Release Notes

123Scan Scanner Configuration Utility v6.0

October 2023

Contents
Overview ....................................................................................................................................................... 1
Device Compatibility ..................................................................................................................................... 3
Version History.............................................................................................................................................. 3
Components ................................................................................................................................................ 14
Installation – Requirements ........................................................................................................................ 15

Overview
123Scan is an easy-to-use, PC-based software tool that enables the quick and easy set-up of Zebra
scanners.
123Scan uses a wizard tool to guide users through a streamlined set up process. Once parameters are
set, the values are saved to a configuration file that can be distributed via email, electronically
downloaded via USB cable or used to generate a sheet of programming bar codes that can be scanned.
123Scan can generate multiple reports that can be easily rebranded using Microsoft Word and Access.
Report options include parameters, asset tracking (inventory) information and a validation of scanned
data.
Additionally, 123Scan can display scanned barcode data including non-printable characters. It can
display, optimize and save pictures from an imager scanner. It can also upgrade scanner firmware,
automatically check online to enable support for newly released products, generate a single 2D barcode
for one scan programming and stage large numbers of scanners simultaneously via USB hub(s).

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 1
Functionality,
1. Optimized for first time users.
2. Utility supports the latest scanner updates by performing a check for updates at bootup
3. Generation of an electronic configuration file.
a. Supported programming modes from a configuration file include.
i. Electronic programming
ii. Barcode scanning
b. Maintain a library of configuration files by saving files to your PC.
4. Program Data Formatting Rules
a. Advanced Data Formatting (ADF)
b. Multicode Data Formatting (MDF)
c. Data Parsing
i. UDI
ii. GS1
iii. Blood Bag
d. Drivers Licensing Parsing (USA only)
5. Firmware upgrade of scanners
a. Using a standard USB cable
b. Using a Bluetooth connection to a Cordless Scanner (no cradle)
6. Report generation capabilities.
a. Parameter Report: List of parameters programmed within a configuration file.
b. Activity Report: List of activities performed on a scanner(s) within a screen session.
c. Inventory Report: List of scanners configured and their asset tracking information.
d. Validation Report: Printout of scanned data can include non-printable characters.
e. Statistics Report: List of all statistics retrieved from scanner.
7. Rebranding Reports / Partner Customization.
a. Customize Programming Barcode Sheet after 123Scan outputs it to a Microsoft Word
document.
b. Customize Reports after 123Scan outputs it to a Microsoft Word document.
8. Data Viewer
a. Display scanned barcode data from a USB cable including non-printable characters.
b. Display, optimize and save images from a USB connected imager scanner.
9. Discovered Scanner Tab.
a. Access to scanner asset tracking information.
b. Ability to program scanners simultaneously using powered USB hubs. If a 7-port hub, it
must have at least a 3.5 Amp power supply. For fast staging use 123Scan’s Mass
Upgrade Mode available on the Discovered Scanners tab.
i. Loading a configuration : 10 Scanners
ii. Upgrading firmware : 10 Corded; or 3 to 5 Cordless; or 2 to 5
MP6X00; or 2 to 4 RFD8500
10. Statistics Viewer for scanners that support statistics such as the MP6000, DS3608, LI3678…
11. Remote Management Package
a. Generate SMS (Scanner Management Package) using built in wizard
For more information on 123Scan, including how to videos go to http://www.zebra.com/123Scan.
For support, please visit http://www.zebra.com/support.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 2
Device Compatibility
For the compatible devices list, please visit following page.
https://www.zebra.com/us/en/support-downloads/software/utilities/123scan-utility.html

