Scribd
Upload
73 views2 pages

Eterset 2967

ETERSET 2967 is a low viscosity, brominated epoxy-based vinyl ester resin that provides both good chemical resistance and flame retardancy without additives. It exhibits good chemical resistance and wet-out properties, and laminates can achieve a UL-94 V-0 fire rating. The resin is suggested for use in FRP tanks and pipes for corrosion control and fire retardant applications.

Uploaded by

legiveth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
73 views2 pages

Eterset 2967

ETERSET 2967 is a low viscosity, brominated epoxy-based vinyl ester resin that provides both good chemical resistance and flame retardancy without additives. It exhibits good chemical resistance and wet-out properties, and laminates can achieve a UL-94 V-0 fire rating. The resin is suggested for use in FRP tanks and pipes for corrosion control and fire retardant applications.

Uploaded by

legiveth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA

ETERSET 2967
EPOXY-BASED VINYL
ESTER RESIN
ETERNAL CHEMICAL CO.., LTD.. 2011/04/29

HIGH CORROSION RESISTANT & FLAME RETARDANT


VINYL ESTER RESIN.

Description:
ETERSET 2967 is a low viscosity, non-promoter brominated epoxy-based
vinyl ester resin.

Execpt it has good chemical resistance as ETERSET 2960, the laminates of the
resin can

have good fire retardance without any additives.

Performance:
Exhibits good chemical resistance.
Offers good wet-out.
Laminates of the resin can achieve UL-94 V-0 without any additives.

Suggested use:
FRP tanks and pipes for corrosion control and fire retardance application.

SPECIFICATIONS

Appearance Yellowish liquid

Viscosity-Brookfield at 25℃ 300-600


#3 spindle at 60rpm, cps

Acid value <10

Styrene monomer content, % 32-36

Gel time, min 30-35


(Co(6%)0.5%,MEKPO(55%)1.0%,at 25℃)

1
TYPICAL PERFORMANCE DATA
(for guidance only)
Typical Physical Properties of Cured Casting :
Barcol hardness 35.0
2
Tensile strength Kg/mm 6.0
2
Tensile modulus Kg/mm 304
Elongation, % 2.5
2
Flexural strength Kg/mm 12.5
2
Flexural modulus Kg/mm 320
Heat distortion temp. ℃ 135

Recommended Storage :
Typical storage life at temperature below 25℃ is 4 months. Storage life
decreases with increasing temperature. Avoid exposure to heat sources such as
direct sunlight or steam pipes. During storage periodically aerate air into resin
will extend shelf life.

The information contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this bulletin are made
without guarantee or representation as to results. We suggest that you evaluate these recommendations and suggestions in your own laboratory prior to
use. Our responsibility for claims arising from breach of warranty. negligence. or otherwise is limited to the purchase price of the material.

You might also like