Wall Window & Ceiling.

qxd 4/03/2008 3:20 PM Page 12

COMPACT 2000 SERIES

FEATURES ANCILLARY EQUIPMENT

The Compact 2000 Series of square plate axial fans can be
mounted in any position. They are a high quality product suitable
for a wide range of applications.

Construction
Metal construction with a high quality polyester epoxy finish as DG - Finger Guards WSK - Backdraft shutter Speed controllers
standard. Impellers have GRP blades; nylon and aluminium Ref. J-9 Ref. K-3 Ref. L-1

blades are an optional extra.

Motors
Type - squirrel cage induction motor.
Sizes 710 and 800 can be fitted with motors to suit virtually any SD - Star/Delta switch VZ - Run-on timer
specification. Ref. L-9 Ref. L-10
Electricity supply - 220-240V, single or 415V, three-phase, 50Hz.
Bearings - sealed-for-life, ball.
Speed-controllable using electronic or auto-transformer.
Weatherproof to IP55.
Operating temperature range -20ºC to +70ºC. Maximum SUGGESTED SPECIFICATION
ambient when being speed-controlled is 40ºC.
See pages N-3/4 for details of these motors. The Compact 2000 Series of plate mounted axial fans shall be
as supplied by Fantech Pty. Ltd.
Some fans are fitted with 2-speed star/delta motors.
The axial impellers shall be of GRP and fitted with TECH-LOCK®
Internal Thermal Protection bushes for easy removal and fitting.
Manual-reset protection is supplied as standard on models from Square plates shall be of metal construction with a polyester
025 to 063; they are an optional extra on the 071 and 80 models. epoxy finish.
All models shall be fully tested to BS848:Part 1, 1980 for air flow
Testing to BS848:Part 2, 1985 for noise.
Air flow tests to BS848:Part 1, 1980.
Noise tests to BS848:Part 2, 1985.

Special Features
Can be mounted at any angle.
HOW TO ORDER
A full guard is fitted as standard to 025. to 063. units only.
Guards on 071. to 080. units are an optional extra.
A flying lead with junction box and Ø20 flexible conduit is fitted
as standard with the 025. to 063. units only.
Derate the performance by at least 25% if air flow direction is
reverse to standard

Wiring Diagram
See page M-6/7, diagram DD 1, 4, 5, 6, 9.
Wall Window & Ceiling.qxd 4/03/2008 3:20 PM Page 13

COMPACT 2000 SERIES

DIMENSIONS 4 Pole
400 24 rev/sec
C E F HP
G
200 A
4 x HØ

Lin stem
Holes

es
100

pSF - Fan Static Pressure, Pa

Sy

564 HP
504 HP
D AØ BØ

454 HP
404 HP
354 HP
314 H
60

40

P
Air Flow
Full guard ‘F’ fitted as standard NOTE: Flying lead fitted as standard
up to size 063. with Ø20 flexible conduit 20
49 52 54 57 62 63
App. App.
Model Dimensions, mm wt. vol. 10
0.2 0.4 0.6 1.0 2.0 4.0
CP.. AØ BØ C† D† E F G HØ kg m3
qV - Volume Flow, m /s 3
dB(A) @ 3m: Outlet Side =
025. 263 285 370 320 98 74 15 6 5.5 0.03
031. 325 330 430 380 95 85 10 9 10 0.04
035. 360 370 485 435 95 85 10 9 10 0.05 4 Pole
040. 410 420 540 490 95 95 12 9 15 0.07 400 24 rev/sec
045. 460 470 575 535 95 95 12 11 17 0.08
050. 510 535 655 615 145 100 15 11 24 0.13 200
Lin tem
pSF - Fan Static Pressure, Pa

714/3
056. 575 600 725 670 145 100 15 11 27 0.16

714/214/1
es
Sys

7
063. 645 670 805 750 140 105 20 11 34 0.22 100

804/1
634
071. 716 760 850 810 * 98 22 14.5 37/61 0.40

564
60

504
080. 809 860 970 910 * 133 22 14.5 0.63

804/2
50/99
454
404
354

40
314

Motor
254

73
Frame Size *E
71
D90S 222 20
68
D90L 238
42 45 49 52 54 58 62 66 78 79
D100L 304 10
D112M 346
0.2 0.4 0.6 1.0 2.0 4.0 6.0 10.0 20.0

