Scribd
Upload
664 views2 pages

Surtec 086: Protection Upgraded

SurTec 086 is a recyclable spray surfactant that is liquid and sprayable above 40°C. It contains an effective combination of surfactants and can be combined with alkaline, neutral, or acid builders. It has demulsifying and defoaming properties and is suited for use in vibratory finishing. The surfactant should be used at a concentration of 0.3-1% along with a builder at temperatures above 40°C. Regular analysis and adjustment of builder concentration is recommended when using SurTec 086.

Uploaded by

Nguyen Van Khoa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
664 views2 pages

Surtec 086: Protection Upgraded

SurTec 086 is a recyclable spray surfactant that is liquid and sprayable above 40°C. It contains an effective combination of surfactants and can be combined with alkaline, neutral, or acid builders. It has demulsifying and defoaming properties and is suited for use in vibratory finishing. The surfactant should be used at a concentration of 0.3-1% along with a builder at temperatures above 40°C. Regular analysis and adjustment of builder concentration is recommended when using SurTec 086.

Uploaded by

Nguyen Van Khoa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Protection upgraded

SurTec® 086
Recyclable Spray Surfactant

Properties
 liquid
 sprayable above 40°C
 extremely effective combination of surfactants
 recyclable in combination with builder as SurTec 131,
SurTec 132, SurTec 136, SurTec 138 and SurTec 140
 demulsifying
 can be combined with alkaline, neutral or acid builder
 with defoaming properties in soak applications
 suited for vibratory finishing

Application
make-up value: SurTec 086 0.3-1 %
+ builder

temperature: > 40°C

application time: depending on the instructions of the chosen builder

Technical Specification
(at 20°C) Appearance Density (g/ml) pH-value (at 20 g/l)

SurTec 086 liquid, colourless-yellowish 1.003 (0.99-1.01) 5.7 (5.4-8.6)

Maintenance and Analysis


Analyse and adjust the concentration of the builder regularly.

Replenish SurTec 086 proportional to the dosage of the builder (e.g. a dosage of
3 % builder requires an addition of 0.3 % tenside booster SurTec 086 Spray Surfactant).

Ingredients
 nonionic surfactants

page 1
Product Safety and Ecology
Classification and designation are noted in the Material Safety Data Sheets (according to the
European legislation).The safety instructions and the instructions for environmental protection
have to be followed in order to avoid hazards for people and environment. Please consider the
explicit details in our Material Safety Data Sheets.

Warranty
We are responsible for our products in the context of the valid legal regulations. The warranty
exclusively accesses for the delivered state of a product. Warranties and claims for damages
after the subsequent treatment of our products do not exist. For details please consider our
general terms and conditions.

Further Information and Contact


If you have any questions concerning the process, please contact your local technical
department.

For further information and contact details please visit our homepage:
http://www.SurTec.com

3 March 2014/DK, UK

page 2

You might also like