From a small shop on Cleveland

Ohio’s west side to our

out high-tech
factory in Gainesville, Georgia,
Harris History is as impressive as the
products we produce.

HARRIS CALORIFIC CO., a pioneer

in the production of gas welding and
cutting apparatus was founded by
John Harris, who discovered the oxy-
acetylene method of cutting in 1899 After World War 11, the company found
while conducting research on the new markets for its products in research
manufacture of synthetic rubies. His laboratories, aircraft and missile
discovery led to the manufacture of manufactures. Under Clarence Taylor, Harris
the nation’s first flame-cutting torch. expanded national distribution, developed
new equipment, stepped up advertising, and
After exhibiting his cutting torch at established subsidiaries and distributorships
the 1904 St. Louis World’s Fair he abroad.
established the company in 1905.
Harris continued to refine its gas Harris Australia/New Zealand is a proud
torches and began to produce related member of the global family and is staffed
accessories, such as gas pressure by an excellent team. Their vast collection
regulators. of knowledge is readily available to support
the Harris products/spare parts/demo’s/
The U.S. Welding Co. of Minnesota gas audits/onsite training/productivity
purchased Harris in 1926. U.S. accesments and cost reduction programs.
Welding’s founder Lorne Campbell,
Jr., served as President until the
1950’s when Clarence Taylor assumed
the position.

www.harrisproductsgroup.com.au
 Made
in Acetylene Kits
Europe
K Craftsman
i The Regulators are ideally suited for the mobile 601-AC
light trade.
t Flexible tip allows the operator to get into tight
s places.
The HARRIS mixing system uses gas at much
lower pressures which provides gas savings and
increased safety.
50905 Operator’s will enjoy the front mounted valves,
50903 providing the ability to alter flame
one handed.
Also includes Reg-End Flashback Arrestors and 601-OX
00908 Flashguards on Handle.

Includes 10 metres of 6mm Harris Oxy/Acet

019038 Hose.
Part No 19660116
H192E

818Z001

Contractors Gaugeless
As above with larger regulators Model 818
which are ideal on the back of trucks and utes as 818Z003
there are no gauges to be damaged.

188TAR 188TAL
Part No 1968186

Complies to
ISO 5172
AS 4267
AS 4839
Standards

6RBTH10M+F Contractors
Model 801 regulators with large diameter easy
to read gauges. 801E150AC21
Hard hats are available to protect the gauges
whilst on the back of a truck or a ute.

Part No 19680116
19680126 801E1000OX13
(Side Entry OXY)

2A
www.harrisproductsgroup.com.au
 Made
in LPG Kits
Europe
Craftsman 601-LPG K
1390-3N The Regulators are ideally suited for the mobile i
light trade.
1390-5N Flexible tip allows the operator to get into tight t
places. s
The HARRIS mixing system uses gas at much
lower pressures which provides gas savings and
00908N increased safety.
D50C Operator’s will enjoy the front mounted valves,
providing the ability to alter flame
one handed. 601-OX
Also includes Reg-End Flashback Arrestors and
Flashguards on Handle.

Includes 10 metres of 6mm Harris Oxy/LPG

Hose.

Part No 19660117
H192S 019038

818Z002

Contractors Gaugeless
As above with larger regulators Model 818
which are ideal on the back of trucks and utes as 818Z003
there are no gauges to be damaged.

188TAR 188TAL
Part No 1968187

Complies to
ISO 5172
AS 4267
AS 4839
Standards

Contractors 801Z005
6BOTH10M+F
Model 801 regulators with large diameter easy
to read gauges.
Hard hats are available to protect the gauges
whilst on the back of a truck or a ute.

Part No 19680117
801E1000OX13
19680127
(Side Entry OXY)

2B
www.harrisproductsgroup.com.au
 Made Acetylene Upgrade Kit
in
Europe
K Craftsman
i The Regulators are ideally suited for the mobile
601-AC
light trade.
t 50905
Flexible tip allows the operator to get into tight
s places.
The HARRIS mixing system uses gas at much
50903 lower pressures which provides gas savings and
increased safety.
Operator’s will enjoy the front mounted valves,
providing the ability to alter flame
one handed.
00908 362 Also includes Reg-End Flashback Arrestors and
Flashguards on Handle. 601-OX

Includes 10 metres of 6mm Harris Oxy/Acet

Hose.

H192E
3690 0AC Part No 193660116
3690 1AC

818Z001

Contractors Gaugeless
As above with larger regulators Model 818
which are ideal on the back of trucks and utes as 818Z003
there are no gauges to be damaged.

188TAR 188TAL
Part No 19368186
019038
Complies to
ISO 5172
AS 4267
AS 4839
Standards

Contractors
6RBTH10M+F 801E150AC21
Model 801 regulators with large diameter easy
to read gauges.
Hard hats are available to protect the gauges
whilst on the back of a truck or a ute.

Part No 193680116
193680126 801E1000OX13
(Side Entry OXY)

3A
www.harrisproductsgroup.com.au
 Made LPG Upgrade Kit
in
Europe
Craftsman K
601-LPG

1390-3N
The Regulators are ideally suited for the mobile i
light trade.
Flexible tip allows the operator to get into tight t
1390-5N places.
The HARRIS mixing system uses gas at much
s
lower pressures which provides gas savings and
increased safety.
D50C Operator’s will enjoy the front mounted valves,
providing the ability to alter flame
one handed.
00908N Also includes Reg-End Flashback Arrestors and
Flashguards on Handle. 601-OX

Includes 10 metres of 6mm Harris Oxy/LPG

Hose.

3690 0P Part No 193660117

H192S
3690 1P 362
818Z002

Contractors Gaugeless
As above with larger regulators Model 818
which are ideal on the back of trucks and utes as 818Z003
there are no gauges to be damaged.

188TAR 188TAL
Part No 19368187
019038

Complies to
ISO 5172
AS 4267
AS 4839
Standards

Contractors 801Z005
6BOTH10M+F
Model 801 regulators with large diameter easy
to read gauges.
Hard hats are available to protect the gauges
whilst on the back of a truck or a ute.

Part No 193680117
193680127 801E1000OX13
(Side Entry OXY)

3B
www.harrisproductsgroup.com.au
 Made Acetylene Compatible Kit
in
Europe
Classic kit-B/W/H/C
K
i
t The Regulators are ideally suited
s for the mobile light trade.
The HARRIS mixing system uses
gas at a lower pressure i.e. 40Kpa
on Acet which provides gas
23A905 savings and increased safety.
733HC 23A908 801E150AC21
Operator’s will enjoy that the
handle, suits right or left hand.
Cutting attachment has a built in
“ease-on” valve, for less sparks
E43HC when starting and hot tips ensure
quick starting.
Kit includes Reg-End Flashback
CT41-8
Arrestors and Flashguards on
Handle.
CT41-12
188TAR 188TAL Includes 10 metres of 6mm Harris
Oxy/Acet Hose.
801E1000OX13

Part No 637380116HC
632HC

Flashguards

801E150AC21
Complies to
6RBTH10M+F AS 4267
AS 4839
Standards

8011000OX13

Part No 637380126HC
(Side entry Oxy)

4A
www.harrisproductsgroup.com.au
 Made LPG Compatible Kit
in
Europe
Classic kit-B/H/C
K
801Z005 i
1390-5N The Regulators are ideally suited t
for the mobile light trade. s
8593
The HARRIS mixing system uses
1390-8N gas at a lower pressure i.e. 40Kpa
on Acet which provides gas
savings and increased safety.
733HC
Operator’s will enjoy that the
handle, suits right or left hand.
Cutting attachment has a built in
“ease-on” valve, for less sparks
E43HC when starting and hot tips ensure
quick starting.
Kit includes Reg-End Flashback
CT44-8
Arrestors and Flashguards on
Handle.
CT44-12
188TAR 188TAL Includes 10 metres of 6mm Harris
Oxy/LPG Hose.
801E1000OX13

Part No 637380117HC
632HC

801Z005

6BOTH10M+F Flashguards

Complies to
AS 4267
AS 4839
Standards

8011000OX13

Part No 637380127HC
(Side entry Oxy)

4B
www.harrisproductsgroup.com.au
 Made Acetylene Original Kit
in
Europe
Classic kit-B/W/H/C
K
i The Regulators are ideally suited
t for the mobile light trade.
The HARRIS mixing system uses
s gas at a lower pressure i.e. 40Kpa
on Acet which provides gas
23A905 savings and increased safety.
23A908
Operator’s will enjoy that the
801E150AC21
handle, suits right or left hand.
Cutting attachment has a built in
E43
“ease-on” valve, for less sparks
when starting and hot tips ensure
quick starting.
Kit includes Reg-End Flashback
Arrestors and Flashguards on
0AC Handle.

1AC Includes 10 metres of 6mm

Harris Oxy/Acet Hose.
188TAR 188TAL 733
801E1000OX13

Part No 637380116
632 Flashguards

Complies to
ISO 5172
AS 4267 801E150AC21
AS 4839
6RBTH10M+F
Standards

8011000OX13

Part No 637380126
(Side entry Oxy)

4C
www.harrisproductsgroup.com.au
 Made LPG Original Kit
in
Europe
Classic kit-B/H/C
K
The Regulators are ideally 801Z005 i
suited for the mobile light trade. t
1390-5N
The HARRIS mixing system uses
8593 gas at much lower pressures i.e. s
1.5Kpa on LPG which provides
1390-8N gas savings and increased safety.
Operator’s will enjoy that the
handle, fitting right or left hand.
Cutting attachment has a built in
B435
“ease-on” valve for less sparks
when starting and hot tips ensure
quick starting.
Includes Reg-End Flashback
Arrestors and Flashguards on
0NX Handle.

1NX Includes 10 metres of 6mm

Harris Oxy/LPG Hose.
188TAR 188TAL
801E1000OX13
493F

Part No 634980117
632 Flashguards

801Z005
Complies to
ISO 5172
6BOTH10M+F AS 4267
AS 4839
Standards

8011000OX13

Part No 634980127
(Side entry Oxy)

4D
www.harrisproductsgroup.com.au
 Acetylene Original Kit Made
in
Europe
K
i
Pro kit-B/W/H/C
t The Regulators are ideally suited
s for mobile heavy duty applications.
Snap Safe Protection is the answer
825EX150AC33
to lifting safety to a new level. The
HARRIS mixing system uses gas at
lower pressure i.e. 40Kpa on Acetylene
23A905 23A908 which provides gas savings and
increased safety.

E43 Operator’s will enjoy that the high

733 flow handle, suits right or left hand. 825EX1000OX3
Cutting attachment has a built in “ease-
on” valve, for less sparks when starting
and hot tips ensure quick starting.
Kit includes Reg-End Flashback
0AC Arrestors and Flashguards on the
Handle.

1AC

Part No 437382516
188TAR 188TAL
Snap Safe

Complies to
ISO 5172
043013
AS 4267
AS 4839
Standards
Flashguards

Part No 437382526
(Side entry Oxy)

Snap Safe = Solution!

6RBTH10M+F

5A
www.harrisproductsgroup.com.au
 LPG Original Kit Made
in
Pro kit-B/H/C Europe

The Regulators are ideally suited for

K
8593 mobile heavy duty applications. i
Snap Safe Protection is the answer to t
lifting safety to a new level. The HARRIS
mixing system uses gas at much lower
s
825Z005
pressure i.e. 1.5Kpa on LPG which
1390-5N
provides gas savings and increased safety.
1390-8N
Operator’s will enjoy that the high flow
handle, will suit right hand and left hand
users. Cutting attachment has a built in
“ease-on” valve, for less sparks when
493F starting and hot tips ensure quick starting.
Kit includes Reg-End Flashback Arrestors
and Flashguards on the Handle.