Version History
Version 6.00.0012 – 10/2023
1. Enhanced Configuration Wizard / Device Selection Screen – Simplified display of
devices. Shortened displayed scanner list to active scanners (currently selling /
supported). Discontinued devices available at bottom of page via a link.
2. Enhanced Advanced Data Formatting (ADF) capabilities
a. Updated ADF “what is this” dialogs. Link now exists to access General
Settings (of ADF rule’s).
b. “Trigger bar code” link added back to ADF rule card (in ADF Criteria dialog).
c. Removed outdated “Send Special Keys” category from ADF Actions under
Action “Send Value”.
d. Bug fix – Added warning dialog if possible loss of data - When copying ADF
actions between rule cards configured with conflicting data length (Full
string length vs compact string length).
3. Enhanced App Developer Report – Added Asset Info, Statistics, Action attributes, ...
in addition to existing scanner parameters.
4. Enhanced Staging Flash Drive Package - Added SP72XX support to Staging Flash
Drive package creation wizard.
5. Optimized Automatic 123Scan Over-the-Air Updater – Added auto retry to updater
(utility and plug-in).
6. Enhanced Barcode Report Layout - Removed list of scanner models displayed in
barcode report. Within next 6 months will be an option in the print settings.
7. Bug Fix – Added support for extended ASCII character “160” to input actions.
8. Bug Fix – Fixed rare issue in downloading a cradle / BT scanner plugin.

Version 6.00.0011 – 07/2023

1. Updates to Advanced Data Formatting (ADF) capabilities
a. Added ADF version info on the main ADF screen, that shows all ADF rule
tabs.
b. Added new criteria called “String match from End position”.
c. When specifying communication protocol within an ADF rule, 123Scan only
shows what is supported in your plugin / firmware version.
d. Update UI element when writing a rule - “View / Edit” link in ADF Actions
replaced with a new “three dots within a circle” icon.
e. Added “Back” icon to close the ADF Actions list.
f. ADF Library Updates
i. Default ADF rules in the library are now read-only and cannot be
deleted from the ADF library.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 3
 ii. To modify default ADF rules – Add rule to a config, modify it and
then save it to library under your desired name.
g. Enhanced automatic plug-in download – Now supports automatic plugin
download when opening a saved configuration file containing ADF rules,
when an exact matching plug-in is not found in the host PC. If required,
plugin automatically downloads. This may take up to 20 seconds.
2. Bug fix – In Chinese localization mode, resolved issue loading configuration with
MDF settings through a USB cable.

Version 6.00.0007 – 04/2023

1. Updates to Advanced Data Formatting (ADF) capabilities
a. Added a new tooltip that displays a summary of the programmed criteria
within an ADF rule. This tooltip is visible from the main ADF screen when
hovering over an action or criteria.
b. ADF Library enhancements
i. Added ADF version # (for a rule) to the ADF library UI.
ii. Added a notes section allowing a user to document the rules
capabilities. The note can be up to 1000 characters.
iii. Added a “ADF Testing Report” for Zebra provided rules, to assist in
learning and testing the ADF rule.
c. Added support for new ADF Actions, listed below,
i. Beep After Delimiter
ii. Stop Beep After Delimiter
iii. Pause After Delimiter
iv. Stop Pause After Delimiter
v. LED Indicator After Delimiter
vi. Stop LED indicator After Delimiter
vii. Vibrate After Delimiter
viii. Stop Vibrate After Delimiter
ix. Send up to Pattern
x. Send from X to Y Positions
d. Enhanced ADF Library to update with new Zebra provided rules when
loading installation software. Note existing customer ADF rules in the library
will still be present after update.
e. Bug fix – Fixed rare issue of incorrect computation of total ADF memory
used.
2. Bug fix – Fixed issue that causes firmware update to fail if attempting a firmware
update while an automatic plug-in update was in progress.
3. Enhanced the “Configuration Summary” screen displayed when opening a config file
from the start screen, it now displays the Windows file name.

Version 6.00.0003 – 02/2023

1. Updates to Advanced Data Formatting (ADF) capabilities,
a. Added capability to re-order ADF rule cards using drag and drop.
b. Updated “Most commonly used” section to reflect new capabilities.
c. Bug fix – Fixed rarely seen issue on incorrectly mapping the ADF custom
characters selected.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 4
 2. Bug fix – Fixed issue in UDI Parsing with AI value 395n.

