8.
AIR CONDITIONER AND HEATER
1) CLEAN AND REPLACE OF OUTER FILTER
※ Always stop the engine before servicing.
(1) Open the door, loosen the wing bolt and remove
the outer filter.
Outer filter
77076MI49
(2) Clean the filter using a pressurized air(Below
2kgf/cm2, 28psi).
When using pressurized air, be sure to safety
glasses.
(3) Inspect the filter after cleaning. If it is damaged
or badly contaminated, use a new filter.
2
Pressurized air 2kgf/cm below
77076MI50
2) CLEAN AND REPLACE OF INNER FILTER
※ Always stop the engine before servicing.
(1) Open the cover.
(2) Remove the inner filter. Cover
Inner filter
77076MI51
(3) Clean the inner filter using a pressurized
air(Below 2kgf/cm2, 28psi) or washing with water.
When using pressurized air, be sure to wear
safety glasses.
(4) Inspect the filter after cleaning. If it is damaged
or badly contaminated, use a new filter.
※ Dry off after washing with water. Pressurized air 2kgf/cm2 below
73036MI19
6-49
3) PRECAUTIONS FOR USING AIR CONDITIONER
(1) When using the air conditioner for a long time,
open the window once every one hour.
(2) Be careful not to overcool the cab.
(3) The cab is properly cooled if the operator feels
cool when entering there from outside(About 5°C
lower than the outside temperature).
(4) When cooling, change air occasionally.
4) CHECK DURING SEASON
Ask the service center for replenishment of
refrigerant or other maintenance service so that
the cooling performance is not damaged.
5) CHECK DURING OFF-SEASON
Operate the air conditioner 2 or 3 times a month
(Each for a few minutes) to avoid loss of oil film in
the compressor.
6-50