GENERAL INFORMATION

MA

OUTLINE OF MODIFICATIONS:
SECTION GI EM

LC

EC
I TB45S engine models have been discontinued.
I TB45E engine has complied with the emission control.
FE
APPLIED FROM: For Peru:
Wagon and Hardtop models JN1TESY614X161001 CL
JN1TFSY614X161001
For the Middle East: JN1KESY614X161001
JN8BY15Y*4X502001 JN1TCSY614X161001 MT
JN6BY11Y*4X500001 Except for the Middle East, Venezuela,
JN8CY15Y*4X462001 Ecuador and Peru:
JN6CY11Y*4X462001 JN1TBSY61Z0536001 AT
JN8BY14Y*4X510001 JN1TCSY61Z0542001
JN8FY15Y*4X520001 JN1TESY61Z0543001
For Venezuela: JN1TFSY61Z0542001 TF
JN1TESY614X712001 JN1KESY61Z0536001
JN1TFSY614X712001 PD
JN1KESY614X712001 Pickup models
JN1TCSY614X712001
For the Middle East:
For Ecuador: FA
JN6BY15Y*4A505101
JN1TESY614X133001
JN6CY15Y*4A505101
JN1TFSY614X133001
JN1KESY614X133001 RA
JN1TCSY614X133001

BR
CONTENTS
ST
CONSULT-II CHECKING SYSTEM .................................2 IDENTIFICATION INFORMATION...................................5
Function and System Application ................................2 Model Variation ............................................................5
Nickel Metal Hydride Battery Replacement.................2 Identification Number...................................................7 RS
Checking Equipment....................................................3 Dimensions ..................................................................9
CONSULT-II Data Link Connector (DLC) Circuit ........3 Wheels & Tires ............................................................9
BT

HA

EL

SE

IDX

GI-1
 CONSULT-II CHECKING SYSTEM

Function and System Application

SMART
AIR
Diagnostic test mode Function ENGINE A/T ABS NATS*1 EN-
BAG
TRANCE
This mode enables a technician to adjust
Work support some devices faster and more accurate by x*2 — — — — —
following the indications on CONSULT-II.
Self-diagnostic results can be read and
Self-diagnostic results x x x x x —
erased quickly.
Current self-diagnostic results and all trouble
Trouble diagnostic
diagnostic records previously stored can be — — — x — —
record
read.
Classification number of a replacement ECU
ECU discriminated
can be read to prevent an incorrect ECU — — — x — —
No.
from being installed.
Input/Output data in the ECU (ECM) can be
Data monitor x x x — — —
read.
This mode enables a technician to set oper-
DTC work support ating conditions to confirm self-diagnosis — x — — — —
status/results.
Diagnostic Test Mode in which CONSULT-II
drives some actuators apart from the ECMs
Active test x — x — — —
and also shifts some parameters in a speci-
fied range.
ECU (ECM) part num-
ECU (ECM) part number can be read. x x x — — —
ber
All registered ignition key IDs in NATS com-
Control unit initializa-
ponents can be initialized and new IDs can — — — — x —
tion
be registered.
ECM checks its own NATS communication
Self-function check — — — — x*3 —
interface.
The results of SRT (System Readiness Test)
DTC confirmation and the self-diagnosis status/results can be x*2 — — — — —
confirmed.
A maximum of four IDs (identifications) can
REMO CONT ID SET be registered in the memory using the
— — — — — x
UP remote controller. These IDs can be also be
confirmed and erased as required.
Conducted by CONSULT-II instead of a
Function test technician to determine whether each sys- x x x x — —
tem is “OK” or “NG” (No Good).
x: Applicable
*1: NATS (Nissan Anti-Theft System)
*2: Not available for diesel engine models.
*3: Except for ZD30DDTi engine models.
Nickel Metal Hydride Battery Replacement
CONSULT-II contains a nickel metal hydride battery. When replacing the battery obey the following:
WARNING:
Replace the nickel metal hydride battery with Genuine CONSULT-II battery only. Use of another bat-
tery may present a risk of fire or explosion. The battery may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble or dispose of in fire.
Keep the battery out of reach of children and discard used battery conforming to the local regulations.