D132S 367 qV - Volume Flow, m /s 3

dB(A) @ 3m: Outlet Side =

D132M 405
Note:-
6 Pole
The selections shown here are based on fixed pitch impellers. 150 16 rev/sec
If units with different performances than those shown here are
required, refer to the SQ Series on pages A-15/17.
100
716/3

806/1
806/2
Lin tem

716/
es
Sys

60
2
pSF - Fan Static Pressure, Pa

40
716/1
636
566
506
456
406

20
63
69
44 46 51 57 60 63 67 71
10
0.4 0.6 1.0 2.0 4.0 6.0 10.0
qV - Volume Flow, m /s 3
dB(A) @ 3m: Outlet Side =
Wall Window & Ceiling.qxd 4/03/2008 3:20 PM Page 14

COMPACT 2000 SERIES

TECHNICAL DATA & NOISE LEVELS
Nom. Avg. Max. In-duct Sound Power Levels
Model Speed dB(A) CPE.. 1 ph. CPD.. 3 ph. amb LwdB re 1pW
CP.. r/s @ 3m kW Amps* Frame** kW Amps* °C 63 125 250 500 1k 2k 4k 8k
A 0254 23 42 0.09 0.90 - 0.12 0.50 70∆ 66 64 61 60 56 55 51 45
0314 23 45 0.09 0.90 - 0.12 0.50 70∆ 69 67 63 63 60 57 53 49
0314HP 23 49 0.09 0.90 - 0.12 0.50 70 ∆
65 69 69 62 65 64 57 44
0354 23 49 0.09 0.90 - 0.12 0.50 70∆ 71 70 65 67 66 59 55 54
0354HP 23 52 0.09 0.90 - 0.12 0.50 70 ∆
68 72 72 65 68 67 60 47
0404 23 52 0.25 1.80 - 0.37 1.40 70 ∆
71 72 68 70 69 64 61 56
0404HP 23 54 0.25 1.80 - 0.37 1.40 70∆ 68 70 70 69 71 69 61 52
0406 15 44 0.12 1.05 - 0.16 0.93 70 ∆
67 63 66 63 61 53 48 43
0454 23 54 0.25 1.80 - 0.37 1.40 70∆ 74 75 72 71 70 67 64 56
0454HP 23 57 0.25 1.80 - 0.37 1.40 70 ∆
71 73 73 72 74 72 64 55
0456 14 46 0.12 1.05 - 0.18 0.68 70∆ 66 64 66 64 61 58 54 45
0504 23 58 0.55 3.60 - 0.55 1.75 70 ∆
77 81 78 73 72 72 69 62
0504HP 23 62 0.55 3.60 - 0.55 1.75 70∆ 73 74 74 76 79 76 74 62
0506 14 51 0.18 1.55 - 0.25 0.94 70 ∆
72 67 69 68 69 63 57 51
0564 23 62 0.75 4.90 - 0.75 2.00 70∆ 81 83 80 79 78 75 73 67
0564HP 23 63 0.75 4.90 - 0.75 2.00 70 ∆
76 74 77 78 80 77 75 66
0566 14 57 0.25 2.20 - 0.25 0.94 70∆ 76 73 76 76 73 71 60 56
0634 23 66 - - - 1.50 4.30 70 ∆
81 82 86 84 80 78 77 72
0636 14 60 0.55 6.00 - 0.55 2.00 70 ∆
83 80 78 77 76 73 68 59
0714/1 23 68 - - D100La 2.20 4.60 40 90 80 84 83 83 82 81 76
0714/2 23 71 - - D100Lb 3.00 6.20 40 87 84 87 87 86 84 84 75
0714/3 23 73 - - D112M 4.00 8.00 40 91 90 93 91 87 86 83 77
0716/1 16 63 - - D90S 0.75 2.20 40 85 79 77 83 78 73 71 63
0716/2 16 63 - - D90L 1.10 3.00 40 84 81 82 83 78 73 72 61
0716/3 16 69 - - D100L 1.50 3.30 40 90 84 85 89 86 79 72 68
0804/1 23 78 - - D132S 5.50 10.50 40 90 83 89 92 95 93 88 81
0804/2 23 79 - - D132M 7.50 15.80 40 96 93 94 95 94 93 89 82
0806/1 16 67 - - D100L 1.50 3.30 40 90 86 85 87 82 77 73 65
0806/2 16 71 - - D132S 3.00 6.30 40 92 84 88 89 87 84 78 69
* Amperages shown are a guide only, refer to our Sales Department for accurate figures at time of order.
** Use inverter controllers for variable speed.
Electrical data in bold type refers to fans that are fitted with 2-speed star/delta motors as standard. High speed data shown.
∆
Maximum ambient is 50°C when being speed controlled.
The In-duct Sound Power Levels are for the Outlet Side of the fan; Inlet Side values are generally 1-2 dB lower. The levels are based on the fans operating at approximately
50% of peak pressure.
 HPA Plate Mounted
Axial Fans
The Eltafantech Plate Mounted HPA fans are designed around an advanced, high performance impeller with excellent
performance characteristics. Motors are matched to the aerodynamic performance of the impeller for maximum efficiency.

