WWW.PHIHONG.
COM
90W Single Port Multi-Gig Power over Ethernet Midspan
IEEE802.3bt Compliant Power Injector
Features
• IEEE802.3bt Compliant • 4 Pair Powering +3,6,4,5 / - 1,2,7,8
• Diagnostic LEDs • Full Protection OCP, OVP
• Compliant with Phihong Proprietary • Single Source 4 Pair Power Current
12.5K Detection Sharing
• 1 Year Warranty • Broken Wire Detection
• Gigabit Compatible • Limited Power Source
• Shielded DC Jacks • DoE Level VI Compliant1
Applications
• Satellite Receiver • Security Cameras
• Wireless Network Access Points • Kiosks
• LCD Displays • Computer Workstations
Safety Approvals
• UL/cUL 60950-1 • IEC60950-1
• UL/cUL 62368-1 • IEC62368-1
• AS/NZ 623682 • CE
Mechanical Characteristics (Standard Model)
• Length: 166mm (6.53in) • Height: 43.6mm (1.72in)
• Width: 80mm (3.15in) • Weight: 500g(1.1lbs)
Output Specifications
DC Load Regulation3
Model Data Speed Output
Voltage Min. Max.4 Line Load
POE90U-1BT6-R 1G 56V >10mA 1.6A 54-57V
POE90U-1BT-N6-R5 1G 56V >10mA 1.6A 54-57V
POE90U-1BT-2-R6 2.5G 56V >10mA 1.6A 54-57V
POE90U-1BT-5-R 5G 56V >10mA 1.6A 54-57V
POE90U-1BT-X-R6 10G 56V >10mA 1.6A 54-57V
Notes:
1. Except POE90U-1BT-N6-R
2. POE90U-1BT-2-R model only
3. Voltage measured within 2” of the output RJ45 connector on data pairs 3,6(+) and 1,2(-)
4. Combined output on data pairs and spare pairs. Otherwise 800mA on data pairs 3,6(+) 1, 2(-) and spare pairs 4,5(+) 7,8(-)
5. SNMP option. Special order MOQ
6. Special order MOQ
Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for
the most up-to-date specifications and contact information. Revision 2/28/2023
POE90U-1BT-X Characteristics1 WWW.PHIHONG.COM
INPUT: Isolation Test
AC Input Voltage Range Primary to Secondary:
90 to 264VAC 4242VDC for 1 minute 10mA
Primary to Field Ground:
AC Input Voltage Rating 2121VDC for 1 minute
100 to 240VAC, 47-63Hz
Immunity
AC Input Current EN 55035
2.5A (RMS) maximum for 90VAC IEC61000-3-2 (Harmonic) Class A
1.2A (RMS) maximum for 240VAC IEC61000-3-3
IEC61000-4-2 (ESD) 6KV Contact/8KV Air
Leakage Current IEC61000-4-3 (RS) 3V/m
3.5mA maximum @ 264VAC 50Hz IEC61000-4-4(EFT) 1KV Input 0.5KV Output
IEC61000-4-5 (Surge) 1KV L-L, 2KV L-PE
AC Inrush Current IEC61000-4-6 (CS) 3V
50A (RMS) maximum for 115VAC IEC 61000-4-8 1A/m
75A (RMS) maximum for 230VAC IEC61000-4-11 (Dips) Class 3
OUTPUT: Insulation Resistance
Total Output Power Primary to Secondary: >10M OHM 500VDC
90W Primary to Field Ground: >10M OHM
500VDC
Ripple and Regulation
200mV max @25C, 100-240VAC MTBF3
>150,000 Hours Min, Full Load, 115VAC
Efficiency2 25ºC
DOE Level VI
FEATURES:
Hold-up Time Over Current Protection
10mS min. 120VAC 60Hz max load Output #1(OUT) <1000mA
Output #2(OUT) <1000mA
ENVIRONMENTAL: Output #1 and #2 combined(OUT) <2000mA
Temperature
Operation -20°C to +40°C Over Voltage Protection
Non-operation -20°C to +65°C Voltage between 2 SELV conductors shall not
Humidity 5 to 90% exceed 42.4Vpk or 60VDC for longer than
0.2seconds. Moreover a limit of 71VPK or
EMC 120VDC shall not be exceeded. – Latching.
Complies with FCC Class B
Complies with EN55032 Class B Short Circuit Protection
The output can be shorted permanently without
damage
Revision 2/28/2023
POE90U-1BT-X Characteristics WWW.PHIHONG.COM
LED Indicators LED Indicators
POE90U-1BT6-R, POE90U-1BT-N6-R : POE90U-1BT-2-R, POE90U-1BT-5-R,
No LED - Power failure POE90U-1BT-X-R:
Blue LED On – Power ON No LED - Power failure
Red LED short/slow Blinking - POE power Blue LED On – Power ON
ready but no connection Amber LED short/slow Blinking - POE
Green LED solid - POE output power good power ready but no connection
Red/Green LED alternate short blinking – Green LED solid - POE output power good
POE detection failure Amber/Green LED alternate short blinking –
Red LED long/fast blinking – POE output POE detection failure
over power or short Amber LED long/fast blinking - POE
Green LED Blink – Invalid load condition output over power or short
Green LED Blink – Invalid load condition
Input Connector
IEC320 inlet 3 pin
Output Connection
+pins 3,6,4,5 / -pins 1,2,7,8
Revision 2/28/2023
Outline Diagram (mm) POE90U-1BT6-R
Revision 2/28/2023
Outline Diagram (mm) POE90U-1BT-N6-R
Revision 2/28/2023
Outline Diagram (mm) POE90U-1BT-2-R, POE90U-1BT-5-R, POE90U-1BT-X-R
Revision 2/28/2023
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Phihong USA Corporation
47800 Fremont Boulevard
Fremont, CA 94538
Telephone: (510) 445-0100
www.phihong.com
This device complies with/The devices in this product series comply with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Revision 2/28/2023