B435

0NX
Part No 434982517
1NX Snap Safe
Protection

188TAR 188TAL 825EX1000OX3

Complies to
ISO 5172
AS 4267
AS 4839
043013
Standards
Flashguards

Part No 434982527
(Side entry Oxy)
.

Snap Safe = Solution!

6BOTH10M+F

5B
www.harrisproductsgroup.com.au
 Made
LPG Fab Kit C/H/G in
Europe
K Part No 14282517 (Vertical Inlet Oxy)
i Part No 14282527 (Side Entry Oxy)
t This kit suits boilermaker workshops, the performance of
this equipment enhances Oxy/Propane as a real low cost
s alternative.
Cut/heat/Gouge in one safe kit!
Features include -
4Harris quality in every item 4Large diaphragm improves sensitivity
4Solid and tough
4Tips and spare parts readily available
4Hose included in kits
4Gauge hard hats incl. 1882TAR

Hot Tip
Technology
4Snap Safe increases safety
1NX
825EX1000OX3

2NX 142033
4Two piece,
pull apart
cutting tip 3NX Complies to
ISO 5172
3GG
AS 4267
4Hot/quick AS 4839
gouging/heating Standards
H622P

4Easy to read gauges

8BOTH10M+F

4High flow
regulators

4Ease-on cutting valve

825Z005

515mm x 435mm x 225 4Operates on very low fuel pressure

1882TAL

6
www.harrisproductsgroup.com.au
 Pressure Regulators
Model 601
This regulator is primarily designed for the small industry i.e.
home handyman where light use and lower cost are the main
R
concerns. Made in Harris Europe complies to EN ISO 2503 e
g
Features Include- Wt. 0.8kg
4Tough - solid metal body & bonnet
601-Oxy u
4Filter l
4Built-in relief 601-Acet a
4Clear colour coding t
4Easy to read metal cased gauges o
4Special threads and seals-reduces leaks
r
s
601-LPG
Model 801
This conventional gauge regulator is designed to control
pressure and flow. Typical Harris design permits a small,
compact, rugged regulator with unusually high flow and
the following:

Features Include- Wt. 1.3kg

4Tough - solid metal body & bonnet Made
4Monel filter in
4Built-in burst relief Europe
4Clear colour coding
4Large, easy to read gauges, with safety seal
4Conforms to AS 4267
801E1000X13
4Rated to 240 bar
4Oxygen Fitted with internal self reseating relief valve

801E150AC21 Point of purchase display.

Acetylene 150K Vertical Inlet
801E10000X13 Either hangs or self standing
Oxygen 1000K Vertical Inlet
80110000X13 on a shelf
Oxygen 1000K Side Inlet
801Z005 Propane 350K Side Inlet (one gauge)

Model 818
This Regulator is identical to the 801 but without gauges.
Cylinder pressure is shown on the indicator. Delivery pressure
is set by turning the black knob on the calibrated (engraved)
bonnet, lining up with the pressure mark. Ideal for working in
tough conditions. Fits onto side or vertical outlet cylinders.
Wt. 1.2kg

818Z001 Acetylene 150kPa Vert. Inlet

818Z002 Propane 350kPa Side Inlet

818Z003
818Z003 Oxygen 800kPa Vert. Inlet
818Z001

7
www.harrisproductsgroup.com.au
 Flow Control Regulators
R Model 801
e
g 801E30L Argon 30LPM Flowgauge Vertical Inlet
u 80130LKCD271 C02 30LPM Flowgauge Side Inlet
l

a 80130LKAR211 Argon 30LPM Flowgauge Side Inlet
t Made
o Features include- Wt. 1.3kg
in
4Easy to read gauges
r Europe
4Inlet filter to trap impurities
s 4Accurate
4Fitted with internal self reseating safety relief valve
4Forged brass body for maximum strength
R 4Smooth, steady adjustment
e 4Special threads and seals to reduce risk of leaking expensive odourless gas
g 4Harris capsule seat with filter for reliability
801E30L

u 4Filter before outlet nipple to ensure flow
l Model 821DB
a Ideal for MIG or TIG applications where different flowrates are
t required from the one devise. This design provides accurate
o regulation to both flowmeters.
r
s Features include -
4Proven high pressure seat
4Tamper proof, self reseating safety relief valve
4Precise flow regulation
4Large, easy to read gauge in kPa
4Quality, accurate measurement
821DB2
4 Precise needle valves for accurate adjustment

821DB1 CO2, regulator (rear inlet) + 2 flowmeters
821DB2 Argon, regulator (vert. inlet) + 2 flowmeters
821DB3 Argon, regulator (rear inlet) + 2 flowmeters

Model 811
A heater and flow regulator in one neat unit. Both items
manufactured by Harris to ensure long life.

Features include -
4Proven high pressure seat
4Tamper proof, self reseating safety relief valve
4Large, easy to read gauges
4Conforms to EN 562
4Assures high safety levels, long life
81130LH 81130LH CO2, flow regulator with heater
8
www.harrisproductsgroup.com.au
 Flow Control Regulators
Features include -
4CE marked R
4Two independent heating elements controlled by thermostat e
4Stabilized temperature up to 30 LPM g
4Overheating protection with reseatable thermal fuse u
4Insulation IP 64 (EN 60529) l
4Voltage: 240 a
43 meters long power cable t
811800KH CO2, pressure regulator with heater o
r
NOTE: Can be modified by Harris to accept flow meters 811800KH s
Model 601
The 601 flow gauge regulator is designed for the home
handyman user. Adjustment is 0-30 Lpm with value for money
is a key factor.
Features include- Wt. 0.8kg
4Brass body & Bonnet
4Metal Case Gauges
4Complies with EN13918
4Harris manufactured to ISO 9002
4Special threads/sealing to reduce risk of leaks
601R30L 4Fits E or D cylinders
601-FM Pre-set, 601 Vert Inlet reg with 30Lpm model 866 flowmeter
601FM-R Pre-set, 601 Rear Inlet suit side inlet and small cylinders 30Lpm flowmeter
No Photo
Model 801 Preset
Specifically engineered to perform reducing task prior to fitting
of flowmeter. Includes safety relief valve to protect flowmeter.
801Z017 Argon, Pre-set, Side Inlet
801Z018 C02, Pre-set, Side Inlet
801Z019 Argon, Pre-set, Vert. Inlet
801Z020 Argon, Pre-set, Vert. Inlet + 86630L
801Z021 Argon, Pre-set, Vert. Inlet + 86615L
801Z022 Argon, Pre-set, Side Inlet + 86630L
801Z019 801Z023 Argon, Pre-set, Side Inlet + 86615L

Model 866 Flowmeter

Evolved from our medical range into an industrial
configuration, it’s degree of accuracy and quality will bring
86630L enhanced measurement to any application.
Features include- Wt. 0.4kg
4Easy to read
4Virtually unbreakable outer tube
Made 4UV Stabilize plastics
in 4Needle valve for smooth adjustments
Europe 4Inlet/outlet 5/8”
4Fits 801Z017, 801Z018 & 801Z019 or pipelines

86630L Flowmeter 0-30 LPM

86615L Flowmeter 0-15 LPM
9
www.harrisproductsgroup.com.au
 Pressure Regulators
R Model 825
e In this Regulator you get extra strength, safety and large
g flows with excellent regulating characteristics. Combined
u Made with the latest in design, safety and quality.
l in Features Include- Wt. 1.8kg
a Europe 4Rugged all metal construction
t 4Monel filter to improve life; easily changed
o 4Accurate - full cylinder pressure is controlled by the
r large 70mm diaphragm
s 4Large flows
S NAP
825EX1000OX3 4Safe, modern, proven seat design

S AFE 4Large, easy to read colour coded gauges with safety seals
4Complies to AS 4267
4Built in burst relief
4Unique extra safety of the Snap Safe valve, built
into inlet stem. Protects if a cylinder falls over.
Applies to regs with an S in description


825EX150AC33 Acetylene 150K S Vert. Inlet
825Z016 Oxygen 400 K S Vert. Inlet
825EX10000X3 Oxygen 1000K S Vert. Inlet
825X10000X33 Oxygen 1000K S Side Inlet

825Z064 825Z005 Propane 400 K S Side Inlet

825Z064 Oxygen 1500K Vert.Inlet

825Z070 Oxygen 1500K Side Inlet

825Z084 Nitrogen 1000K Side Inlet

825Z085 Nitrogen 1500K Side Inlet
825Z080

825EX1000ARG Argon 1000K S Vert. Inlet

825EA1000HE Helium 1000K Vert. Inlet

825EA1000H30 Hydrogen 1000K Vert. Inlet

8251000CD206 C02 1000K Side Inlet

825Z080 Nit 4000K SS diaphram Side Inlet
825Z066 HP SS diaphragm1000K Vert. Inlet
825Z112 HP SS diaphragm1000K Side Inlet

825ET800OX23 Oxygen 800K Sav ‘T’ Lock V.I.

825TX400NII *Nitrogen 400K Sav ‘T’ Lock V.I.

825DT400CDII *CO2 400K Sav ‘T’ Lock
825ET8000X23 *Internal self reseating safety relief valve

10
www.harrisproductsgroup.com.au
 High Flow Pressure Regulators
R Model H25 (Cylinder) R
e In some applications there is a requirement for high flow, e
g high pressure and high purity. This cylinder regulator offers g
u unparalleled features at exceptional value for money. It suits u
l applications which are specifically designed for high flow
requirements for feeding industrial gas pipelines for plasma,
l
a and laser cutting systems. a
t t
o For example, supplying Acetylene into a factory via a pipeline o
r starts with having the right regulator at the manifold. At
Harris, we set out to design and manufacture a regulator for
r
s H2515B exactly this purpose, which delivers large flow over a variety s
of pressures, even when cylinder pressure is low.

Features include -
4Conforms to EN ISO 2503
4Capsule valve, Stainless Steel filter
4Stainless Steel diaphragm (not Acetylene)
4Maximum inlet 300 bar
4Outlet pressure 1.5, 15 and 40 bar

New 4Heavy duty body machined from bar stock

4Large G. 1/2” or G. 3/8” outlet connection
4Side and vertical inlet connection
4External safety relief valve (not Acetylene)
4Flow over 700 m3/h (maximum)

H251.5AC-SE 150 kPa Side Inlet
H251.5BAC 150 kPa Vert. Inlet
H2515B 1500 kPa Side Inlet
Made
H251.5BAC H2540B 4000 kPa Side Inlet
in Note:
(1) Specify gas when ordering.
Europe (2) Vertical inlet models are available on request.
(3) Outlet can be reduced from 1/2” npt to 1/4” npt
on request

Model H47 (Pipeline)

This high flow regulator is designed for installation in a
pipeline. The high flow and high purity levels are ideal
for some laser and plasma applications, as well as other
applications.

