115 cfm 5 hp N/A
200 mm 45 kg 940 mm 350 mm 1000 mm 3256 lpm

56
 Scarifier
Accessories and Consumables

Part - SCA20CD

Heavy Duty Drum

Heavy Duty Drum with 12mm shaft

Part - SCA20GD

Heavy Duty Grooving Drum

Heavy Duty Drum with 12mm shaft

Part - SCA20C2
Drum Shaft
12mm shaft (drums requires 4 shaft)

Part - SCA6621
Brush Assembly
Complete drum - Crimped Wire
Light Duty - Polishing

Part - SCA6620
Brush Assembly
Complete drum - Twisted Knot
Heavy Duty - Rust Removal

How to load Drums

Heavy Duty Drum Heavy Duty Drum with Heavy Duty Drum with
with Milling Cutters Tungsten Cutters Star or Beam Cutters

57
CBS - Vacuum Blasting

CBS or Contained Blast Systems are designed for use when the recovery of debris and
blast media is critical, particularly in hazardous coating removal applications or
cleaning of contaminated concrete. It is also ideal when dust and blast media control
is important for sensitive environmental applications. CBS can be adapted to existing
blast equipment and provide an environmentally safe alternative to open blasting.

Choosing the Right Equipment

1st Step: Application 2nd Step: Substrate 3rd Step:

• Dustless coatings removal • Steel Product Selection
• Dustless rust removal • Contained Blast System kit “A”
• Concrete
• Lead based paint removal • Contained Blast System kit “B”
• Block •
• Etching Contained Blast System kit “C”
• Graffiti removal • Decking • Contained Blast System kit “D”
• Bulk material pickup • Stone • Workhead stage
• Multi power tool collection • HEPA stage
• Blasting with existing • Blast workhead
recovery system • Blast workhead kit

58
 CBS - Vacuum
Blasting Systems

Part - CBS000A – CBS000B –

The design of the CBS—Contained Blast CBS000C – CBS000D
Systems offer maximum efficiency and CBS-Contained Blast Systems Kits /
dependability. Vacuum blasting was not
Multi Tool Vacuum
developed to replace open abrasive blasting,
but to be utilized on applications where Features & Benefits
capture and containment of blast media is • Efficient and powerful vacuum pumps allow to
work up to 300’ away
critical. Our contained blast systems were • Pumps allow for conveyance of the most dense
engineered to be the most productive materials or media
vacuum blast recovery available. It can be • Simple system break down for easy transport
adapted to your existing open blast system. • HEPA filtration available for hazardous
material removal
• Adapt your existing blasting equipment to
vacuum blasting recovery system
• Single or dual pumps setups allow flexibility
• Provides a safe and environmentally friendly
alternative to open blasting
• Contains hazardous materials without the need
of elaborate containments
• Permits other work to be done while blasting
is performed
• Up to a 3” (75mm) blasting pattern
• 360o swiveling nozzle allows workhead to rotate
around the nozzle offering greater mobility and
less fatigue for the operator
• Replaceable steel wear sleeves
• Low maintenance and highly versatile
• Can be used as a vacuum with up to 8 ports
• Achieves brush-off blast up to white metal finishes

Applications
• Our vacuum blasting workhead is designed to work
with either Novatek contained blast kits or existing
vacuum blasting equipment.

Model Part No. CFM Static Lift Air Consumption Recovery Blast # of Vacuum
Output Flow Inches of Water & CFM Capacity Nozzle Size Ports
CBS Kit “A” 1 Pump Collection System CBS000A 360 cfm 165” 200 CFM @ 100 PSI 35/55 Gal Up to #4 Blast Up to 4 Ports
Up to 100’ Vac Hose
CBS Kit “B” 2 Pump Collection System CBS000B 720 cfm 165” 400 CFM @ 100 PSI 35/55 Gal Up to #6 Blast Up to 8 Ports
Up to 200’ Vac Hose
CBS Kit “C” 1 Pump Collection System CBS000C 360 cfm 165” 200 CFM @ 100 PSI 35/55 Gal Up to #4 Blast Up to 4 Ports
with HEPA Filtration Up to 100’ Vac Hose
CBS Kit “D” 2 Pump Collection System CBS000D 720 cfm 165” 400 CFM @ 100 PSI 35/55 Gal Up to #6 Blast Up to 8 Ports
with HEPA Filtration Up to 200’ Vac Hose

