MAXEON 6 AC SOLAR PANEL
410-425 W | Up to 22.0% Efficient
Factory-integrated Black backsheet,
AC microinverter black frame
More Lifetime Energy
Designed to maximise energy generation through leading efficiency, enhanced
performance in high temperatures, and higher energy conversion in low-light
conditions like mornings, evenings and cloudy days.
Uncompromising Reliability
Engineered to power through all types of weather conditions with crack-
resistant cells and reinforced connections that protect against fatigue
and corrosion. Each panel’s microinverter enables independent panel
operation to mitigate the impact of shade while improving system
performance.
Superior Sustainability
Clean ingredients, responsible manufacturing, and lasting energy production for
40 years make SunPower Maxeon panels the most sustainable choice in solar.
The Industry’s Longest Warranty
SunPower Maxeon panels are covered by a 40-year warranty1
backed by extensive third-party testing and field data from more
than 33 million panels deployed worldwide.
Product and power coverage 40 Years
Year 1 minimum warranted output 98.0%
Maximum annual degradation 0.25%
Microinverter limited product warranty 25 Years
covered by Enphase
Learn more about the SPR-MAX6-XXX-BLK-E3-AC
sunpower.maxeon.com
MAXEON 6 AC POWER: 410-425 W | EFFICIENCY: Up to 22.0%
AC Electrical Data Tested Operating Conditions
Inverter Model: IQ 7A @230 VAC Operating Temp. −40°C to +60°C
366 VA Max. Ambient Temp. 50°C
Peak Output Power
Relative Humidity 4% to 100% (Condensing)
Max. Continuous Output Power 349 VA
Max. Altitude 2000 m
Nom. (L–N) Voltage/Range 219 – 264 V Design Load4 Wind: 3600 Pa, 367 kg/m² back
Max. Continuous Output Current 1.52 A Snow: 5400 Pa, 551 kg/m² front
Max. Units per 20 A (L–N) Branch Circuit 10 Impact Resistance 25 mm diameter hail at 23 m/s
Weighted Efficiency2 96.5% Microinverter Class II double-insulated, corrosion
enclosure resistant polymeric enclosure
Nom. Frequency 50 Hz
Extended Frequency Range 45-55 Hz Warranties, Certifications
AC Short Circuit Fault Current Over 3 Cycles 5.8 A rms and Compliance
Overvoltage Class AC Port III Panel Warranties1 • 40-year limited power warranty
AC Port Backfeed Current 18 mA • 40-year limited product warranty
Power Factor Setting 1.0 Microinverter • 25-year limited product warranty
Power Factor (adjustable) 0.8 lead. / 0.8 lag. Warranty covered by Enphase warranty5
• IEC 61215, 617306
DC Power Data • IEC 62109-1, 62109-2
SPR-MAX6-425- SPR-MAX6-415- SPR-MAX6-410- Certifications and • IEC 61000-6-3
BLK-E3-AC BLK-E3-AC BLK-E3-AC Compliance • AS4777.2, RCM
Nom. Power3 (Pnom) 425 W 415 W 410 W • IEC/ EN 50549-1:2019, G98/G99
Power Tol. +5/0% +5/0% +5/0% • VDE-AR-N-4105
Module Efficiency 22.0% 21.5% 21.2% Quality Management
Temp. Coef. (Power) −0.29%/°C ISO 9001:2015, ISO 14001:2015
Certs
Shade Tol. Integrated module-level max. power point tracking PID Test 1000 V: IEC 62804
LeTID Test Draft version IEC 612157
Mechanical Data Available listing TUV6, EnTest
Solar Cells 66 Maxeon 6 Cells Green Building Panels can contribute additional points
Tempered Glass High-transmission tempered anti-reflective Certification towards LEED and BREEAM
Environmental Rating Microinverter Outdoor rated - IP67 (UL: NEMA type 6) contribution certifications
Frame Class 1 black anodized RoHS, OHSAS 18001:2007, REACH
EHS Compliance
SVHC-201
Weight 21.8 kg
1032 mm
FRAME PROFILE
40 mm
A
1872 mm
(A) Long Side: 32 mm
Short Side: 24 mm
1 40-year warranty is not available in all countries or all installations and requires
registration, otherwise our 25-year warranty applies. Service availability varies by
country and installation provider.
2 Tested per EN 50530 (EU). Please read the safety and installation instructions.
3 Standard Test Conditions (1000 W/m² irradiance, AM 1.5, 25°C). NREL calibration Visit www.sunpower.maxeon.com/int/InstallGuideACModules
Paper version can be requested through
standard: SOMS current, LACCS FF and voltage. All DC voltage is fully contained within techsupport.ROW@maxeon.com
the module.
4 Safety factor 1.5 included.
5 AC modules shall be connected to Enphase Monitoring hardware (ENVOY) to enable
Enphase product warranty.
6 Refer to the DC module, Class C fire rating per IEC 61730.
7 Panels degraded 0% in extended LeTID testing conducted by PVEL. Test report
R10124977G-1,2020.
Made in Malaysia (Cells)
Assembled in Malaysia (Module)
Specifications included in this datasheet are subject to change without notice.
©2022 Maxeon Solar Technologies. All Rights Reserved. 544444 REV A / A4_EN
View warranty, patent and trademark information at maxeon.com/legal. Publication Date: March 2022