d supply
applications in the building services sector such as warehousing, restaurants, sports halls, industrial units, schools and
kitchen extract to agricultural markets.

Features & Benefits

Durability Motors
A tough epoxy paint finish ensures adequate These are protected to IP44 which means Very efficient for moving high volumes of air
protection against corrosion. they are highly resistant to dust and water at relatively low pressures. Air volume flow
ingress. Motors have Class F insulation. rates of up to 4.0 m³/sec and static pressures
Stability Two, four and six pole motors are available. of up to 300Pa are attainable.
Suitable for operating temperatures of up to
The motor mounting brackets are constructed +55 °C and up to 95% humidity. Bell mouth inlet reduces resistance to create
in the form of a welded wire framework which a smoother airflow. The HPA is fully speed-
acts as a finger guard. The mounting brackets controllable allowing levels of ventilation to
are electroplated prior to black epoxy powder Adaptable be adjusted according to requirements and
coating to provide added protection. eliminating wasted energy expenditure.
The HPA is available from stock in 9 standard
sizes from 250mm to 710mm.

Condensation drainage holes are built into the

motors as standard. These exclude the build
up of condensation within the motor when
operating in predominantly humid surroundings
or considerable changes in temperature.

Mounting
The HP
angle making them suitable for mounting in
any position enabling greater flexibility for
site installations.

Tested to the very latest

standards
All units are tested to ISO 5801:1997(airside
Ease of installation Warranty
performance) and to BS 848 Pt 2:1985
Fans are supplied with an integral IP54 (sound performance). All performance Each HPA unit has a 12 month warranty.
terminal box and motor side guard, which and sound data is based on Form A Plate
allows the fan to be positioned. conveniently Mounted test arrangement.
to incoming electrical inputs.
Safety
Reliability All HPA units have integral thermal-
Motors have sealed-for-life bearings designed overload protection which prevents the
to operate at any angle. motor from overheating.

4
HPA Plate Mounted H

Specification
Axial Fans
H
Plates Motors
Each HPA plate mounted fan includes a one piece bell mouth inlet and Motors are highly efficient, external rotor motors matched to the
mounting plate manufactured in powder coated steel for rigidity with aerodynamic performance of the impeller. Motors have sealed for life,
4 fixing points for simple installation. maintenance free ball bearings enabling the fan to be mounted at
any angle.
For added rigidity each unit includes a steel support frame to support
the motor and impeller within the mounting plate. Motors are protected to IP44 with Class F insulation and are suitable
for ambient operating temperatures of up to +55° C and 95% W
maximum relative humidity and are wound for 230V/1Ph/50Hz or
Guards 400V/3Ph/50Hz supply.
Each HPA includes a finger protection guard to IS013582 for mounting
the fan onto the inlet ring. All motors are pre-wired to an IP54 terminal box, incorporate built in
Guards are electroplated prior to painting and finished in a tough thermal overload protection and are suitable for speed control.
epoxy polyester paint RAL 9005 Black.
Motors and impellers are balanced to Grade G6.3.

Impellers A
All impeller blades are pressed steel sickle bladed type with the
exception of HPA 250mm and 300mm models which are conventional
pressed steel blades, all providing excellent performance characteristics
and low noise levels.
Impellers are epoxy painted colour RAL 9005 black and are welded to
the motor rotor.