Version 6.00.0002– 01/2023

1. Enhanced Advanced Data Formatting (ADF) capabilities,
a. Supported Scanners - Scanners supporting new ADF v2.0 enabled firmware
can interact with 123Scan to perform next level data formatting. Our first
scanner supporting ADF v2.0 is the DS8100 series. The DS8100 plugins will
be made available through an automated (in utility) update. After download
into your 123Scan, you must update your scanner to the latest firmware
using the following plugins.
i. DS8108 – Plugin 31 or higher (Available in March of ‘23)
ii. DS8178 – Plugin 41 or higher (Available in March of ‘23)
b. Added to ADF Library with additional sample rules that exercise all the
power of ADF v2.0.
i. Note the new ADF Library must be loaded manually (it is not loaded
with the installation software or automated in utility update.). To
update the library, following the instructions posted on
https://www.zebra.com/us/en/support-
downloads/software/utilities/123scan-utility.html
c. New user interface for ADF rule programming.
d. New user interface for ADF library.
e. Temporarily removed - “Trigger bar code” link in the ADF rule card
f. Temporarily Changed - “Rule Sets” are temporarily included in the filters, as
part of the criteria section’s Boolean logic. This will be fixed (to be made like
previous version of 123Scan) with the “Rule Sets” being pulled out of the
Boolean Logic in a upcoming release in Q1 ’23.
2. Added support for new GS1 AIs (235, 395n, 417, 4310 - 4326, 7040, 8009, 8026). To
access new AIs requires use of 123Scan v6 (or newer) AND updated scanner
firmware. See release notes for support of new AIs.
3. Added “Send All AIs” to GS1 Label Parsing. To access new feature requires use of
123Scan v6 (or newer) AND updated scanner firmware. See release notes for
support of new “Send All AIs”.
4. Added Staging Flash Driver support for NCR 7895 Bioptic scanner.
5. Bug fix – Fixed issue that prevented 123Scan from launching on Windows 10 PC if
FIPS enabled – Fix = Disabled FIPS enterprise setting in 123Scan (not customer
accessible) to allow the successful launch of 123Scan with FIPS enabled PCs. No user
interaction required.
6. Bug fix – Fixed issue using GS1 Data Parsing AIs 7030 to 7039, formerly called 703s.
Note - Older config files using 703s will have to be recreated with each AI from 7030
through 7039 called out individually. If an older config with 703s is opened, it will
automatically be replaced with 7030.
7. Bug fix – DataView now supports scanners with no manufacture date available over
a USB cable.

Version 5.03.0018 – 05/2022

1. Windows 11 support added.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 5
 2. Bug fix – Fixed configuration file generation issue if the config file enables “Preferred
Symbol”.

Version 5.03.0017 – 04/2022

1. SMS package wizard enhancement – Added configurable option to delete SMS
package once the package has been loaded.
2. SMS package wizard enhancement – Added configurable option to force
configuration load from SMS package upon launch of the SMS, even if the
configuration is already present on the scanner.

Version 5.03.0016 – 01/2022

1. SMS Package wizard - Support added for up to eight device groups when creating
SMS packages.
2. Enhanced configuration wizard –
a. Users are no longer able to name a config file “Modified” or “Factory
Default”.
b. Added warning message when user download invalid scanner tone files into
a scanner.
3. Enhanced firmware update
a. Added a link to check the latest plug-in version when attempting to update
firmware.
b. Update warning dialogs for firmware update option 1 when missing existing
plug-in in the host PC.
4. MDF (Multicode Data Formatting) enhancement – Added warning message when
saving and loading configuration file to a scanner with incomplete MDF rules.
5. Reports enhancements.
a. List the parameter number along with the parameter name in Parameter
Reports.
b. Bug fix – Solve opening print option dialog, multiple times in statistics
report.
6. Migrate plug-in download service links to a new production server.

Version 5.03.0014 – 04/2021

1. Modified how 123Scan communicates with a cradle and it’s Bluetooth scanner. For
this device combination, settings are now cloned from the scanner, when both the
scanner and cradle are present simultaneously.
2. Updated Bluetooth terminology from master-slave to central-peripheral.
3. Added support for composite codes to ADF criteria programming screen.

