Scribd
Upload
1K views2 pages

Dongfeng 8x4 Brosur

This document provides a technical specification for the Dongfeng Dumper 8x4 vehicle. Some key details include: 1) It has a 16-speed gearbox, 6-cylinder 11.12L engine producing 303kW of power. 2) Dimensions are 11550mm long, 2550mm wide, and 3975mm tall for the canopy dump model. 3) It has a 350L steel fuel tank and full air brake system with ABS and an exhaust brake. 4) Additional features include a sleeper cab, air conditioning, and safety technologies like LDWS.

Uploaded by

Rey Doom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

Dongfeng 8x4 Brosur

This document provides a technical specification for the Dongfeng Dumper 8x4 vehicle. Some key details include: 1) It has a 16-speed gearbox, 6-cylinder 11.12L engine producing 303kW of power. 2) Dimensions are 11550mm long, 2550mm wide, and 3975mm tall for the canopy dump model. 3) It has a 350L steel fuel tank and full air brake system with ABS and an exhaust brake. 4) Additional features include a sleeper cab, air conditioning, and safety technologies like LDWS.

Uploaded by

Rey Doom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL SPECIFICATION

DONGFENG DUMPER 8X4


- Product Name DFH3310A12
- Drive System 8x4 Dumper
- Chasis Dimension (LxWxH) 11550 x 2550 x 3975 (Canopy Dump) mm
- Wheel Base 1350 + 4600 + 1850 mm
- Front Overhang 1500 mm
- Rear Overhang 1100 mm
VEHICLE WEIGHT
- G.V.W 75000 mm
- Curb Weight (vehicle/chassis) 12300 mm
FRAME PROFILE DIMENSION
- Frame Width (Front) 940 mm
- Frame Width (Rear) 850 mm
- Section Height 300 mm
- Section Width 90 mm
ENGINE
- Type DCi420
- Emission Level Euro 3
- Max. Power 303 kW
- Max. Torque 2000 N.m
- Number of Cylinders 6
- Displacement 11.12 L
- Cylinder Bore x Stroke 123 x 156 mm
- System Water cooled, Turbocharged, After cooled cold start
CLUTCH
- Type SACHS
- Plate's Diameter 430 mm
- Operating System Hydraulic control with air booster, pulling
GEAR BOX
- Type ZF16S2530
- Number of Gears 16 forward gears & 2 reverse, synchronization, intarder
- Ratios 13.80, 11.54, 9.49, 7.93, 6.53, 5.46, 4.57, 3.82, 3.02, 2.53, 2.08, 1.74, 1.43, 1.20, 1.00, 0.84, 12.92R1, 10.80R2
AXLE
- Front Load capacity 2x9=18 ton - Elliot type, I beam section
- Rear Load capacity 2x16-32 ton - Hub reduction, tandem axle, with axle lock and wheel lock, ratio 5.92
SUSPENSION
- Front Leaf spring 10pcs with shock absorber
- Rear Leaf spring 13pcs
FUEL TANK
- Type Steel fuel tank
- Capacity 350 L
OTHERS
- Brake System Full air brake system, split pneumatic circuit : parking spring barke acting on rear axles, exhaust brake, ABS
Sleeper cab, forward control type - low roof - all welded steel cab of tilt type - Electric cab tilting - All floating and
- Cab
mechanical cab suspension - Adjustment driver's seat - Air conditioning system
- Tyres 12.00R20
'- The intercooler is 700mm above the ground - The bumper is 760mm above the ground - The exhaust pipe is
- Traficability
650mm above the ground - The air reservoir and fuel tank are 560mm above the ground
- Safety LDWS, Hydraulic retarder

You might also like