AISSCE PRACTICAL EXAMINATON [2024]
SUBJECT- PHYSICS [042]
                                  CLASS-XII
                                    SET-A
          Maximum marks -30   Date- 22/01/2024         Time: 3 hrs
Q1. Perform two experiments selecting one from section A and one from section B.
                                                                                       (7 +7 marks)
                                              Section A
1.To determine resistivity of two / three wires by plotting a graph for potential difference versus
current.
2. To find resistance of a given wire / standard resistor using meter bridge.
3.To verify the laws of combination (series) of resistances using a meter bridge.
                                 OR
To verify the laws of combination (parallel) of resistances using a meter bridge.
4. To determine resistance of a galvanometer by half-deflection method and to find its figure of
 merit.
                                              Section B
1.To find the value of v for different values of u in case of a concave mirror and to find the focal
length
2.To find the focal length of a convex lens by plotting graphs between u and v or between 1/u and
1/v.
3.To determine angle of minimum deviation for a given prism by plotting a graph between angle of
incidence and angle of deviation.
4. To draw the I-V characteristic curve for a p-n junction diode in forward and reverse bias.
Q3. Do any one activity from section C.                                      (3marks)
                                              Section C
1.To assemble the components of a given electrical circuit.
2.To study the variation in potential drop with length of a wire for a steady current.
     3.To draw the diagram of a given open circuit comprising at least a battery, resistor/rheostat,
     key, ammeter and voltmeter. Mark the components that are not connected in proper order
     and correct the circuit and also the circuit diagram.
     4. To identify a diode, an LED, a resistor and a capacitor from a mixed collection of such
     items.
      5. Use of multimeter to see the unidirectional flow of current in case of a diode and an LED
     and check whether given electronic component (e.g. diode) is in working order.
     6.To observe refraction and lateral deviation of a beam of light incident obliquely on a glass
     slab.
    Q4. Investigatory project.                                                      (3 marks)
    Q5. Viva on experiments, activites and projects.                                (5 marks)
    Q6. Practical record [experiments and activities]                               (5 Marks)
   Internal examiner                                            External examiner