CRS-COMBAT

CRS-COMBATRECONNAISSANCE
COMMUNICATION
FOR TACTICAL OPERATIONS
COMMUNICATION RECONNAISSANCE
FOR TACTICAL OPERATIONS
CRS-COMBAT – COMMUNICATION RECONNAISSANCE FOR TACTICAL OPERATION
CRS-COMBAT – COMMUNICATION RECONNAISSANCE FOR TACTICAL OPERATION

WHY C-ESM & COMINT

WHY C-ESM & COMINT
The use of Communication Intelligence (COMINT) BENEFITS
The use of Communication
and Communications Intelligence
Electronic Support(COMINT) BENEFITS
• Clear situational awareness picture
and Communications
Measures Electronic
(C-ESM) enables Support
support for Command • Clear situational
(map-centric awareness picture
display)
Measures (C-ESM) enables support for Command (map-centric display)
• Agile, expeditionary, rapidly deployable, and
& Control systems.
& Control systems. • Agile,
rapidlyexpeditionary,
re-configurable rapidly
systemdeployable, and
(deployment
rapidly re-configurable system (deployment
< 20 minutes, demobilisation < 5 minutes)
CRS-Combat employs the OODA loop (observe –
CRS-Combat < 20 minutes, demobilisation < solution
5 minutes)
orient – decideemploys the OODA
– act) principle loop (observe –
for C-ESM • Two-men-portable dismounted
orient – decide •• Two-men-portable dismounted solution in
operations from–aact) principle
mission for C-ESM
request through the “On the move” operation when integrated
operations from a mission request
different steps until reporting and re-taskingthrough the after • “On the move” operation when integrated in
vehicles
different stepsofuntil reporting and re-tasking after • vehicles
Multi-functional and multi-operator concept
the fulfilment a mission.
the fulfilment of a mission. •• Multi-functional
Remote control andand multi-operator concept
remote maintenance
Within both Command & Control and Electronic Remote control and remote maintenance
Within both Command •• Outstanding sensitivity and dynamic range,
Warfare support, there &areControl andneeds
manifold Electronic
for • Outstanding sensitivity accuracy
and dynamic range,
Warfare bearing & geo-location
C-ESM. Additionally, previously performed for
support, there are manifold needs
bearing
C-ESM. Additionally, previously performed • Support & forgeo-location accuracyidentification
automated platform
operations can contribute to COMINT knowledge Support for signal
automated platform identification
operations can contribute to COMINT knowledge •• Automated detection, classification and
for future operations.
• Automated
processing of more than 200 analogue andand
signal detection, classification
for future operations.
Combining CRS-Combat with R-ESM and processing of more than
digital transmission modes 200 analogue and
Combining CRS-Combat with R-ESM and • digital transmission modes
Comfortable health monitoring and BITE
jamming capabilities, an integrated Electronic
jamming capabilities, an
Warfare (EW) system is realised.integrated Electronic •• Comfortable
Interface health monitoring
for integration and BITE
of customer
Warfare (EW) system is realised. • Interface
developedfordemodulators
integration ofand
customer
decoders
CRS-Combat is used for tactical reconnaissance developed demodulators and decoders
CRS-Combat is used • Proven software concept allowing for fast
and surveillance, earlyfor tacticaland
warning reconnaissance
collection of • Proven
updatessoftware concept allowing for fast
and upgrades.
and surveillance, early warning
information of the communication signals and collection of
updates and upgrades.
information of the communication signals
according to the geographic area and targets of PRODUCT BACKGROUND
according PRODUCT BACKGROUND
interest. to the geographic area and targets of Saab Sensor Systems Germany introduced the
interest. Saab Sensor
CRS family toSystems Germany
the market in 2005.introduced
Since thentheit is
It provides wideband detection, classification, CRS
It provides wideband detection,andclassification, in usefamily to the applications
in different market in 2005.
and Since then it is
configurations.
direction finding, geo-location, monitoring of in use in upgrades
different applications and configurations.
direction finding, geo-location, and monitoring of Regular guarantee cutting edge
radio signals and other emitters of electro- Regular upgrades guarantee cutting edge
radio signals and other emitters of electro- technology.
magnetic waves. More functionalities like technology.
magnetic waves.
identification and More functionalities
tracking are described likein the
identification
following. and tracking are described in the
following.
APPLICATIONS
APPLICATIONS
CRS-Combat enables decision support by
CRS-Combat
integrating intoenables
C2S and decision
C4ISRsupport
systems. byIt
integrating
contributes into C2S
to the and C4ISR
situational systems.picture
awareness It by
contributes to the situational
providing enhanced knowledge awareness picture by
about position,
providing enhanced knowledge
strength, behaviour, and intent of about
enemy position,
forces.
strength, behaviour, and intent of enemy
It can be deployed as vehicle or shelter integrated forces.
It
ascan
wellbeasdeployed
dismounted as vehicle
solution.or shelter integrated
as well as dismounted solution.
CRS-Combat can be operated as manned and
CRS-Combat
remote solution. can be operated as manned and
remote solution.

