Scribd
Upload
215 views2 pages

Repeater Panel

This document provides instructions for connecting and using a repeater panel with fire alarm panels. It includes: 1. Diagrams showing a redundant network of up to 32 fire alarm panels connected via repeater panels. 2. Details of the terminal connections on the repeater panel for loop input/output, power supply, and USB programming. 3. A connection diagram depicting two fire alarm panels connected to a repeater panel via redundant network modules.

Uploaded by

phuong dao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
215 views2 pages

Repeater Panel

This document provides instructions for connecting and using a repeater panel with fire alarm panels. It includes: 1. Diagrams showing a redundant network of up to 32 fire alarm panels connected via repeater panels. 2. Details of the terminal connections on the repeater panel for loop input/output, power supply, and USB programming. 3. A connection diagram depicting two fire alarm panels connected to a repeater panel via redundant network modules.

Uploaded by

phuong dao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FIGURE 1

Up to 32 panels in a redundant network

FIRE PANEL
FIRE PANEL FIRE PANEL

Repeater Panel
REDUNDANT REDUNDANT REDUNDANT
NETWORK NETWORK NETWORK
MODULE MODULE MODULE

IN OUT IN OUT IN OUT IN OUT

External power
supply unit
24VDC

FIGURE 2 FIGURE 3

NETWORK FIRE
PANEL Fire Alarm Panel Fire Alarm Panel

Module 1 Module 2 Repeater Panel


Redundant Network Redundant Network
REDUNDANT
REDUNDANT LED2 NETWORK Rx Tx Rx Tx Rx Tx Rx Tx Tx Rx Tx Rx
MODULE
CPU

LED3 LED1
Rx Tx Rx Tx

- Tx - Rx
+ Tx + Rx
- Rx - Tx
+ Rx + Tx

Connection between Redundant module and Fire Panel


Repeater Panel - Instruction Manual
ATTENTION!
Operation with Repeater Panel
1. Description of the terminal rows is supported for the following revisions:
Fire Alarm Panel
LCD PCB Hardware revision: 2.4 and higher
MAIN Board Firmware revision: 4.2 and higher
Fire Alarm Panel
MAIN Board Firmware revision: 2.8 and higher

Tx Rx Tx Rx 24 VDC Micro Technical Characteristics:


Loop IN Loop OUT Power Supply USB Power Supply: (24 ± 4) VDC
Max. consumption: 0.11A
Loop IN - Connect the input line for communication Communication - RS485
Loop OUT - Connect the output line for communication
Power Supply - Power supply for the repeater panel: Twisted pair cable:
- Use external 24VDC power supply unit; - Length - max. 1000m (between repeater - fire panel)
- Use the AUX output of the fire alarm panel. - Cross Section - 0.5 - 2.5mm2
Micro USB - Micro USB input for programming and firmware update

2. Connection Diagram

Fire Alarm Panel Fire Alarm Panel

Repeater Panel Module 1 Module 2


Redundant Network Redundant Network

Tx Rx Tx Rx Rx Tx Rx Tx Rx Tx Rx Tx

- Rx
+ Rx + Rx
- Rx - Tx
+ Tx + Tx
- Tx

You might also like