Marmoset Toolbag 4

END USER LICENSE AGREEMENT

Copyright (C), Marmoset LLC
Last Revised: June 7th, 2021

1. ACCEPTANCE OF TERMS
By downloading, installing, and using Marmoset Toolbag (the "Software") you are
held to the terms and restrictions of this license.

2. COPYRIGHT NOTICE
Marmoset LLC retains all right, title and interest in the Software and its
associated documentation and library assets including all intellectual property
rights embodied therein and derivatives thereof. All rights, title, and interest
are protected by the copyright laws that pertain to computer software. The
Software, or any derivatives thereof, may not be resold, rented, leased,
distributed (electronically or otherwise), or offered on any other for-charge basis
for any purpose.

All works created by the licensee with the use of the Software, including any
third-party marks, trademarks, or copyrights associated with the works created,
will be owned by the licensee, and no assumption of ownership is made by Marmoset
LLC, or Marmoset LLC's owners, employees, agents or assignees.

3. GRANT OF LICENSE
By installing this software Marmoset grants the licensee a limited, non-exclusive,
non-transferable license to install and use the Software and accompanying example
content, documentation, and Toolbag Library assets for both commercial and non-
commercial purposes in accordance with the Software Use Limitations section below.

Licensee may install the Software on more than one computer but concurrent use of
different installations of the Software shall not exceed the number of license
seats the End User has paid for and has been authorized to use.

4. SOFTWARE USE LIMITATIONS

For each license granted the person(s) permitted to use each license are restricted
to be in accordance with the license type purchased.

4.1 "Individual" licenses are personal licenses and licensed strictly for use by
the person making the purchase. Any visual and creative works created with the
Software under an Individual license is authorized for commercial and non-
commercial use.

4.2 "Academic" licenses are licensed to the academic institution making the
purchase. License use is granted to any staff member, faculty, student, and legal
agent of the academic institution who owns the license, whether located on-site or
remote. In the event the license was purchased through a reseller on behalf of a
client the client academic institution is the licensee. Any visual and creative
works created with the Software under an Academic License are for academic purposes
only and may not be resold, rented, leased, or offered on any other for-charge
basis.

4.3 "Studio" licenses are licensed to the company making the purchase and any
wholly owned subsidiaries and license use is granted to any company owner, legal
agent, and legal employee of the company and its wholly owned subsidiaries, whether
located on-site or remote. In the event the license was purchased through a
reseller on behalf of a client the client company is the licensee. Any visual and
creative works created with the Software under a Studio License are authorized for
commercial use.
4.4 "Trial" licenses are granted for personal evaluation purposes only. Each
individual is entitled to one 30-day free trial license. Any visual and creative
works created with the Software under a Trial License are for evaluation only and
may not be resold, rented, leased, or offered on any other for-charge basis.

5. TERM OF LICENSE

5.1 Perpetual licenses grant the licensee indefinite access to the Software and the
Toolbag Library so as long as the licensee is in accordance with the terms of the
license. Software updates and updates to the Toolbag Library will be provided to
the licensee without additional charge but availability of those updates will be
limited to point release updates for the whole number version of the Software for
which the license was purchased.

5.2 Subscription licenses grant the licensee access to the Software and the Toolbag
Library and include all associated updates for the duration of the licensee's
active term of subscription and as long the licensee is in accordance with the
terms of their license.

6. SUBSCRIPTION RENEWAL
The term of a Subscription license will auto-renew in either 1-month or 12-month
terms determined by the license term purchased and beginning from the date of
original license purchase. Licensee may voluntarily cancel a subscription renewal
and opt out of auto-renewal for any active subscription through their Marmoset
Account (https://account.marmoset.co). If auto-renewal is disabled a subscription
license will remain active until the currently active term expires.

7. CANCELLATIONS AND REFUNDS

7.1 Perpetual Licenses may be cancelled and a full refund provided within 14 days
of a completed payment. Upon a cancellation granted by Marmoset the license
purchased will be cancelled and the licensee will be unable to access the Software
with that license from the date of cancellation.

7.2 Annual Term Subscription licenses may be cancelled and a refund provided within
14 days of the most recently completed term payment. Only the most recent term
payment completed may be refunded. Upon a cancellation granted by Marmoset the
license will be cancelled and the licensee will be unable to access the Software
with that license from the date of cancellation.

7.3 Monthly Term Subscription licenses may be cancelled and a refund provided
within 7 days of the most recently completed term payment. Only the most recent
term payment completed may be refunded. Upon a cancellation granted by Marmoset the
license will be cancelled and the licensee will be unable to access the Software
with that license from the date of cancellation.

7.4 Requests for refunds must be submitted to Marmoset's support team at

support@marmoset.co

8. DISCLAIMER OF WARRANTY ON SOFTWARE

The Software, related documentation, and support media is provided "as is”.
Marmoset LLC explicitly disclaims all warranties, including but not limited to the
implied warranties of merchantability and fitness for a specific purpose.

9. LIMITATION OF LIABILITY
The entire risk arising out of the use or performance of the Software remains with
the End User. Under no circumstances shall Marmoset LLC, or its respective owners,
employees, agents or assignees be liable for any incidental, special or
consequential damages that may result from the use or inability to use the Software
or related documentation.
10. SUPPORT
If any questions or comments arise regarding the use of the Software the End User
is entitled to free email support. Please contact us at support@marmoset.co.

11. ADDITIONAL CREDITS

A special thanks to the following for support and contributions to Toolbag. Any
digital assets provided by the following and included with Toolbag remain property
of their respective owners - unless mutual agreement outside of these terms is in
place - and no assumption of ownership is made by Marmoset LLC.

Example Scenes:
"Foxy Lady" Scene - Viviane Herzog (www.artstation.com/artist/hev) & Thomas
Pradeilles (http://doodahprod.com/)

Software:
Portions Copyright (c) Intel.
Portions Copyright (c) NVIDIA.
Portions Copyright (c) Syoyo Fujita.
Portions Copyright (c) Morten S. Mikkelsen.
Portions Copyright (c) 1988-1997 Sam Leffler.
Portions Copyright (C) 2011-2016 by Stefan Gustavson.
Portions Copyright (c) 1991-1997 Silicon Graphics, Inc.
Portions Copyright (c) 1998, 2002-2008 Kiyoshi Matsui. All rights reserved.
Portions Copyright (c) 2016-present, Facebook, Inc. All rights reserved.
Portions Copyright (c) 2009-2017 Dave Gamble and cJSON contributors.
Portions Copyright (c) 2016-present, Facebook, Inc. All rights reserved.
Portions Copyright (c) 2001-2020 Python Software Foundation; All Rights Reserved.
Portions TM & (c) 2009-2015 Lucasfilm Entertainment Company Ltd. or Lucasfilm Ltd.
All rights reserved.

Portions of this software are based in part on the work of the Independent JPEG
Group.

This software contains Autodesk FBX code developed by Autodesk, Inc. Copyright 2020
Autodesk, Inc. All rights, reserved. Such code is provided "as is" and Autodesk,
Inc. disclaims any and all warranties, whether express or implied, including
without limitation the implied warranties of merchantability, fitness for a
particular purpose or non-infringement of third party rights. In no event shall
Autodesk, Inc. be liable for any direct, indirect, incidental, special, exemplary,
or consequential damages (including, but not limited to, procurement of substitute
goods or services; loss of use, data, or profits; or business interruption) however
caused and on any theory of liability, whether in contract, strict liability, or
tort (including negligence or otherwise) arising in any way out of such code.