Features include -
4Maximum inlet of 60 bar/6000kpa
4Outlet pressure 10, 15, 25 and 40 bar
4Rear inlet connections
4Flow over 370 m3/h (maximum)

H4740B 4Other features are the same as series H25

H4715B 15 bar 1500 kPa Rear Inlet

H4740B 40 bar 4000 kPa Rear Inlet
11
www.harrisproductsgroup.com.au
 Flow Control Regulators
R Model 825 Sav ‘T’Lock
e This unique Cylinder Regulator is part of the Sav T’Lock
g range, and as such, has many features and benefits which
u are significant for the end user:
l Features Include- Wt. 1.8kg
a 4Large diaphragm
t 4Large easy to read gauges
o 4Precise control of Gas used
r 4Set ‘N’ Forget Expect 25%
s 4Key lockable gas savings
4Reduces the amount of surging
4Based on the Model 25
4Complies to AS4267

825ET30LAR21 Argon 0-30LPM Vertical Inlet

825T30LAR211 Argon 0-30LPM Side Inlet

825T30LCD111 CO2 0-30LPM Side Inlet

Innovation NOTE: Sold without keys; as you could have many regulators in
a workshop and only 2 keys. Keys are under Accessories,
Part No. A825ES Page 46

YES!
Model 847 Sav ‘T’Lock We install
pipeline
Pipeline systems
An extension of the Sav ‘T’Lock range - designed to
operate in a pipeline application.

Features Include- Wt. 1.5kg

4 Suitable for low pressure inlet (range 400-2500kPa)
4 Outlet at 6 o’clock
4 Large diaphragm Expect 25%
4 Large easy to read gauges gas savings
4 Control over amount of gas used
4 Key lockable
4 Reduces the amount of surging
4 Burst relief built-in
4 Easily handles pressure fluctuations
4Maintain constant work procedures
4Complies to AS4840-2001

847T30LAR237 Argon/C02/Mixtures 0-30LPM

Note: Sold without keys; Keys are under Accessories,
Part No. A825ES Page 46
12
www.harrisproductsgroup.com.au
 Pipeline Regulators
Model 847 R
e
As Pipelines become more common in the work place, it
is important that each outlet has a regulator specifically
g
designed to handle the lower pressures (compared to u
Made cylinders) and also to supply a constant supply of gas l
in through the outlet of the regulator. As many will agree, there a
Europe is nothing worse than the power supply fluctuation while
drilling. The same can be said for gas! Therefore you need a
t
regulator to meet the conditions of a pipeline - the Model 847. o
r
Features include - Wt. 1.5kg s
4Brass Body
4High flow
8471000OX812 4Precise flow regulation
4Large 70mm diaphragm
4Large, easy to read gauge in kPa
4Repair - simple, fast and easy
YES!
4Complies to AS4840-2001
We install
* NOTE: a) 1/4” NPT female connection in rear
pipeline
b) Can be fitted with adaptor to suit a point valve
systems

847150AC797 Acetylene, 0-150kPa Rear Inlet

847400LP818 Propane/LPG/Nat. Gas 0-400kPa Rear Inlet

84710000X812 Oxygen, 0-1000kPa Rear Inlet

84715000X807 Oxygen, 0-1500kPa Rear Inlet

Pipeline Regulator Kit

This is a new concept which allows the purchase of a
complete unit ready for installation. As Pipelines are
becoming more popular (as a cost saving for industry), a
Kit with the following features is required.

Features include - Wt. 2.2kg

4Model 847 Large flow regulator etc, See Above
4Large flow flash back arrestor
4Pipeline assembly purposely designed for the
application and ease of installation
4Easy, visual notice of which ones are on/off
4Easy to turn off in emergency

8470607FBAAC Acetylene, 0-150kPa Pipeline Kit

8470607FBAOX Oxygen, 0-1000kPa Pipeline Kit
8470607FBAPR Propane, 0-400kPa Pipeline Kit
8470607FBANA Natural, 0-150kPa Gas Pipeline Kit

Note: Can be supplied on a backing board. New version of assembly not shown in photo.
Note: Fittings to suit existing /new piping can be fitted by Harris
13
www.harrisproductsgroup.com.au
 Pipeline Regulators Cont.
R
e
g 8470607ARGON Argon/C02 0-30LPM Pipeline Kit
u 0607ARGON Argon Pipeline Assembly
l 0607OXYGEN
Oxygen Pipeline Assembly
a 0607ACET Acetylene Pipeline Assembly

t
0607PROPANE Propane Pipeline Assembly
o 84790LHLPG Model 847 - 90º Adaptor, Left Hand
r
for Inlet, to suit point valves
s 84790RHOXY Model 847 - 90º Adaptor, Right Hand for

Inlet, to suit point valves

Ideal system to ensure flowmeter within a pipeline is accurate and flow is consistent
601866-30L Reg with 1/2”bsp nipple and 30LPM flowmeter
601866-15L Reg with 1/2”bsp nipple and 15LPM flowmeter
601Z052 Mini Regulators to fit excisting flowmeter/pipeline

Pressure Regulators

Model 896 (Multistage Cylinder)

Made
A cylinder regulator which has outstanding pressure/ flow
in characteristics, it has become a standard (worldwide) by
Europe which regulators are judged. Two regulators in one tough
forged body, enables cylinder pressure to be reduced by up to
90% prior to entering second stage where the outlet pressure
is set. Ideal for users requiring high accuracy; especially
for quality welding, cutting, metal spraying and industrial
laboratory use.

Features include - Wt. 2.4kg

4Accurate - two stages
4Reliable - proven design
4Tough - forged brass body
4Safe - built in relief devices
4Gauges - kPa
4Long lasting
4Complies to AS4267

896E150AC21 Acetylene 0-150K Vertical Inlet

896ED10000X1 Oxygen 0-1000K Vertical Inlet
896ED10000X2744 Oxygen 0-1000K Side Inlet
896ED1000ARG Argon 0-1000K Bottom Inlet

14
www.harrisproductsgroup.com.au
 Pressure Regulators Made
in
Europe R
896ED1000HEL Helium 0-1000K Vertical Inlet

e
896ED1000HYD Hydrogen 0-1000K Vertical Inlet g
u
896ED15000X3 Oxygen 0-1500K Vertical Inlet l

896ED1500ARG Argon 0-1500K Vertical Inlet
a
t
896ED1500NIT Nitrogen 0-1500K Vertical Inlet o
r
896ED1500HEL Helium 0-1500K Vertical Inlet

s
896ED1500HYD Hydrogen 0-1500K Vertical Inlet

896D1000NIT Nitrogen 0-1000K Side Inlet

896D15000X12 Hydrogen 0-1500K Side Inlet

896D15000X39 Oxygen 0-1500K Side Inlet

896D1500ARG Argon 0-1500K Side Inlet

896D1500NIT Nitrogen 0-1500K Side Inlet

896EDS25000X Oxygen 0-2500K Vertical Inlet

NOTE: Regulators can be made for most gases or mixtures/also to
customer’s specifications. Contact your local Harris distributor
for details.

Model 996
This range of multistage regulators are suited for 300bar
inlet pressure and will provide excellent pressure and flow
characteristics from this high pressure inlet to a lower pressure
NEW
application. Features include Stainless Steel diaphragm in both
stages.

996D1000OX Oxygen 0-1000Kpa Side Inlet

996D1000OX Oxygen 0-1000Kpa Vertical Inlet

NOTE: Regulators can be made for most gases or mixtures/

also to customer’s specifications. Contact your local Harris
distributor for details.
Spare parts are
available for all
products
15
www.harrisproductsgroup.com.au
 Pressure Regulators Cont.
R Model 987
e
g The Model 987 High Pressure Cylinder Regulator is
designed specially for applications that require a range
u of delivery pressures from 0-10,000kPa and 0-17,000kPa
l accurately and safely. Available for all non-corrosive gases
a used in oil refineries, chemical plants, research laboratories,
t defence and general industry where high working pressures
are required.
o Suitable for hydro-generation, catalytic reductions,
r accelerated testing and pressure testing.
s
Features Include- Wt. 2.2kg
987Z078 4High delivery range
4Stainless steel diaphragm for strength and accuracy
4Large easy to read gauges
4Brass bonnet & body - maximum safety, strength
4Sintered monel metal inlet filter to trap impurities
4Rated to 380 Bar for Inert Gases
987Z078 Nitrogen, Oxygen, 0-10,000kPa Side Inlet
987Z079 Nitrogen, Oxygen, 0-17,000kPa Side Inlet
3200326 Nitrogen, Self relieving, 21000kPa Side Inlet

Model HP750
The Model HP750 series regulator is a high pressure, high
Made flow regulator system. The key to the performance of this
in regulator is the servo-dome load technology. The servo-dome
USA load feature allows the regulator to supply high flow rates with
straight line pressure regulation.
Applications include: Laser assist gases, Pressure transfer,
Blanketing & High flow manifolds

3000869 0-7000kPa outlet and 38500kPa inlet

(other specs are available on request)

Model 3500
This speciality designed Regulator provides huge flows from
cylinders and manifold gas supply systems. (Oxygen max
inlet 240 Bar)

Features include - Wt. 2.5kg

4Designed to operate on HP Cylinders of up to 385 bar
4Additional high capacity 3/8” NPT outlet
4Forged brass body and bonnet
4Self seating internal safety relief valve
4Meets CGA E-4 Standard for Gas Pressure Regulators

3500
3003541 Nitrogen 4200kPa (Ideal for motor racing)
16
www.harrisproductsgroup.com.au
 Hospitality Regulators
Model 601 R
e
Many regulators on the market are Oxygen regulators relabelled g
for Helium. Harris engineered this regulator for the specific task of
balloon filling with Helium.
u
Helium is a very light gas that is expensive and has its own safety l
considerations. This regulator captures these issues and provides a a
better proposition for the user. t
o
Features Include- Wt. 0.8kg
r
4Forged brass body and bonnet
4High pressure Helium capsule seat
s
601Z005 4Internal safety devise on diaphragm
4Fixed pressure preset at 30 psi-kPa
4Spring loaded tilt valve (leak proof seal when off)

Model 601 Regulator Made

in
Designed for beer dispensing that does not require highflow e.g.
Homebrew/Party hire. The application is often used in small
Europe
rooms which can lead to a dangerous environment.
Harris believed that reducing gas leaks was a major concern in
the development of this regulator, and designed a regulator with
special threads and safety seals.

Features include - Wt. 0.8kg

4Metal case gauges
4Made by Harris to ISO 9002
4Brass body & bonnet
4Smooth adjustment 0-400kPa 601Z017
4Internal self reseating safety relief valve
4Special threads/seating to reduce risks of leaks

Model 801
Our 801Z378 is designed with a special C02 compatible
capsule seat surrounded by a filter and is ideal for
connecting to a cylinder, or as part of a regulator board.

Features include - Wt. 0.8kg

4Large easy to read gauge
4Complies to AS4267
4Harris engineering and quality
4Internal self reseating tamper proof SRV fitted
4Inlet & outlet 1/4” NPT female
801Z378
4Preset 800kPa

17
www.harrisproductsgroup.com.au
 Hospitality Regulators
R
e Model 802
g
u Designed for C02 delivery for bars, pubs, wine bars and the
servicing of beer or soft drink. It is also suitable for C02/Nit.
l mixtures, with a max inlet of 7000kPa.
a
t Features include - Wt. 1.3kg
o 4Excellent flow
r 4Outlet 0-400kPa or 0-800kPa
s 4Forged brass body
4Standard Harris parts
4Safety relief with the ability to manually clean
4Outlet with special built-in ball type reverse flow valve,
to avoid internal liquid contamination
4Safety pressure gauges calibrated in kPa with metal case
4Lock nut on pressure adjustment
4Inlet at 3 O’clock
4Ability to manifold up to three (3) regulators from one cylinder

802R400CD Single C02 Regulator (beer)

802R800CD Single C02 Regulator (post mix)
802R400CD/2 Two C02 Regulators
802R800CD/2 Two C02 Regulators
802R400CD/3 Three C02 Regulators
38A957 Special Outlet Fitting Brass

Model 821
This model regulator has been developed with input from the
Industry. Its features are excellent.