Version 5.03.0012 – 01/2021

1. Enhanced Data Parsing (UDI, GS1, Blood Bag) rule editor
a. Added ability to add up to 35 separators between two AIs or prefix and
suffix.
b. Data Parsing output can now be modified through an ADF rule before being
output to a host.
2. Enhanced Configuration Wizard – Added "What is this" help for Config file name.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 6
 3. CS6080 and all Bluetooth Wireless scanners enhancements
a. “Clone and Modify” button on the 123Scan start screen now works with BT
scanners. This was achieved by removing the set defaults attribute from the
Bluetooth pairing barcode.
b. “Update Scanner Firmware” button on the 123Scan start screen modified to
behave similarly to “Clone and Modify” button for BT scanner. This was
achieved by removing the set defaults attribute from the Bluetooth pairing
barcode.
4. Added programable label ID support on IBM OEM interfaces for select USB cabled
scanners like the MP7000.
5. Bug fix – L10W (EMC tablet) plugin now displays supported models properly.
6. Bug fix – Fixed wrong plug-in name shown on start screen’s “Update Scanner
Firmware” when connected to a LS2208 (Tahoe) scanners.
7. Bug fix – Fixed 123Scan issue when re-opening a 123Scan created USB Staging Flash
Drive for the MP7000 AND DS8108.
8. Bug fix – Fixed CS4070 programmable barcode generation problem on parameter
barcode report.

Version 5.03.0010 – 07/2020

1. Added Data Parsing functionality: 1) UDI Parsing for HIBCC and ICCBBA) and 2) Blood
bag parsing. To access, go to the Modify Data tab within a config file. Functionality
available for select scanner. For 123Scan to display these parsing solutions, a
scanner’s firmware/plugin must support the capability.
a. Add ability to insert Function keys like prefix of F12 and suffix of F11 to the
data parsed output via ADF – see Data Parsing user guide for details.
2. For Bluetooth scanners performing a firmware update and or configuration file load,
added capability to unpair and reboot the scanner at the end of the process. To
leverage this functionality, the scanner’s firmware must support this capability.
3. Added back ability to uncheck this option when printing a programming barcode

4. Prefix Suffix - Removal select GUI Key (CMD Key) functionality from “Send Command
Key” screen.
5. ADF enhancements
a. Added support for upper ASCII 255 (from ASCII 128 to 255)
b. Removal select GUI Keys (CMD Keys) functionality from “Send Command
Key” screen within ADF actions.
6. Added support for screens with 1280x720 resolution.
7. Bug fix - Added ability to change print size (mil size) of programming barcode (fix
based on plugin change)
8. Bug fix – Solved issue at launch in Turkish localization.

Version 5.03.0006 – 04/2020

1. Added Data Parsing functionality (UDI Parsing and GS1 Label Parsing) to the Modify
Data tab for select scanners. For 123Scan to display these parsing solutions, a
scanner’s firmware/plugin must support the capability.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 7
 2. Improved firmware update reliability by adding up to 3 retry attempts if a firmware
update failure occurs.
3. SR plugins (most used plugin) now listed at top of list within configuration wizard.

Version 5.02.0004 – 10/2019

1. Enhanced 123Scan’s automatic check for updates functionality under “Preference”
menu.
a. Updates now automatically install without user intervention, as a
background activity. If desired, this preference can be changed back to
manually approve updates.
b. 123Scan’s update functionality will no longer be affected (taken offline) by
invalid plug-in details.
2. Enhanced battery statistics screen to support DS8178’s PowerCap Capacitor. Note
unsupported statistics will be shown as “999 (NA)”.
3. Enhanced Config Wizard’s search icons (family list search and parameter search) to
enhance visual impact.
4. Enhanced MDF screen within the Config Wizard to display message informing users
to save the configuration including MDF settings, before loading to scanner.
5. Added CUTE settings to the RS232 cable connection wizard.

