1.
Router Power Source & Supply
There are only two (2) sources of power for MPR‐A1 Router:
*Via Battery.
*Via External Power.
Note:
Usually, the battery can last for approximately 4hours of usage per full charge.
1.1 Charge battery
There are several ways to charge the battery of MPR‐A1 Router's battery:
*Via PC/Notebook USB port.
*Via Power adaptor(5V 1.2A).
*Via General mobile phone charger.
*Via car adaptor.
Steps to charge the battery as below:
step1 : Turn off the MPR‐A1 Router.
step 2: Connect Mini 5pin of the USB Charge Cable to MPR‐A1 Router's DC power Micro USB port.
step 3: Connect the other end of the USB Charge Cable to either PC/Notebook USB port, or to the
Power adaptor USB port, Mobile phone charger car adaptor.
Note:
1.While charging, the MPR‐A1 Router's Battery Light is in blue.
2.When full charged, the MPR‐A1 Router's Battery Light in no light.
3.We strongly recommended to charge the battery using DC adaptor, and it will take
approximately 3 hours to complete the charging.
1.2 Provide power source to Gadget：
The MPR‐A1 Router's USB port is also able to provide power source to charge
battery of a gadget.
Steps to charge battery as below(illustrated with iPhone):
step 1: Connect iPhone and MPR‐A1 Router's USB port by 30pin connector.
step 2: Turn the power switch of the MPR‐A1 Router to C. (This step is optional, suggest to
implement it to save battery capacity when you no need router function).
Note:
When MPR‐A1 Router's Power Switch turn to C, the MPR‐A1 Router will be Power‐off and
charging the smartphone is begun.
When the MPR‐A1 Router's Power Switch turn to on, the MPR‐A1 Router will be Power‐On
and the charging of smartphone will also be begun.
2. Package Contents
*1x MPR‐A1
*1x Micro USB Charging Cable
*1x Quick Installation Guide/ Warranty Card
Note:
1．The illustrations in this document may appear different from your model.
2．If any of above items is not packed in your package when open, please consult your
reseller immediately.
3．Using a power supply with a different voltage rating will cause damage and void the
warranty for this product.
3. Overview
4. Computer Setting
Establish Network Connection
Step 1:Open computer's wireless network connection, set the computer to “automatically
obtain IP address” and “automatically obtain DNS server address”. (Picture 1 & 2).
Step 2:Make sure your PC have WIFI function and WIFI status in “ON” condition. When WIFI
connected, click “Refresh network list”, select the router`s wireless network name in the
“Wireless Network Connection” page (wireless network name(SSID): HAME_A1_XXXX),make
sure WIFI connected and internet access. Then means you can use internet. Please see picture 3
& 4.
Note1: If your Computer or device doesn’t have the WIFI function. Please use
RJ45 cable to connect your WIFI device or PC with 3G Router through LAN port.
Note2: If can’t surf the internet successfully, then need go to step 3.
Step 3: Open the web browser and input IP address 192.168.169.1, Press Enter
(Picture 5).
Input password "hame", if you want change password#1.
#1: MPR‐A1 Router login credential is recommended to change to user preferable password,
if lost password, please press Router?s Reset button more than 5 seconds to load Factory
Default Settings. The password will be back to “hame”.
5. Hardware Installation,Please make sure the MPR‐A1 power switch in "R"
MPR‐A1 Router is designed with various methods of connections to the Internet(either way
hardware installation will be different), including:
1. Connect via 3G USB Modem
Before you begin, please make sure you have below items prepared:
1.MPR‐A1 Router.
2.3G USB Modem (compatible#2 with MPR‐A1 Router).
3.3G SIM Card (with data plan and valid login credential ready).
Hardware Installation Steps:
step 1. Insert the 3G SIM Card into 3G USB Modem.
step 2. Insert the 3G USB Modem to the MPR‐A1's USB port .
step 3. Turn on the power of MPR‐A1 Router.
step 4. Make the computer connect the WIFI SSID of MPR‐A1(see 4.Computer Setting).
step 5.Then you could surf.
If you could not surf ,Pls do following operations
step 1. Open a browser and enter http://192.168.169.1 at address bar.
step 2. Enter login credential with password as "hame".
step 3. Click Internet > WAN Network. Make sure that the 3G mode is
being selected in WAN Connection Type >Select Auto APN > Apply#3.
#2: For 3G USB Modem which is incompatible with the MPR‐A1, please contact us immediately.
#3: If you get the APN, Dial No., username, password from operator, you can also input it
manually.
2: Connect via iPhone
Before you begin, please make sure you have below items prepared:
1. MPR‐A1 Router.
2. iPhone#4(with 3G Internet connectivity ready).
3. iPhone 30Pin connector (for connection between iPhone and MPR‐A1 Router).
