Category of the Industry :
ORANG
E
CONSENT ORDER NO. 2301152950823 DATED: 26/12/2023.
PROCEEDINGS NO.F.1203PDK/OL/DEE/TNPCB/PDK/W/2023 DATED: 26/12/2023
___________________________________________________________________
SUB: TNPC Board-Consent for Establishment-M/S MM FORGINGS LIMITED PLANT 2A S.F No.
298/10C2, 298/10D2, 298/11B, 298/11C2, 161, 160/1A, 160/1B, 160/2A, 160/2B, 160/3, 147/1,
301/10A2, 301/10B2, 301/10C, 301/9E2, 301/9F2, 301/9G2, 302/2, 302/3, 302/4, 302/5, 302/6,
302/7, 302/8, POOTHAGUDI Village, Viralimalai Taluk, Pudukkottai District - for the
establishment or take steps to establish the industry under Section 25 of the Water (Prevention and
control of Pollution)Act,1974, as amended in 1988(Central Act 6 of 1974)- Issued- Reg.
REF: 1.Unit’s Application No. 52950823 dated 22.05.2023 and resubmitted on 08.12.2023
2.FIR No. F.1203PDK/OL/AE/PDK/2023 dated 11.12.2023.
3.Minutes of the 112nd ZLCCC meeting held on 13.12.2023 (Item No.112-03)
Consent to establish or take steps to establish is hereby granted under Section 25 of the Water (Prevention and control of
Pollution) Act,1974, as amended in 1988(Central Act 6 of 1974) (hereinafter referred to as 'The Act') and the Rules and Orders made
there under to
The Director,
MM FORGINGS LIMITED PLANT 2A
Authorizing occupier to establish or take steps to establish the industry in the site mentioned below:
S.F No. 298/10C2, 298/10D2, 298/11B, 298/11C2, 161, 160/1A, 160/1B, 160/2A, 160/2B, 160/3, 147/1, 301/10A2,
301/10B2, 301/10C, 301/9E2, 301/9F2, 301/9G2, 302/2, 302/3, 302/4, 302/5, 302/6, 302/7, 302/8
POOTHAGUDI Village,
Viralimalai Taluk,
Pudukkottai District.
This Consent to establish is valid upto March 31, 2028, or till the industry obtains consent to operate under Section 25 of the
Water (Prevention and control of Pollution) Act, 1974, as amended in 1988 whichever is earlier subject to special and general
conditions enclosed.
Digitally signed by K
K SELVAKUMAR SELVAKUMAR
Date: 2023.12.26 12:38:10 +05'30'
District Environmental Engineer,
Tamil Nadu Pollution Control Board,
PUDUKKOTTAI
To
The Director,
M/s.MM FORGINGS LIMITED PLANT 2A,
SVK Towers, A25, 8th Floor, Industrial Estate, Guindy, Chennai, Tamil Nadu
Pin: 600032
Copy to:
1.The Commissioner, VIRALIMALAI-Panchayat Union, Viralimalai Taluk, Pudukkottai District .
2. Copy submitted to the Member Secretary, Tamil Nadu Pollution Control Board, Chennai for favour of kind information.
3. The District Environmental Engineer, Tamil Nadu Pollution Control Board, PUDUKKOTTAI for favour of kind information.
1
4. File
------------
2
SPECIAL CONDITIONS
1. This consent to establish is valid for establishing the facility for the manufacture of products/
byproducts (Col. 2) at the rate (Col 3) mentioned below. Any change in the product/byproduct and its
quantity has to be brought to the notice of the Board and fresh consent has to be obtained.
Sl. Description Quantity Unit
No.
Product Details
1. Steel Forgings (Machined) 30000 Tons/Annum
2. Steel Ingots 21600 Tons/Annum
2. The unit shall provide Sewage Treatment Plant and /or Effluent Treatment Plant as indicated below.
3
a Sewage Treatment Plant:
Treatment status: Individual STP
SL. No. Name of the Treatment No. of Units Dimensions in metres
Unit
1. Screen Chamber 1 0.50 x 1.0 x 1.0
2. Collection Tank 1 3.50 x 3.0 x 3.0
3. Aeration Tank 1 3.0 x 3.0 x 3.50
4. Settling Tank 1 3.0 x 3.0 x 2.50
5. Filter Feed Tank 1 3.0 x 2.0 x 2.0
6. Pressure Sand Filter 1 0.40 Dia x 1.50 Ht
7. Activated Carbon Filter 1 0.40 Dia x 1.50 Ht
8. UV Treatment 1 1.50 m3/hr
9. Treated Water 1 3.0 x 2.0 x 2.0
Collection Tank
10. Sludge Drying Beds 2 2.0 x 2.0 x 1.0
b Effluent Treatment Plant:
Treatment status: Individual ETP
SL. No. Name of the Treatment No. of Units Dimensions in metres
Unit
1. ETP - I For Coolant Oil 1 1
Effluent
2. Oil Trap 1 1.0 x 1.0 x 1.0
3. Collection Tank 1 2.0 x 2.0 x 2.0
4. Mixing Cum Settling 1 1.0 x 1.0 x 1.25
Tank
5. Filter Feed Tank 1 2.0 x 2.0 x 1.50
6. Pressure Sand Filter 1 0.35 Dia x 1.625 Ht
7. Activated Carbon Filter 1 0.35 Dia x 1.625 Ht
8. Micron Filter 1 2.0 m3/Hr
9. Treated Water 1 2.0 x 2.0 x 1.50
Collection Tank
10. Sludge Drying Beds 3 2.0 x 2.0 x 1.0
11. ETP - II For Cooling 1 1
Tower Bleed Off
12. Collection Tank 1 1.0 x 1.0 x 1.0
13. Elevated Solar 6 5.0 x 4.0 x 0.40
Evaporation Pan
3. This consent to establish is valid for establishing the facility with the below mentioned outlets for the
discharge of sewage/trade effluent. Any change in the outlets and the quantity has to be brought to the
notice of the Board and fresh consent has to be obtained.