Version 5.01.0004 – 07/2019

1. Bug fix – Fixed firmware update failure showing up at 1% of process.

Version 5.01.0003 – 05/2019

1. Added DotCode support for ADF and MDF data formatting.
2. Bug fix – Increased 123Scan’s output buffer size of MDF formatting from 500 bytes
to 2000 bytes to match scanner’s capabilities.
3. Work around – When updating a RFD8500’s firmware, do so using the “Mass
Upgrade” mode from the discovered scanners tab (Start screen / Actions /
Discovered Scanners Tab). Place a check in the Mass Upgrade checkbox. Wait for the
reader to be found, then hit update firmware button.

Version 5.01.0002 – 04/2019

1. Enhanced the config file wizard – Simplified the selection of a scanner

:
a. Added recently selected scanners section
b. provide search box to automate scanner selection.
2. 123Scan maintains preferences when updating 123Scan with new installation
software. For example, A4 paper size is maintained when loading new version of
123Scan.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 8
 3. App Developer Report - Added this new report that lists all available attributes
(parameters) and their range of supported values for a plugin. This report is for

application developers. It is accessible from within the

config wizard.
4. RFD8500 Plugin Only - Added capability to toggle the state of the “Application
Connection Password” field based on the state of “Enable Application Password”
parameter.
5. Bug fix – When viewing the CS4070 programming barcode and click “Save as MS
Word” button, barcode now saved as correct 2D format.
6. Bug fix – Fixed text overlap of serial number when printed on DataView report.

Version 5.00.0008 – 11/2018

1. In ADF Rule creation - Added GridMatrix Symbology as available “code type” in
criteria section for supported scanners.
2. Updated LS2208 config file generation process when “My scanner is not connected”.
Now highlight the currently available model versus discontinued model.
3. Fixed CS4070 programming barcode printing – Now only prints 2D like Datamatrix.
4. Enhanced Statistics screen / “Decode Time and Count”– If scanner supports
handsfree and handheld modes, now statistics report calls out scans separately for
handheld and handsfree modes. If scanner supports RFID, it is also reported.
5. Minor Bug fix – When loading configuration after updating firmware on cordless
scanner in the cradle - LED reflects configuration push completed properly.
6. Minor Bug fix – When updating one scanner’s firmware, rarely “Update Another”
button being incorrectly shown on the firmware update dialog screen. Issue
resolved.
7. Configuration file format change from UTF16 to UTF8 to support Chinese
localization.
8. ADF and MDF action’s context menu update - Paste above and Paste below.

Version 5.00.0003 – 09/2018

1. Fixed firmware update error by updated 123Scan’s CoreScanner Driver to a
Microsoft signed USB “SNAPI Imaging driver”.
2. Added back option to send “ASCII Tab and Enter” into MDF actions options.
3. Increased reboot reconnect time from 5 minutes to 8 minutes when updating
firmware available from Start and Discovered Scanners tabs.
4. Fixed “Erase All Rules” barcode which was missing in the programming barcode
report.
5. Bug fix - Added back option to insert the < (less than), > (greater than) and ?
(question mark) characters into ADF String/Trigger code field.
6. Bug fix - Fixed issue related to ADF configuration barcode failing to configure
scanner when it been localized to Chinese Language.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 9
 Version 5.00.0001 – 08/2018
1. Added support (localization) for simplified Chinese language. 123Scan will
automatically open in simplified Chinese, if this is your Window’s default OS locale.
Note to manually change 123Scan’s localization, click Preferences / Language /
Localization and select your desired language. After clicking Apply, restart 123Scan
for the setting to take effect.
2. Name of utility changed from 123Scan2 to 123Scan.

3. Utility’s Windows desktop icon changed from to

4. Bug fix – Fixed 1D bar code printing issue for CS4070 specific parameters.

Version 4.05.0011 – 05/2018

1. Added support for cordless scanner firmware update over Bluetooth (no cradle
involved) from Start screen / Update Scanner Firmware button.
2. Changed default operation mode of SMS Wizard to “Run as Application”.
3. Updated SMS Deployment Checklist to reflect new default operation mode of SMS
Wizard (Run as Application) and Windows 10 support.
4. Added Digimarc GS1 Databar “decode count” to Statistics View.
5. Changed order of scanners displayed on Config Wizard’s “Select your scanner family
from the options below” screen.