Features include- Wt. 1.3kg

Made 4Proven capsule seat design
in 4Large 63mm, easy to read, safety back gauge with
safety seal
Europe 4Internal, self reseating, tamper proof safety relief valve
4Smooth 0-400kPa adjustment
4Accurate regulation
4Easy to repair/Clean

821Z029 CO2 0-400kPa, rear inlet, capsule seat, two filters

821Z035 CO2(T30 Inlet) 0-400kPa, rear inlet, capsule seat,

twin gauge, two filters, cylinder regulator

821Z041 Nitrogen (T50 Inlet) 0-400kPa, rear inlet, capsule

seat, twin gauge, two filters, cylinder regulator

18
www.harrisproductsgroup.com.au
 Hospitality Regulators
R
Model 847 e
g
A very exciting product with many unique features. u
The performance of this regulator will provide an improved
beer distribution system for the Hospitality Industry.
l
a
Features include - Wt. 1.5kg t
4Very large diaphragm o
4Large flows; 32m3 hr, at 500kPa inlet r
4Smooth accurate pressure adjustment s
4Large 63mm dia., easy to read gauge
4Forged high quality brass body
4Suit C02 Pipeline or cylinder pressure **
4Built in, tamper proof, self reseating safety relief valve
4Sav T’ Lock; adjustment by special Key (A825ES).
847DT400CD This puts control back into the hands of the right
person. Set ‘N’ Forget!
4Reduces surge when opening beer tap

Made 847DT400CD C02 Rear Inlet 0-00kpa

in
Europe A825ES
847DT800CD C02 Rear Inlet 0-800kpa

Model 847
This multistage cylinder Regulator is ideal for high flow
applications where constant pressure is also required.

Features include - Wt. 1.3kg

4 Proven seat design
4 Easy connection
4 Complete package
8474X-S 4 Large, easy to read gauges
4 Anti-surge feature
4 Complies to AS 4840, AS 4267 & AS 5034
4 Fixing the wire to a wall prevents
regulator falling and being damaged
4 Includes safety relief valve protection
4 Non return valve protection included

New “DR” SRV replaces
SRV as shown in photo

19
www.harrisproductsgroup.com.au
 Hospitality Accessories
H
o
s
Quick fit hand wheel
p connection + HP NRV +
i High pressure anti kink/
t anti whip hose + C02
connection
a
l C02-ASS-1.2
i
t
y
Brumby tap with 4”
extension. Ideal for fridge
410851 connection

410855
Liquid beer line with fittings 2.5 Metres

EK tap with 3” extension.

Ideal for fridge or bar
410852 connection

410856
CO2 gas hose with connections, 2 metres

410853-Chrome
410853-SS
410857
Beer gun tap available in
Splash back beer tray in Stainless
Chrome or Stainless Steel.
Steel 15cm x 15cm
Ideal for portable systems

20
www.harrisproductsgroup.com.au
 Medical
R Model 801 Medical M
e A compact, single stage regulator, which delivers a high level of e
g accuracy needed in this application. The features are world class d
u and compliment other products in this range.
i
l Features include - Wt. 1.3kg c
a 4 Pressure gauges are fully chromed, steel cased 53mm dia. a
t easy to read and colour coded. A precision mechanism for l
o accuracy, safety back, and a one-piece virtual unbreakable
r polycarbonate lens. This ensures maximum strength, quality
s and durability

4 Inlet connection to suit Australian Standards. With a filter,

in Yoke/Bullnose, plus another filter surrounding the capsule
seat

4 Outlet connection complies with Australian Standards

801Z259 AS 2472-1996
Made
4 Body machined from forged brass for maximum strength and
in durability
Europe
4 Heavy chrome plating for sanitation and appearance

4 Proven encapsulated seat design for maximum accuracy,

reliability and longlife

4 Self reseating external safety relief valve included

4 Complies to AS 2472-1996, AS 3840.1-1998 ISO 9002,

ISO 14001.

801Z260 801Z258 Preset Nitrous Oxide with Yoke

801Z259 Preset Air reg with Yoke

801Z260 Preset Oxygen reg with Yoke

Y01870 Oxy Yoke

Y01910 Nitrous Oxide Yoke

Y01940 CO2 Yoke

Y01950 Air Yoke

21
www.harrisproductsgroup.com.au
 Medical Flow
M Medical Flowmeters
e
d Harris Flowmeters feature an integrated one-piece design with well defined
calibrations which accurately measure flow.
i
c Features include - Wt. 0.4kg
a 4 Precision engineered
l 4 Pressure compensated design accurately measures flow
4 Soft seating valve to ensure on/off function
4 Easy to read
4 Scratch resistant
4 Virtually unbreakable transparent cover tube
4 Handwheel grip is designed to be easily operated with gloves
4 Colour coded handwheel
4 Complies to AS 3840.1-1998

86615LOX Oxygen flowmeter 0-15LPM

86515LAIR Air flowmeter 0-15LPM

86615LOX

Model 1500
The model 1500 is an oxygen regulator designed for the home healthcare, hospital and pediatric
application.

Features include - Wt. 360grams

4 Lightweight aluminium body with brass internal components
4 Precise dial-in flow control
4 Permanent laser etch markings
4 Sintered inlet filter for safety and regulator life
4 Barb outlet
4 1.4” diameter gauge with protective boot
4 Conforms to CGA E8 and ASTMG175

3500339 0-8LPM with Yoke inlet and Barb outlet

ranges: .5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8

3500340 0-8LPM with Bull Nose and Barb outlet ranges as above Made
3500343 0-15LPM with Yoke inlet and Barb outlet
in
ranges: .5, 1, 1.5, 2, 3, 4, 6, 8, 10, 15 USA
3500347 0-1LPM Pediatric Yoke inlet and Barb outlet
ranges: 1/32, 1/16, 1/8, 1/4, 3/8, 1/2, 5/8, 3/5, 7/8, 1

4309618 Electronic oxygen conserving device which saves gas (up to 7:1 ratio) by not delivering
during the latter part of inhalation. No photo available at time of printing

4309619 Single Lumen tubing

4309633 Supply tubing, 7ft

22
www.harrisproductsgroup.com.au
 Hand Cutting Torches

142033 Model 142 C

u
A traditional one piece cutting torch that has become an t
industry standard. Be aware of low quality copies that don’t t
comply to ISO standards, ask for Harris original.

Features include- Wt. 1.9kg

T
4Top mounted stainless steel cutting lever with o
hold-down button r
4 Solid brass head/body/handle c
4 Ease on for heavy cuts/piercing h
4 Universal pressure mixing, fuel gas 1.5kPa
4 Well balanced
4 Accepts flat seating tips, reducing head popping
4 Complete with flash-guards

142033 1 pce Hand Cutt Torch

Propane, LPG, Natural Gas
Made Cuts up to 200mm
in Ideal - Engineering shops,
Europe Mines, Maintenance shops
Includes Flashguards

Z142037 1 pce Hand Cutt Torch Acet

Cuts up to 200mm
Ideal - Engineering shops, Mines,
Maintenance shops
Includes Flashguards

Z142038 Our popular 142 Torch with the

Z142038 head manufactured to suit
tapered seating tips. Suitable for
any fuel gas
Note: Not universal mixing

NOTE: 1) All Propane Torches 624FL & 142F also operate

on L.P.G. and Natural Gas.

2) With Propane Torches, Heating Tips up to

Size 3 (H623P) can be screwed onto a Torch.
Meaning you can cut, gouge and heat just by
changing the Tip.

3) All Torches are fitted with Flashguards to

enhance safety and add value.

Note: Harris type 41 and 44 tips are available refer price list.
23
www.harrisproductsgroup.com.au
 Hand Cutting Torches
C
u Model 625
t
t Features include- Wt. 1.5kg
4Finger control stainless steel cutting lever
T 4Solid brass head/body/handle
4Well balanced for easy piercing/heavy cutting
o 062Z084 4Universal pressure mixing, fuel gas 1.5kPa
r 4Accepts flat seating tips - reduces head popping.
c 4Complete with flashguards
h 4Ease on cutting Oxygen makes piercing/starting easier

062Z019 1 pce Hand Cutt Torch Acet

Cuts up to 300mm
Ideal - Engineering shops
Includes Flashguards

062Z084 1 pce Hand Cutt Torch Propane,

LPG, Natural Gas
Cuts up to 300mm
Made Ideal - Engineering shops,
in Scrap cutting
Includes Flashguards
Europe
062Z088 1 pce Hand Cutt Torch Propane
Cuts up to 300mm - 90o Head
1000mm length
Ideal - Cutting in hard to
reach places, Scrap cutting
Includes Flashguards Wt. 1.9kg

062Z066 1 pce Hand Cutt Torch Propane

Cuts up to 300mm - 180o Head
1000mm length
Ideal - Where there is a need
for the tip to be straight out of the torch.
Includes Flashguards Wt. 1.9kg

062Z106 90o Head x 1250mm

062Z107 90o Head x 1500mm
062Z109 90o Head x 2000mm

This torch is designed to aid an operator

cutting “out of position”. The under-hung
lever allows an operator to easily hold the
torch and operate the cutting process.

No tired thumbs!
24
www.harrisproductsgroup.com.au
 Machine Cutting Torches
C
Oxy/Propane/LPG/Natural Gas u
t
The Harris range of machine cutting torches offers the ultimate in gas t
mixing, performance, ease of adjustment and safety desired by the profile
industry. Various diameters, lengths etc. are available to allow low cost T
updating/retrofitting of machines. For further advise or training contact
o
Harris.
r
c
Z198028 Torches are available in the following lengths; 65/110/250/460mm. h
Most are supplied with individual valves (per gas) and are in diameters
of 30/32/35.

2 hose design torches are available to suit straight line cutting machines
refer to Harris for details.

A special torch has been designed to fit the square barrel of some profile
machines. Refer to picture Z198028

NOTE: 1) All Torches are three tube design; needed for high speed
Z198050 Tips.

2) Torch length can be altered. Charges apply.

3) Check Harris stock holdings before ordering.

4) Refer to Harris Price List for Part No, description and size
Made
in
Europe
Machine Cutting Accessories
Model BV-98-2 Model S-98-C Model TH-98
Bevelling Head Adjustable Tip Adaptor Adjustable Twin Tip Holder
Increases speed of quality bevel cuts. Adjust tip to any angle without For making two cuts simultaneously
Preheat tip swivels for either left or right moving the torches (cutting tip with one torch. Adjusts from 1 1/2”
travel. Equipped with 1390-3H heating not included). to 12” width.
tip. Use with natural gas or propane
(cutting tip not included)

25
www.harrisproductsgroup.com.au
 Contractors Equipment - Oxy Acetylene
S
c
h
e
m
a
t 1-8
i
c

1-8

Contractors Equipment - Oxy Propane

2N-8N

3N-10N

26
www.harrisproductsgroup.com.au
 Professional Equipment - Oxy Acetylene
S
c
h
e
m
a
t
i
or 632 c

1-8

Professional Equipment - Oxy Propane

or 632

2N-8N

3N-10N

27
www.harrisproductsgroup.com.au
 Straight Line Cutting Machine
C
u
The Harris straight line can be used for flame and plasma
t cutting. Included with every machine is a quick acting
t manifold which eliminates the need to reset the torch when
flame cutting. The machine is compact, lightweight and has
M a convenient carry handle. The Harris cutting torch and tip is
renowned for smooth and fast cutting.
a
c
h Features include -
i 4 Positive rack and pinion drive
n 4 Wide speed range (127-2540mm/min)
e 4 Dynamic brake
4 Convenient carry handle
4 Harris torch and tip
4 Twin cutter
4 Manifold
4 Heavy duty rail (8’)
4 Quick set up

Technical Data
4 Power requirements 240v
OHIO. USA.
4 Speed variable 127-2540mm/min
4 Load capacity (6.8kg) Vertical
(27.3kg) Horizontal
4 Magnet holding capacity
(68kg) per assembly
4 Tool Kit

Adjustable twin tip holder

Made ideal for making two cuts
in simultaneously.
Europe

Other types/models
are available contact
Harris On/Off magnets for easy set
up and positive positioning on
magnetic material i.e. steel.

