Scribd
Upload
619 views2 pages

E75BMHDX

The document provides specifications for the Yamaha E75B 2-stroke outboard motor model. It lists the key details about the engine in a table format including its maximum output of 55.2 kW, displacement of 1140 cm3, fuel consumption of 34.0 L/h at full throttle, and inclusion of a cooling system and alternator. Dimensions are provided for the overall length, width, height and other measurements. Additional information covers the gear shift type, ratio, and other technical details.

Uploaded by

Josue Guale
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
619 views2 pages

E75BMHDX

The document provides specifications for the Yamaha E75B 2-stroke outboard motor model. It lists the key details about the engine in a table format including its maximum output of 55.2 kW, displacement of 1140 cm3, fuel consumption of 34.0 L/h at full throttle, and inclusion of a cooling system and alternator. Dimensions are provided for the overall length, width, height and other measurements. Additional information covers the gear shift type, ratio, and other technical details.

Uploaded by

Josue Guale
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Enduro model

E75B Performance
Max. prop shaft output
E75B
55.2 kW (75 ps)
Full throttle operating range 4500 – 5500 r/min
Idling speed 750 – 850 r/min
Fuel consumption 34.0 L/h @5500 r/min

Engine
Engine type In-line 3
MODEL CODE (Approved code) Displacement 1140 cm³
E75B 6GJ (6GJK) Bore × stroke 82.0 × 72.0 mm
Compression ratio 4.5 :1
MODELS AVAILABLE Scavenging Loop charge
E75B MHD, EHD, ED Fuel induction system 3 carburetors
Lubrication system Pre-mixed fuel and oil
Oil - fuel mixing ratio 50 :1
Engine oil capacity ―
Ignition system CDI
Ignition timing ATDC 2.0 – BTDC 22.0 deg.
E75BMHDL
Spark plug B8HS-10

2-stroke
Alternator 10 A
Dimension Cooling system Raw-water, thermostatically controlled
MHD: 1337 mm (52.6 in), Exhaust system Through propeller boss
Overall length
EHD: 1203 mm (47.4 in), ED: 725 mm (28.5 in)
Overall width MHD: 398 mm (15.7 in), EHD, ED: 380 mm (15.0 in) Bracket / Drive
EHD, ED L: 1425 mm (56.1 in) / Trim 5 positions

Enduro
MHD L: 1492 mm (58.7 in), Shallow water drive Hydro: ̶
EHD Y: 1472 mm (58.0 in) / Gear shift F-N-R
Overall height
MHD Y: 1543 mm (60.7 in), Gear ratio 2.00 (26/13)
EHD, ED X: 1552 mm (61.1 in) /
Gear oil capacity 0.610 L
MHD X: 1619 mm (63.7 in)
Propeller fitting Spline
L: 516 mm (20.3 in) / MHD L: 521 mm (20.5 in),
Engine transom Propeller rotation Clockwise
Y: 572 mm (22.5 in), X: 643 mm (25.3 in) /
height Shaft length L, Y, X
MHD X: 648 mm (25.5 in)
Minimum distance 600 mm (23.6 in) (ED only)
Steering angle 30 deg. each direction

Dry weight 112 – 121 kg

340 341
E75B Enduro model

Feature Table E75B Optional Accessory E75B


Start in gear protection — (MHD, EHD) Portable fuel tank —
Engine stop switch lanyard — (MHD, EHD) Spark plug —
Security
Over rev. limiter — Steering guide attachment — (ED)
Overheat warning —
Corrosion Chrome plated water pump housing —
prevention Multiple anode — Rigging Accessory E75B
Carburetor — Gauge 6Y7 — (ED)
Power unit
Gasoline Regular 703 — (ED)
Remote control
Instruments (electric start model) — (EHD, ED) 704 — (ED)
Control
Remote control (electric start model) — (ED) Black Series K
K Series K
TALON Series K
Propeller TALON GP Series K
TALON SS Series K
TALON PONTOON Series K
TALON SS4 Series K

2-stroke
Consumes E75B
Yamalube gear oil GL4 —

Enduro
342 343

You might also like