59
CBS - Vacuum Blasting
Workhead

Part - CBS0015, Blast Workhead

Universal Fit
Features & Benefits
• All steel body for maximum durability
• Can be fitted to existing blasting equipment
• Works off standard ¾” blast hose
• Utilizes standard blast nozzles
• 360º swivelling nozzle allows the workhead
to rotate around the nozzle, offering greater
mobility and less fatigue to the operator
• Replaceable front steel wear sleeves for
increased workhead life
• Multiple brushes available for coating removal
on flat, inside corner and outside edge surfaces
• 3” blast pattern
• Can be fitted to all existing blasting equipment.

Part - CBS0020, Blast Workhead Kit

Turn Key Blast Workhead
Features & Benefits
• Workhead complete with all its accessories
• Blast Workhead complete as above
• 1 x #4 Blasting nozzle
• 2 x internal corner brushes
• 2 x external corner brushes
• 2 x 2” steel wear sleeves
• 2 x 4” steel wear sleeves

Everything you need to match Our Vacuum Blasting Workhead is designed

your existing blast system to work seamlessly with either Novatek
contained blast systems or existing Vacuum
Blasting equipment. Its compact design
and lightweight make this the preferred
Vacuum Blasting Workhead in the industry.

60
 CBS - Vacuum Blasting
Workhead

Part - CBS0021
Blast Workhead with Roller Kit
Features & Benefits
• More comfortable for operator
• Keeps better surface seal
• Blast Workhead complete on prior page
• 1 x #4 Blasting nozzle
• 2 x internal corner brushes
• 2 x external corner brushes
• 2 x 2” steel wear sleeves
• 2 x 4” steel wear sleeves

Part - CBS0008
Blast Workhead Stage
Features & Benefits
• Workhead kit complete as described on prior page
• 50’ of heavy duty 3” vacuum recovery hose
• 10’ of ¾” Blast whip hose with fittings
• 2 worm gear clamps

The workhead stage works in conjunction

with your existing bulk recovery/blast recovery
vacuum system. Simply add the workhead stage
to your blast pot and vacuum and you are ready
to vacuum blast

61
CBS - Vacuum Blasting Stages

Part - CBS0014
CBS HEPA Stage
Features & Benefits
• HEPA Box assembly
• HEPA Filter
• Vacuum relief valve
• 6’ x 3” Vacuum Hose
• Tough composite coatings for durability
• Integrated carrying handle
• Super duty steel construction
• Large 24 x 24 x 12 HEPA filter
• Quick release Cam Lock connections
• Portable, can be easily loaded for transport

The HEPA stage will modify your non HEPA system

to a HEPA filtered vacuum blast operation.
Adapts to systems whether open blasting or vacuum
blasting. No equipment wasted, use your own blast pot
and recovery system.

Part - CBS0018
Material Transfer Stage
Features & Benefits
• Easily convey and transfer bulk abrasives
• Moves 1 to 5 tons of abrasive per hour
• Used for either dry bulk or slurry recovery
• Can be used for blast pot loading
• Reduces cleanup labor costs

Utilize your CBS vacuum pump for material transfer

and clean up. Simply attach the material transfer stage
to your existing pump and you are ready to recover
abrasives and other loose materials into 55 gallon
drums for easy disposal.

62
 CBS-Contained Blast System
Accessories & Consumables

Part - CBSA028 Part - CBSA032

Inside Corner 2” Wearsleeve
• 3” Brush

Part - CBSA029 Part - CBSA033

Outside Corner 3” Wearsleeve
• 3” Brush

Part - CBSA030 Part - CBSA034

Flat Surface 4” Wearsleeve
• 3” Brush

Part - CBSA004 Part - CBSA006

#4 Blast Nozzle #6 Blast Nozzle

Part - CBSD305 Part - CBSD040

3” Vacuum Hose Blasthose 3/4” with fittings
• 50 ft. Roll • 50 ft. roll

Part - CBS0009 Part - CBS0010

Vacuum Manifold Vacuum Manifold
• 4 Ports 3” with all coupling, • 8 ports 3” with coupling fitting,
fittings and hose clamps hose and clamps

Part - F4010 Part - CBS0016

Hepa Filter Workhead Roller
• 24”x 24” - 12” Attachment
• 99.979% at 0.3 micron

63
Marine Maintenance

Novatek offers a range of equipment used for marine maintenances and

surface preparation. Applications vary from spot cleaning, surface preparation,
coating removal of large steel decking and cargo hold cleaning.