GI-2
 CONSULT-II CHECKING SYSTEM

Checking Equipment
When ordering the below equipment, contact your NISSAN distributor.
MA
Tool name Description
NISSAN CONSULT-II
q1 CONSULT-II unit (Tester EM
internal software: Resi-
dent version 3.3.0) and
accessories LC
q2 Program card AED01C
and AEN00A or AEN00B
(For NATS)
EC
To confirm the best combina-
tion of those softwares, refer
to CONSULT-II Operation
SGI100A FE
Manual.
NOTE: CL
I The CONSULT-II must be used in conjunction with a program card.
CONSULT-II does not require loading (Initialization) procedure.
I Be sure the CONSULT-II is turned off before installing or removing a program card. MT

CONSULT-II Data Link Connector (DLC) Circuit AT

(For TD42Ti engine models and TD engine models with NATS)

TF

PD

FA

RA

BR

ST

RS

BT

HA

TGI001M
EL

SE

IDX

GI-3
 CONSULT-II CHECKING SYSTEM
CONSULT-II Data Link Connector (DLC) Circuit
(Cont’d)
(For ECM equipped models except TD42Ti engine and TD engine with NATS)

TGI002M

INSPECTION PROCEDURE
If the CONSULT-II cannot diagnose the system properly, check the following items.

Symptom Check item

CONSULT-II cannot access any I CONSULT-II DLC power supply circuit (Terminal 8) and ground circuit (Terminal 4)
system. (For detailed circuit, refer to EC section, “MIL & DATA LINK CONNECTORS”.)
I CONSULT-II (DDL) cable
CONSULT-II cannot access indi- I CONSULT-II program card (Check the appropriate CONSULT-II program card for the system.
vidual system. (Other systems Refer to “Checking Equipment” above.)
can be accessed.) I Power supply and ground circuit for the control unit of the system
(For detailed circuit, refer to wiring diagram for each system.)
I Open or short circuit between the system and CONSULT-II DLC
(For detailed circuit, refer to wiring diagram for each system.)

GI-4
 IDENTIFICATION INFORMATION

Model Variation
WAGON AND HARDTOP MODELS
Model Hardtop Station Wagon
MA
2nd seat 2nd center split bench seat
Rear seat arrangement Side facing or 3rd seat
Destina- Steering
Forward facing
Seatless Seatless Forward facing Side facing
EM
Engine
tion position
Front differential H233B
Rear differential
Transmis- H233B/H260 LC
Transfer Grade
sion
S KGNSLAFY61EKA KGNSLAFY61EKQ — — TGNSLAFY61EKQ

TB45E
GL KGNSLEFY61EKA — — — TGNSLEFY61EKQ EC
SGL — — — TGNSLEFY61EKA —
SAFARI KGNSLFFY61EKA — — — —
FS5R50B GL — — — — TGPSLEFY61EKQ FE
SGL — — — TGPSLEFY61EKA —
SAFARI — — — TGPSLFFY61EKA —

Middle
S-SA-
— — — TGPSLHFY61EKA —
CL
LHD TX12A FARI
East TB48DE
GL — — — — TGPSLENY61EKQ

RE5R05A
SGL — — — TGPSLENY61EKA —
MT
SAFARI — — — TGPSLFNY61EKA —
S-SA-
— — — TGPSLHNY61EKA —
FARI
S — — — — TVTSLAFY61NKQ
AT
TD42 FS5R50B GL — — — — TVTSLEFY61NKQ
SGL — — — TVTSLEFY61NKA —
STD — — — — TGNSRAFY61ERQ
TF
TB45E GL — — — TGNSREFY61ERA —
FS5R50B SGL — — — TGNSRFFY61ERA —
GL — — — TGPSREFY61ERA —
PD
TB48DE — — — TGPSRHFY61ERA —
GRX
RE5R05A — — — TGPSRHNY61ERA —
STD — — — — TVTSRAFY61NRQ
FA
RHD
TD42 GL — — — TVTSREFY61NRA —
SGL — — — TVTSRFFY61NRA —
FS5R50B
STD — — — — TWSSRAFY61URQ
RA
GL KWSSREFY61URA — — TWSSREFY61URA —
ZD30DDTi — — — TWSSRFFY61URA —
SGL
KWSSRFAY61URA — — — —
BR
RE4R03A
Except GRX — — — TWSSRHAY61URA —
for the
TX12A STD — — — — TGNSLAFY61ERQ
Middle
East TB45E GL — — — TGNSLEFY61ERA TGNSLEFY61ERQ ST
SGL — — — TGNSLFFY61ERA TGNSLFFY61ERQ
FS5R50B
GL — — — TGPSLEFY61ERA —
SGL — — — TGPSLFFY61ERA — RS
TB48DE GRX — — — TGPSLHFY61ERA —
SGL — — — TGPSLFNY61ERA —
LHD
RE5R05A
GRX — — — TGPSLHNY61ERA — BT
STD — — — — TVTSLAFY61NRQ
TD42 GL — — — TVTSLEFY61NRA —
SGL — — — TVTSLFFY61NRA — HA
FS5R05B
STD — — — — TWSSLAFY61URQ
GL KWSSLEFY61URA — — TWSSLEFY61URA —
ZD30DDTi
KWSSLFFY61URA — — TWSSLFFY61URA TWSSLFFY61URQ EL
SGL
RE4R03A KWSSLFAY61URA — — TWSSLFAY61URA —

