Product Data Sheet
Product Group 31 – Combustion Additives
OctamarTM Complete
Product Description Product Benefits
OctamarTM Complete is a highly concentrated • Improves combustion
combustion improving additive, formulated to
optimize the combustion of residual marine fuel • Maintains overall engine efficiency
oils. Faster and more complete burn-out of carbon
and hydrocarbon will reduce deposits in the engine • Improves fuel economy
and exhaust system and significantly lower
emissions of unburned carbon (particulates) to the • Maintains turbocharger and economizer
atmosphere. Maintained cleanliness and efficiency cleanliness and efficiency
of engine and T/C will enable optimum perfor-
mance between recommended overhaul intervals. • Reduces piston fouling
Due to reduced soot particles in the post • Reduces unburned carbon deposits in
combustion flue gas, it might benefit efficiency of
exhaust system and pollution of environment
scrubbers for SOx removal. The dispersant-
stabilizer prevents fuel from stratification and the • Significantly reduces particulate matter
asphaltenes from agglomerating. This will reduce
sludge formation in fuel tanks and helps to keep • Less soot particulates on deck
separators, filters, fuel heaters, viscometers and
injector (burner) tips clean, resulting in less • Substantially reduces the risk of economizer
maintenance and downtime. Octamar™ Complete fires
should be also a solution for VLSFO for emergency
use, especially for fuel homogenation and com- • Reduces fuel sludge up to 50 %
bustion improvement.
• Maintains HFO stability at on board storage
temperature up to 12 months
Physical Properties • Increases tolerance and compatibility for
Appearance...................................dark amber liquid blending of heavy and light fuel components
Density, 15 °C...........................................920 kg/m3
Flash Point, ...................................................> 60°C • Inhibits or strongly reduces storage tank sludge
formation
Application and Dosage • Improves atomisation
For best results, OctamarTM Complete should be
injected into the fuel transfer line to the day tanks • VLSFO – prevent issues related to fuels
or settling tank via a chemical metering pump. commingling like separation, sludge formation
The normal dosage of OctamarTM Complete, for and filter clogging
residual marine fuel, is 1:6,000 (1 litre for 6.0
tonnes of fuel). Alternative dosages may be
recommended based on fuel quality or operational • ISO 9001 & 14001 certified by DNV
conditions. Innospec personnel are always
available to assess your specific problems and
• EU Origin
advise a suitable product(s) and dosage program.
Packaging and Storage
OctamarTM Complete is supplied in 200-litre (53 - continued overleaf -
gallon) non-returnable steel drums. Other pack
sizes are available on request. Store OctamarTM
Complete away from heat, sparks and open flame
and at temperature above 0°C.
M PDS OctamarTM Complete Issue 4, 19 August 2019
OctamarTM Complete
Precautionary Statement First Aid
Use only in approved manner. Do not contaminate HARMFUL IF SWALLOWED. CONTACT WITH
drinking water. Dispose of empty container in SKIN OR EYES CAN CAUSE IRRITATION.
accordance with local, state and federal rules. Do KEEP OUT OF REACH OF CHILDREN!
not re-use empty container. Avoid inhalation of
fumes. When handling, use rubber gloves and SKIN: Flush with water and wash with soap and
face shield, wash after handling. Consult Innospec water. Remove contaminated clothing. Get
for questions and specific directions for use. medical attention if irritation continues.
Buyer assumes all risks of storage or handling of EYES: Flush with cool water for at least 15
this material that are not in strict accordance with minutes and get medical attention immediately.
directions given. Consult the MSDS sheet for
additional information. Store in a dry place away INHALATION: Remove affected person to fresh
from food stuffs with the lid tightly closed. For air. Get medical attention immediately.
commercial use only. INGESTION: Do not induce vomiting. Drink large
amounts of water. Do not give an unconscious
person anything to drink. Get medical attention
immediately.
For further information about our products & services please contact your nearest
Innospec Customer Service Centre:
North America Greece, Turkey
Marine Specialties Marine Specialties
Customer Service Centre - USA Customer Service Centre - Greece & Turkey
8310 South Valley Highway, Suite 350 11, II Merarchias Street,
Englewood, Colorado 80112 Piraeus - 185 35
USA Greece
Tel: +1 303-792-5554 Tel: +30 210 411 0727 / 8
In USA & Canada: 800-873-8711 Fax: +30 210 411 0748
e-mail: csc.americas@innospecinc.com e-mail: csc-gt@innospecinc.com
Europe, Middle East, Africa Asia Pacific
Marine Specialties Marine Specialties
Customer Service Centre - EMEA Customer Service Centre - Asia Pacific
P.O. Box 53156 47 Scotts Road, #02-03 Goldbell Towers
3301 Limassol Singapore 228233
Cyprus Tel : +65 6336 6286
Tel: +357 25 762 535 Fax : +65 6336 1692
Fax: +357 25 762 545 e-mail: csc.AsiaPacific@innospecinc.com
e-mail: csc-emea@innospecinc.com
The information contained in this document is provided free of charge and is based on technical data that Innospec believes to be reliable. It is intended
for use by persons having technical skill and at their own discretion and risk. Innospec accepts no liability for any loss, damage or expense arising from, or
in connection with, the use of the information. Furthermore, none of the contents of this publication should be taken as a licence to operate under any
patent, nor as a recommendation to infringe any patent.
M PDS OctamarTM Complete Issue 4, 19 August 2019