Dimensional Data
D
E CTS

AIRFLOW
ØC
ØB
ØA

4 HOLES Ø10 G H

Product Weight
A B C D E F G H
Code kg
HPA200/*-*A 200 210 215 312 260 52 60 15 2.5
HPA250/*-*A 250 260 265 370 320 90 60 15 3
HPA315/*-*A 315 325 360 430 380 90 60 15 3.3
HPA350/*-*A 350 360 395 485 435 90 60 15 4.9
HPA400/*-*A 400 410 450 540 490 110 60 15 7.2
HPA450/*-*A 450 460 500 575 535 110 60 15 7.2
HPA500/*-*A 500 510 560 655 615 115 60 15 9.5
HPA560/*-*A 560 575 625 725 670 115 60 15 10.5
HPA630/*-*A 630 645 705 805 750 125 60 20 15
HPA710/*-*A 710 725 765 850 810 130 135 27 25

Add 2, 4 or 6 for Add 1 or 3 for

number of poles electrical phase

5
HPA Performance Curves
& Performance Data
HPA200/2-1A, HPA250/2-1A, HPA315/2-1A

200

HPA200/2-1A

HPA250/2-1A
175

HPA315/2-1A

150

125
Static Pressure - Pa

100

75

50

25

0
0.00 0.10 0.20 0.30 0.40 0.50 0.60

Airflow, m³/s @ Static Pressure, Pa.

Product
Code
0 25 50 75 100 125 150 175 200
HPA200/2-1A 0.175 0.162 0.142 0.095 0.062 0.032 0.014 - -
W/(L/s) 0.312 0.339 0.389 0.602 0.946 1.880 4.508 - -
HPA250/2-1A 0.354 0.326 0.258 0.168 0.142 0.121 0.101 0.081 0.056
W/(L/s) 0.231 0.250 0.325 0.546 0.668 0.807 0.993 1.290 1.940
HPA315/2-1A 0.547 0.503 0.451 0.370 0.259 0.164 - - -
W/(L/s) 0.237 0.258 0.294 0.388 0.632 1.101 - - -

Motor Electrical Data

220-240V/1Ph/50Hz Sound
Product Speed Level Weight
Code (rev/min) Input dB(A) @ kg
FLC SC
Power 3m
Amps Amps
Watts
HPA200/2-1A 2300 55 0.26 0.80 41 2.5
HPA250/2-1A 2400 80 0.40 1.20 51 3.0
HPA315/2-1A 2300 145 0.66 2.00 51 3.3

6
HPA Performance Curves
& Performance Data
HPA250/4-1A, HPA315/4-1A, HPA350/4-1A

175

HPA250/4-1A

HPA315/4-1A
150

HPA350/4-1A

125
Static Pressure - Pa

100

75

50

25

0
0.00 0.20 0.40 0.60 0.80

Airflow, m³/s @ Static Pressure, Pa.

Product
Code
0 25 50 75 100 125 150 175
HPA250/4-1A 0.218 0.157 0.088 0.057 0.015 - - -
W/(L/s) 0.218 0.306 0.568 0.892 3.427 - - -
HPA315/4-1A 0.423 0.370 0.203 0.162 0.128 0.088 0.016 -
W/(L/s) 0.186 0.211 0.417 0.541 0.709 1.073 6.071 -
HPA350/4-1A 0.726 0.672 0.582 0.437 0.322 0.240 0.169 0.096
W/(L/s) 0.180 0.201 0.243 0.345 0.492 0.690 1.024 1.911

Motor Electrical Data

220-240V/1Ph/50Hz Sound
Product Speed Level Weight
Code (rev/min) Input dB(A) @ kg
FLC SC
Power 3m
Amps Amps
Watts
HPA250/4-1A 1380 50 0.23 0.70 46 3.0
HPA315/4-1A 1350 75 0.35 1.10 49 3.3
HPA350/4-1A 1380 140 0.65 2.00 53 4.9

7
HPA Performance Curves
& Performance Data
HPA400/4-1A, HPA450/4-1A, HPA500/4-1A, HPA560/4-1A
150

HPA400/4-1A

HPA450/4-1A

HPA500/4-1A
125
HPA560/4-1A

100
Static Pressure - Pa

75

50

25

0
0.00 0.50 1.00 1.50 2.00

Airflow, m³/s @ Static Pressure, Pa.

Product
Code
0 25 50 75 100 125 150
HPA400/4-1A 1.083 0.983 0.874 0.613 0.435 0.311 0.124
W/(L/s) 0.160 0.188 0.223 0.353 0.536 0.800 2.260
HPA450/4-1A 1.365 1.245 1.134 0.971 0.641 0.417 0.182
W/(L/s) 0.178 0.204 0.233 0.285 0.471 0.777 1.951
HPA500/4-1A 1.964 1.839 1.687 1.493 1.310 - -
W/(L/s) 0.207 0.232 0.263 0.308 0.358 - -
HPA560/4-1A 1.969 1.765 1.635 1.523 1.372 - -
W/(L/s) 0.270 0.330 0.367 0.400 0.451 - -

Motor Electrical Data

220-240V/1Ph/50Hz Sound
Product Speed Level Weight
Code (rev/min) Input dB(A) @ kg
FLC SC
Power 3m
Amps Amps
Watts
HPA400/4-1A 1380 180 0.82 2.5 59 7.2
HPA450/4-1A 1350 250 1.20 3.6 59 7.2
HPA500/4-1A 1300 420 1.95 5.9 63 9.5
HPA560/4-1A 1300 550 2.55 7.7 66 10.5

Note: The HPA560/4-1A is not suitable for speed control applications.