Hardware Installation Steps:
step 1: Connect iPhone and MPR‐A1 Router's USB port by 30pin connector.
step 2: Turn on iPhone Personal Hotsport from Settings > General >Personal Hotspot#4(please
select to turn on USB only when prompted in the iPhone).
step 3: Turn on the power of MPR‐A1 Router.
#4:Only applicable to iPhone 3G/3Gs or below, and firmware must below iOS5 (not including
iOS5). iPhone 4 and above is eligible in providing Hotspot solely.
3.Connect via ADSL Modem
Before you begin, please make sure you have below items prepared:
1.MPR‐A1 Router.
2.ADSL Modem with Telephone line connected at RJ11.
3.RJ45 Cable (use existing RJ45 cable from modem).
Installation Steps:
step 1. Connect the LAN port of ADSL Modem and WAN/LAN port of MPR‐A1 Router by RJ45
cable .
step 2. Turn on the power of both ADSL Modem and MPR‐A1 Router.
step 3. Make the computer connect the WIFI SSID of MPR‐A1(see 4.Computer Setting).
Step 4. Open a browser, login with password "hame", then input relevant ADSL login
credential#5 (ID and Password) in the pop up menu. Press OK.
step 5. Then you could surf.
If you could not surf ,Pls do following operations:
step 1. Open a browser and enter http://192.168.169.1 at address bar.
step 2. Enter login credential with password as "hame".
step 3. Click Internet > WAN Network. Make sure that the PPPOE(ADSL) is being selected in
WAN Connection Type.
step 4.Please make sure User Name and Password are correct.
#5:For unsuccessful login with the ADSL credential, kindly contact the ADSL ISP
(Internet Service Provider) Immediately.
4. Connect via Cable/DHCP Modem
Before you begin, please make sure you have below items prepared:
1. MPR‐A1 Router.
2. Switch or Router with Internet access ready(eg:existing office LAN, hotel LAN, etc which has
Internet facility ready).
3. RJ45 Cable (use existing RJ45 cable from modem).
Hardware Installation Steps:
step 1. Connect the LAN port of Switch or Router and WAN/LAN port of MPR‐A1 Router by RJ45
cable .
step 2. Turn on the power of MPR‐A1 Router.
step 3. Make the computer connect the WIFI SSID of MPR‐A1(see 4.Computer Setting).
step 4. Then you could surf.
If you could not surf ,Pls do following operations:
step 1. Open a browser and enter http://192.168.169.1 at address bar.
step 2. Enter login credential with password as "hame".
step 3. Click Internet > WAN Network. Make sure that the DHCP is being selected in WAN
Connection Type .
5.Connect via WIFI Hotspot
Before you begin, please make sure you have below items prepared:
1.MPR‐A1 Router.
2.WIFI account.
Installation Steps:
step 1. Turn on the power of MPR‐A1 Router.
step 2. Make the computer connect the WIFI SSID of MPR‐A1(see 4.Computer Setting).
step 3. Open a browser and enter http://192.168.169.1 at address bar.
step 4. Enter login credential with password as "hame".
step 5. Click Internet>WAN Network. Make sure that the WIFI mode is being selected in WAN
Connection Type. Click at Get APlist from air, then select the SSID that the ISP provides
and type the Password, press Apply.
6. Configure the Router(Web‐GUI)
6.1 Connections Status:
Display the current network's connection status, including Signal
Performance, Network Mode, etc .Click at Home to find out more details.
6.2 WIFI Management :
To configure the WiFi of the Router, including to turn On or Off the WiFi, assign SSID, assign
WiFi password, etc. Below are a few major WiFi configuration that mostly concerns:
a) Setting WiFi SSID
Click the Wireless > WiFi Settings, enter desire WiFi SSID at NetworkName(SSID) then click
Apply.
b) Forget WiFi password or SSID
Load Factory Default settings by clicking Admin > Settings > Load Default Button. Alternatively,
user may press the Reset button from the button of the device for more than 5seconds, a
reboot will be happening. It will no need password for WiFi access.
c) Setting Security Method
WiFi default security method is Disable. Please make sure that the router's encryption
method is same as the device or PC Encryption method if want to configure the security
method, click Wireless >Security > Security mode. Select security, same as the PC or WiFi
Device. Please make the number of the passwords in 8‐64bits.
6.3 Manual APN:
Firstly setting "3G" mode: Internet >WAN Network >WAN Connection Type>3G,then select
"Manual APN" >fill in APN information accordingly and press "Apply".