Version 4.05.0007 – 02/2018

1. Enabled updating firmware from a custom firmware to a new custom firmware.

Version 4.05.0006 – 11/2017

1. Fixed Mass Upgrade Mode to avoid re-updating a scanner that has already been
updated successfully, within the same Mass Upgrade session. Applies to all
scanners, but fixes an issue with DS8178, DS2278, DS3678.
2. Fixed incorrect display of non-printable characters appearing in slowest decode data
in Statistics View.
3. Add support for the extended ASCII Characters in ADF, ADF now supports any ASCII
character up to 256.
4. Fix for handling incorrectly formatted synapse buffers in the plug-ins.

Version 4.05.0002 – 10/2017

1. Added Scan Speed Analysis (SSA) to statistic view.
2. “USB communication protocol may have changed” dialog no longer used (when
cloning a scanner’s configuration) for select scanners running new firmware.
3. Added support to configure up to four cable settings (communication protocols) in a
configuration file.
4. Fixed issue – Now can enable/Disable MDF Groups via programming barcodes.

Version 4.04.0008 – 06/2017

1. Added a search box to the configuration wizard.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 10
 2. Enhanced bar code data processing in fast HID KB mode.
3. Decreased application launch time and decreased installation package size.
4. Simplified Mass Upgrade mode, available on the Discovered Scanners Tab.
5. Added additional “Time between MDF Codes” options to the Multicode Data
Formatting screen.

Version 4.03.0002 – 12/2016

1. Bug fix - Fixed inconsistency in setting reset to defaults in cordless scanners.
2. Bug fix - Resolved programming barcode issue when bar code report is printed for
configurations with large ADF buffer.
3. Bug fix - Resolved RS6000 support issue introduced in 123Scan v4.2.1.0.
4. Removed Quick Startup Instructions and updated 123Scan Overview.

Version 4.03.0000 – 11/2016

1. Bug fix - Fixed language specific formatting dependency that occurs when “.” is
replaced by “,” in automatic updates process.

Version 4.02.0001 – 09/2016

1. Added support for DS3678 Bluetooth Scanner and cradle into a single plug-in.

Version 4.01.0006 – 06/2016

1. Added Battery Statistics support for scanners supporting Battery Statistics.
2. Added support for MDF (Multicode Data Formatting).
3. Updated ADF screen layout to match new MDF layout.

Version 4.00.0003 – 05/2016

1. Redirected plug-in download process to Zebra site.
2. Removed “Set to Custom Defaults” option from the Printing Options.

Version 4.00.0002 – 03/2016

1. Rebranded to Zebra Technologies.
2. Added Windows 10 Support.

Version 3.07.0002 – 10/2015

1. Added RFD8500 support.
2. Lower max number of simultaneously programmable scanners from 14 to 10
scanners.

Version 3.06.0002 – 05/2015

1. Added support for two new Symbologies: GS1-DataMatrix and GS1-QR Code to
ADF/Data View and Statistics.
2. Added support for new MP6000 firmware update – This version of 123Scan must be
used with all MP6000/6200 firmware released after June 1, 2015.
3. Added support enabling ADF (Advanced Data Formatting) on OCR (Optical Character
Recognition).

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 11
 4. Added support to copy bar code data from the Data View’s scan log into the
Windows Clipboard using a right mouse click.
5. Bug fix – “RS-232 host mode change” programming 2D bar code now printed as two
2D bar codes.
6. Bug fix – Up Carrot ( ^ indicates change from factory default) in Config Wizard
properly displayed.
7. Bug fix – Corrected bar code printed for “IBM Specification level” parameter.

Version 3.05.0002 – 01/2015

1. Optimized the Check for Update process.
2. Added send programming barcode to phone option.
3. Added a report that outputs the updates history.
4. Added support for ADF Rule Sets.
5. Added new ADF commonly used actions group.
6. Added ability to prevent parameter barcodes scanning via a SMS packages.