8
HPA Performance Curves
& Performance Data
HPA400/6-1A, HPA450/6-1A, HPA500/6-1A, HPA560/6-1A, HPA630/6-1A
175

HPA400/6-1A
HPA450/6-1A
HPA500/6-1A
150 HPA560/6-1A
HPA630/6-1A

125
Static Pressure - Pa

100

75

50

25

0
0.00 0.50 1.00 1.50 2.00 2.50 3.00

Airflow, m³/s @ Static Pressure, Pa.

Product
Code
0 25 50 75 100 125 150 175
HPA400/6-1A 0.808 0.661 0.328 0.197 - - - -
W/(L/s) 0.122 0.159 0.341 0.613 - - - -
HPA450/6-1A 1.006 0.840 0.508 0.301 0.126 - - -
W/(L/s) 0.160 0.201 0.350 0.623 1.603 - - -
HPA500/6-1A 1.525 1.336 1.093 0.603 0.329 0.094 - -
W/(L/s) 0.147 0.177 0.223 0.427 0.834 3.211 - -
HPA560/6-1A 1.473 1.312 1.114 0.839 0.601 0.368 - -
W/(L/s) 0.199 0.223 0.273 0.399 0.618 1.116 - -
HPA630/6-1A 2.597 2.306 2.023 1.711 1.366 1.021 0.696 0.349
W/(L/s) 0.180 0.207 0.245 0.304 0.407 0.586 0.923 1.986

Motor Electrical Data

220-240V/1Ph/50Hz Sound
Product Speed Level Weight
Code (rev/min) Input dB(A) @ kg
FLC SC
Power 3m
Amps Amps
Watts
HPA400/6-1A 920 110 0.50 1.50 49 7.2
HPA450/6-1A 920 150 0.70 2.10 51 7.2
HPA500/6-1A 900 230 1.15 3.50 59 9.5
HPA560/6-1A 900 330 1.70 5.10 61 10.5
HPA630/6-1A 900 520 2.50 7.50 66 15.0

9
 HPA Performance Curves
& Performance Data
HPA500/4-3A, HPA560/4-3A, HPA630/4-3A
300

HPA500/4-3A
275
HPA560/4-3A

250 HPA630/4-3A

225

200
Static Pressure - Pa

175

150

125

100

75

50

25

0
0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50

Airflow, m³/s @ Static Pressure, Pa.

Product
Code
0 25 50 75 100 125 150 175 200 250 300
HPA500/4-3A 2.014 1.881 1.741 1.591 1.415 1.179 0.872 0.640 0.481 0.222 -
W/(L/s) 0.206 0.232 0.262 0.298 0.349 0.441 0.643 0.938 1.321 3.183 -
HPA560/4-3A 2.417 2.263 2.122 1.976 1.811 1.611 1.372 1.125 0.908 0.550 0.198
W/(L/s) 0.224 0.252 0.281 0.314 0.358 0.425 0.531 0.695 0.919 1.710 5.412
HPA630/4-3A 3.106 2.934 2.776 2.625 2.475 2.320 2.151 1.960 1.734 1.254 0.910
W/(L/s) 0.231 0.255 0.280 0.306 0.336 0.371 0.415 0.477 0.569 0.889 1.347

Motor Electrical Data

380-415V/3Ph/50Hz Sound
Product Speed Level Weight
Code (rev/min) Input dB(A) @ kg
FLC SC
Power 3m
Amps Amps
Watts
HPA500/4-3A 1300 450 0.90 2.70 63 9.5
HPA560/4-3A 1300 600 1.20 3.60 75 10.5
HPA630/4-3A 1320 800 1.60 4.80 69 15.0

10
HPA Performance Curves
& Performance Data
HPA500/6-3A, HPA560/6-3A, HPA630/6-3A, HPA710/6-3A
200

HPA500/6-3A

HPA560/6-3A

175 HPA630/6-3A

HPA710/6-3A

150

125
Static Pressure - Pa

100

75

50

25

0
0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4 .00 4.50

Airflow, m³/s @ Static Pressure, Pa.

