GARDNER DENVER 3-1-541 Rev D

April, 2005

HD-2250

WELL SERVICE PUMP

POWER END
PARTS LIST

ECN 1025185
 MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH
GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES

Gardner Denver genuine pump parts, 1. Trained parts specialists to assist you in
manufactured to design tolerances, are selecting the correct replacement parts.
developed for optimum dependability. Design 2. Repair and maintenance kits designed with
and material innovations are the result of years of the necessary parts to simplify servicing your
experience with hundreds of different pump pump.
applications. Reliability in materials and quality
assurance are incorporated in our genuine
replacement parts. Authorized service technicians are factory trained
Gardner Denver supports your needs with these and skilled in pump maintenance and repair.
services: They are ready to respond and assist you by
providing fast, expert maintenance and repair
services.

For the location of your local authorized Gardner Denver distributor refer to the yellow
pages of your directory or contact:

Factory (Tulsa): Service Center Service Center (Ft.

(Odessa): Worth):
Gardner Denver Well Servicing Pumps Chaparral Geoquip
4747 South 83rd East Avenue 2121 West 44th Street 7533 Kathy Lane
Tulsa, Oklahoma 74145 Odessa, Tx 79768 Ft. Worth, Texas 76126

Phone: (918) 664-1151 Phone: (432) 366-5433 Phone: (817) 249-6400

(800) 738-8099 (800) 368-1134 (800) 824-0271

Fax: (918) 664-6225 Fax: (432) 363-9940 Fax: (817) 249-6401

INSTRUCTION FOR ORDERING REPAIR PARTS

When ordering parts, specify Pump MODEL and SPECIFY THE NUMBER OF PARTS
SERIAL NUMBER (see nameplate on unit). The REQUIRED.
Serial Number is also stamped on top of the
cylinder end of the frame (cradle area). DO NOT ORDER BY SETS OR GROUPS.
All orders for Parts should be placed with the
To determine the Right Hand and Left Hand
Tulsa Facility. side of a pump, stand at the power end and
Where NOT specified, quantity for parts required look toward the fluid end. Right Hand and
per pump unit is one (1); where more than one is Left Hand are indicated in parenthesis
required per unit, quantity is indicated in following the part name, i.e. (RH) & (LH), when
appropriate.
parenthesis.

3-1-541 Page 1
 TABLE OF CONTENTS

Maintain Pump Reliability and Performance with genuine Gardner

Denver Parts and Support Services..............................................................................................1

Instructions for Ordering Repair Parts...........................................................................................1

Power End Assembly Illustration...........................................................................................3, 4, 5

Power End Assembly Parts List ....................................................................................................6

Crankshaft Assembly ....................................................................................................................7

Connecting Rod Assembly............................................................................................................8

Lubrication Piping Group.........................................................................................................9, 10

Gardner Denver Unit Record .............................................................................Inside Back Cover

3-1-541 Page 2
 Order by Part Number and Description.
Reference Numbers are shown for your convenience only.

POWER END ASSEMBLY

300THD810
(Ref. Drawing)

3-1-541 Page 3
Order by Part Number and Description. Reference Numbers are shown for your convenience
only.

POWER END ASSEMBLY

300THD810
(Ref. Drawing)

3-1-541 Page 4
 Order by Part Number and Description.
Reference Numbers are shown for your convenience only.

POWER END ASSEMBLY

300THD810
(Ref. Drawing)

3-1-541 Page 5
 Order by Part Number and Description.
Reference Numbers are shown for your convenience only.

POWER END ASSEMBLY

Ref. Ref.
No. Name of Part Qty. Part No. No. Name of Part Qty. Part No.