SE

IDX

GI-5
 IDENTIFICATION INFORMATION
Model Variation (Cont’d)
PICKUP MODELS
Model Pickup

Steering position LHD

Front differential H233B

Destination Engine
Rear differential
H233B/H260
Transmis-
sion Transfer Grade

STD UGNLLAFY61EKB
TB45E
Middle East FS5R50B TX12A SGL UGNLLEFY61EKB

TD42 STD UVTLLAFY61NKB

PREFIX AND SUFFIX DESIGNATIONS

T GN S L A F Y61 E R A

A: 3rd/2nd seat forward facing

Q: 3rd/2nd seat side facing
P: 3rd/2nd seat seatless
B: Rear body for pickup

R: Except for the Middle East

K: Middle East

E: Multiport fuel injection system engine

N: Diesel engine
U: Turbocharger engine

F: 5-speed floor shift manual transmission

A: 4-speed floor shift automatic transmission
N: 5-speed floor shift automatic transmission

A: S, STD, DX E: GL (SGL), ST, S F: SGL, TI, SAFARI, SE

H: GRX, S-SAFARI, SE

L: LH drive R: RH drive

S: Long wheelbase
L: Leaf spring suspension

GN: TB45E engine VT: TD42 engine

WS: ZD30DDTi engine GP: TB48DE engine

T: Station Wagon
K: Hardtop
U: Pickup

GI-6
 IDENTIFICATION INFORMATION

Identification Number
VEHICLE IDENTIFICATION NUMBER (Chassis number)
Prefix and suffix designations
MA
For the Middle East
EM

LC

EC

FE

CL

MT

AT

TF

PD

FA
SGI993-Q

RA

BR

ST

RS

BT

HA

EL

SE

IDX

GI-7
 IDENTIFICATION INFORMATION
Identification Number (Cont’d)
For Venezuela, Ecuador and Peru
JN1 T E S Y61 4 X XXXXXX

Vehicle serial number

Manufacturing plant
X: Hiratsuka

Model year
4: 2004 model year
5: 2005 model year

S: Long wheelbase (4WD)

Engine type
E: ZD30DDTi F: TB48DE C: TD42

Body type
T: Station Wagon K: Hardtop

Manufacturer
JN1: Japan produced vehicle

Except for the Middle East, Venezuela, Ecuador and Peru

JN1 T B S Y61 Z 0 XXXXXX

Vehicle serial number

0: Stopgap (no meaning)

Z: Except for the Middle East, Venezuela and Ecuador

S: Long wheelbase (4WD)

Engine type
B: TB45E C: TD42 E: ZD30DDTi F: TB48DE

Body type
T: Station Wagon K: Hardtop

Manufacturer
JN1: Japan produced vehicle

GI-8
IDENTIFICATION INFORMATION

Dimensions
PICKUP MODELS FOR THE MIDDLE EAST
Overall length mm (in) 5,100 (200.8)
MA
5,220 (205.5)*1
5,275 (207.7)*2
5,295 (208.5)*3 EM
Overall width mm (in) 1,840 (72.4)
1,880 (74.0)*2

Overall height mm (in) 1,850 (72.8)*4

LC
1,865 (73.4)*5, *6

Front tread mm (in) 1,565 (61.6)*4, *6

1,595 (62.8)*5
EC
Rear tread mm (in) 1,475 (58.1)*4, *6
1,505 (59.3)*5
FE
Wheelbase mm (in) 2,970 (116.9)
*1: With rear step bumper
*2: With front guard bar CL
*3: With front guard bar and rear step bumper
*4: 245/75R16 tires
*5: 7.50R16 tires
*6: 235/85R16 tires MT
Wheels & Tires
AT
PICKUP MODELS FOR THE MIDDLE EAST
Road wheel
TF
Size 16 x 5.50F SDC 16 x 6 1/2JJ

Offset mm (in) 15 (0.59) 30 (1.18)

Tire size 7.50R16C 112/110R, LT235/85R16 114/111Q,

PD
7.50R16-8PRLT 114/112Q LT245/75R16 114/111Q

FA

RA

BR

ST

RS

BT

HA

EL

SE

IDX

GI-9