Product
Code
0 25 50 75 100 125 150 175 200
HPA500/6-3A 1.489 1.316 1.055 0.555 0.316 0.085 - - -
W/(L/s) 0.140 0.168 0.222 0.462 0.874 3.617 - - -
HPA560/6-3A 1.597 1.438 1.233 0.970 0.738 0.533 0.290 - -
W/(L/s) 0.210 0.233 0.284 0.402 0.592 0.900 1.811 - -
HPA630/6-3A 2.916 2.651 2.342 1.949 1.512 1.140 0.828 0.530 -
W/(L/s) 0.199 0.222 0.261 0.334 0.469 0.674 0.993 1.657 -
HPA710/6-3A 4.130 3.929 3.693 3.400 3.001 2.399 1.768 1.342 1.011
W/(L/s) 0.216 0.235 0.259 0.292 0.345 0.456 0.659 0.918 1.283

Motor Electrical Data

380-415V/3Ph/50Hz Sound
Product Speed Level Weight
Code (rev/min) Input dB(A) @ kg
FLC SC
Power 3m
Amps Amps
Watts
HPA500/6-3A 900 230 0.55 1.7 59 9.5
HPA560/6-3A 900 330 0.90 2.7 61 10.5
HPA630/6-3A 900 550 1.60 4.8 66 15.0
HPA710/6-3A 900 900 1.90 5.7 71 25.0

11
 HCA Short Cased
Axial Fans
The Eltafantech Short Cased HCA axial fans are a compact, lightweight unit designed around an advanced, high
performance impeller with excellent performance characteristics. Motors are matched to the aerodynamic
performance of the impeller for maximum efficiency.

building services sector such as warehousing, restaurants, sports halls, industrial units, schools and kitchen extract
to agricultural markets.

Features & Benefits

Durability Stability
A tough epoxy paint finish ensures The motor mounting brackets are
adequate protection against corrosion. constructed in the form of a welded
The mounting brackets wire framework.
are electroplated prior to black epoxy
powder coating to provide added
protection.

Motors
These are protected to IP44 which means
Reliability
they are highly resistant to dust and Motors have sealed-for-life bearings.
water ingress.

Very efficient for moving high volumes of

air at relatively low pressures.

Adaptable
The HCA is available from stock in 5
standard sizes from 315mm to 500mm.

HCA fans have condensation drainage

holes built into the motors as standard.
These exclude the build up of condensation
within the motor when operating in
predominantly humid surroundings or
considerable changes in temperature.

Mounting
Suitable for duct mounted applications.

Safety Tested to the very latest

All HCA units have integral thermal- standards
overload protection which prevents the
All units are tested to ISO 5801:1997
motor from overheating. (airside performance) and to
BS 848 Pt 2:1985 (sound performance).
Ease of installation
Fans are supplied with an integral IP54 Warranty
terminal box and motor side guard, which Each HCA unit has a 12 month warranty.
allows the fan to be positioned conveniently
to incoming electrical inputs.

12
HCA Short Cased H

Axial Fans
Specification
W
Casing Impellers
The compact design allows for easy installation especially within All impeller blades are pressed steel sickle bladed type providing
restricted spaces. excellent performance characteristics and low noise levels.

Impellers are epoxy painted colour RAL 9005 black and are welded to
Motors the motor rotor.
Motors are highly efficient, external rotor motors matched to the
aerodynamic performance of the impeller. Motors have sealed for life,
maintenance free ball bearings enabling the fan to be mounted at
any angle.
A
Motors are protected to IP44 with Class F insulation and are suitable
for ambient operating temperatures of up to +55° C and 95%
relative humidity and are wound for 230V/1Ph/50Hz or
400V/3Ph/50Hz supply.

All motors are pre-wired to an IP54 terminal box, incorporate built-in

thermal overload protection and are suitable for speed control.
Motors and impellers are balanced to Grade G6.3.

