Scribd
Upload
9 views1 page

Quick Coupling Datasheet

This document provides information on quick couplings and flexible hoses used in a piping system. It lists 4 quick couplings with tag numbers, their connections to P&IDs, locations, service types, quantities, and environmental conditions. It also specifies the construction details of the quick couplings such as size, type, materials, end connections, markings, certifications, and installation notes. The quick couplings are made of SS 316L and have cam and groove or dry break couplings with 150# flanged connections.

Uploaded by

faridferdiansyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views1 page

Quick Coupling Datasheet

This document provides information on quick couplings and flexible hoses used in a piping system. It lists 4 quick couplings with tag numbers, their connections to P&IDs, locations, service types, quantities, and environmental conditions. It also specifies the construction details of the quick couplings such as size, type, materials, end connections, markings, certifications, and installation notes. The quick couplings are made of SS 316L and have cam and groove or dry break couplings with 150# flanged connections.

Uploaded by

faridferdiansyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DOCUMENT NO:

Data Sheet
REV
Piping Specialty Item JTB-SF-L-DTS-900-00002 0

Quick Coupling and Flexible Hose SHEET 15 OF 25

1 GENERAL INFORMATION
2 Sequence No. 56 57 58 59
3 Quick Coupling Tag No. 211-SP-QC-9001 211-SP-QC-9011 211-SP-QC-9012 211-SP-QC-9013
4 Flexible Hose Tag No. - - - -
5 P&ID No. JTB-SF-P-PID-211-00004 JTB-SF-P-PID-211-00005 JTB-SF-P-PID-211-00008 JTB-SF-P-PID-211-00009
6 Service Oily Water Waste / Sewage Water Fuel Diesel Water
Drip Pan of Pig launcher
7 Line No. / Equipment No. 211-WW-5001-2"-01A1 211-FD-8001-2"-01A1 211-WT-1001-2"-01A0G
(211-D-9001)
8 Area 211 211 211 211
9 Quantity (Ea) 1 1 1 1
10 ENVIRONMENTAL CONDITION
11 Location Onshore
12 Ambient (oF Max.) 91.4
13 Temperature o
( F Min.) 71.06
14 (% Max.) 100
Relative Humidity
15 (% Min.) 75.93
16 DESIGN CONDITION
17 Operating Temperature ( oF) TFD 100 86 77
18 Design Temperature (oF) TFD 330 170 170
19 Operating Pressure (Psig) TFD 5 0 0
20 Design Pressure (Psig) TFD 50 1.01 FW
21 CONSTRUCTION (See Sketch C)
22 Size Nominal (NB) 2" 2" 2" 2"
Dry Disconnect Type fitted with
23 Type of Quick Coupling Dry Break Cam and Groove Cam and Groove Cam and Groove
check valve
24 Quantity (A. Flange Adapter) 1 1 1 1
25 Quantity (B. Coupling) 1 1 1 1
26 Quantity (C. Nozzle) - - - -
27 Quantity (D. Hose) - - - -
28 Quantity (E. Clamp) - - - -
29 Hose Length (m) - - - -
30
31 End Connection A. Female Coupler x 150# Flanged RF to ASME B16.5 with Dust Cap & Safety Chain
32
33 Min. Hose Bending Radius (mm) - - - -
34 MATERIAL
35 Body (A, B) SS 316L SS 316L SS 316L SS 316L
36 Seal - - - -
37 Clamp (E) - - - -
38 Hose (D) - - - -
39 TECHNICAL DELIVERY REQUIREMENT
40 Marking JTB-SF-L-SPE-900-00008
41 Certification BS EN 10204 Type 3.1
42 INSTALLATION TYPE
43
44
45
46
47
48
49
50
51 NOTE :
52 1. Items Shall Be Supplied with Permanently Attached SS 316 Tag, Metal Stamped with PO No. and Tag No.
53 2. VTA : Vendor to Advise
54 3. TBA : To Be Advise
55 3. Hose Shall be Non-Collapsible, Non-Kinkable Type and Shall be of Single Length Without Joints
56 5. To be Finalized During Detailed Engineering
57 6. Complete Hose Assembly Shall be Hydro Test at 1.5 Times the Design Pressure

You might also like