28
www.harrisproductsgroup.com.au
 Cutting Attachments
C Model 362 LIGHT/MEDIUM DUTY
A well designed robust attachment with outstanding cutting C
u capacity of 75mm. Sets the standard for smaller torch use. u
t t
t 362 Features include- Wt. 0.4kg
t
4 Head/body in solid forged brass
A 4 Triangular stainless steel gas tubes for maximum strength
and safety
A
t 4 Equal pressure mixing t
t 4 Solid brass lever with stainless steel plunger t
4 Unique tapered ‘O’ ring sealing for safety
4 Suits all gases

362 Contractors Cutt Att. Acetylene/Propane. To suit

Harris Handle 019038
Note: Tip nut is 9008437
AVAILABLE
IN POP Model 733/493F HEAVY DUTY
HANG A truly professional cutting attachment suited for the
SELL toughest workshop conditions. Its many features are
493F
unmatched by other manufacturers.

Features include- Wt. 0.8kg

4 Triangular stainless steel gas tubes for maximum strength,
safety and operator comfort
4 Tapered ‘O’ ring sealing for longlife/safety
4 Accessible injector allows simple change - over to other gases
4 Cuts to 150mm
4 Accepts flat seating tips, greatly reducing head popping
4 Positive pressure mixing. Fuel gas 40kPa (733)
4 Universal pressure mixing. Fuel gas 1.5kPa (493F)
4 Head, lever, body solid brass for long life
4 Ease-on built in for better starts and piercing
733
493F Professional Cutt Att. Propane, LPG, Natural Gas to
suit Harris original Handle 632, 043013
Note: Tip nut to suit both is 6259B

733 Part of the classic series, medium pressure Acetylene

cutting attachment. The tough solid construction
surpasses others in the market. Cuts to 100mm.

Made
in Spare parts are
Europe available for all

products
29
www.harrisproductsgroup.com.au
 Cutting Attachments
C Follows the design of the professional (493F) cutting attachment
u specs, and is made to be compatible with other brands.
t The compatible range is easily identified. The tightening sleeve
is machined differently to the 493F (refer P29).
t
Features include- Wt. 0.8kg
A 4 Triangular stainless steel gas tubes for maximum
t strength and safety
t 4 Slide ‘O’ ring sealing makes it compatible
4 Accessible injector allows simple change over to
other gases.
4 Accepts flat seating tips, greatly reducing head popping.
4 Built in safety plug in head
4 Universal mixing for maximum economy, fuel gas 1.5kPa
4 Head, lever, body solid brass construction for long life
4 Cuts to150mm.
Made 4 Ease-on built in for better starts and piercing
in
Europe I492FHC
I492FHC * Professional Cutt Att. Propane, LPG, Natural
Gas to suit Harris “Compatible” Handle and other
manufacturers.
AVAILABLE
IN POP
HANG I492HC * Professional Cutt Att. Acetylene, to suit Harris
SELL Handle (I432HC). Fits most makes of
Handles.”Compatible”

6259B Tip nut

The 733HC is an expansion of the above Professional range and

is considered the toughest in the market:
Simply
the Best Features include- Wt. 0.8kg
4 Triangular stainless steel gas tubes
4 Solid brass head
4 Accepts standard taper seating tips
4 Solid brass body
4 Solid brass lever
4 One mixer for all fuel gases
4 Compatible with other manufacturers
733HC 4 Made in Europe
4 Ease-on built in for better starts and piercing

9005218 Tip nut to suit

Note: Harris type 41 and 44 tips are available refer price list.
30
www.harrisproductsgroup.com.au
 Handles
H Model 19-6 H
a This lightweight, all metal handle is ideal for the handyman, a
n plumber, panel beater and the like.
n
d d
l Features include- Wt. 0.8kg
l
e 4 Front mounted valves for fast flame adjustment with the
ability to change flame one handed, by using thumb e
s 4 Two separate stainless steel gas tubes s
019038 4 Front/rear pieces of forged brass
4 Good flow for lightweight handle
4 Complete with flashguards
Made
in
Europe Model 50-10
The Harris automatic torch handles feature a unique gas
control to reduce operating costs and improve safety and
convenience. The thumb operated on/off gas control
and adjustable pilot light eliminate relighting and flame
readjustment each time the torch is used. An alternative
set-up is the on/off feature which enables the torch to function
as a dead man switch, a fantastic safety feature for the
operator. Ideal for brazing with Oxy-LPG gas.

Features include- Wt. 0.4kg

050008
4Automatic on/off gas control
4Adjustable pilot light
4Can be set-up with a deadman switch
4High or low flame flick of a lever
AVAILABLE
4Complete with flashguards
IN POP
HANG
SELL
Model 43-2
Professional handle with Harris original stainless steel
head, supplying extra high flow required for large heating
applications. Its toughness and design will add another
dimension to safety in the workshop.

Features include- Wt. 0.7kg

4Tough extruded brass handle
4Tube within a tube for high flow
4Stainless steel connector for long life
4No screws or soldered joints for easy maintenance
4Unique tapered ‘O’ ring sealing for extra safety
043013 4Large flow valves
4Stainless steel ball valves
4Flashguards included
4Designed for right or left hand use
4Fuel gas valve easily reached for emergency shut down

31
www.harrisproductsgroup.com.au
 Handles
H Compatible Model 632 H
a This Classic series 632 Handle is designed for normal a
n workshop use. It operates heating tips up to a size 3, which n
d
will suit most applications. The handle comes in two d
l
Configurations - Compatible
- Harris Original
l
e e
s s
632HC Features include- Wt. 1.0kg
4Tough extruded brass handle
4Brass connector
4Slide ‘O’ ring fitment (compatible 632HC)
4Tapered ‘O’ ring seal (original 632)
4S.S. ball valves
4Flashguards included
4Comfortable
4Made for right hand or left hand use
4Fuel gas valve easily accessible in the event of a flashback

632

Acetylene Mixers
AVAILABLE Mixing the gas is very important to the flame. Harris is proud
IN POP of its range and the many uses, via tips and adaptors, that are
available. Note: The mixers and tip thread, only accept Harris
HANG tips, which are designed to give the best in gas sealing and
SELL safety.

H192E Precision Equal Pressure Acetylene Mixer for

Made 5090, 1390, 0090 Tips & J63 2 Heating Tip
in
Europe E43 Professional Equal Pressure
Acetylene Mixer for 23A90 0-10,1390 0-10, 0090
1,3,5,6,8 Tips and J63 2 Heating Tip

E43HC Professional Equal Pressure

Acetylene Mixer for 23A90 0-10,
1390 0-10, 0090 1,3,5,6,8 Tips and J63 2 Heating
Tip. Compatible range fits most brands of Handles.

E243 Professional Equal Pressure

Acetylene Mixer for 23A90 13, 15 &
J633/J634 Heating Tips

E343 Professional Equal Pressure

Acetylene Mixer for J143-5 Heating Tip

32
www.harrisproductsgroup.com.au
 Propane Mixers
P Accurate mixing is vital for a good flame with these P
r fuel gases. If possible, use the mixer for the tip r
o range to achieve the best flame characteristics. The
o
p Harris range is truly world class and will open up
p
applications for the end user, making for an easier,
a safer workplace. a
n n
e AVAILABLE e
IN POP Propane, LPG, Natural Gas
M HANG M
x SELL H192S Precision Universal Pressure Mixer for
i
1390N, 1390 H, 0090 Tips*
x
B191 Precision Universal Pressure Mixer for
1390 00N-2N, 0090 2N Tips. Gives
precise mixing, and better flame for these
Tip sizes*

B193 Precision Universal Pressure

Mixer for 1390 4N-10N, 1390 H,
4N,6N,8N. Gives precise mixing and
better flame for these Tip sizes*

B433 Professional Universal Pressure

Mixer for 1390 00-3N, 0090 2N Gives
Precise mixing, and better flame*

B435 Professional Universal Pressure

Mixer for 1390 4N-7N, 0090 4N, 6N.
Gives precise mixing, and better flame*

B438 Professional Universal Pressure

Mixer for 1390 8N-10N

NOTE: Use B435 as a general purpose mixer,

all sizes. Flame mixing not as precise as
the correct size matched with tip. * See
above - will still operate on other sizes.

B43N Professional Universal Pressure

Mixer for Oxy/Natural Gas, using large
volume 2290 1H-3H Oxy/Propane Tips.

Made
Fits 043013, 632

in
F43 Professional Mixer for heating, using large
volume 2290 1H-5H Propane Tips.

Europe
Fits 043013, 632

33
www.harrisproductsgroup.com.au
 Cutting Tips
C Oxy/Acetylene O
u x
t These two piece tips are very popular. Their flame y
t characteristics, plus the ease of cleaning, make them /
i ideal for Plumbers, Panel Beaters and other Contractors.
A
n c
g To suit 362 Cutting Att. t
Size Precision Series
3690 00AC Cuts 0-6mm Steel
T M
i 3690 OAC Cuts 6-13mm Steel x
p
s 3690 1AC

Cuts 13-25mm Steel

3690 2AC Cuts 25-75mm Steel

AVAILABLE
IN POP
HANG
Oxy/Acetylene
SELL This Professional tip offers exceptionally quick starting
for the operator. Combined with the ability to pull apart for
cleaning. The flat seating allows easy reseating on-site
with a rub with wet/dry - a very unique product.
This flat seating tip greatly reduces the occurrence of
tip popping. Precise gas flutes control the amount of gas
being used.

To suit 492 Cutt.Att., 142 & 624L Torches

Made Size Professional Series
in 6290 000 Cuts 0-5mm Steel (One pce copper)
Europe
00AC Cuts 5-10mm Steel

0AC Cuts 10-15mm Steel

1AC Cuts 15-25mm Steel

2AC Cuts 25-50mm Steel

3AC Cuts 50-100mm Steel

4AC Cuts 100-175mm Steel

5AC Cuts 175-250mm Steel

6AC Cuts 250-300mm Steel

NOTE: Standard 5mm Hose does limit good
cutting to 100mm. For thicker steel, use larger diameter Hose.