Version 3.04.0001 – 10/2014

1. Security enhancements to address potential security vulnerability.
2. DS9208 scanner firmware download fix.

Version 3.02.0008 – 03/2014

1. Removed LS2208 (Symbol logo) scanner from the SMS package wizard’s
available/supported scanners.

Version 3.02.0006 – 02/2014

1. Updated DL parsing screen to support multiple date formats and gender format per
field.
2. Added support to select similar scanners with a single click in Discovered scanner
list.
3. Added feature to save Staging flash driver files as packages to PC and track in recent
files list.
4. Color coded plug-in selection across the application (Normal plug-ins black, Custom
plug-ins green, Beta plug-ins red).
5. Dialog displayed when an RS232 host variant is switched. Dialog indicates a number
of other parameters are also switched and how to determine which parameters
were changed.
6. Cordless bug fixes
a. Hot Swap mode now supports cordless scanners.
b. Now maintain pairing between scanner and cradle during set to defaults,
both electronically and via barcodes.
c. Added support for configuring the scanner/cradles as units when loading
and retrieving setting.
7. Include Set Factory defaults and Set Defaults in Print dialog and configuration
options.
8. Windows 8 support.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 12
 Version 3.01.0001 – 10/2013
1. Added ability to display scale weight for the MP6000 within the data view.
2. Added independent display of “Set to Default” parameter based on cordless or
corded scanner.
3. Optimized text in numerous dialogs and menus.

Version 3.00.0010 – 07/2013

1. Added statistics (decode times, barcodes scan count …) displayed in the Statistics
View for select scanner such as the MP6000.
2. Added ability to program DL Parsing rule using the Configuration Wizard.
3. Added MP6000 support. Use USB cable CBA-U51-S16ZAR and plug into the
MP6000's "POS PORT".
4. Added support for generating a MP6000 Staging Flash Drive.
5. Added LI2208 support.
6. Optimized text in numerous dialogs and menus.
7. Added Barcode menu for access to key bar codes.
8. Updated firmware naming convention
a. Old format : CAABQS00-001-R01
b. New format : Release XXX – YYYY.MM.DD (Engineering Name)
c. New format : Release 010 - 2013.06.21 (CAABQS00-001-R01)
9. Release notes now also on firmware upgrade screen.

Version 2.02.0011 – 11/2012

1. Added ability to include DL Parsing parameters within the 2D programming barcode
printout.
2. Fixed Check for Update process. Windows 7 64 bit operating systems now
supported.
3. Within the Configuration Wizard, individual parameters changes tracked. Values
changed from default setting now indicated with a “^”.

Version 2.02.0006 – 07/2012

1. Added ability to generate an SMS Package for use with the Scanner Management
Service.
2. Removed requirement for exact match between scanner and plug-in firmware when
generating a configuration file. Now if your scanner has a newer version of firmware
than present within a plug-in within 123Scan, you can create a configuration file.
3. Simultaneous firmware upgrade for multiple cordless scanners*.
4. Maximum number of simultaneous firmware upgrades typically varies between 3 to
7 cordless scanners in their cradle, depending on PC hardware capabilities.
5. Note – clicking the “Blink scanner LED’s” or “Refresh” button during a cordless
scanner firmware upgrade may halt the firmware upgrade process.
6. Operating System support for Windows 7 64bit.

Version 2.01.0002 – 12/2011

1. UI update on data formatting Prefix/Suffix Screen, added < >.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 13
 2. Updated Set Defaults Barcode Options report, added “Set Factory Defaults” and
“Write to Custom Defaults” barcodes.
3. Updated the print programming barcodes reports: Replace the “Set Defaults”
parameter with “Set Factory Defaults” for RSM 2 scanner printouts. For RSM 1 and
legacy scanner printouts, the Set Default parameter is still utilized.
4. Added two new RFID code types for RFID based ADF rules.

Version 2.01.0001 – 10/2011

1. How to Videos link added to start tab and help menu.
2. Optimized check for updates screen layout.
3. Added support for additional ALT key sequences within the Data Formatting screen.
4. Full name of firmware displayed on the Discovered Scanners tab.

