Scribd
Upload
145 views8 pages

Printer Calibration Guide

1. The document provides instructions for calibrating a printer through a calibration wizard. It describes checking printed patterns and making physical adjustments to the printer if the patterns are not correctly aligned. 2. It details steps to calibrate individual print heads and nozzle groups by measuring distances between lines and adjusting the heads into alignment. 3. The calibration process involves printing test patterns at different speeds and directions, evaluating the patterns, and inputting values to adjust the print heads into the most even alignment with a goal of reaching position "0".

Uploaded by

allwin.c4512i
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
145 views8 pages

Printer Calibration Guide

1. The document provides instructions for calibrating a printer through a calibration wizard. It describes checking printed patterns and making physical adjustments to the printer if the patterns are not correctly aligned. 2. It details steps to calibrate individual print heads and nozzle groups by measuring distances between lines and adjusting the heads into alignment. 3. The calibration process involves printing test patterns at different speeds and directions, evaluating the patterns, and inputting values to adjust the print heads into the most even alignment with a goal of reaching position "0".

Uploaded by

allwin.c4512i
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

1、 Staggered arrangement

Run the tool menu---calibration wizard function.

Angle “Check” to check the printed pattern, see figure:

OK
NG: If the pattern is not in a line, the operator need to do the physical position
adjustment ：

Vertical check, check the printed pattern, see figure:

OK
NG: If the pattern is not vertical, the operator need to do the physical position
adjustment：

Yellow need Yellow head and blue


up a little nozzle calibration: The
16th root of red as the
base line will be yellow
and blue overlap
alignment to the bottom
line.

This
should be
an equal Black nozzle calibration:
distance 1, used with the magnifying glass engraved
between with the red measuring the distance between
two two adjacent lines.
2, to pitch the bottom line and red-based,
mobile black nozzle.
2、 Normal arrangement
Run the tool menu---calibration wizard function.

Angle “Check” to check the printed pattern, see figure:

OK

The first group head

The second group head


NG: If the pattern is not in a line, the operator need to do the physical position
adjustment ：

Vertical check, check the printed pattern, see figure:

OK

The first group head

The second group head

NG: If the pattern is not vertical, the operator need to do the physical position
adjustment：

M of the first group and M of the second


group appear overlap, vertical direction
adjustment head.

After the above operation, click “next”:


Choice speed: High speed; Medium speed or low speed
The horizontal left calibration, perform the print, check the printed pattern, take M as an
Example, see figure:

This position M and K completely to evenness


The choice pattern to the evenness position, and input correspondence numeral, the
method
is to add or subtract to the original foundation. Duplication this step, until the best
position is on “0” position arrangement.

Click “next”, the horizontal right calibration, perform print, check the pattern, take M as
an example, see figure below:

This position M and K completely to


evenness
The choice pattern to the evenness position, and input correspondence numeral, the
method
is adds together in the original foundation. Duplication this step, is most evenness until 0
position arrangement.
Click “next”, the Bidirection calibration, perform print, check the pattern, see figure
below:

This position K completely to evenness

The choice pattern to the evenness position, and input correspondence numeral, the
method
is adds together in the original foundation. Duplication this step, until 0
position arrangement.

Click “next”, step calibration, chose the pass first, perform print, check pattern, see figure
below:

This position line horizontal arrangement is most evenness

The choice pattern to the uneven position, and input correspondence numeral, the method
is adds together in the original foundation. Duplication this step, is most uneven until 0
position arrangement.

Click “next”, vertical calibration, perform print, check pattern, see figure below:

This position line horizontal arrangement is most evenness


The choice pattern to the uneven position, and input correspondence numeral, the method
is adds together in the original foundation. Duplication this step, is most evenness until 0
position arrangement.

Click “next”, complete the calibration.

You might also like