Scribd
Upload
812 views1 page

Material - IS 2062 E 350: Standard Specification For Hot Rolled Medium and High Tensile Structural Steel

This document provides information on IS 2062 E 350 hot rolled medium and high tensile structural steel. It has a carbon content of 0.2% maximum and is intended for use in valve, pump, general engineering, construction, and other industries. The steel has a minimum tensile strength of 490 MPa, minimum yield strength of 320 MPa, and minimum elongation of 22%. It also lists the chemical composition and heat treatment process.

Uploaded by

aniketgupta05
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
812 views1 page

Material - IS 2062 E 350: Standard Specification For Hot Rolled Medium and High Tensile Structural Steel

This document provides information on IS 2062 E 350 hot rolled medium and high tensile structural steel. It has a carbon content of 0.2% maximum and is intended for use in valve, pump, general engineering, construction, and other industries. The steel has a minimum tensile strength of 490 MPa, minimum yield strength of 320 MPa, and minimum elongation of 22%. It also lists the chemical composition and heat treatment process.

Uploaded by

aniketgupta05
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Material - IS 2062 E 350

Standard Specification for Hot Rolled Medium and High Tensile Structural Steel
Group - Ferrous Mild Steel Alloy
Sub Group - IS 2062 E 350 Hot Rolled Medium and High Tensile Structural Steel
Application - Intended for Valve, Pump, General Engineering, Construction and Other Industries
Grade Belongs to the Industry - Steel, Plate, Wire, Rod, Tube and Forging

Chemical Composition Heat Treatment


Carbon C% 0.200 max.
Silicon Si % 0.450 max.
Manganese Mn % 1.550 max.
Phosphorus P% 0.045 max. Quench and Temper
Sulphur S% 0.045 max.
Iron Fe % Balance
- - -
- - -
- - - Mechanical Properties
- - - Tensile Strength in Mpa 490 min.
- - - Yield Strength in Mpa 320 min.
- - - Elongation in % 22 min.
- - - Reduction of Area in % -
- - - Hardness in BHN 170 - 207
- - - Impact in Joule -

Cross Reference Table


Material Standard Country Grade Belong to the Industry
1018.0000 SAE USA Steel, Plate, Wire, Rod, Tube and Forging
1018 AISI USA Steel, Plate, Wire, Rod, Tube and Forging
A 830 G10180 ASTM USA Steel, Plate, Wire, Rod, Tube and Forging
G10180 UNS USA Steel, Plate, Wire, Rod, Tube and Forging
SA-29 1018 ASME USA Steel, Plate, Wire, Rod, Tube and Forging
SA-311 1018 Class A ASME USA Steel, Plate, Wire, Rod, Tube and Forging
SA-513 1018 ASME USA Steel, Plate, Wire, Rod, Tube and Forging

Further any inquiry to discuss with Gravity Cast Pvt. Ltd. – Gravity Group of Companies team member Call
on +918469160029, or email marketing@gravitycastindia.com

All information in our data sheets and website is indicative only and is not intended to be a substitute for the full specification from which it is extracted. It is intended to
provide typical values to allow comparison between metal alloy option rather than a definitive statement of mechanical performance or suitability for a particular
application as these will vary with temperature, product type and product application. It is presented apart from contractual obligations and does not constitute any
guarantee of properties or of processing or application possibilities in individual cases. Our warranties and liabilities are stated exclusively in our terms of business.

ONE STOP SOLUTION FOR METAL PARTS

You might also like