Dimensional Data
ØB
C
ØA D

AIRFLOW

E No HOLES ØF
ON G PCD

Product Weight
A B C D E F G
Code kg
HCA315/*-*B 315 382 180 8 8 9.5 356 3.3
HCA350/*-*B 350 421 180 8 8 9.5 395 4.9
HCA400/*-*B 400 460 190 9 12 9.5 438 7.2
HCA450/*-*B 450 515 190 9 12 9.5 487 7.2
HCA500/*-*B 500 567 250 9 12 9.5 541 9.5
HCA560/*-*B 560 635 250 9 16 11.5 605 10.5
HCA630/*-*B 630 705 250 9 16 11.5 674 15

Add 2, 4 or 6 for Add 1 or 3 for

number of poles electrical phase

13
 HCA Performance Curves
& Performance Data
HCA315/4-1B, HCA350/4-1B, HCA400/4-1B, HCA450/4-1B, HCA500/4-1B
100

HCA315/4-1B
HCA350/4-1B
HCA400/4-1B
HCA450/4-1B
HCA500/4-1B
80
Static Pressure - Pa

60

40

20

0
0.00 0.50 1.00 1.50 2.00

Airflow, m³/s @ Static Pressure, Pa.

Product
Code
0 25 50 75 100
HCA315/4-1B 0.629 0.629 0.629 - -
W/(L/s) 0.125 0.125 0.125 - -
HCA350/4-1B 0.662 0.616 0.552 - -
W/(L/s) 0.203 0.229 0.264 - -
HCA400/4-1B 1.054 0.952 0.839 0.623 0.428
W/(L/s) 0.156 0.186 0.220 0.304 0.455
HCA450/4-1B 1.476 1.362 1.248 1.087 -
W/(L/s) 0.159 0.185 0.214 0.259 -
HCA500/4-1B 1.692 1.461 1.202 - -
W/(L/s) 0.136 0.162 0.205 - -

Motor Electrical Data

220-240V/1Ph/50Hz Sound
Product Speed Level Weight
Code (rev/min) Input dB(A) @ kg
FLC SC
Power 3m
Amps Amps
Watts
HCA315/4-1B 1350 75 0.35 1.10 49 3.3
HCA350/4-1B 1380 140 0.65 2.00 53 4.9
HCA400/4-1B 1380 180 0.82 2.50 59 7.2
HCA450/4-1B 1350 250 1.20 3.60 59 7.2
HCA500/4-1B 1300 420 1.95 5.90 63 9.5

14
Wall Window & Ceiling.qxd 4/03/2008 3:20 PM Page 15

SQ SERIES

ANCILLARY EQUIPMENT

C..P - Circular silencers FG - Finger guards Inverters

FEATURES Ref. H-4/8 Ref. J-9 Ref. L-9

The SQ Series of wall mounted square plate axial fans is suitable

for a wide range of applications. SMOKE-SPILL APPLICATIONS
Sizes range from 315 to 1250mm diameter, with a wide choice of The SSQ Series has been tested to meet the air performance
speeds available. All square plates incorporate a bell-mouth and high temperature test requirements of Standards
entry, the direction of air flow must be nominated at time of AS/NZS1668.1:1998 and AS/NZS4429:1999; both tests are
order. mandatory.
For advice on smoke-spill wiring requirements refer to the above
Construction Standards.
The casings are of mild steel, hot dip galvanised after See page C-7 for details of the smoke-spill range available.
manufacture. Impeller blades shall be injection moulded GRP,
nylon or pressure die-cast aluminium. Anti-static blades for
explosion risk applications are also available.
SUGGESTED SPECIFICATION
The SQ Series fans shall be of the SQA/SQB design(s) as
Motors manufactured by Fantech Pty Ltd.
Type - squirrel cage induction motor which can be selected to All performances shall be based upon BS848:Part 1, 1980 or
suit virtually any specification. ISO5801:1997 for airflow and BS848:Part 2, 1985 for noise.
Electricity supply - single or three-phase to suit a wide range of Casings shall be hot dip galvanised mild steel. Impellers shall
voltages and frequencies. be of glass reinforced plastic (GRP), nylon, aluminium or anti-
Bearings - ball. static as required; GRP is standard where selection permits.
See pages N-3/4 for details on motors. Other special requirements should be specified at time of
quotation (refer to Special Features.)
Internal Thermal Protection
Can be provided as an optional extra.
SPECIAL NOTE
Testing
Quick select envelope curves are shown on pages A-16/17
Air flow Testing: - Accurate selections can be made from pages C-11/78 or from
To 1000mm diameter - BS848:Part 1, 1980 the CD.
1250mm diameter - ISO5801:1997 Selections should be made using Type A Installation.
Noise data is based on tests to BS848:Part 2, 1985. Pages C-2/8 provide detailed information on these products.
An example of how to use the curves is shown on page C-9.
Special Features
This product is suitable for a wide range of applications, HOW TO ORDER
including handling ambient filtered air to hot, toxic and noxious
gases. All variations to standard air conditions must be SQ -
nominated at time of enquiry.
SQ - square plate
Inlet or discharge guards are optional extras.
Air flow direction
Hazardous fume applications
SQ Series fans can be made to accommodate requirements for A B
corrosive fume and explosion risk applications. Special coatings Fan diameter in cm
and alternative materials, such as stainless steel, are available Fan speed, no. of poles
as well as increased safety motors and anti-static impellers. Our Hub diameter code
sales engineers are able to assist with requirements, which must A =150 D = 400
be specified at time of quotation. B = 250 F = 550
C = 350 G = 255
Wiring Diagram Aluminium blades, A
See pages M-6/7, diagrams DD 1, 2, 3, 8. GRP, P
Nylon, N
Weights Anti-static blades E
Go to pages C-112/113 to determine unit weights. No. of blades
Blade pitch angle, deg.
Wall Window & Ceiling.qxd 4/03/2008 3:20 PM Page 16