34
www.harrisproductsgroup.com.au
 Cutting Tips
C Oxy/Propane/LPG/Natural Gas C
u u
t Opens up avenues for the Contractor who is using t
t
LPG/Propane as his fuel gas. A high performance product, t
which will give quick starts and quality cutting. i
To suit 362 Cutting Attachment n
T Size Precision g
i 3690 00P Cuts 0-6mm Steel
p
T
s 3690 0P

Cuts 6-13mm Steel
i
3690 1P Cuts 13-25mm Steel p

3690 2P Cuts 25-75mm Steel
s

Professional Oxy/Propane/LPG
The design of these Tips is superb and adds a new dimension
AVAILABLE to cutting, using Oxy/ LPG, Propane, Natural Gas. Develops
IN POP very quick starts and also precise control over the amount
HANG of gas used. Every Tip is flame is tested before leaving the
SELL factory.
To suit I492FHC, 492F Cutt. Att., 142F & 624FL.
Size Professional
000NX Cuts 0- 5mm Steel

00NX Cuts 5-10mm Steel

0NX Cuts 10-15mm Steel

1NX Cuts 15-25mm Steel

2NX Cuts 25-50mm Steel

3NX Cuts 50-75mm Steel

4NX Cuts 75-150mm Steel

5NX Cuts 150-200mm Steel

6NX Cuts 200-300mm Steel

Professional Oxy/Natural Gas

NFF Cutting tips specially designed for Natural gas use.
Made Providing extra heat in the start up process.

in
1NFF 15-25mm
2NFF 25-50mm

Europe 3NFF 50-75mm

4NFF 75-150mm
5NFF 150-200mm
6NFF 200-300mm
35
www.harrisproductsgroup.com.au
 Heating Tips
Oxy/Acetylene
H Heating with Oxy /Acet is used in industry in many H
e
different applications. When using the J633 and
above, that procedures and methods become critical.
e
a Contact Harris for advise. a
t We believe our heating tips are the hottest in the industry. t
i Size
n J63 2 Multi Flame Heating T
g J63
J63
3
4
Multi Flame Heating
Multi Flame Heating
i
J143 5 Multi Flame Heating p
T s
i NOTE: 1) Tip is silver soldered to stainless steel Tip Tube.
p
2)
Comes as a complete item (J633 & J634, J1435).
Size 2 (copper) suits E43 Mixers.
s 3) Sizes 3 & 4 (as shown in photo) suit E243 Mixer only.
Made J633 4) J632 can be fitted to H192E Mixer by using 190111 Adaptor.
in 5) J633,4 will cause some problems with 5mm hose - (restricts
flow). Suggest 8/10mm hose and manifold Acetylene cylinders.
Europe 6) J1435 requires 10mm Hose and manifold Acetylene cylinders.

Professional Oxy/Propane
The shape, performance, and characteristics of the flame are
effected/controlled in some way by the tip. Harris tips are
designed and manufactured to give the very best flame. Our
quality is assured, as every tip is flame tested.

Size
2290 1H Multi Flame Oxy/Propane Heating Tip
2290 2H Multi Flame Oxy/Propane Heating Tip
2290 3H Multi Flame Oxy/Propane Heating Tip
2290 4H Multi Flame Oxy/Propane Heating Tip
2290 5H Multi Flame Oxy/Propane Heating Tip


NOTE: 1) Tip Tube 2393 is needed, as well as the correct
Mixer - F43 Propane/LPG, B43N Natural Gas.
2) Standard 5mm Hose limits size to 2290 1H, 2H, 3H.
3) Enormous heat is available with the above range of
Tips.
Size
H62 1P Heating Tip
NOTE: 1) Can attach to
H62 2P Heating Tip
Professional Cutt Att. and
H62 3P Heating Tip Hand Cutting Torches.


23573 Nipple - Use with 2393 Tip Tube before fitting
heating Tip for protection of the threads

23579 Adapts 2290 Heating Tips to Competitors S/S Tip Tubes

36
www.harrisproductsgroup.com.au
 Tip Tubes
T T
i i
Range, gas sealing and construction help to make these
p products an ideal addition to the safe use of gas equipment. p
T T
u D50C Designed for Precision Handle
u
b Fits H192E, H192S, B191,
B193 Mixers plus 1390 Tips. b
e e
s 8593 Designed for Professional
Fits E43, E43HC, B433,B436, s
B438 Mixers plus 1390 Tips.

23932F Stainless Steel - 710mm

23933F Stainless Steel - 380mm

23935F Stainless Steel Straight 1040mm

NOTE: 23933F is the most popular size.

Welding, Brazing Tips

Made
in Oxygen Acetylene
DS

Europe
EN
TB

Size Precision or Professional

HA

0090 1 Flexible Welding/Brazing

DT

EN
E
TH

0090 3 Flexible Welding/Brazing

0090 5 Flexible Welding/Brazing

0090 6 Flexible Welding/Brazing

0090 8 Flexible Welding/Brazing

NOTE: To suit H192E Mixer. Precision Series. Adaptor

430111 needed for E43, E43HC Mixers, Professional Series.

37
www.harrisproductsgroup.com.au
 Welding, Brazing Tips
Size Precision
H 5090 1 Copper Swaged Welding/Brazing T
e
i
a 5090 3 Copper Swaged Welding/Brazing p
t
T
T 5090 5

Copper Swaged Welding/Brazing
u
i b
p 5090 6 Copper Swaged Welding/Brazing e
s s
The size of the thread 5090 8 Copper Swaged Welding/Brazing
is the main difference
between the 5090 and
NOTE: 1) To suit H192E Mixer. Part of Precision Series.
23A90 series
2) Common sizes shown. Smaller sizes are available
starting at 00 (ie Jewellery use).

3) Presicion is also know as Craftsman/Contractors

when in kit form.

Made
in
Europe 23A90 1
Size Classic/Professional
Copper Swaged Welding/Brazing

23A90 3 Copper Swaged Welding/Brazing

23A90 5 Copper Swaged Welding/Brazing

23A90 6 Copper Swaged Welding/Brazing

23A90 8 Copper Swaged Welding/Brazing

23A90 10 Copper Swaged Welding/Brazing

NOTE: 1) To suit E43, E43HC Mixers. Part of

Professional Series.

2) Shown are the most popular sizes.

Other sizes (up to 23A90 15) are
available on request and subject to stock
holdings.

38
www.harrisproductsgroup.com.au
 Brazing Heating Tips
H H
e e
a a
t DS
t
T T
EN
TB

i i
HA

p Brazing, Heating Tips p

T

s
ND

s
Oxygen/Propane/LPG/Natural Gas
EE
TH

The shape, performance and characteristics of the flame are

affected/controlled in some way by the tip. Harris tips are
designed and manufactured to give the very best flame with every
tip flame tested to ensure quality and consistency.

Size Precision or Professional

0090 2N Flexible Brazing Tip

0090 4N Flexible Brazing Tip

0090 6N Flexible Brazing Tip

0090 8N Flexible Brazing Tip

TH119 Twin Tip Holder - Ideal for 0090 Flexible

NOTE: To suit H192S, B191, B193 Mixer
Adaptor 430111 needed to suit B433, B436, B438 Mixer

Size Precision or Professional

1390 3N Screw-in Brazing

1390 5N Screw-in Brazing

1390 6N Screw-in Brazing

1390 8N Screw-in Brazing

1390 10N Screw-in Brazing

Made
in
Europe

39
www.harrisproductsgroup.com.au
 Gouging Tips
This range of Gouging Tips gives the end user terrific
G scope for repair or weld preparation. The quick starting G
o and speed is a real feature of the design. It is often said o
u “The better the flame the better and easier the job”. u
g Never truer than with these tips. g
e
Oxy/Acetylene T
T To suit 492 Cutt. Att., 142& 623Torches i
i OXY/ACET p
p Size Precision or Professional s
s 1G Gouging 3 x 6mm

2G Gouging 5 x 10mm

3G Gouging 6 x 13mm

Oxy/Propane/LPG/Natural Gas
To suit I492FHC, 492F Cutt. Att., 142&
623FLTorches
Size Precision or Professional
1GG Gouging 3 x 6mm

2GG Gouging 5 x 10mm

3GG Gouging 6 x 13mm

OXY/LPG
Super Hi speed M. C. Tips
Acetylene
Made
in Hi speed Acetylene machine cutting tips specifically designed
to enhance profile cutting with Acetylene. Flat seating for less
Europe tip popping and ease of re-seating.
Cutting steel quickly is the aim in profile cutting. The quality
of the flame is a major factor in the process. Harris engineers
spend considerable energy in perfecting flame shape, resulting
in higher speeds, quality cutting and reduced gas costs.

Size
1VAX Acetylene Hi-Speed Cuts 0 - 8mm
2VAX Acetylene Hi-Speed Cuts 8 - 15mm
3VAX Acetylene Hi-Speed Cuts 15 - 35mm
4VAX Acetylene Hi-Speed Cuts 35 - 75mm
5VAX Acetylene Hi-Speed Cuts 75 - 150mm
VAX 6VAX Acetylene Hi-Speed Cuts 150 - 200mm

40
www.harrisproductsgroup.com.au
 Super Hi speed M. C. Tips
G Propane, LPG, Natural Gas
M
o The Harris tip has become accepted world wide as “The Tip” for /
u profile machine cutting. Flame shape, gas consumption, flame C
g consistency and flat seating make this range an ideal choice for u
e any business.
t
Size t
T 5/0VVC Hi-Speed Cuts 0 - 4mm
i T
p 4/0VVC Hi-Speed Cuts 4 - 6mm
i
s
p
3/0VVC Hi-Speed Cuts 6 - 9mm
s
2/0VVC Hi-Speed Cuts 9 - 12.5mm

NOTE: The sizing of the above Tips is expressed in this manner
rather than showing them as - eg. 6290-00000VVC.
Tip and box only display size.
Made
in
Europe Size
0VVC Hi-Speed Cuts 12.5 - 20mm

0.5VVC Hi-Speed Cuts 20 - 35mm

1VVC Hi-Speed Cuts 35 - 60mm

1.5VVC Hi-Speed Cuts 60 - 75mm

TRAINING 2VVC

2.5VVC
Hi-Speed Cuts 75 - 125mm

Hi-Speed Cuts 125 - 150mm

Harris can conduct a professional,

structured, profile cutting training
3VVC Hi-Speed Cuts 150 - 175mm
course which will improve
4VVC Hi-Speed Cuts 175 - 200mm
4Quality
5VVC Hi-Speed Cuts 200 - 225mm
4Increase Speed

4Lower Operation Costs 5.5VVC Hi-Speed Cuts 225 - 250mm
4Increase Staff Morale
Heavy Duty
For further details contact your “local”
6NH Heavy Duty Cuts 250 - 275mm
Harris Distributor
7NH Heavy Duty Cuts 275 - 300mm

8NH Heavy Duty Cuts 300-380mm

41
www.harrisproductsgroup.com.au
 Specialty Tips
S S
p p
e These Tips have many uses and are an added benefit to e
the Harris Range. For many end users, rivet cutting, used for
c cutting brackets from bulkheads; rivet washing for a straight
c
gouging tip, etc can enhance the use of the torch as a tool.
T Our 8” long Tips, are ideal in hard to reach places or in Profile T
i machines cutting ‘H’ Beams. i
p p
s s
To suit Professional Series
Size Professional Series
6290 NFW Rivet Washing

6290 2NFFR Propane Rivet Cutting

6290 R Acetylene Rivet Cutting
1501051 Professional Size 4NFFL 8” long Tip
Made
1501053 Professional Size 2NFFL 8” long Tip
in
Europe

Flashguards

Flashguards screw onto Flashguards/Checkvalves/Non-Return Valves

the end of a handle/
blowpipe/torch 886AL1 Fuel Gas 5/8” Inlet/Outlet suitstandard
Australian Torches - all makes
886AR1 Oxy Gas 5/8” Inlet/Outlet
Suit standard Australian Torches - all makes
886AL Fuel Gas 5/8” Hose End 9/16”
Suit 432, 623, 142, 196.

886AR Oxy Gas 5/8” Hose End 9/16”

Shown attached to a handle Suit 432, 623, 142, 196.