Flexshaft Scaler

Hydra Water Cannon NFP 8, NDS 11 Deck Scalers & Needle Scalers

Choosing the Right Equipment

1st Step: Application 2nd Step: Substrate 3rd Step:

• Coatings removal • Steel Product Selection
• Rust/scale removal • Decking • Flexshaft Scalers

• Non-skid removal • Piping • Hydra Water Cannon

• Epoxy removal • Vertical/steel • Needle Scalers

• Pack rust removal • Horizontal/steel • NFP Scarifier

• Cargo hold cleaning • 11 Piston Deck Scaler

• Piracy deterrence • 1 or 3 Piston Scaler

64
 Hydra Water Cannon

The Hydra Water Cannon is designed Part - MWC001

for the rapid cleaning of cargo holds Heavy-Duty
and ships. Removes build-up, residual
materials, flaking paint and debris. Can
also be used as an anti-piracy device.

Features & Benefits

• Focused stream of water reaches heights
of 100 ft. or more (30 meters or more)
• Corrosion resistant, solid stainless steel body
• Heavy-duty tripod provides a rugged and
stable platform
• No moving parts to wear
Part - MWC262
• Swiveling head allows for ease of operation
• Quick cam disconnect for 2” water hose
• Integrated “ball valve” for regulating jet stream
and air volume and pressure
• Quick cam connections for the rapid
connection of hoses
• Recognized anti-piracy device
Part - MWC250
• Quick cam disconnect for 2.5” water hose

Part - MWC300
• Instantaneous Adaptor

Equivalent to:
ISSA Code # 5508501 (Gun) 5508502 (Tripod/Stand)
IMPA Code # 590741, 590742, 590744, complete kit

Models Part No. Weight Water Water Pressure Air Consump Air Pressure Air Hose Water Hose
Consump (Rec) (Rec)
Hydra Cannon, MWC001 Gun = 13 lbs (6 kg) 110 Gal./Min 90 PSI 71 cfm 100 to 120 PSI 3/4” 2” (50 mm) &
Stand, Gun w/ Stand = 20 lbs (9 kg) 485 Liter/Min 6 kg/cm2 2 m3/min 7 to 8 kg/cm2 19 mm 2 1/2” (65 mm)
2” & 2 1/2” Coupling Total = 33 lbs (15 kg)
Hydra Cannon, Stand, MWC002 Gun = 13 lbs (6 kg) 110 Gal./Min 90 PSI 71 cfm 100 to 120 PSI 3/4” 2” (50 mm)
Gun w/ 2” Coupling Stand = 20 lbs (9 kg) 485 Liter/Min 6 kg/cm2 2 m3/min 7 to 8 kg/cm2 19 mm
Total = 33 lbs (15 kg)
Hydra Cannon, Stand, MWC025 Gun = 13 lbs (6 kg) 110 Gal./Min 90 PSI 71 cfm 100 to 120 PSI 3/4” 2 1/2” (65 mm)
Gun w/ 2 1/2” Coupling Stand = 20 lbs (9 kg) 485 Liter/Min 6 kg/cm2 2 m3/min 7 to 8 kg/cm2 19 mm
Total = 33 lbs (15 kg)

65
Flexshaft Deck Scalers

Part - MFS110, MFS220, MFS300

Versatility & Access
Flexshaft Deck Scalers rapidly
remove scale, rust, paint, and other
unwanted deposits or build-ups while
leaving the surface ready for priming,
painting, or coating applications.
Air flexshaft model

Electric Applications
flexshaft model • Remove paint, rust, scale and other unwanted
deposits in difficult to access areas
• Perfect for prepping under piping, decks,
wheelhouses, and areas that were previously
inaccessible

