Scribd
Upload
81 views6 pages

Compression & Vibration Test Report

This document summarizes the results of compression and vibration tests on packaging for Himalia Feet. The compression test showed the packaging passed with a burst strength of 244.62 psi. The vibration test subjected the packaging to 205/200 cycles per minute for 71 minutes without any product damage. Suggestions are made to reduce the box width by 13mm and add round stickers to improve the packaging design while maintaining protection and sustainability standards.

Uploaded by

chudinhthu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views6 pages

Compression & Vibration Test Report

This document summarizes the results of compression and vibration tests on packaging for Himalia Feet. The compression test showed the packaging passed with a burst strength of 244.62 psi. The vibration test subjected the packaging to 205/200 cycles per minute for 71 minutes without any product damage. Suggestions are made to reduce the box width by 13mm and add round stickers to improve the packaging design while maintaining protection and sustainability standards.

Uploaded by

chudinhthu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Compression Test report

Vendor name Testing date

Product Himalia Feet Brand & Sourcing


HK sourcing
description Office
Transit box size
LxWxH 340 x 255 x 200 No. of stacking layer 12 layers
(mm)
Double Wall Corrugated
Box Structure Box flute direction Correct
BC - Flute (7mm +/- 2mm)
Burst Strength Edge Crush Test
244.62 50.52
(psi) (lbs/inch)
Main internal Secondary internal
Corrugated board fitment NA
protection protection
Sealing Method Tape Most fragile areas Product surface finishing
Gross weight
9.55 EAN code 5059340017846
(lbs)
Safety factor 3 Testing method Apply & release
Calculated test Actual test loading
9.55 x (12-1) x 3 x 1.4 = 441.2 442
loading (lbs) (lbs)
Photo before test Photo after test

Photos

Remark: No deformation after the test


Test result PASS
Test done by Jeff Lee Approved by Ricky Law
Vibration Test report
Testing Fixed displacement vibration -
Testing date June 12, 2023 (1st test)
method rotated 90 degree halfway
Cycles per Test duration
205/200 35 + 36 = 71
minute in minutes
Photos before the test

Photos after the test

Photos

Width of the box can be reduced


It can be reduced
by up to 13mm

Total 12pcs/ transit box


Height of the
box is fit now

Corrugated board fitment

Built-in corrugated board design


separating 2pcs of feet

The IM is put in a slot


behind the corrugated
board separator
No product damages found on the samples after the test. Please see the following
suggestion:

1) Width of the transit box can be reduced


2) Add round sticker on top opening and bottom closure

Current transit box size: 340 x 255 x 200mm


Suggested box size: 327 x 255 x 200mm (about 4% reduction compared to current
Remark packaging)

Important Note:
All plastic packaging to contain a minimum 30% recycled content.
(GRS or equivalent certification is required)

All paper and board packaging used to be 100% sustainably sourced.


(FSC or PEFC is required)

Test result: PASS

Packaging review from 3 perspective


Test result Sustainability: Satisfactory (if vendor can provide relevant FSC/GRS cert or
self declaration letter)
Optimization: Fair
Protection: Satisfactory
Test done by Jeff Lee Approved by Ricky Law

You might also like