7．Compatibility Test List (USB Modem)
Customer
ID Brand Model checked Remarks 3G System
support
1 Aircard 932 HSPA
2 Aircard 951 HSPA
3 Aircard V 721 HSPA
4 Aircard 2417C-U302 HSPA
5 Aircard 800h Yes TD-SCDMA
6 Aircard Aircard901 TD-SCDMA
7 Aircard DTM5731 TD-SCDMA
One Touch
Alcatel Yes HSPA
8 X060S
One Touch
Alcatel Yes HSPA
9 X200
10 Anydata ADU-520c Yes EV-DO
11 Anydata ADU-520L Yes EV-DO
12 Anydata ADU-555C Yes EV-DO
13 ASB W720 HSPA
14 AT&T AC885 HSPA
15 AT&T N7NC885 HSPA
SIERRA
AT&T HSPA
16 WIRELESS
17 Axesstel MV-140A Yes HSPA
18 Axesstel MV-140B No USIM version EV-DO
19 b.mobile locked HSPA
20 Bandluxe c120 HSPA
21 Bandluxe c170 HSPA
22 Bandluxe c180 HSPA
23 Bandluxe c270 HSPA
24 Bandluxe c321 HSPA
25 Brandluxe C100S HSDPA
26 Coolpad CT180 EV-DO
27 Cricket UM 185C Yes EV-DO
28 D-Link DWM156 HSPA
29 D-Link DWM-162-U5 EV-DO
30 D-Link DWM-652 Yes HSPA
31 D-Link DWM-162-U5 EV-DO
32 Epivalley SEC-8089 Yes EV-DO
33 Franklin CDU-680 No USIM version EV-DO
34 GI0322 HW V42 HSPA
35 Gold Space E800 EV-DO
36 HAME 521K EV-DO
37 HAME 521M new version EV-DO
38 HAME 521M old version EV-DO
39 HAME 521Q EV-DO
40 HAME 526D EV-DO
41 HAME 619U+ EDGE
42 HAME 620A HSDPA
43 HAME 620C HSDPA
44 HAME 621A HSDPA
45 HAME 621B HSDPA
46 HAME 621G HSPA
47 HAME 621H HSDPA
48 HAME 622A HSDPA
49 HAME 622C HSDPA
50 HAME 622G HSPA
51 HAME 625A HSDPA
52 HAME 628U HSDPA
53 HAME 630A HSPA
54 HAME 631G HSPA
55 HAME 631N HSPA
56 HAME 631Q HSPA
57 HAME 632G HSPA
58 HAME 638U HSPA
59 HAME T336 HSPA
60 HAME 511D EV-DO
Qualcomm
HAME 521D EV-DO
61 chipset
62 HAME 521D VIA chipset EV-DO
ST
HOJY WIRELESS TD-SCDMA
63 ERICSSON
64 Huawei E156 EV-DO
Needs
Huawei E1692 EV-DO
65 customer testing
66 Huawei EC122 EV-DO
67 Huawei EC1260 EV-DO
68 Huawei EC1261 EV-DO
69 Huawei EC1270 EV-DO
70 Huawei EC167 EV-DO
Huawei EC176 EV-DO
Huawei EC177 EV-DO
71 Huawei EC169 EV-DO
72 Huawei EC226 EV-DO
73 Huawei EC306 EV-DO
74 Huawei EC306-2 EV-DO
75 Huawei 2910 HSPA
76 Huawei E122 HSPA
77 Huawei E153 HSPA
78 Huawei E1552 HSDPA
79 Huawei E156G HSDPA
Data card locked,
Huawei E160 need customer HSDPA
80 confirm
81 Huawei E1612 HSPA
82 Huawei E1630 HSDPA
83 Huawei E166 HSDPA
84 Huawei E169 HSDPA
85 Huawei E170 HSPA
Data card locked,
Huawei E172 need customer HSPA
86 confirm
87 Huawei E173 HSPA
88 Huawei E1750 HSPA
89 Huawei E1752 HSPA
90 Huawei E1752C HSPA
Data card locked,
Huawei E1756C need customer HSPA
91 confirm
92 Huawei E176 HSPA
93 Huawei E1762 HSPA
94 Huawei E176G HSPA
95 Huawei E1780 HSPA
96 Huawei E1782 HSPA
97 Huawei E180 HSPA
98 Huawei E1820 HSPA+
99 Huawei E182E HSPA+
100 Huawei E220 HSDPA
101 Huawei E226 HSDPA
102 Huawei E261 HSDPA
103 Huawei E270 HSDPA
104 Huawei E353 HSPA+
105 Huawei E510 Yes HSPA
106 Huawei E73 HSPA
107 Huawei EC121 EV-DO
108 Huawei EC189 EV-DO
109 Huawei EG162G EDGE
110 Huawei ET127 TD-SCDMA
111 Huawei ET128 TD-SCDMA
112 Huawei ET128-2 TD-SCDMA
Data card locked,
Huawei MD_@ need customer HSPA
113 confirm
114 Huawei UMG1691 HSDPA
115 Huawei UMG1831 HSDPA
116 HXI EV-DO
117 IFOX 820 HSPA
118 Jadpad TJP-W100 HSPA
119 Lenovo W100 EV-DO
120 Lenovo CE210 EV-DO
121 Linktop lw273 HSDPA
122 Longcheer WM71 Yes HSPA
123 Micromax MMX 300G HSPA