C98V2 Oxy Hi Flow valve for cutting

Oxy on Machine Cutting Torches

42
www.harrisproductsgroup.com.au
 Flashback Arrestors
Flashback arrestors are an important product in making the
F operator and industry a much safer workplace. Combine this F
l product with Flashguards, (on Torches) and FBA on Regulators
and you raise the level of safety to world standards. l
a 188GGAR Torch end Oxygen normal flow*
a
s s
188GGAL Torch end fuel gas normal flow
h h
1882UAAR Torch end (off set) Oxygen high flow

A 1882UAAL

Torch end (off set) fuel gas high flow*
Shown in Photo
A
r r
188TAR Oxygen regulator end normal flow
r r
188TAL Fuel gas regulator end normal flow*
1882TAR Oxygen regulator end high flow
1882TAL Fuel gas regulator end high flow*
Made R-FBA-PAK Two reg and FBA in hanging display pack
in T-FBA-FBA Two torch and FBA in hanging display pack
Europe
SAFETYPAK 1 Two Reg end FBA plus two Torch end flashguards to
fit torches with standard 5/8” threads this is the minimum requirement
for the AS 4839-2001

SAFETYPAK 4 Two Reg end FBA plus two Torch end FBA this is
the optimal requirement for the AS 4839-2001

NOTE: * Normal flow/use ** Bigger flow - ideal for

large flow Heating Tips. Both regulator types
are fitted with a unique thermal cut-off valve.

Manifold flashback arrestors are available.

Please provide details of the applications so that
the right product can be quoted.

Circle Cutting Guides

I696 Twin Wheels and Circle Bar.
I697 Twin Wheels and Circle Angle cutts 45o, Torches/Cutt.Att. 624,
Bars twin for 362, Cutt. Att. and 624FL, 142, I492HC, 492, 492F and
3690 tips. 6290 Tips.

IR693B Twin Wheels and Inside/Outside

Circle Bar. Torches/Cutt.Att. 624L, 624FL, 142,
I492HC, 492, 492F and 6290 Tips.
IR693B-HC to suit 733HC

43
www.harrisproductsgroup.com.au
 Specialty Torches and Tips
S
p
S Model 89-3 Compressed Air/Propane Torch Ae
p This Torch has a built-in Pilot Flame which can be dc
e adjusted to small for economy, or increased to a full a
c flame. Can also be set up as a deadman shut-off lever
pT
for added safety. Tip can be swivelled in any direction. Ideal
HC1892 for soft soldering, preheating castings, mould drying, burning to
T paint, heating for the hard surfacing process, annealing copper or
o tubing, and many other heating applications. rc
r sh
c Made HC1892 Heating Torch complete with

h in Stainless Steel Tip Wt. 1.2kg

Europe 8112 Heating Tip for HC1892

Model KT Air/Propane Assembly

This torch is ideal for heating up steel, driveways, burning weeds,
curing cement, and heating plastic. Any application where heat
is required.
KH825-01

Made
in
USA

Model 187 Powder Spray Torch

A hot Puddle Torch for the Powder Spraying process. Ideal
for most maintenance workshops. Kit comprises Handle,
Mixer Powder Attachment, Tip Tube, Three Tips and Plastic
Powder Tank.

Z187003 Powder Spray Torch Kit Wt.1.0kg

Z187003
18781LT Plastic Tank

Made 1879045H Powder Spray Tip No. 45
in
1879048H Powder Spray Tip No. 48
Europe
1879053H Powder Spray Tip No. 53

B187 Powder Spray Tip Tube

44A
www.harrisproductsgroup.com.au
 Self Lighting Air/Mapp Pro Torch

S
p
e
Features c
T
4 Operates on Mapp, o
TORCH: Propane & Propylene r
HSLT-604 c
4 Durable Cast Aluminium h
Construction
4 Swirl Combustion Tip
4 Operates in any Position
4 Trigger Lock for Brazing
& Soldering
4 Built-in Ignition
4 POP Hanging Clam Case
4 Fits Disposable Cylinder

MAPP PRO
DISPOSABLE CYLINDER**
**AVAILABLE IN CARTONS OF 12
ONLY
MAPP PRO
CYLINDER
4300672
Tradesmen Deserve it.....
Accountants love it

44B
www.harrisproductsgroup.com.au
 Powertorch Air/Lpg

S 601-LPG Features
p
e
c 1601032
4 Swirl Tip
T
o 4 Stainless Steel Tip
r
c 4 Quick Connect Tips to
h Handle

60SH6M+F 4 Ergonomic Handle

1400085 4 Positive on/off Valve

4 Operates in any Position
4 Quality Hose 6 Mtr
4 Compact LPG Regulator
4 Harris Renowned Quality
KIT P/N: 4400051
4 382AL Fitted to Handle
KIT P/N Air Acetylene: 4400051

TIPS SOLD
1601033
SEPARATELY

1601032 4 Swirl Tip

4 Stainless Steel Tip
4 POP Hanging Clam Case

1601031
Tradesmen Deserve it.....
Accountants love it
44C
www.harrisproductsgroup.com.au
 Scorcher Air/Lpg
This “SUPERCHARGED”
Expansion Burner is ideal for: S
p
4 Heating Steel e
c
4 Curing Concrete
4 Heating Bitumen T
o
4 Drying Applications r
c
h

601-LPG AW104

60SH6M+F

Features

4 Stainless Steel Tip

AW103
4 Positive On/Off Valve
4 Quality Hose 6 Mtr
4 Compact LPG Regulator
4 Harris Renowned Quality
KIT P/N: LAH601K
Tradesmen Deserve it.....
Accountants love it
44D
www.harrisproductsgroup.com.au
 LPG Cylinders

L
P
G LPG4.5KG
Features
C
y
l 4 AGA Approved
i
n 4 Complies to AS2469
d
4 Cost of gas is much
cheaper than SWAP & GO
4 Powder Coated

LPG9KG

44E
www.harrisproductsgroup.com.au
 Cylinder Bracket Holders

B
Features r
ALSO a
c
AVAILABLE 4 Made of Steel with k
Baked Enamel Finish e
DOUBLE t
BRACKET 4 Anti Static Strip s
4302656 4 Strong Webbing
Strap with a Steel
Cinch
4 Cylinder Bracket is
easily bolted to a
vertical surface
4 Drain Holes

4302650

Tradesmen Deserve it.....

Accountants love it
44F
www.harrisproductsgroup.com.au
 SpecialtyTorches
Harris has an extensive range of heavy duty cutting torches shown below is just one example of what is available.
A
c Features include-
Emergency cut of
c 4Tip mix design
torch stand
e 4Well balanced for operator comfort
s 4Extra high flow capacity
o 4Stainless steel head & tubes
r 4Built to specified lengths up to 18 feet
i 4Available in two or three hose configurations
4Available with 70°, 90° and 180° heads
e
4Cuts 50”
s

Hose Parts Quick Connect

6RBTH100M/S 6mm acet/oxy twin hose in a easy roll 100M spool
Couplings
6RBTH5M+F 5M long and Harris fittings/tagged in a box
HC33PF Coupler pin and left hand Nut
6RBTH10M+F 10M - Harris fittings/tagged in a box
HC22PF Coupler pin and right hand Nut
6RBTH15M+F 15M – Harris fittings/tagged in a box

CUTTING TIPS
HC32PH Coupler pin and hose Nipple
6BOTH100M/S 6mm LPG/Oxy hose on a easy roll 100M spool
HC22PH Coupler pin and hose Nipple
6BOTH5M+F 5M –Harris fittings/tagged in a box
HC33SF Coupler
6BOTH10M+F 10M – Harris fittings/tagged in a box
HC22SF Coupler
6BOTH15M+F 15M – Harris fittings/tagged in a box

8RBTH100M/S 8mm Acet/Oxy twin hose on a easy roll 100M spool

8RBTH10M+F 10M – Harris fittings/tagged in a box

Tip Cleaners
8RBTH15M+F 15M – Harris fittings/tagged in a box E9 Tip cleaner bent wire type,
8BOTH100M/S 8mm LPG/Oxy twin hose on a easy roll spool cleans cutting Oxygen
8BOTH10M+F 10M- Harris fittings/tagged in a box C9 Tip Cleaner, RAT Tail Files

8BOTH15M+F 15M – Harris fittings/tagged in a box

10BOTHM/S 10mmLPG /Oxy twin hose on a easy roll spool

10BOTH15M+F 15M -Harris fittings/tagged in a box

10BSH100M/S 10mm Oxygen single hose on a easy roll spool

12BSH100M/S 12mm Oxygen single hose on a easy roll spool

10RSH100M/S 10mm Acetylene single hose on a easy roll spool

10OSH100M/S 10mm LPG single hose on a easy roll spool

5ABSH100M/S 5mm Argon single hose on a easy roll spool

45
www.harrisproductsgroup.com.au
 Associated Items
A Accessories S
c MS-STR-4 Teflon thread tape 1/4” suitable for all gas applications p
c MS-SNOOP Leak detector with extension tube for easy direction of e
e the solution, suitable for all gases, not corrosive and c
s acceptable in Food grade
s T
o o
r r
i c
e h
s Regulator Key
A825ES Key - Sav ‘T’ Lock Regulators

A825ES

Adaptors
382AL 9/16” to 5/8” Adaptor L/H
382AR 9/16” to 5/8” Adaptor R/H
TWA290 Taper Seat Tip Adaptor
190111 Adapts J632 to H192E Mixer
190112 Adapts J633 to Precision
430111 Fits TH119 into Professional Mixers E43,
E43HC, B433, 6, 8
TH119 Twin Tip Holder ideal for 0090 Flexible Tips.
Fits H192E, H192S, B191, B192S B193 Mixers
23573 Nipple. Use with 2393 Tip Tube before fitting
heating Tips.
23579 Adapts 2290 Heating Tips to competitors S/S Tip
Tubes
37AO2 ‘Y’ Piece - Right Hand
37AA2 ‘Y’ Piece - Left Hand
AD256S LPG Straight Extension Adaptor
84790LHLPG 847 90° LH Adaptor for Inlet
84790RHOXY 847 90° RH Adaptor for Inlet
HCRGS Allows Harris Cutting Tip into competitors
Roller Guides
37AO2 Right hand ‘Y’ Piece

37AA2 Left hand ‘Y’ Piece

46
www.harrisproductsgroup.com.au
 Specialty / Scientific Equipment
S
Note: Below is only a small percentage p
of our range. Please contact Harris for
more information
e
c
i
a
l
t
y

Model HP701 High purity single

stage cylinder regulator stocked in
0-15PSI/50/PSI/125PSI

Model HP703 High purity

pipeline regulator stocked in
0-15PSI/50/PSI/125PSI
Model HP702 High purity
Made multistage cylinder regulator stocked
in in 0-15PSI/50/PSI/125PSI

Manifold Systems USA

SG 960
Fully Automatic Switchover
The SG 960 Fully Automatic Switchover Manifold for high purity gases. The
SG 960 HP can be used with oxygen, inert or fuel compressed gases. The
SG 960 LE can be used with cryogenic liquid type cylinders. The SG 960
LAM is for applications for delivery pressure up to 400 PSI. Applications
include Laser Resonator Gases, GC and MS Analytical Instruments, Process
Analytical Equipment and Applications requiring 24/7 monitoring.

• Fully automatic operation, no knob or levels to turn

• Separate control box, mechanical box and remote
alarm allows for flexibility in installation.
SG960
• Telemetry contact for web messages and monitoring.
Also provides remote monitoring of system plus
consumption data.
• Email, phone and text messaging notification, optional
modem required
• Modular system designed for expansion

SG control box

SG alarm box
47
www.harrisproductsgroup.com.au
 High Pressure Hose Leads
H
P Harris distributes a range of High Pressure Hose products. Our range of product is extensive and would simply
not fit in this catalogue.
H These high-pressure hose leads are of the highest quality with unique features and benefits designed with ‘real’
engineering advantages for the user/application.
o
s Our prices are very attractive for this product. Especially when you consider the benefits and the safety issues
e “built-in” as standard.
s
Features include- Made
4Teflon lined inner core in
4Anti Kink
4Double stainless steel braided
USA
4Anti whip-armour cased
4Each hose pressure tested
4Stamped with date and pressure rating
4Made in the USA
4Available in variety of lengths
4Corrugated metal inner core also available
4Extra high pressure also available

YES!
We install
pipeline
Inert Pipelines systems
In this range of products we have an easy, low cost range
of pipe and fittings that allow a building to be fitted with a
reticulation system. It is so easy to do, many end-users do
the install themselves. If this is not in your plans, Harris
has experienced, trained gas fitters should you require
their services. Their knowledge is of value for any type of
pipeline or application.