4
Outlet No. Description of Outlet Maximum daily discharge Point of disposal
in KLD
Effluent Type : Sewage
1. Sewage 30.0 On land for gardening
Effluent Type : Trade Effluent
1. Trade Effluent I (Coolant 4.0 On land for gardening
Oil Effluent)
2. Trade Effluent II 0.5 Elevated Solar
(Cooling Tower Bleed- Evaporation Pans
Off)
4. Special Additional Conditions:
The unit shall obtain No Objection Certificate (NOC) from the Tamil Nadu Bio Diversity Board
/National Bio Diversity Authority if the unit is using any Biological resources or knowledge
associated thereto as per the provisions of Biological Diversity Act 2002.
The industries shall take all efforts to use and popularize “Mission LiFE” logo and mascot which is
available in TNPCB & MoEFCC website. They shall also request their employees to adopt “Mission
LiFE” action points and document the same and furnish half yearly report to Board.
5. Additional Conditions:
1.The unit shall install the induction furnace and panel board for the proposed capacity so that the
melting capacity is within the threshold limit of 30,000 T/Annum as stipulated in the S.O. 3067(E)
dated 01.12.2009 issued by MoEF&CC, Government of India.
2.The unit shall provide Sewage Treatment Plant to treat the sewage to be generated from domestic
sewage and canteen wastewater as proposed before commissioning.
3.The unit shall provide EMFMs with computer recording facility at the inlet and outlet of the STP as
proposed before commissioning.
4.The unit shall provide Effluent Treatment Plant to treat the coolant oil effluent as proposed before
commissioning.
5.The unit shall provide EMFMs with computer recording facility at the inlet and outlet of the ETP as
proposed before commissioning.
6.The unit shall provide necessary arrangements to receive the treated sewage and treated trade
effluent and utilize the same for gardening by adopting hydraulic loading rate of 35 KL/Hec/Day.
7.The unit shall provide elevated solar evaporation pan of 120 Sq.m area to handle the trade effluent
generated from cooling tower bleed off as proposed.
8.The unit shall provide separate energy meter for the STP & ETP system before commissioning of
the unit to ensure the continuous operation of the STP & ETP.
9.The unit shall furnish the ground water clearance from the competent authority before applying for
CTO.
10.The unit shall provide rainwater harvesting facility within the premises so as to recharge ground
water in that area.
11.The unit shall ensure that no other activities attracting EIA notification 2006 shall be carried out at
this site/ in the premises of the unit.
12.The unit shall provide adequate fire safety equipments in the working area as proposed before
commissioning.
13. The unit shall provide labeling and coloring of all the pipe lines suitably to distinguish them.
14.The unit shall not use “use and throwaway plastics” such as plastic sheets used for food wrapping,
spreading on dining table etc, plastic plates, plastic coated tea cups, plastic tumbler, water pouches and
pockets, plastic straw, plastic carry bag and plastic flags irrespective of thickness, within the industry
premises during construction. Instead unit shall encourage use of eco friendly alternative such as
banana leaf, arecanut palm plate, stainless steel, glass, porcelain plates/cups, cloth bag, jute bags etc.
15.The unit shall ensure that “In case of revision of consent fee by the government, the unit shall remit
the difference in amount within one month from the date of notification. Failing to remit the consent
fee, this consent order will be withdrawn without any notice and further action will be initiated against
the unit as per law”.
Digitally signed by K
K SELVAKUMAR SELVAKUMAR
Date: 2023.12.26 12:38:41 +05'30'
District Environmental Engineer,
Tamil Nadu Pollution Control Board,
PUDUKKOTTAI
5
6
GENERAL CONDITIONS
1. This consent to establish cannot be construed as consent to operate and the unit shall not commence
the operation without obtaining the Consent to operate.
2. The applicant shall make a request for grant of consent to operate at least thirty days, before the
commissioning of trial production.
3. Any Change in the details furnished in the conditions has to be brought to the notice of the Board and
got approved by the Board, before obtaining consent to operate under the said Act.
4. The unit has to comply with the provisions of Public Liability Insurance Act, 1991 to provide
immediate relief in the event of any hazard to human beings, other living creatures/plants and
properties while handling and storage of hazardous substances (wherever applicable).
5. Consent to operate will not be issued unless the unit complies with the conditions of consent to
establish.
6. The unit shall provide adequate water sprinklers for the control of dust emission during the loading
and unloading of construction material so as to minimize the dust emission.
7. The unit shall provide water sprinklers along the temporary roads inside the premises to avoid fugitive
dust emission during the vehicle movements.
8. The unit shall develop green belt of adequate width around the premises.
9. In case there is any change in the management, the unit shall inform the change with relevant
documents immediately.
Digitally signed by K
K SELVAKUMAR SELVAKUMAR
Date: 2023.12.26 12:39:06 +05'30'
District Environmental Engineer,
Tamil Nadu Pollution Control Board,
PUDUKKOTTAI