Cable entry via elastic membranes
DE 9325
1.5-2.5 mm², Cu 3~
with terminals
5-pole per pole 6 x 1.5 mm² sol, 4 x 2.5 mm² sol, 3 x 4 mm² sol
11 elastic membranes, closed cable entries, sealing range Ø 6-16 mm
with one cable entry in the bottom, sealing range Ø 6-16 mm
colour: grey, RAL 7035
rated insulation voltage Ui = 690 V a.c./d.c.
material PP (polypropylene)
degree of protection IP 55
width 88 mm
height 88 mm
depth 50 mm
weight 0,120 kg
tightening torque for terminal 1.2 Nm
in accordance with IEC 60670-22
Drawings
Dimension drawing
Detail mass
Box walls
Page 1 of 2
Gustav Hensel GmbH & Co. KG * Gustav-Hensel-Str. 6 * 57368 Lennestadt * Germany * Telefon: +49 (0)2723/609-0 * Fax: +49 (0)2723/60052 * Date: May 29. 2019
Cable entry via elastic membranes
DE 9325
1.5-2.5 mm², Cu 3~
Operating and ambient conditions
Application area Suitable for indoor installation and outdoor installation, protected
against weather influences
Ambient temperature Average value over 24 hours + 35 °C
Maximum value + 40 °C
Minimum value - 25 °C
Relative humidity 50% at 40° C
short-time
100% at 25° C
Fire protection in the event of internal faults Demands placed on electrical devices from standards and laws
Minimum requirements
- Glow wire test in accordance with IEC 60695-2-11:
- 650°C for boxes and cable glands
- 850°C for parts of insulating material necessary to retain current
carrying parts in position
Burning behaviour Glow wire test IEC 60695-2-11: 750 °C
UL Subject 94: V-2
Degree of protection against mechanical load IK07 (2 Joule)
Toxic behaviour halogen-free
silicone-free
"halogen-free" in accordance with the examination of the cables
and insulated wires - corrosiveness of fumes - as per IEC 60754-2
Note: For material properties see technical data.
Page 2 of 2
Gustav Hensel GmbH & Co. KG * Gustav-Hensel-Str. 6 * 57368 Lennestadt * Germany * Telefon: +49 (0)2723/609-0 * Fax: +49 (0)2723/60052 * Date: May 29. 2019