The savings from a pipeline are “dramatic”........in some

cases, costs have been lowered by 40%.

Harris believes that this system, combined with our anti-

surge key lock regulator (Model 847), can produce savings
of 25% minimum.

Please consider this concept and contact Harris or the

local distributor for more details. Prior to contact, measure
your floor layout and the length of your droppers and
contact Harris or your local distributor for an all-inclusive
quote.

48
www.harrisproductsgroup.com.au
 Pressure Charts
Contractor Equipment - Oxy Acetylene
C
h Oxy Acetylene Contractor Oxy Propane Contractor
a Part No. Size Cutting Oxy Fuel Part No. Size Cutting Oxy Fuel
r Thickness Pressure Pressure Thickness Pressure Pressure
t mm kPa kPa mm kPa kPa
s 3690 00AC 0-6 100-200 35 3690 00P 0-6 100-200 35
3690 0AC 6-13 150-250 35 3690 0P 6-13 150-250 35
3690 1AC 13-25 200-350 35 3690 1P 13-25 200-350 35
3690 2AC 25-75 300-450 35 3690 2P 25-75 300-450 35

Oxy Acetylene Weld, Heat & Braze Handle (19-6) Oxy Acetylene Weld, Heat & Braze Mixer (H192E)
Part No. Size Oxy Acetylene Part No. Size Oxy Acetylene
Pressure Pressure Pressure Pressure
kPa kPa kPa kPa
0090 1, 3, 5, 6, 8 50 50 5090 1, 3, 5, 6, 8 50 50
1390 1, 3, 5, 6, 8 50 50 J63 1 40 40
J63 2 50 50

Useful Data
kPa = Kilopascal psi = Pound per square inch mm = Millimetres g = Gram
Mpa = Megapascal ft3/h = Cubed feet per hour cm = Centimetres kg = Kilogram
L/min = Litres per minute Btu = British thermal unit in = inch oz = Ounce
bar = A unit of pressure cal = Calorie ft = foot lb = Pound

1 L/min = 0.0353 ft3/min = 2.118ft3/h Conversion

1 Btu = 251.98cal From To Multiply By

1 cal = 3.968 x 10-3 Btu m3/h » L/min X 16.7

L/min » m3/h X 0.06
1 in = 2.539cm
1 ft = 30.4cm ft3/h » m3/h X 0.028
m3/h » ft3/h X 35.31
1 oz = 28.35g
bar » kPa X 100
1 lb = 0.4536kg
bar » Mpa X 0.1
1 ft3/h = 0.0283159 m3/h = 28.3159 L/h = 0.472L/min
bar » psi X 14.5
bar kPa psi
1 bar = 100 kPa = 14.50 psi kPa » bar X 0.01
0.01 bar = 1 kPa = 0.1450 psi Mpa » bar X 10
0.06896 bar = 6.896 kPa = 1 psi
psi » bar X 0.069

NOTE: All tables are for use as a guide only. Specifications may change without notice. Gas abbreviations are not exact technical terms.

49
www.harrisproductsgroup.com.au
 Pressure Charts (continued)
Professional Equipment - Oxy Acetylene
C
Oxy Acetylene Professional Equipment Oxy Acetylene Gouge Torch (492,1492HC, Z142037,062043) h
Part No. Size Cutting Oxy Fuel Part No. Size Cutting Oxy Fuel a
Thickness
mm
Pressure
kPa
Pressure
kPa
Thickness
mm
Pressure
kPa
Pressure
kPa
r
6290 000 0-5 100-200 1.5 6290 1G 3-6 250 1.5 t
6290 00AC 5-10 100-200 1.5 6290 2G 5-10 350 1.5 s
6290 0AC 10-15 150-250 1.5 6290 3G 6-13 350 1.5
6290 1AC 15-25 200-350 1.5
6290 2AC 25-30 300-450 1.5 Oxy Acetylene Heating Tip (043013)
6290 3AC 50-100 300-450 1.5
6290 4AC 100-175 300-550 1.5 Part No. Size Oxy Acetylene Mixer
6290 5AC 175-200 300-550 1.5 Pressure Pressure
kPa kPa
6290 6AC 250-300 300-550 1.5
J63 1 40 40 E43, E43HC
J63 2 50 50 E43, E43HC
Oxy Acetylene Weld & Braze Handle (043013)
J63 3 60 60 E243
Part No. Size Oxy Acetylene Mixer J63 4 140 120 E243
Pressure Pressure J143 5 140 120 E243
kPa kPa
0090 1, 3, 5, 6, 8 50 50 E43, E43HC NOTE: For safety use large Bore 8mm or above with sizes 3, 4
23A90 1, 3, 5, 6, 8 50 50 E43, E43HC and 5 tips. Size 3, 4 and 5 tips exceeds the capacity of
one standard size G Acetylene cylinder (1/7 rule).

Oxy Propane Equipment

Oxy Propane Torch (For 429F, 1492F, 142033, 062043) Oxy Propane Specialty Tip (For 429, 1492F, 142033, 062043)
Part No. Size Cutting Oxy Fuel Part No. Size Cutting Oxy Fuel
Thickness Pressure Pressure Thickness Pressure Pressure
mm kPa kPa mm kPa kPa
6290 000NX 0-5 100-200 1.5 6290 NFW Rivet Washing 300 1.5
6290 00NX 5-10 150-200 1.5 6290 2NFFR Rivet Cutting 350 1.5
6290 0NX 10-15 200-300 1.5
6290 1NX 15-25 250-350 1.5 Oxy Propane Braze Tip
6290 2NX 25-50 300-400 1.5
6290 3NX 50-75 300-450 1.5 Part No. Size Oxy Propane Remarks
6290 4NX 75-150 350-550 1.5 Pressure Pressure
6290 5NX 150-200 350-550 1.5 kPa kPa
6290 6NX 200-300 350-550 1.5 0090 2N, 4N, 6N, 8N 100-210 1.5 Universal
Pressure
1390 3N, 5N, 6N, 8N 100-210 1.5 Mixing
Oxy Propane Gouge Torch (For 429F, 1492F, 142033, 062043)
Part No. Size Cutting Oxy Fuel Oxy Propane Heating Tip
Thickness Pressure Pressure
mm kPa kPa Part No. Size Oxy Propane Max. MJ
6290 1GG 3-6 250 1.5 Pressure Pressure based on
kPa kPa Flow
6290 2GG 5-10 350 1.5
6290 3GG 6-13 350 1.5 1390 H 350 50 98 MJ/HR
6290 4GG 10-19 400 1.5 2290 1H 100-200 50 186 MJ/HR
2290 2H 200-300 50 298 MJ/HR
NOTE: The low fuel gas pressure is applicable when using 2290 3H 200-500 100 532 MJ/HR
Harris universal pressure mixing systems. 2290 4H 300-600 100 663 MJ/HR
2290 5H 400-800 100-200 934 MJ/HR

NOTE: All tables are for use as a guide only. Specifications may change without notice. Gas abbreviations are not exact technical terms.

50
www.harrisproductsgroup.com.au
 NOTE: All tables are for use as a guide only. Specifications may change without notice.

Flow Rates
Cylinder Regulators
C
h Cylinder Regulator Flow Rates

a Q max ∞ m3/h P3§ Flow m3/h

r Model Ac O Air Ni Ar H He P3 bar P CO2
t 801-1.5, 821-1.5, 814-1.5, 818-1.4 14 - - - - - - 4 15 -
801-4, 821-4, 814-4, 818-4 - 21 22 23 19 - - 9 15 91
s 801-10, 821-10, 814-10, 818-10 - 54 57 58 48 - - 21 - 91
825-1.5, 829-1.5 14 - - - - - - 4 15 -
825-4, 829-4 - 21 22 22 19 84 59 9 15 91
825-10, 829-10 - 54 57 58 48 216 152 21 - 91
825-15 - 72 76 77 64 289 204 31 - 91
825-25 - 103 109 111 92 413 292 51 - 91
825-40 - 98 103 105 88 392 278 81 - 56
829-8 - 45 47 8 40 - - 17 - 91
896-1.5 10 - - - - - - 4 11 -
896-4 - 25 26 27 22 99 70 9 10 41
896-10 - 48 50 51 43 191 135 21 - 65
896-15 - 58 61 62 52 232 164 31 - 59
896-25 - 49 52 53 44 198 140 51 - 44

∞Q max - Measured at the regulator outlet with nearly empty

Pipeline Regulators
cylinder pressure (P3). This is the minimum flow
guaranteed during use from a full to empty cylin-
Pipeline Regulator Flow Rates der. Higher flows are obtainable with higher inlet
pressure.
Model Gas Max. Delivery Q max ∞ P3§ Line § P3 - Inlet (line) pressure.
Pressure m3/h Pressure Flow - Propane and CO2 are liquified gases so the flow is
bar, kPa bar, kPa measured at inlet pressures 7bar (pure Propane) and
847-1, 5 Ac 1.5bar, 150kPa 16 1.5bar, 150kPa 55bar (CO2). For CO2 regulators a heater is needed
847-4 P 4bar, 400kPa 32 5bar, 500kPa for continuous flow over 1m3/h.
847-4 O 4bar, 400kPa 97 15bar, 1500kPa NOTE: All Flows shown are measured according to the
most recent international standard (En-585,
847-10 O 10bar, 1000kPa 107 15bar, 1500kPa
ISO2503). Hoses, valves and other equipment may
847-15 O 15bar, 1500kPa 112 15bar, 1500kPa
reduce the actual flow and pressure at the point of
use. For more information and details of regulators,
refer to tables on previous pages.

Ac = Acetylene Ar = Argon F = Fuel H = Hydrogen Ni = Nitrogen O = Oxygen

Air = Compressed Air CO2 = Carbon Dioxide He = Helium NG = Natural Gas NO2 = Nitrous Oxide P = Propane

Comparison Charts
Cutting Tips Welding Tips
Metal Thickness Series 41 / 44 Tips Harris Tips Metal Thickness Series 551 Tips Harris Tips
5090, 23A90 & 1390
1-6mm 6 00
6-12mm 8 0 0.2-0.5mm - 0
12-20mm 12 1 0.5-1mm 8 1
25-75mm 15 2 1-2mm 10 3
100-125mm 20 3 2-4mm 12 5
150-200mm 24 4 4-6mm 15 6
175-250mm - 5 6-9mm 20 8
225-300mm 32 6 9-14mm - 9
14-20mm 26 10

51
www.harrisproductsgroup.com.au
 CONTACTS
HGE Pty Ltd ABN 45 102 938 876

The Harris team is committed to providing you with the very best service and support. C
We believe in putting “you” first in everything we do. o
n
Our plans are to support the Harris quality with ethical, professional management that “listens” t
to its customers. We can only learn and improve with your input, please feel free to contribute. a
c
Australia Email: sales@hgea.com.au t
s
Australia Phone: (07) 3375 3670 Fax: (07) 3375 3620
New Zealand Email: sales@harrisnz.com

52
www.harrisproductsgroup.com.au