1 Power Frame Housing 1 050200 22 Stay Rod (Std 13 ) 12 300THD409

2 Ring Snap Outer 8 053205 Stay Rod (Hvy Duty 13 ) 12 PP1000477
3 Set Screw-Bull Gear Key 2 26029 23 Hex Nut, Heavy 12 50AW55
4 Gasket, Pony Rod 24 Cover, Crosshead 1 075233
Seal Retainer 3 065217 25 Inspection Covers 1 075234
5 Pony rod Seal Retainer 3 066218 26 Cover, Back Frame 3 300THD225
6 Wiper Pony Rod 27 Gasket, Crosshead
(Seal) Garlock 3 201OPB199 Cover 1 065237
7 Capscrew 18 655EF060 28 Gasket, Inspection Cover 3 065238
8 Bronze Thrust Ring 2 068220 29 Gasket, Back Frame
9 Capscrew, Brass Slotted Cover 3 065239
Flush 16 029234 30 Pipe Plug 1 64AC5
10 Set, Bull gear 6.353:1 1 302THD280 31 Gasket, Gear Housing
11 Capscrew 8 029235 Cover 2 351662
12 Lockwasher 8 070222 32 Bolt, Hex Hd 206 75K48
13 Bull Gear Key 2 100033 33 Eyebolt 2 076243
14 Shim Pack, Bull Gear 34 Nozzle 2 082244
(.030) Shim 1 072224 35 Pipe Plug 2 415649000
(.020) Shim 1 072225 36 Retaining Ring Lock 8 3000-75
(.015) Shim 1 072226 37 Plug, 4 Drain 1 078247
(.010) Shim 1 102537 38 Capscrew 8 351742
(.005) Shim 1 072228 39 Rotary Union Seal Carrier 2 342-A-75
15 Pinion Key 1 103125 40 Gasket, Seal Carrier,
16 Pinion Shaft, Splined Rotary Union 2 565PN031
(6.353:1) 1 300THD181 41 Seal, Rotary Union Oil 2 901SH02-13
Pinion Shaft, Keyed 43 Cover, Gear Inspection 2 075256
(6.353:1) 1 301THD181 44 Gasket, Gear Inspection
17 Bearing, Pinion 2 925SH01-13 Cover 2 065257
18 Pinion Bearing Housing 2 054228 45 Retainer, Pinion Shaft
19 Capscrew 6 029236 Retainer 1 300THD1148
20 Capscrew 6 029237 46 Gasket, Pinion Seal
21 Shimpack, Pinion Retainer 1 065259
(.005) Shim 1 072231 47 Seal, Pinion 1 60G60
(.010) Shim 1 100681 48 Cap, Breather ¾ NPI 1 081261
(.015) Shim 1 072232 49 Cover, Breather Cap 2 075262
(.030) Shim 1 072233

3-1-541 Page 6
 Order by Part Number and Description.
Reference Numbers are shown for your convenience only.

CRANKSHAFT ASSEMBLY

Ref.
No. Name of Part Qty. Part .

1 Crankshaft 1 473PN15

2 Bearing, Main Roller 4 925SH01-12

3 D/Connecting Rod Bearing Housing 3 300THD006

4 Bearing, Connecting Rod 6 925PN002

5 Capscrew, D/Socket Hd 12 029230

6 Screw 1 300THD655

7 Stud 18 025230

8 Nut, Flex Loc, Full Ht Heavy Duty 18 026230

9 Retainer Ring (Inner) 8 926SH01-1

304THD810-A
(Ref. Drawing)

3-1-541 Page 7
 Order by Part Number and Description.
Reference Numbers are shown for your convenience only.

301THD810
(Ref. Drawing)

CONNECTING ROD ASSEMBLY

Ref.
No. Name of Part Qty. Part .

1 Connecting Rod 3 055208

2 Capscrew 12 2009617
3 Wrist Pin 3 058211
4 Crosshead 3 059213
5 Bearing, Thrust 3 057210
6 Retainer, Crosshead Bearing 3 086103
7 Capscrew 18 75LM126
8 Pony Rod (with OPI Clamp End) 3 063216
9 Bushing, Crosshead 6 056209
10 External Snap Ring 6 053207
11 Bolt, Ferry 12 580117

3-1-541 Page 8
Order by Part Number and Description. Reference Numbers are shown for your convenience only.

LUBRICATION PIPING GROUP

302THD810
(Ref. Drawing)

3-1-541 Page 9
 Order by Part Number and Description.
Reference Numbers are shown for your convenience only.

LUBRICATION PIPING GROUP

Ref.
No. Name of Part Qty. Part .

1 Rotary Union 2 922PN01

2 Crankshaft Rotary Union Adapter 2 342-A-74

3 Capscrew 8 454VP034-006

4 O-Ring Rotary Union Seal 2 901SH05-223

5 Pipe Fitting, Nipple 2 63H11

6 Pipe Fitting, Coupling 4 64BK2

7 Pipe Fitting Reducing Tee (1 to ½ ) 2 082268

8 Pipe Bushing 15 082287

9 Pipe Fitting, Nipple 4 082271

10 Pipe Fitting, Adapter 4 29Z229

11 Pipe Fitting, Adapter 5 5018198

12 Hose Adapter, Male Connection 2 082274

13 Hose Adapter, Male Manifold Connection 9 082275

14 Pipe Plug 2 64AA5

15 Hose, PTFE and Stainless Steel (Crosshead) 3 082277

16 Hose, PTFE and Stainless Steel (Main Bearing) 4 082279

17 Hose, PTFE and Stainless Steel (Gear Nozzle) 2 082280

18 Hose, PTFE and Stainless Steel (Crankshaft) 2 082281

19 Pipe Plug 2 078248

3-1-541 Page 10
 GARDNER DENVER UNIT RECORD

The following unit identification plate is provided as a convenience to you, our

valued Gardner Denver customer. Please take the time to copy all the
information from the actual nameplate of your unit. The model number, date
manufactured and serial number will be required when contacting the
company or your distributor for information or replacement parts.

200OPA496
(Ref. Drawing)
For additional information contact your local representative or
Gardner Denver Inc.
4747 South 83rd East Avenue, Tulsa, OK 74145
PH: (918) 664-1151, (800) 637-8099
FAX: (918) 664-6225
www.gardnerdenver.com

Specifications subject to change without notice.

Copyright © 2001 Gardner Denver, Inc. Litho in U.S.A.