All scaling heads Features & Benefits

and brushes
included with • Flexible shaft drive with remote power source
all models allows for versatility and access
• Multiple cutting, flailing and brushes available for
a wide variety of removal and finishing
• Drive motors available in electric or compressed
air models
• Compact design works easily in tight spaces
• Lighter weight than comparable machines
• Comfort handle with guard
• Comes complete with 10’ flex shaft heavy-duty
chipping leaf head, 6” cutter scaling head, 6” wire
brush, and guard and wrenches

Model Part No. Weight Air / Power Base IMPA and ISSA
Equivalent Codes
IMPA:
Flexshaft Descaler MFS110 75 lbs 110v 50/60 hz Skid 591217 - 591241
591243 - 591245
110 Volt 50/60 Hz Electric 34 kg 1 hp 125 Amp ISSA: 5507700
IMPA:
Flexshaft Descaler MFS220 75 lbs 220v 50/60 hz Skid 591218 - 591242
220 Volt 50/60 Hz Electric 34 kg 1 hp 61 Amp 591244 - 591246
ISSA: 5507700

Flexshaft Descaler MFS300 70 lbs 66 cfm @ 90 psi Swivel IMPA:

15 hp Air 31 kg 31.2 lps @ 90 psi 591251 - 591281
591282 - 591283
ISSA: 5507700

66
 Flexshaft Scalers
Spares and Consumables

Part - MFS4581

6 Cutter Head
6” heavy-duty heat treated cutters for coatings removal,
descaling, and removal of materials build-up.

Part - MFS4550

Heavy-Duty Leaf Head

Hardened steel chipping leaves/fingers rotate and strike the
surface, fracturing coatings and laminar rust without
gouging the surfaces.

Part - MFS4160

6” Power Brush
Vertical medium-duty wire removes surface rust, scale, and thin
build materials and coatings. Accesses difficult to reach areas.
Gentle on more sensitive surfaces.

Part - MFS4163
6” Twisted Wire Brush
Vertical heavy-duty twisted wire is more aggressive than
the power brush. Perfect for heavier coatings and build
up removal. Leaves a more significant profile.

Part - MFS4166
Crimped Wire Cup Brush
Horizontal medium-duty wire removes surface rust,
scale, and thin build materials and coatings. Gentle on
more sensitive surfaces.

Part - MFS4167
Twisted Knot Cup Brush
Horizontal heavy-duty twisted wire is more aggressive than our
power brush. Perfect for heavier coatings and build
up. Leaves a more significant profile.

67
Other Marine Maintenance
Equipment

Needle Scalers/Chisel Scalers

Additional information on pages 36 thru 41

• Rust and coatings removal

• Straight or pistol grip
• Various sizes and power
• Change to Chisel Scaler easily
• Shroud available to control dust

ISSA code equivalent: 55.043.00 & 55.045.00 & 55.091.00

IMPA code equivalent: 59 04 81 to 59 04 84

Vibration Reduced Needle Scalers

Additional information on pages 43 thru 45

• Rust and coatings removal

• Straight or pistol grip
• Various sizes and power
• Tool-less needle reload
• Reduced vibration for operator comfort
• Shroud available to control dust

ISSA code equivalent: 55.043.00 & 55.045.00 & 55.091.00

IMPA code equivalent: 59 05 00 to 59 05 10

Peening Scarifying Tools

Additional information on pages 14 thru 17

• Rust and coatings removal

• 2” or 4” cleaning path
• Air or electric
• Duplicates blasting finish
with Rotopeen flaps
• Integrated vacuum port
ISSA code equivalent: 55.098.00
IMPA code equivalent: 59 22 51 to 59 22 55

68
 Other Marine Maintenance
Equipment

Piston Deck Scaler

Additional information on page 53

• Fractures rust and coatings quickly

• Collapsible handles allows access to
difficult areas on ship decks
• Loosens coatings prior to blasting
• Shroud available to control dust

ISSA code equivalent: 55.042.00 & 55.095.00

IMPA code equivalent: 59 04 05

Piston Air Hammers

Additional information on page 52

• Works in conjuction with Piston Deck Scaler

• Thick rust and scale removal
• Single or triple piston models
• Cruciform or bush hammer piston
• Shroud available to control dust