© by Saab Sensor Systems Germany GmbH – Specification subject to change – Page 2/4
CRS-COMBAT – COMMUNICATION RECONNAISSANCE FOR TACTICAL OPERATIONS
CRS-COMBAT – COMMUNICATION RECONNAISSANCE FOR TACTICAL OPERATIONS

SYSTEM DETAILS
SYSTEM DETAILS
The situational overview of targets of interest is • Sensor network including communication
The situational overview • among sensors
Sensor network and the control
including station
communication
displayed as lists and on of targets
a map of interest is
(map-centric
• among
High systemsensors and the by
availability control station
fail-over function
displayed as lists and on a map (map-centric
visualisation).
visualisation). • for control
High system stations and sensors
availability by fail-over function
• for controlofstations
Tracking emittersand oversensors
time for improved
Depending on the tasks, different roles can be
Depending onused.
the tasks, differentuses
rolesone
can be • situationalofawareness
Tracking emitters over including
time forvisualisation.
improved
assigned and The system
• situational awareness including
Recording of mission data, raw data visualisation.
assigned and used. The system uses
common human machine interface for the system one
common human machine interface for the system • (wideband of
Recording and narrowband),
mission data, raw and processing
data
management, mission planning, mission
results.
(wideband and narrowband), and processing
management, mission planning,
monitoring, and result analysis. mission
results.
monitoring, and result analysis. TECHNICAL DATA
An intuitive user interface allows for fast and easy TECHNICAL DATA
Frequency range (higher ranges upon request):
An intuitive
system user interface allows for fast and easy
usage.
Frequency range (higher ranges upon request):
system usage. • Monitoring: 9 kHz to 6 GHz
FEATURES Monitoring: 9 kHz300 to 6kHz
GHz
•• Direction finding: to 6 GHz
FEATURES
The complete system is based on wideband • Direction finding: 300 kHz to 6 GHz
Direction finding: Selectable technologies Watson-
The complete
technology for system is based and
both monitoring on wideband
direction Direction
Watt, finding: Selectable
Interferometer, and SRDF technologies Watson-
(super-resolution
technology
finding. for both monitoring and direction
Watt, Interferometer,
direction finding). and SRDF (super-resolution
finding.
• HF, VUHF and SHF frequency range direction finding).
•• HF, VUHFfinding
and SHF frequency range Bearing accuracy: 1° RMS
Direction Bearingreceivers
accuracy:
Virtual 651°inRMS
the standard (narrowband
Direction finding
•• Geo-location with both AoA (angle-of-arrival) Virtual receivers
channels) 65 in theextendable.
configuration, standard (narrowband
• and TDoA (time-difference-of
Geo-location arrival)
with both AoA (angle-of-arrival)
channels) configuration, extendable.
technology (sensor network required)
and TDoA (time-difference-of arrival) Communication between the sensors and the
technology and
• Automated (sensor networkintercept
interactive required)of signals Communication
central between
station: Wi-Fi, the sensors
long-haul andLTE
wireless, the or
Automated
•• Different and interactive
display functions for intercept
emitterofdisplay
signals central
VSAT communication depending on distancesor
station: Wi-Fi, long-haul wireless, LTE
(polar, spectral,
• Different displaylists, map)for emitter display
functions VSAT
and communication depending on distances
requirements.
(polar, spectral,
• Comprehensive online lists, map)
and offline analysis and requirements.
EXTENSIONS
•• Comprehensive
Interface to COMINT online(offline
and offline analysis
analysis) for EXTENSIONS
continuous
• Interface to improvement
COMINT (offline of performance
analysis) forand The system can be extended to provide more
library maintenance
continuous improvement of performance and The system can
functionality withbe extended to provide more
library maintenance
• Listen-in function to received signals functionality with
• R-ESM (radar electronic
•• Listen-in
Declutteringfunction to received
the situational signals
picture by • support
R-ESM (radarmeasures)
electronic
comprehensive
• Decluttering the filtering
situationalaccording
picture tobyareas support measures)
• ECM / EA system (jamming)
and sectors of interest,
comprehensive filtering targets
accordingof interest
to areasand ECM / EA system
•• Integrated SIGINT(jamming)
/ EW.
library
and knowledge
sectors etc. targets of interest and
of interest,
• Integrated SIGINT / EW.
• Alarm functionalityetc.
library knowledge based on filtering and
• Alarmspecificfunctionality
parametersbased on filtering and
• Role specific parameters
concept for different user types like
• Role supervisors,
conceptmonitoring
for different operators,
user types analysts
like
and administrators
supervisors, monitoring operators, analysts
and administrators

© by Saab Sensor Systems Germany GmbH – Specification subject to change – Page 3/4
saab.com Saab Sensor Systems Germany GmbH
Marienbergstr. 96 | 90411 Nuremberg | Germany
 s3g-marketing@saabgroup.com |  +49 911 47725 001
Product sheet –

Saab Sensor Systems Germany GmbH Marienbergstr. 96 | 90411 Nuremberg | Germany

 +49 911 47725 001
 s3g-marketing@saabgroup.com | www.saab.com