Version 2.01.0000 – 05/2011

1. Cordless scanner plug-in selection process optimized.

Version 2.00.0005 – 02/2011

1. Generate a list of supported scanners models including plug-in name and model of
firmware. See Help menu.
2. Scan Log screen displays scanned data, including hidden characters. See DataView
tab.
3. Image Log screen captures and displays pictures on imaging enabled scanners via a
USB connection.
4. Optimized to support EMEA / APAC sized paper. To permanently set, see
Preferences tab.
5. Firmware upgrade optimized for SNAPI enabled scanners. Total upgrade time is less
than 2 minutes.
6. A uniform naming convention applied to reports and printouts.
a. Configuration file: Config File_Model_Config name_Date Stamp.scncfg
b. Parameter Report: Parameter Settings_Model_Config name.rtf
c. Programming Barcodes: Programming Barcode_Model_Config name.rtf
d. Activity Report: Activity Report_Date stamp_Time stamp.csv
e. Inventory Report: Inventory Report_Date stamp _Time stamp.csv
f. Scanner Output Report: Validation Report_Model_Config name_Date
stamp_Time stamp.rtf
g. Images: Image_Date stamp_Time stamp.bmp

Version 1.01.0011 – 12/2009

1. Initial release of 123Scan Scanner Configuration Utility.

Components
If the default install location is not changed, the components are installed in the following folders:

Component Location

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 14
Application Program Files\Zebra Technologies\Barcode Scanners\123Scan2

Configuration Files Users\Public\Documents\123Scan2\Configuration Files

Activity Reports Users\Public\Documents\123Scan2\Activity Report Database

Data View Reports Users\Public\Documents\123Scan2\Data View Reports

Saved Images Users\Public\Documents\123Scan2\Images

Scanner Plug-Ins ProgramData\123Scan2\Plug-ins

SMS Packages Users\Public\Documents\123Scan2\SMS Packages

Statistics Files Users\Public\Documents\123Scan2\Statistics Files

Staging Flash Drive Users\Public\Documents\123Scan2\Staging Flash Drive Files

Packages

ADF Trigger Barcodes Users\Public\Documents\123Scan2\Barcode Printouts and Parameter Reports

Installation – Requirements
Hardware Requirements
• Pentium Dual-Core E214 1.6GHz or Pentium Mobile Dual-Core T2060 or Pentium
Celeron E1200 1.6GHz.
• 2GB RAM 1.2 GB free hard drive space.
• USB port, 1.1 or higher, for the connection of USB Scanners.
• Minimum display resolution = 1024 by 768 pixels.
NOTE: To use 123Scan, a Windows computer and mouse are required. 123Scan does not
support touch screen use.

Software and Supported Operating Systems

• Supported Operating Systems
o Windows 10 32bit & 64bit
o Windows 11 64bit
• If not present, Microsoft .NET Framework 4.0 client profile will be loaded at time of
initial 123Scan installation.

123Scan can be launched from Start Screen

Start Screen / Apps / Zebra Scanner / “123Scan – Configuration Utility”
In order for 123Scan to download utility and plug-in updates the following requirements must be met:
1. Have connectivity to Internet (direct or via proxy).

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 15
 2. Allow HTTPS data (Port 443 should be open if a firewall is present).
3. The proxy setting should be set in the System Proxy not on Individual applications (Ex. Firefox
Proxy will not work). [ http://windows.microsoft.com/en-US/windows7/Change-proxy-server-
settings-in-Internet-Explorer].
a. This can be confirmed by browsing to
https://www.zebra.com/content/dam/zebra_new_ia/en-us/solutions-
verticals/product/Software/scanner-software/123scan/fact-sheets/data-capture-dna-
123scan-fact-sheet-en-a4.pdf from Internet Explorer. It should download the ZEBRA
SCANNER 123SCAN SPEC SHEET. If not, there is some proxy setting issue.
4. Application needs at least 1Mb of free space in C: drive or the System drive.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Page 16