124 NEXT USB301 HSDPA
125 Novatel MC930D HSPA
126 Novatel MC950D HSPA
127 Novatel MC990D HSPA
128 Novatel MC996D HSPA
129 Option 225 HSPA
130 OPTION GI0401 HSPA
131 Option GI0431 HSPA
132 Option GI0451 HSPA
133 Option icon 210 HSPA
134 Option U12 HSPA
135 Orange GI0225 HSPA
136 Pantech PX-500 No USIM version EV-DO
137 PROLINK PSH101 HSPA
Data card locked,
ROGERS MD400 need customer HSPA
138 confirm
139 SAMSUNG HSPA
140 sanmu HSPA
141 sentar modem ILD72A HSDPA
142 SIERRA WIRELESS USB 301 EV-DO
143 SMART BRO HSPA
Data card locked,
Sony Ericsson MD300 need customer HSPA
144 confirm
sprint Mobile
U720 EV-DO
145 Broadband
146 telenor HSPA
147 TimesPower WM2080A-110 EV-DO
148 Tj 1602 EV-DO
149 Tj 1603 EV-DO
150 TXT EV-88 EV-DO
151 TXT W-11 HSPA
152 TXT W-11 HSDPA
153 TXT W-12 HSDPA
154 Vodafone K3760 HSPA
155 Vodafone E272 HSPA
156 Vodafone K3520 HSDPA
157 Vodafone K3565 HSDPA
158 Vodafone K3565 (Rev2) HDSPA
159 Vodafone K3565-Z HSPA
Data card locked,
Vodafone K3570-Z need customer HSDPA
160 confirm
Data card locked,
Vodafone K3571-Z need customer HSDPA
161 confirm
162 Vodafone K3715 HSPA
163 Vodafone K3760 HSPA
164 Vodafone K3765 HSPA
165 Vodafone K3765-Z HSPA
166 Vodafone CE1588 HSDPA
167 Wei wen black EV-DO
168 Wei wen black no need driver EV-DO
169 ZTE AC2726 EV-DO
170 ZTE AC2728 EV-DO
171 ZTE AC2736 EV-DO
172 ZTE AC2746 EV-DO
173 ZTE AC2766 EV-DO
Data card locked,
ZTE AC305 need customer EV-DO
174 confirm
175 ZTE AC560 EV-DO
enganced
ZTE AC560 EV-DO
176 version
177 ZTE AC580 EV-DO
178 ZTE AC581 EV-DO
179 ZTE AC582 EV-DO
180 ZTE AC583 EV-DO
181 ZTE AC590 EV-DO
182 ZTE AC591 EV-DO
183 ZTE AC682 EV-DO
184 ZTE AC8710 EV-DO
185 ZTE M801 HSPA
186 ZTE MF100 HSPA
other customer 's
ZTE MF100 customization HSPA
187 modem
188 ZTE MF110 HSPA
other customer's
ZTE MF110 customization HSPA
189 modem
Data card locked,
ZTE MF112 need customer HSUPA
190 confirm
191 ZTE MF180 HSDPA
192 ZTE MF190 HSDPA
193 ZTE MF190B HSUPA
194 ZTE MF190J HSUPA
195 ZTE MF192 HSDPA
196 ZTE MF193 HSDPA
197 ZTE MF196 HSDPA
198 ZTE MF622 HSPA
199 ZTE MF626 HSDPA
200 ZTE MF627 HSDPA
201 ZTE MF628 HSPA
202 ZTE MF631 HSDPA
203 ZTE MF633 HSDPA
204 ZTE MF633BP+ HSDPA
205 ZTE MF633R HSDPA
Data card locked,
ZTE MF636 need customer HSDPA
206 confirm
207 ZTE MF637U HSPA
208 ZTE MF656A HSPA
209 ZTE MF668 HSPA
210 ZTE MF668A HSPA
211 ZTE MF669 HSPA+
212 ZTE MF680 HSPA
213 ZTE MF820D HSPA
214 ZTE MU 350 TD-SCDMA
215 ZTE MU 351 TD-SCDMA
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution.
Specific Absorption Rate (SAR) information:
This Wireless Router meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all
persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. Device types: A1(FCC ID: R7FA1 has also
been tested against this SAR limit. The highest SAR value reported under this standard
during product certification for use at the body is 0.743W/kg. This device was tested for
typical body-worn operations with the back of the handset kept 0.5cm from the body.
To maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 0.5cm separation distance between the user's body and the back of the
handset. The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
