bizhub 4700P/bizhub 4000P Service Manual
Entering the Configuration menu
The Configuration Menu group contains a set of menus, settings, and operations which are
infrequently required by a user. Generally, the options made available in this menu group are used to
configure a printer for operation.
1. Turn off the printer.
2. Press and hold 2 and 6 .
3. Turn on the printer.
4. Release the buttons when the splash screen appears.
Maintenance Counter Value
When this is selected, the printer displays the current value for the maintenance kit counter. This
counter tracks printer usage. A print job containing a single page increments the counter by one, while
a duplex print job increments the counter by two. When the value has reached the rated life of the
maintenance kit, it reminds the user that scheduled maintenance is required. See Maintenance kit.
The counter must be reset after the maintenance kit is installed.
To view the maintenance counter value:
1. From the Configuration menu, navigate to Maintenance Counter Value.
The value is displayed and cannot be changed.
2. Press Back or to return to the Configuration menu.
Reset Maintenance Counter
After installing the maintenance kit, the maintenance counter must be reset.
To reset the maintenance counter:
1. From the Configuration menu, navigate to Reset Maintenance Counter.
2. Press [OK] to reset the counter, or press to exit without resetting the counter.
Once initiated, the operation cannot be canceled.
Print Quality Pages
This option is a limited version of the Print quality pages setting that appears in the Diagnostics menu.
See Print Quality Pages. This setting reports the values of a broad range of printer settings and tests
the ability of the printer to generate acceptable printed output.
To print the report:
1. From the Configuration menu, navigate to Print Quality Pages.
2. Press [OK] to print the pages, or press to exit without printing the pages.
appears on the display. Once started, the printing cannot be
canceled and no buttons are active until the printing completes.
- 148 -
bizhub 4700P/bizhub 4000P Service Manual
Download Emuls
This appears only if at least one download emulator (DLE) is installed. The default setting is Disable.
All download emulators (DLEs) are reenabled automatically after two PORs.
Safe Mode
The settings for this menu item are On and Off (default).
When On, the printer runs in a special mode in which it attempts to continue offering as much
functionality as possible despite known issues.
For example, when On, if the duplex motor is nonfunctional, then the printer prints all jobs in simplex.
Factory Defaults
WarningPotential Damage: This operation cannot be undone.
This setting enables a user to restore all of the printer settings to either the network settings (on
network models only) or to the base printer settings.
To restore Factory Default settings:
1. From the Configuration menu, navigate to Factory Defaults.
2. Select from the available options:
- Restore Baserestores all non-critical base printer NVRAM settings.
- Restore STD Netrestores all network NVRAM settings.
After this setting is changed, the device automatically performs a POR, and restores the appropriate
settings to their factory default values.
Energy Conserve
This setting controls which values appear on the Power Saver menu.
To change the setting:
1. From the Configuration menu, navigate to Energy Conserve.
2. Select On or Off.
If On (default), then the Sleep Mode cannot be turned off. If Off, then appears on the
Sleep Mode menu, and it can be turned off.
Paper Prompts
This controls which tray a change prompt is directed to when paper is sensed to be the wrong size.
Note: The value of Action for Prompts may override the value of this setting.
To change this setting:
1. From the Configuration menu, navigate to Paper Prompts.
2. Select from the available options:
- Auto (default)
- 150 -
