SC-6T
6.5” Component Speaker / 80w RMS
• Zolon Coated Low Resonance Basket
• White Zirconium Coated Cone
• Rubber Surround
• 1” Aluminum Voice Coil
• 13mm Super Dome Tweeter
• White Terminal Connections
• Rubber Magnet Cover
• 20oz. Magnet
• Impedance: 4 Ohm
• Freq-Response: 70-20kHz
• Sensitivity: 92dB
SF-693T
6x9” 3-way Speaker / 100w RMS SF-652T
6.5” 2-way Speaker / 60w RMS
• Zolon Coated Low Resonance Basket
• White Zirconium Coated Cone • Zolon Coated Low Resonance Basket
• Rubber Surround • White Zirconium Coated Cone
• 1” Aluminum Voice Coil • Rubber Surround
• 13mm Super Dome Tweeter • 1” Aluminum Voice Coil
• Piezo Tweeter • 13mm Super Dome Tweeter
• White Terminal Connections • White Terminal Connections
• Rubber Magnet Cover • Rubber Magnet Cover
• 25oz. Magnet • 5.4oz. Magnet
• Impedance: 4 Ohm • Impedance: 4 Ohm
• Freq-Response: 60-20kHz • Freq-Response: 70-20kHz
• Sensitivity: 92dB • Sensitivity: 92dB
SW-12RE International product
Dual 4 Ohm 12” Subwoofer
• 250w Continuous Power Handling
• Black Zirconium Coated Injection Cone
• NBR-Rubber Surround
• 2” KSV Kapton Voice Coil
• Nickel Plated 8ga. Compression Wire Terminal
• Poly Cotton Spider
• Red Texture Coat Finish on Stamped Steel Basket
• Suspension Integrated Tinsel Leads
• Vented Pole Piece
• 45oz Magnet
SW-12SE
Dual 4 Ohm 12” Subwoofer
• 250w Continuous Power Handling
• Black Zirconium Coated Injection Cone
• NBR-Rubber Surround
• 2” KSV Kapton Voice Coil
• Nickel Plated 8ga. Compression Wire Terminal
• Poly Cotton Spider
• Silver Texture Coat Finish on Stamped Steel Basket
• Suspension Integrated Tinsel Leads
• Vented Pole Piece
• 45oz Magnet
Stealth-13BX
Stealth-13BX is an engineered enclosure pre-loaded with a Stealth-13” woofer. Stealth-
13BX was designed with the truck owner in mind. Its shallow depth, only 5” at the
bottom, makes it an ideal fit behind the seat of a standard cab, or the rear seats of a full
size truck. It is also beneficial as a space saver in the trunk of a sedan, or cargo area of
an SUV.
All that is needed to bring-on-the-thump is a small 2-channel amplifier that, when bridged
with a 4 ohm load, generates 200 watts. This slim-fit design has a low-end frequency
response of 20-500Hz, definitely covering the range of any bass notes from your favorite
track.
SE-3840
3-way Active Crossover w / Subwoofer Level Control
• 32-400Hz High Pass Filter w/ x20 Multiplier
• 45-250Hz Low Pass Filter w/ x20 Multiplier
• Variable 25-100Hz 0-18dB Bass Boost
LW1.840D
• Front, Rear, Sub Input w/ Output Level Control
• 2/4/5 Input Channel Selector Switch
• Remote Subwoofer Level Control Included International product
• 5.5”w x 6.75”t x 1.75”h
Mono-Block Class D Amplifier / 840w
• 680w x 1 @ 2 Ohm
• 950w x 1 @ 1 Ohm
• Total Harmonic Distortion: 0.50%
• Frequency Response: 15-150Hz
• Signal to Noise Ratio: 61dB
• Damping Factor: >300
• Input Sensitivity 100mV - 8V
• 50-150Hz, 12dB Low Pass Filter
• 15-40Hz, 12dB Subsonic Filter
• 40Hz, 0-18dB Bass Boost
• 1800 Phase Switch
• Midnight Black Finish w/ Brushed Accents
• Remote Gain Control
• Input Sensitivity Selector
• MOSFET Power Supply
• PWM (Pulse Width Modulation) System
• Glass/Epoxy Printed Circuit Boards
• Nickel-Plated RCA Input and Bypass Output Jacks
RUB1.800D
• Nickel Plated Speaker and Power Terminals
• Dimensions (cm): 20.3w x 5h x 31.4L
Mono-Block Class D Amplifier / 840w
• 680w x 1 @ 2 Ohm International product
• 950w x 1 @ 1 Ohm
• Total Harmonic Distortion: 0.50%
• Frequency Response: 15-150Hz
• Signal to Noise Ratio: 61dB
• Damping Factor: >300
• Input Sensitivity 100mV - 8V
• 50-150Hz, 12dB Low Pass Filter
• 15-40Hz, 12dB Subsonic Filter
LW4.300E
• 40Hz, 0-18dB Bass Boost
• 1800 Phase Switch
• Midnight Blue Finish w/ Brushed Accents
• Remote Gain Control International product
• Input Sensitivity Selector Class A/B 4 Ch. Amplifier
• MOSFET Power Supply
• PWM (Pulse Width Modulation) System • 100w x 4 @ 4 Ohm
• Glass/Epoxy Printed Circuit Boards • 150w x 4 @ 2 Ohm
• Nickel-Plated RCA Input and Bypass Output Jacks • 300w x 2 @ 4 ohm Bridged
• Nickel Plated Speaker and Power Terminals • Total Harmonic Distortion: 0.01%
• Dimensions (cm): 20.3w x 5h x 31.4L • Frequency Response: 20-50 kHz
• Signal to Noise Ratio: 103dB
• Damping Factor: >180
• Input Sensitivity 100mV - 6V
• 200Hz High Pass Filter
• 35-200Hz, 12dB Low Pass Filter
• Variable 0-18dB Bass Boost
• Midnight Black Finish w/ Brushed Accents
• Remote Gain Control
• High & Low Level Input
• MOSFET Power Supply
• PWM (Pulse Width Modulation) System
• Glass/Epoxy Printed Circuit Boards
• Nickel-Plated RCA Input and Bypass Output Jacks
• Nickel Plated Speaker and Power Terminals