SQ SERIES
2 Pole
1500 48 rev/sec

1000
A 80
77
600
73 76
pSF - Fan Static Pressure, Pa

400
80
69
70
200 0502
0562
65 0402
0312

100 m
ste
Sy nes
Li
65 71 77 79
50
0.2 0.4 0.6 1.0 2.0 4.0 6.0 10.0
qV - Volume Flow, m /s 3
dB(A) @ 3m: Inlet Side =

4 Pole
1500 24 rev/sec
1000 89

600
em 82
400 st
Sy nes 74 88
Li 76
pSF - Fan Static Pressure, Pa

72 80
200 67 74
74
64 70 1254
69 1004
100 57 64 0804
0634 0714
51 56 0564
60 0504
50
0404
40 0314
53 56 66 69 71 76 76 80 91
20
0.2 0.4 0.6 1.0 2.0 4.0 6.0 10.0 20.0 30.0 50.0

qV - Volume Flow, m3/s dB(A) @ 3m: Inlet Side =

6 Pole
600 16 rev/sec
80
400
es m

79
Lin yste
S

200 73
70
pSF - Fan Static Pressure, Pa

69
70
62
100 61 68
66 1256
61 1006
58 63
60 54 0806
50 0716
0636
47 0566
40 0506
43 0406
0316
42 47 54 63 61 68 70 71 82
20
0.2 0.4 0.6 1.0 2.0 4.0 6.0 10.0 20.0 30.0

qV - Volume Flow, m /s 3
dB(A) @ 3m: Inlet Side =
Wall Window & Ceiling.qxd 4/03/2008 3:21 PM Page 17

SQ SERIES
8 Pole
400 12 rev/sec

200
70
69
A
em
st
Sy ines 64
L
pSF - Fan Static Pressure, Pa

1258
62
100 57
1008
64 0808
60 55
0718 59
56
57
40 0638

57 61 57 62 71
20
0.5 1.0 2.0 4.0 6.0 10.0 20.0
qV - Volume Flow, m /s3
dB(A) @ 3m: Inlet Side =

DIMENSIONS
Model
Number
SQA/B.. A† B† CØ DØ EØ F1*
4 x EØ
0312/4/6 430 380 315 382 9 420 Holes
0402/4/6 540 490 400 467 9 420
A B
0502/4/6 655 615 500 587 11 460
0562/4/6 725 675 560 647 11 460
0634/6/8 805 750 630 717 11 460
0714/6/8 850 810 710 797 14 490
0804/6/8 970 910 800 887 14 490 GA GB
1004/6/8 1170 1110 1000 1088 14 See Motor
frame table
1254/6/8 1420 1360 1250 1338 14
Unit weights can be determined from pages C-112/113
* F1 is applicable to fans with motors up to D112M frame. See Motor frame table
F2 for sizes D132S and above.
CØ DØ

Air flow Air flow

Motor frame table Form A SQA.. Form B SQB..
Frame size F2† GA** GB**
D71 335 369 409 F F
D80 375 435 475
D90S 415 464 504
D90L 415 489 529
D100L 480 567 607
D112M 480 610 650
D132S 560 643 683
D132M 560 683 723
D160M 695 753 793
D160L 695 798 838
D180M 730 819 859
D180L 730 859 899
† F2 is applicable to Ø310 to Ø800 fans with motors D132S frame and above
and to all motor frame sizes for Ø1000 and Ø1200 fans.
** Dimensions GA & GB are approximate as they vary with the make of motor.