ISSA code equivalent: 55.040.00 & 55.093.00

IMPA code equivalent: 59 03 82 to 59 03 84

Long Reach Needle Scaler/Scrapers

Additional information on pages 46 thru 51

• Multiple application tool

• Converts from needle scaler
to scraper chisel in seconds
• Perfect for overhead work or
floor application
• Steel or lightweight models
ISSA code equivalent: 55.046.00 & 55.094.00
IMPA code equivalent: 59 04 51 to 59 04 54

69
Other Marine Maintenance
Equipment

Deck Scarifier/Planners
Additional information on pages 54 thru 57

• Large area rust, coatings and scale removal

• Air, electric and gasoline motors
• Loaded with T.C. cutters
• Integrated vacuum port

ISSA code equivalent: 55.096.00

IMPA code equivalent: 59 22 31

Grinders
Additional information on pages 20 thru 22

• Lightweight tool for coating removal and

rust removal
• Standard 5/8” 11 arbor multiple abrasive
available
• Air or Electric motors
• 5 or 7” discs
• Dust shrouds are standard
ISSA code equivalent: 55.159.00
IMPA code equivalent: 59 03 01 to 59 03 03
Ventilator/Air Movers
Additional information on pages 3 thru 9

• Portable air filtration

• HEPA filter available
• 2000 cfm to 600 cfm
• Durable and light polyethylene housing
• Air intake - Air exhaust all in one
• Air mover - axial fan
• Nuisance filter available
IMPA code equivalent: 59 14 00 & 59 15 00 & 59 18 00

70
 Other Marine Maintenance
Equipment

Ducting
Additional information on page 7

• Heavy duty vinyl

• Built-in carrying storage bag
• Integrated retaining straps
• 10” or 12” diameter with lengths of 25 or 50 ft.

IMPA code equivalent: 59 14 00 & 59 15 00 & 59 18 00

Pneumatic Wire Brush Rotostrip

Additional information on pages 18 thru 19

• Remove rust, corrosion, mill scale or paint

• Ergonomic, extremely low vibration
• Easy to work with brush
• Light weight, perfect for all tight and hard to
reach areas
• Leaves a significant profile

IMPA code equivalent: 59 05 12

Needles
Additional information on page 42

• 2, 3 and 4mm dia

• 5” or 7” (125 or 178mm) length
• Flat, chisel or pointed tips
• Carbon steel, non spark ber/copper
and stainless steel

IMPA code equivalent: 59 04 86 to 59 92

71
 The Novatek Corporation
www.Novatekco.com
1-610-363-7800

The Novatek Story In 2012, Novatek moved to a new manufacturing

In 1997, a group of specialists were discussing the facility in Pennsylvania. This state of the art facility
state of the surface preparation industry. Their increased productivity, enhanced quality and
conclusion: “the industry needs an American decreased delivery time (95% of orders shipped
equipment manufacturer who not only provides within 24 hours).
equipment for Surface Preparation and Marine Novatek products are proudly manufactured or
applications, but is also capable of engineering in- assembled in the USA. All equipment is individually
novative products for Asbestos and Lead tested to insure operator safety and dependable
Abatement, Nuclear Remediation, and the Air performance. High productivity, unsurpassed dust
Filtration markets.” This ideal company would also collection along with safety and performance has
possess the technical expertise to enable customers always been Novatek’s commitment.
to complete projects safely, efficiently and
profitably. Novatek’s management has held firm to their pledge
to provide the industry’s best products and services.
Novatek has continued to grow and diversify by
“IN IT FOR THE LONG HAUL” foreseeing industry needs, listening to customer’s
feedback and addressing the requirements. Over the
years, Novatek has become the name you recognize,
The Future rely on and most importantly, trust, both now and
Two decades later, Novatek has become a world in the future.
leader in the design and manufacturing of premium
surface preparation and air filtration equipment.

“The Team You Know

With more than 90 years of combined industry
experience and a world-wide customer base,

The Team You Trust”

Novatek uniquely understands the requirements
of the surface preparation industry.

Novatek product lines meet and exceed world wide

standards such as CE marking, can be easily sold
and used safely where ever you are on the globe.

72
 Novatek Corporation
216 Philips Road
Exton, PA 19341 USA
Tel: +1-610-363-7800
Toll Free: 1-866-563-7800
Fax: +1-610-363-9620
Email: Sales@Novatekco.com
www.Novatekco.com

NC15